Use pr_fmt to prefix kernel output, and remove duplicated msg
of NUMA turned off.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Use pr_fmt to prefix kernel output.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Use of_get_next_parent() instead of open-code.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

numa_init may return error because of numa configuration error. So "No
NUMA configuration found" is inaccurate. In fact, specific configuration
error information should be immediately printed by the testing branch.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This warning has been printed in of_numa_parse_cpu_nodes before.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If the numa-id which was configured in memory@ devicetree node is greater
than MAX_NUMNODES, we should report a warning. We have done this for cpus
and distance-map dt nodes, this patch help them to be consistent.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

For a normal memory@ devicetree node, its reg property can contains more
memory blocks.

Because we don't known how many memory blocks maybe contained, so we try
from index=0, increase 1 until error returned(the end).
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This information will be printed in the subfunction numa_add_memblk.
They are not the same, but very similar.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

In systems with heterogeneous CPUs, there are multiple logical CPU PMUs,
each of which covers a subset of CPUs in the system. In some cases
userspace needs to know which CPUs a given logical PMU covers, so we'd
like to expose a cpumask under sysfs, similar to what is done for uncore
PMUs.

Unfortunately, prior to commit 00e727bb ("perf stat: Balance
opening and reading events"), perf stat only correctly handled a cpumask
holding a single CPU, and only when profiling in system-wide mode. In
other cases, the presence of a cpumask file could cause perf stat to
behave erratically.

Thus, exposing a cpumask file would break older perf binaries in cases
where they would otherwise work.

To avoid this issue while still providing userspace with the information
it needs, this patch exposes a differently-named file (cpus) under
sysfs. New tools can look for this and operate correctly, while older
tools will not be adversely affected by its presence.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Now that the 32-bit and 64-bit perf backends use the common groups
directly, remove the fallback and no longer allow the groups array to be
overridden.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

By using a common attr_groups array, the common arm_pmu code can set up
common files (e.g. cpumask) for us in subsequent patches.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

By using a common attr_groups array, the common arm_pmu code can set up
common files (e.g. cpumask) for us in subsequent patches.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

In preparation for adding common attribute groups, add an array of
attribute group pointers to arm_pmu, which will be used if the
backend hasn't already set pmu::attr_groups.

Subsequent patches will move backends over to using these, before adding
common fields.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When CONFIG_PID_IN_CONTEXTIDR is not selected, we use an empty stub
definition of contextidr_thread_switch(). As everything we rely upon
exists regardless of CONFIG_PID_IN_CONTEXTIDR, we don't strictly require
an empty stub.

By using IS_ENABLED() rather than ifdeffery, we avoid duplication, and
get compiler coverage on all the code even when CONFIG_PID_IN_CONTEXTIDR
is not selected and the code is optimised away.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

A while back we added {read,write}_sysreg accessors to handle accesses
to system registers, without the usual boilerplate asm volatile,
temporary variable, etc.

This patch makes use of these across arm64 to make code shorter and
clearer. For sequences with a trailing ISB, the existing isb() macro is
also used so that asm blocks can be removed entirely.

A few uses of inline assembly for msr/mrs are left as-is. Those
manipulating sp_el0 for the current thread_info value have special
clobber requiremends.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

A while back we added {read,write}_sysreg accessors to handle accesses
to system registers, without the usual boilerplate asm volatile,
temporary variable, etc.

This patch makes use of these in the arm64 KVM code to make the code
shorter and clearer.

At the same time, a comment style violation next to a system register
access is fixed up in reset_pmcr, and comments describing whether
operations are reads or writes are removed as this is now painfully
obvious.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

A while back we added {read,write}_sysreg accessors to handle accesses
to system registers, without the usual boilerplate asm volatile,
temporary variable, etc.

This patch makes use of these in the arm64 DCC accessors to make the
code shorter and clearer.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

A while back we added {read,write}_sysreg accessors to handle accesses
to system registers, without the usual boilerplate asm volatile,
temporary variable, etc.

This patch makes use of these in the arm64 arch timer accessors to make
the code shorter and clearer.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently write_sysreg has to allocate a temporary register to write
zero to a system register, which is unfortunate given that the MSR
instruction accepts XZR as an operand.

