The 802.15.4-2011 standard states that for each key, a list of devices
that use this key shall be kept. Previous patches have only considered
two options:

 * a device "uses" (or may use) all keys, rendering the list useless
 * a device is restricted to a certain set of keys

Another option would be that a device *may* use all keys, but need not
do so, and we are interested in the actual set of keys the device uses.
Recording keys used by any given device may have a noticable performance
impact and might not be needed as often. The common case, in which a
device will not switch keys too often, should still perform well.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds user-visible interfaces for the llsec infrastructure.
For the added methods, the only major difference between all add/remove
implementation lies in how the specific object is parsed, and for dump
requests, how objects are written into netlink messages.

To save on boilerplate code, table dumps are routed through a helper
function that handles netlink dump state, leaving the actual dumping
code to care only about iterating over the table to be dumped and
filling netlink messages. For add/remove methods, the boilerplate
required to work is not quite as large, but still enough to also move
into a local helper.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow datagram sockets to override the security settings of the device
they send from on a per-socket basis. Requires CAP_NET_ADMIN or
CAP_NET_RAW, since raw sockets can send arbitrary packets anyway.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The added structures match 802.15.4-2011 link-layer security PIBs as
closely as is reasonable. Some lists required by the standard were
modeled as bitmaps (frame_types and command_frame_ids in *llsec_key,
802.15.4-2011 7.5/Table 61), since using lists for those seems a bit
excessive and not particularly useful. The DeviceDescriptorHandleList
was inverted and is here a per-device list, since operations on this
list are likely to have both a key and a device at hand, and per-device
lists of keys are shorter than per-key lists of devices.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some Ethernet MACs have a "fixed link", and are not connected to a
normal MDIO-managed PHY device. For those situations, a Device Tree
binding allows to describe a "fixed link" using a special PHY node.

This patch adds:

 * A documentation for the fixed PHY Device Tree binding.

 * An of_phy_is_fixed_link() function that an Ethernet driver can call
   on its PHY phandle to find out whether it's a fixed link PHY or
   not. It should typically be used to know if
   of_phy_register_fixed_link() should be called.

 * An of_phy_register_fixed_link() function that instantiates the
   fixed PHY into the PHY subsystem, so that when the driver calls
   of_phy_connect(), the PHY device associated to the OF node will be
   found.

These two additional functions also support the old fixed-link Device
Tree binding used on PowerPC platforms, so that ultimately, the
network device drivers for those platforms could be converted to use
of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of
of_phy_connect_fixed_link(), while keeping compatibility with their
respective Device Tree bindings.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing fixed_phy_add() function has several drawbacks that
prevents it from being used as is for OF-based declaration of fixed
PHYs:

 * The address of the PHY on the fake bus needs to be passed, while a
   dynamic allocation is desired.

 * Since the phy_device instantiation is post-poned until the next
   mdiobus scan, there is no way to associate the fixed PHY with its
   OF node, which later prevents of_phy_connect() from finding this
   fixed PHY from a given OF node.

To solve this, this commit introduces fixed_phy_register(), which will
allocate an available PHY address, add the PHY using fixed_phy_add()
and instantiate the phy_device structure associated with the provided
OF node.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NGrant Likely <grant.likely@linaro.org>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maps all internal BPF instructions into x86_64 instructions.
This patch replaces original BPF x64 JIT with internal BPF x64 JIT.
sysctl net.core.bpf_jit_enable is reused as on/off switch.

Performance:

1. old BPF JIT and internal BPF JIT generate equivalent x86_64 code.
  No performance difference is observed for filters that were JIT-able before

Example assembler code for BPF filter "tcpdump port 22"

