The memory region where adjacency entries (nexthops) are stored is
called the KVD linear and is configured during initialization with a
size of 64K.

Extend this area with 32K more entries, that will be partitioned into 64
groups of 0.5K entries, thereby allowing us to support weighted nexthops
with high accuracy.

Change the ratio between both types of hash entries, so as to prevent
reduction in the number of double hash entries, which are used for IPv6
neighbours and routes with a prefix length greater than 64.

Note that the user will be able to control all these sizes once the
devlink resource manager is introduced.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Up until now the driver assumed all the nexthops have an equal weight
and wrote each to a single adjacency entry.

This patch takes the `weight` parameter into account and populates the
adjacency group according to the relative weight of each nexthop.

Specifically, the weights of all the nexthops that should be offloaded
are first normalized and then used to calculate the upper adjacency
index of each nexthop. This is done according to the hash-threshold
algorithm used by the kernel for IPv4 multi-path routing.

Adjacency groups are currently limited to 32 entries which limits the
weights that can be used, but follow-up patches will introduce groups of
512 entries.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The device has certain restrictions regarding the size of an adjacency
group.

Have the router determine the size of the adjacency group according to
available KVDL allocation sizes and these restrictions.

This was not needed until now since only allocations of up 32 entries
were supported and these are all valid sizes for an adjacency group.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As the first step towards non-equal-cost multi-path support, store each
nexthop's weight.

For IPv6 nexthops always set the weight to 1, as it only supports ECMP.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current KVDL allocation API allows the user to specify the requested
number of entries, but the user has no way of knowing how many entries
were actually allocated.

This works because existing users (e.g., router) request the exact
number they end up using. With the introduction of large adjacency
groups, this will change, as the router will have the ability to choose
from several allocation sizes, where larger allocations provide higher
accuracy with respect to requested weights and better resilience against
nexthop failures.

One option is to have the router try several allocations of descending
size until one succeeds, but a better way is to simply allow it to query
the actual allocation size and then size its request accordingly.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The KVD linear (KVDL) allocator currently consists of a very large
bitmap that reflects the KVDL's usage. The boundaries of each partition
as well as their allocation size are represented using defines.

This representation requires us to patch all the functions that act on a
partition whenever the partitioning scheme is changed. In addition, it
does not enable the dynamic configuration of the KVDL using the
up-coming resource manager.

Add objects to represent these partitions as well as the accompanying
code that acts on them to perform allocations and de-allocations.

In the following patches, this will allow us to easily add another
partition as well as new operations to act on these partitions.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The adjacency group size is part of the match on the adjacency group and
should therefore be exposed using dpipe.

When non-equal-cost multi-path support will be introduced, the group's
size will help users understand the exact number of adjacency entries
each nexthop occupies, as a nexthop will no longer correspond to a
single entry.

The output for a multi-path route with two nexthops, one with weight 255
and the second 1 will be:

Example:

$ devlink dpipe table dump pci/0000:01:00.0 name mlxsw_adj
pci/0000:01:00.0:
  index 0
  match_value:
    type field_exact header mlxsw_meta field adj_index value 65536
    type field_exact header mlxsw_meta field adj_size value 512
    type field_exact header mlxsw_meta field adj_hash_index value 0
  action_value:
    type field_modify header ethernet field destination mac value e4:1d:2d:a5:f3:64
    type field_modify header mlxsw_meta field erif_port mapping ifindex mapping_value 3 value 1

  index 1
  match_value:
    type field_exact header mlxsw_meta field adj_index value 65536
    type field_exact header mlxsw_meta field adj_size value 512
    type field_exact header mlxsw_meta field adj_hash_index value 510
  action_value:
    type field_modify header ethernet field destination mac value e4:1d:2d:a5:f3:65
    type field_modify header mlxsw_meta field erif_port mapping ifindex mapping_value 4 value 2

Thus, the first nexthop occupies 510 adjacency entries and the second 2,
which leads to a ratio of 255 to 1.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no reason why we should limit ourselves to matching only
full IPv4 addresses (/32), the same logic applies between the DATA and
MASK ports, so just make it more configurable to accept both.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no reason why we should limit ourselves to matching only full
IPv4 addresses (/32), the same logic applies between the DATA and MASK
ports, so just make it more configurable to accept both.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inserting IPv6 CFP rules complicates the code a little bit in that we
need to insert two rules side by side and chain them to match a full
IPv6 tuple (src, dst IPv6 + port + protocol).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to do a HW search of the TCAMs which is something slow
and expensive. Since we already maintain a bitmask of active CFP rules,
just iterate over those, starting from bit 1 (after the reserved entry)
to get a count and index position to store the rule later on.