Allow XZR to be used when appropriate by fiddling with the assembly
constraints.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When zeroing an I/O location, the current accessors are forced to
allocate a temporary register to store the zero for the write. By
tweaking the assembly constraints, we can allow the compiler to use
the zero register directly in such cases, and save some juggling.
Compiling a representative kernel configuration with GCC 6 shows
that 2.3KB worth of code can be wasted just on that!

  text     data    bss      dec      hex     filename
 13316776 3248256 18176769 34741801 2121e29 vmlinux.o.new
 13319140 3248256 18176769 34744165 2122765 vmlinux.o.old
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch adds static keys transparently for all the cpu_hwcaps
features by implementing an array of default-false static keys and
enabling them when detected. The cpus_have_cap() check uses the static
keys if the feature being checked is a constant, otherwise the compiler
generates the bitmap test.

Because of the early call to static_branch_enable() via
check_local_cpu_errata() -> update_cpu_capabilities(), the jump labels
are initialised in cpuinfo_store_boot_cpu().

Cc: Will Deacon <will.deacon@arm.com>
Cc: Suzuki K. Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The static key API is currently designed around single variable
definitions. There are cases where an array of static keys is desirable,
so extend the API to allow this rather than using the internal static
key implementation directly.

Cc: Jason Baron <jbaron@akamai.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: NDave P Martin <Dave.Martin@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

There is only fixup_init() in mm.h , and it is only called
in free_initmem(), so move the codes from fixup_init() into
free_initmem(), then drop fixup_init() and mm.h.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

As declared by the chief penguin, and enforced by the NO_IRQ brigade,
IRQ0 doesn't exist, and is considered as an error (no irq).

Unfortunately, the arm_pmu driver still considers it as valid in
a large number of cases. Let's fix this.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, enabling stacktrace of a kprobe events generates warning:

  echo stacktrace > /sys/kernel/debug/tracing/trace_options
  echo "p xhci_irq" > /sys/kernel/debug/tracing/kprobe_events
  echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable

save_stack_trace_regs() not implemented yet.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at ../kernel/stacktrace.c:74 save_stack_trace_regs+0x3c/0x48
Modules linked in:

CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc4-dirty #5128
Hardware name: ARM Juno development board (r1) (DT)
task: ffff800975dd1900 task.stack: ffff800975ddc000
PC is at save_stack_trace_regs+0x3c/0x48
LR is at save_stack_trace_regs+0x3c/0x48
pc : [<ffff000008126c64>] lr : [<ffff000008126c64>] pstate: 600003c5
sp : ffff80097ef52c00

Call trace:
   save_stack_trace_regs+0x3c/0x48
   __ftrace_trace_stack+0x168/0x208
   trace_buffer_unlock_commit_regs+0x5c/0x7c
   kprobe_trace_func+0x308/0x3d8
   kprobe_dispatcher+0x58/0x60
   kprobe_breakpoint_handler+0xbc/0x18c
   brk_handler+0x50/0x90
   do_debug_exception+0x50/0xbc

This patch implements save_stack_trace_regs(), so that stacktrace of a
kprobe events can be obtained.

After this patch, there is no warning and we can see the stacktrace for
kprobe events in trace buffer.

more /sys/kernel/debug/tracing/trace
          <idle>-0     [004] d.h.  1356.000496: p_xhci_irq_0:(xhci_irq+0x0/0x9ac)
          <idle>-0     [004] d.h.  1356.000497: <stack trace>
  => xhci_irq
  => __handle_irq_event_percpu
  => handle_irq_event_percpu
  => handle_irq_event
  => handle_fasteoi_irq
  => generic_handle_irq
  => __handle_domain_irq
  => gic_handle_irq
  => el1_irq
  => arch_cpu_idle
  => default_idle_call
  => cpu_startup_entry
  => secondary_start_kernel
  =>
Tested-by: NDavid A. Long <dave.long@linaro.org>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NPratyush Anand <panand@redhat.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit b5fe2429 ("arm64: kernel: fix style issues in sleep.S")
changed the linkage of _cpu_resume() to local, even though the symbol
is also referenced from hibernate.c. So revert this change.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The code that provides /dev/mem uses xlate_dev_mem_{k,}ptr() to
avoid making a cachable mapping of a non-cachable area on ia64.
On arm64 we do this via phys_mem_access_prot() instead, but provide
dummy versions of xlate_dev_mem_{k,}ptr().