original BPF -> old JIT:            original BPF -> internal BPF -> new JIT:
   0:   push   %rbp                      0:     push   %rbp
   1:   mov    %rsp,%rbp                 1:     mov    %rsp,%rbp
   4:   sub    $0x60,%rsp                4:     sub    $0x228,%rsp
   8:   mov    %rbx,-0x8(%rbp)           b:     mov    %rbx,-0x228(%rbp) // prologue
                                        12:     mov    %r13,-0x220(%rbp)
                                        19:     mov    %r14,-0x218(%rbp)
                                        20:     mov    %r15,-0x210(%rbp)
                                        27:     xor    %eax,%eax         // clear A
   c:   xor    %ebx,%ebx                29:     xor    %r13,%r13         // clear X
   e:   mov    0x68(%rdi),%r9d          2c:     mov    0x68(%rdi),%r9d
  12:   sub    0x6c(%rdi),%r9d          30:     sub    0x6c(%rdi),%r9d
  16:   mov    0xd8(%rdi),%r8           34:     mov    0xd8(%rdi),%r10
                                        3b:     mov    %rdi,%rbx
  1d:   mov    $0xc,%esi                3e:     mov    $0xc,%esi
  22:   callq  0xffffffffe1021e15       43:     callq  0xffffffffe102bd75
  27:   cmp    $0x86dd,%eax             48:     cmp    $0x86dd,%rax
  2c:   jne    0x0000000000000069       4f:     jne    0x000000000000009a
  2e:   mov    $0x14,%esi               51:     mov    $0x14,%esi
  33:   callq  0xffffffffe1021e31       56:     callq  0xffffffffe102bd91
  38:   cmp    $0x84,%eax               5b:     cmp    $0x84,%rax
  3d:   je     0x0000000000000049       62:     je     0x0000000000000074
  3f:   cmp    $0x6,%eax                64:     cmp    $0x6,%rax
  42:   je     0x0000000000000049       68:     je     0x0000000000000074
  44:   cmp    $0x11,%eax               6a:     cmp    $0x11,%rax
  47:   jne    0x00000000000000c6       6e:     jne    0x0000000000000117
  49:   mov    $0x36,%esi               74:     mov    $0x36,%esi
  4e:   callq  0xffffffffe1021e15       79:     callq  0xffffffffe102bd75
  53:   cmp    $0x16,%eax               7e:     cmp    $0x16,%rax
  56:   je     0x00000000000000bf       82:     je     0x0000000000000110
  58:   mov    $0x38,%esi               88:     mov    $0x38,%esi
  5d:   callq  0xffffffffe1021e15       8d:     callq  0xffffffffe102bd75
  62:   cmp    $0x16,%eax               92:     cmp    $0x16,%rax
  65:   je     0x00000000000000bf       96:     je     0x0000000000000110
  67:   jmp    0x00000000000000c6       98:     jmp    0x0000000000000117
  69:   cmp    $0x800,%eax              9a:     cmp    $0x800,%rax
  6e:   jne    0x00000000000000c6       a1:     jne    0x0000000000000117
  70:   mov    $0x17,%esi               a3:     mov    $0x17,%esi
  75:   callq  0xffffffffe1021e31       a8:     callq  0xffffffffe102bd91
  7a:   cmp    $0x84,%eax               ad:     cmp    $0x84,%rax
  7f:   je     0x000000000000008b       b4:     je     0x00000000000000c2
  81:   cmp    $0x6,%eax                b6:     cmp    $0x6,%rax
  84:   je     0x000000000000008b       ba:     je     0x00000000000000c2
  86:   cmp    $0x11,%eax               bc:     cmp    $0x11,%rax
  89:   jne    0x00000000000000c6       c0:     jne    0x0000000000000117
  8b:   mov    $0x14,%esi               c2:     mov    $0x14,%esi
  90:   callq  0xffffffffe1021e15       c7:     callq  0xffffffffe102bd75
  95:   test   $0x1fff,%ax              cc:     test   $0x1fff,%rax
  99:   jne    0x00000000000000c6       d3:     jne    0x0000000000000117
                                        d5:     mov    %rax,%r14
  9b:   mov    $0xe,%esi                d8:     mov    $0xe,%esi
  a0:   callq  0xffffffffe1021e44       dd:     callq  0xffffffffe102bd91 // MSH
                                        e2:     and    $0xf,%eax
                                        e5:     shl    $0x2,%eax
                                        e8:     mov    %rax,%r13
                                        eb:     mov    %r14,%rax
                                        ee:     mov    %r13,%rsi
  a5:   lea    0xe(%rbx),%esi           f1:     add    $0xe,%esi
  a8:   callq  0xffffffffe1021e0d       f4:     callq  0xffffffffe102bd6d
  ad:   cmp    $0x16,%eax               f9:     cmp    $0x16,%rax
  b0:   je     0x00000000000000bf       fd:     je     0x0000000000000110
                                        ff:     mov    %r13,%rsi
  b2:   lea    0x10(%rbx),%esi         102:     add    $0x10,%esi
  b5:   callq  0xffffffffe1021e0d      105:     callq  0xffffffffe102bd6d
  ba:   cmp    $0x16,%eax              10a:     cmp    $0x16,%rax
  bd:   jne    0x00000000000000c6      10e:     jne    0x0000000000000117
  bf:   mov    $0xffff,%eax            110:     mov    $0xffff,%eax
  c4:   jmp    0x00000000000000c8      115:     jmp    0x000000000000011c
  c6:   xor    %eax,%eax               117:     mov    $0x0,%eax
  c8:   mov    -0x8(%rbp),%rbx         11c:     mov    -0x228(%rbp),%rbx // epilogue
  cc:   leaveq                         123:     mov    -0x220(%rbp),%r13
  cd:   retq                           12a:     mov    -0x218(%rbp),%r14
                                       131:     mov    -0x210(%rbp),%r15
                                       138:     leaveq
                                       139:     retq

On fully cached SKBs both JITed functions take 12 nsec to execute.
BPF interpreter executes the program in 30 nsec.