As a result we can remove the code in bcm_sf2_cfp_rule_get() which acted
on the "search" argument, and remove that argument.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for introducing IPv6 rules support, make the
cfp_udf_layout more flexible and match more accurately how the HW is
designed: we have 3 + 1 slices per protocol, but we may not be using all
of them and we are relative to a particular base offset (slice A for
IPv4 for instance). Also populate the slice number that should be used
(slice 1 for IPv4) based on the lookup function.

Finally, we introduce two helper functions: udf_upper_bits() and
udf_lower_bits() to help setting the UDF_n_* valid bits based on the
number of UDFs valid within a slice. Update the IPv4 rule setting to
make use of it to be more robust wrt. change in number of User Defined
Fields being programmed.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the processing of IPv4 rules into specific functions, allowing us
to clearly identify which parts are generic and which ones are not. Also
create a specific function to insert a rule into the action and policer
RAMs as those tend to be fairly generic.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of open coding the shift for the IP protocol, IP fragment bit
etc. define and/or use existing constants to that end.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is the possible reason for different hard to reproduce
problems on my ARMv7-SMP test system.

The symptoms are in recent kernels imprecise external aborts,
and in older kernels various kinds of network stalls and
unexpected page allocation failures.

My testing indicates that the trouble started between v4.5 and v4.6
and prevails up to v4.14.

Using the dirty_tx before acquiring the spin lock is clearly
wrong and was first introduced with v4.6.

Fixes: e3ad57c9 ("stmmac: review RX/TX ring management")
Signed-off-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Timer is properly armed on demand from tun_flow_update(),
so there is no need to arm it at tun init.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If tun_flow_cleanup() deleted all flows, no need to
arm the timer again. It will be armed next time
tun_flow_update() is called.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tun_flow_cleanup() being a timer callback, it is already
running in BH context.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use direct access struct fields rather than PREP_FIELD()
macros to manipulate the jump ID and length, both of which
are exactly 8-bits wide. This simplifies the code somewhat.
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent infinite loop by correctly setting the loop condition to
break when i == 10.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using GMAC4 the valid timestamp is from CTX next desc but
we are passing the previous desc to get_rx_timestamp_status()
callback.

Fix this and while at it rework a little bit the function logic.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When RX HW timestamp is enabled and a frame is discarded we are
not freeing the skb but instead only setting to NULL the entry.

Add a call to dev_kfree_skb_any() so that skb entry is correctly
freed.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need to re-invent memchr_inv() with !is_all_zero(). While at
it, replace conditional and return clauses with a single return
clause in is_tnl_info_zero().
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add functions for managing the lan9303 ALR (Address Logic
Resolution).

Implement DSA methods: port_fdb_add, port_fdb_del, port_mdb_prepare,
port_mdb_add and port_mdb_del.

Since the lan9303 do not offer reading specific ALR entry, the driver
caches all static entries - in a flat table.
Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add DSA method port_fast_age as a step to STP support.

Add low level functions for accessing the lan9303 ALR (Address Logic
Resolution).

Added DSA method port_fdb_dump
Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable syncppp.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable ppp_file.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable asyncppp.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable masces_tx_sa.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable masces_rx_sc.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable masces_rx_sa.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable sixpack.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable fs_node.refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable mlx5_cq.refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable mlx4_srq.refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable mlx4_qp.refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable mlx4_cq.refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable mtk_eth.dma_refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable clip_entry.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NDavid Windsor <dwindsor@gmail.com>
Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spectrum tunnels do not default to ttl of "inherit" like the Linux ones
do. Configure TIGCR on router init so that the TTL of tunnel packets is
copied from the overlay packets.

Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>