Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 22 6月, 2005 8 次提交
    • J
      [PATCH] ia64 uncached alloc · f14f75b8
      由 Jes Sorensen 提交于 
      This patch contains the ia64 uncached page allocator and the generic
allocator (genalloc).  The uncached allocator was formerly part of the SN2
mspec driver but there are several other users of it so it has been split
off from the driver.

The generic allocator can be used by device driver to manage special memory
etc.  The generic allocator is based on the allocator from the sym53c8xx_2
driver.

Various users on ia64 needs uncached memory.  The SGI SN architecture requires
it for inter-partition communication between partitions within a large NUMA
cluster.  The specific user for this is the XPC code.  Another application is
large MPI style applications which use it for synchronization, on SN this can
be done using special 'fetchop' operations but it also benefits non SN
hardware which may use regular uncached memory for this purpose.  Performance
of doing this through uncached vs cached memory is pretty substantial.  This
is handled by the mspec driver which I will push out in a seperate patch.

Rather than creating a specific allocator for just uncached memory I came up
with genalloc which is a generic purpose allocator that can be used by device
drivers and other subsystems as they please.  For instance to handle onboard
device memory.  It was derived from the sym53c7xx_2 driver's allocator which
is also an example of a potential user (I am refraining from modifying sym2
right now as it seems to have been under fairly heavy development recently).

On ia64 memory has various properties within a granule, ie.  it isn't safe to
access memory as uncached within the same granule as currently has memory
accessed in cached mode.  The regular system therefore doesn't utilize memory
in the lower granules which is mixed in with device PAL code etc.  The
uncached driver walks the EFI memmap and pulls out the spill uncached pages
and sticks them into the uncached pool.  Only after these chunks have been
utilized, will it start converting regular cached memory into uncached memory.
Hence the reason for the EFI related code additions.
Signed-off-by: NJes Sorensen <jes@wildopensource.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      f14f75b8
    • B
      [PATCH] mm: remove PG_highmem · cbe37d09
      由 Badari Pulavarty 提交于 
      Remove PG_highmem, to save a page flag.  Use is_highmem() instead.  It'll
generate a little more code, but we don't use PageHigheMem() in many places.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      cbe37d09
    • W
      [PATCH] Avoiding mmap fragmentation · 1363c3cd
      由 Wolfgang Wander 提交于 
      Ingo recently introduced a great speedup for allocating new mmaps using the
free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and
causes huge performance increases in thread creation.

The downside of this patch is that it does lead to fragmentation in the
mmap-ed areas (visible via /proc/self/maps), such that some applications
that work fine under 2.4 kernels quickly run out of memory on any 2.6
kernel.

The problem is twofold:

  1) the free_area_cache is used to continue a search for memory where
     the last search ended.  Before the change new areas were always
     searched from the base address on.

     So now new small areas are cluttering holes of all sizes
     throughout the whole mmap-able region whereas before small holes
     tended to close holes near the base leaving holes far from the base
     large and available for larger requests.

  2) the free_area_cache also is set to the location of the last
     munmap-ed area so in scenarios where we allocate e.g.  five regions of
     1K each, then free regions 4 2 3 in this order the next request for 1K
     will be placed in the position of the old region 3, whereas before we
     appended it to the still active region 1, placing it at the location
     of the old region 2.  Before we had 1 free region of 2K, now we only
     get two free regions of 1K -> fragmentation.

The patch addresses thes issues by introducing yet another cache descriptor
cached_hole_size that contains the largest known hole size below the
current free_area_cache.  If a new request comes in the size is compared
against the cached_hole_size and if the request can be filled with a hole
below free_area_cache the search is started from the base instead.

The results look promising: Whereas 2.6.12-rc4 fragments quickly and my
(earlier posted) leakme.c test program terminates after 50000+ iterations
with 96 distinct and fragmented maps in /proc/self/maps it performs nicely
(as expected) with thread creation, Ingo's test_str02 with 20000 threads
requires 0.7s system time.

Taking out Ingo's patch (un-patch available per request) by basically
deleting all mentions of free_area_cache from the kernel and starting the
search for new memory always at the respective bases we observe: leakme
terminates successfully with 11 distinctive hardly fragmented areas in
/proc/self/maps but thread creating is gringdingly slow: 30+s(!) system
time for Ingo's test_str02 with 20000 threads.

Now - drumroll ;-) the appended patch works fine with leakme: it ends with
only 7 distinct areas in /proc/self/maps and also thread creation seems
sufficiently fast with 0.71s for 20000 threads.
Signed-off-by: NWolfgang Wander <wwc@rentec.com>
Credit-to: "Richard Purdie" <rpurdie@rpsys.net>
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu> (partly)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      1363c3cd
    • D
      [PATCH] Hugepage consolidation · 63551ae0
      由 David Gibson 提交于 
      A lot of the code in arch/*/mm/hugetlbpage.c is quite similar.  This patch
attempts to consolidate a lot of the code across the arch's, putting the
combined version in mm/hugetlb.c.  There are a couple of uglyish hacks in
order to covert all the hugepage archs, but the result is a very large
reduction in the total amount of code.  It also means things like hugepage
lazy allocation could be implemented in one place, instead of six.

Tested, at least a little, on ppc64, i386 and x86_64.

Notes:
	- this patch changes the meaning of set_huge_pte() to be more
	  analagous to set_pte()
	- does SH4 need s special huge_ptep_get_and_clear()??
Acked-by: NWilliam Lee Irwin <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      63551ae0
    • M
      [PATCH] VM: early zone reclaim · 753ee728
      由 Martin Hicks 提交于 
      This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.cSigned-off-by: NMartin Hicks <mort@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      753ee728
    • I
      [PATCH] smp_processor_id() cleanup · 39c715b7
      由 Ingo Molnar 提交于 
      This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      39c715b7
    • S
      [PATCH] x86_64: TASK_SIZE fixes for compatibility mode processes · 84929801
      由 Suresh Siddha 提交于 
      Appended patch will setup compatibility mode TASK_SIZE properly.  This will
fix atleast three known bugs that can be encountered while running
compatibility mode apps.

a) A malicious 32bit app can have an elf section at 0xffffe000.  During
   exec of this app, we will have a memory leak as insert_vm_struct() is
   not checking for return value in syscall32_setup_pages() and thus not
   freeing the vma allocated for the vsyscall page.  And instead of exec
   failing (as it has addresses > TASK_SIZE), we were allowing it to
   succeed previously.

b) With a 32bit app, hugetlb_get_unmapped_area/arch_get_unmapped_area
   may return addresses beyond 32bits, ultimately causing corruption
   because of wrap-around and resulting in SEGFAULT, instead of returning
   ENOMEM.

c) 32bit app doing this below mmap will now fail.

  mmap((void *)(0xFFFFE000UL), 0x10000UL, PROT_READ|PROT_WRITE,
	MAP_FIXED|MAP_PRIVATE|MAP_ANON, 0, 0);
Signed-off-by: NZou Nan hai <nanhai.zou@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      84929801
    • D
      [SPARC64]: Fix cmsg length checks in Solaris emulation layer. · 8005aba6
      由 David S. Miller 提交于 
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8005aba6
  3. 21 6月, 2005 9 次提交
  5. 20 6月, 2005 13 次提交
  7. 19 6月, 2005 1 次提交
  9. 18 6月, 2005 2 次提交
  11. 17 6月, 2005 3 次提交
  13. 15 6月, 2005 2 次提交
  15. 14 6月, 2005 2 次提交