The difference in generated assembler is due to the following:

Old BPF imlements LDX_MSH instruction via sk_load_byte_msh() helper function
inside bpf_jit.S.
New JIT removes the helper and does it explicitly, so ldx_msh cost
is the same for both JITs, but generated code looks longer.

New JIT has 4 registers to save, so prologue/epilogue are larger,
but the cost is within noise on x64.

Old JIT checks whether first insn clears A and if not emits 'xor %eax,%eax'.
New JIT clears %rax unconditionally.

2. old BPF JIT doesn't support ANC_NLATTR, ANC_PAY_OFFSET, ANC_RANDOM
  extensions. New JIT supports all BPF extensions.
  Performance of such filters improves 2-4 times depending on a filter.
  The longer the filter the higher performance gain.
  Synthetic benchmarks with many ancillary loads see 20x speedup
  which seems to be the maximum gain from JIT

Notes:

. net.core.bpf_jit_enable=2 + tools/net/bpf_jit_disasm is still functional
  and can be used to see generated assembler

. there are two jit_compile() functions and code flow for classic filters is:
  sk_attach_filter() - load classic BPF
  bpf_jit_compile() - try to JIT from classic BPF
  sk_convert_filter() - convert classic to internal
  bpf_int_jit_compile() - JIT from internal BPF

  seccomp and tracing filters will just call bpf_int_jit_compile()
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current mac_cb handling of ieee802154 is rather awkward and limited.
Decompose the single flags field into multiple fields with the meanings
of each subfield of the flags field to make future extensions (for
example, link-layer security) easier. Also don't set the frame sequence
number in upper layers, since that's a thing the MAC is supposed to set
on frame transmit - we set it on header creation, but assuming that
upper layers do not blindly duplicate our headers, this is fine.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dealing with 802.15.4, one often has to know the maximum payload
size for a given packet. This depends on many factors, one of which is
whether or not a security header is present in the frame. These
definitions and functions provide an easy way for any upper layer to
calculate the maximum payload size for a packet. The first obvious user
for this is 6lowpan, which duplicates this calculation and gets it
partially wrong because it ignores security headers.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

> include/net/ip.h:211:5: warning: "CONFIG_SYSCTL" is not defined [-Wundef]
>  #if CONFIG_SYSCTL
>      ^
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing a colon on definition use is a bit odd so
change the macro for the 32 bit case to declare an
__attribute__((unused)) and __deprecated variable.

The __deprecated attribute will cause gcc to emit
an error if the variable is actually used.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During heavy traffic, napi is constatntly polling the complition queue
and no interrupt is fired. Because of that, changes to irq affinity are
ignored until traffic is stopped and resumed.

By registering to the irq notifier mechanism, and forcing interrupt when
affinity is changed, irq affinity changes will be immediatly enforced.
Signed-off-by: NYuval Atias <yuvala@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_local_port_range is already per netns, so should ip_local_reserved_ports
be. And since it is none by default we don't actually need it when we don't
enable CONFIG_SYSCTL.

By the way, rename inet_is_reserved_local_port() to inet_is_local_reserved_port()

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using mark-based routing, sockets returned from accept()
may need to be marked differently depending on the incoming
connection request.

This is the case, for example, if different socket marks identify
different networks: a listening socket may want to accept
connections from all networks, but each connection should be
marked with the network that the request came in on, so that
subsequent packets are sent on the correct network.

This patch adds a sysctl to mark TCP sockets based on the fwmark
of the incoming SYN packet. If enabled, and an unmarked socket
receives a SYN, then the SYN packet's fwmark is written to the
connection's inet_request_sock, and later written back to the
accepted socket when the connection is established.  If the
socket already has a nonzero mark, then the behaviour is the same
as it is today, i.e., the listening socket's fwmark is used.

Black-box tested using user-mode linux:

- IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the
  mark of the incoming SYN packet.
- The socket returned by accept() is marked with the mark of the
  incoming SYN packet.
- Tested with syncookies=1 and syncookies=2.
Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kernel-originated IP packets that have no user socket associated
with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.)
are emitted with a mark of zero. Add a sysctl to make them have
the same mark as the packet they are replying to.