These are the same as those in asm-generic/io.h, which we include from
asm/io.h
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Single-step traps to userspace (e.g. via ptrace) are expected to use
the TRAP_TRACE for the si_code field of the siginfo, as opposed to
TRAP_HWBRPT that we report currently.

Fix the reported value, which has no effect on existing and legacy
builds of GDB.
Reported-by: NYao Qi <yao.qi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Now that the only remaining occurrences of the use of callee saved
registers are on the primary boot path, add a comment to the code
which register is used for what.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Instead of stashing the value of the link register in x28 before setting
up the stack and calling into C code, create an ordinary PCS compatible
stack frame so that we can push the return address onto the stack.

Since exception handlers require a stack as well, assign the stack pointer
register before installing the vector table.

Note that this accounts for the difference between THREAD_START_SP and
THREAD_SIZE, given that the stack pointer is always decremented before
calling into any C code.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Keeping __PHYS_OFFSET in x24 is actually less clear than simply taking
the value of __PHYS_OFFSET using an adrp instruction in the three places
that we need it. So change that.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Using x27 for passing to __enable_mmu what is essentially the return
address makes the code look more complicated than it needs to be. So
switch to x30/lr, and update the secondary and cpu_resume call sites to
simply call __enable_mmu as an ordinary function, with a bl instruction.
This requires the callers to be covered by .idmap.text.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The KASLR processing is only used by the primary boot path, and
complements the processing that takes place in __primary_switch().
Move the two parts together, to make the code easier to understand.

Also, fix up a minor whitespace issue.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[will: fixed conflict with -rc3 due to lack of fd363bd4]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The function el2_setup() passes its return value in register w20, and
in the two cases where the caller actually cares about this return value,
it is passed into set_cpu_boot_mode_flag() [almost] directly, which
expects its input in w20 as well.

So there is no reason to use a 'special' callee saved register here, but
we can simply follow the PCS for return value and first argument,
respectively.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This fixes a number of style issues in sleep.S. No functional changes are
intended:
- replace absolute literal references with relative references in
  __cpu_suspend_enter(), which executes from its virtual address
- replace explicit lr assignment plus branch with bl in cpu_resume(), which
  aligns it with stext() and secondary_startup()
- don't export _cpu_resume()
- use adr_l for mpidr_hash reference, and fix the incorrect accompanying
  comment, which has been out of date since commit cabe1c81 ("arm64:
  Change cpu_resume() to enable mmu early then access sleep_sp by va")
- replace leading spaces with tabs, and add a bit of whitespace for
  readability
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit e19a6ee2 ("arm64: kernel: Save and restore UAO and
addr_limit on exception entry") states that exception handler inherits
the original PSTATE.UAO value, so UAO needes to be reset
explicitly. However, ARM 8.2 Extension documentation says:

PSTATE.UAO is copied to SPSR_ELx.UAO and is then set to 0 on an
exception taken from AArch64 to AArch64

so hardware already does the right thing.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The arm64 debug monitor initialisation code uses a CPU hotplug notifier
to clear the OS lock when CPUs come online.

This patch converts the code to the new hotplug mechanism.

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The arm64 hw_breakpoint implementation uses a CPU hotplug notifier to
reset the {break,watch}point registers when CPUs come online.

This patch converts the code to the new hotplug mechanism, whilst moving
the invocation earlier to remove the need to disable IRQs explicitly in
the driver (which could cause havok if we trip a watchpoint in an IRQ
handler whilst restoring the debug register state).

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

remove duplicate macro __KERNEL__ check
Signed-off-by: Nzijun_hu <zijun_hu@htc.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When TIF_SINGLESTEP is set for a task, the single-step state machine is
enabled and we must take care not to reset it to the active-not-pending
state if it is already in the active-pending state.

Unfortunately, that's exactly what user_enable_single_step does, by
unconditionally setting the SS bit in the SPSR for the current task.
This causes failures in the GDB testsuite, where GDB ends up missing
expected step traps if the instruction being stepped generates another
trap, e.g. PTRACE_EVENT_FORK from an SVC instruction.

This patch fixes the problem by preserving the current state of the
stepping state machine when TIF_SINGLESTEP is set on the current thread.

Cc: <stable@vger.kernel.org>
Reported-by: NYao Qi <yao.qi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>