This allows an administrator that wishes to do so to use
mark-based routing, firewalling, etc. for these replies by
marking the original packets inbound.

Tested using user-mode linux:
 - ICMP/ICMPv6 echo replies and errors.
 - TCP RST packets (IPv4 and IPv6).
Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To avoid large code duplication in IPv6, we need to first simplify
the complicate SYN-ACK sending code in tcp_v4_conn_request().

To use tcp_v4(6)_send_synack() to send all SYN-ACKs, we need to
initialize the mini socket's receive window before trying to
create the child socket and/or building the SYN-ACK packet. So we move
that initialization from tcp_make_synack() to tcp_v4_conn_request()
as a new function tcp_openreq_init_req_rwin().

After this refactoring the SYN-ACK sending code is simpler and easier
to implement Fast Open for IPv6.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDaniel Lee <longinus00@gmail.com>
Signed-off-by: NJerry Chu <hkchu@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consolidate various cookie checking and generation code to simplify
the fast open processing. The main goal is to reduce code duplication
in tcp_v4_conn_request() for IPv6 support.

Removes two experimental sysctl flags TFO_SERVER_ALWAYS and
TFO_SERVER_COOKIE_NOT_CHKD used primarily for developmental debugging
purposes.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDaniel Lee <longinus00@gmail.com>
Signed-off-by: NJerry Chu <hkchu@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move common TFO functions that will be used by both v4 and v6
to tcp_fastopen.c. Create a helper tcp_fastopen_queue_check().
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDaniel Lee <longinus00@gmail.com>
Signed-off-by: NJerry Chu <hkchu@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The NCM class match in the cdc_mbim driver is confusing and
cause unexpected behaviour. The USB core guarantees that a
USB interface is in altsetting 0 when probing starts. This
means that devices implementing a NCM 1.0 backwards
compatible MBIM function (a "NCM/MBIM function") always hit
the NCM entry in the cdc_mbim driver match table. Such
functions will never match any of the MBIM entries.

This causes unexpeced behaviour for cases where the NCM and
MBIM entries are differet, which is currently the case for
all except Ericsson devices.

Improve the probing of NCM/MBIM functions by looking up the
device again in the cdc_mbim match table after switching to
the MBIM identity.

The shared altsetting selection is updated to better
accommodate the new probing logic, returning the preferred
altsetting for the control interface instead of the data
interface. The control interface altsetting update is moved
to the cdc_mbim driver. It is never necessary to change the
control interface altsetting for NCM.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Reported by: Yu-an Shih <yshih@nvidia.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net: get rid of SET_ETHTOOL_OPS

Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.

Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
-       SET_ETHTOOL_OPS(dev, ops);
+       dev->ethtool_ops = ops;

Compile tested only, but I'd seriously wonder if this broke anything.
Suggested-by: NDave Miller <davem@davemloft.net>
Signed-off-by: NWilfried Klaebe <w-lkml@lebenslange-mailadresse.de>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The __vlan_find_dev_deep should always called in RCU, according
David's suggestion, rename to __vlan_find_dev_deep_rcu looks more
reasonable.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by several people, rename local_df to ignore_df,
since it means "ignore df bit if it is set".

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce BPF helper macros to define instructions
(similar to old BPF_STMT/BPF_JUMP macros)

Use them while converting classic BPF to internal
and in BPF testsuite later.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly, when CONFIG_SYSCTL is not set, ping_group_range should still
work, just that no one can change it. Therefore we should move it out of
sysctl_net_ipv4.c. And, it should not share the same seqlock with
ip_local_port_range.

BTW, rename it to ->ping_group_range instead.

Cc: David S. Miller <davem@davemloft.net>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: NStefan de Konink <stefan@konink.de>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_SYSCTL is not set, ip_local_port_range should still work,
just that no one can change it. Therefore we should move it out of sysctl_inet.c.
Also, rename it to ->ip_local_ports instead.

Cc: David S. Miller <davem@davemloft.net>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: NStefan de Konink <stefan@konink.de>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If CONFIG_OF is not set, make of_mdiobus_register() call
mdiobus_register() instead of returning -ENOSYS.

This way, we can just call of_mdiobus_register() from all DT-enabled
drivers to handle the compat cases.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Suggested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 8f0ea0fe (snmp: reduce percpu needs by 50%)
reduced snmp array size to 1, so technically it doesn't have to be
an array any more. What's more, after the following commit:

	commit 933393f5
	Date:   Thu Dec 22 11:58:51 2011 -0600

	    percpu: Remove irqsafe_cpu_xxx variants

	    We simply say that regular this_cpu use must be safe regardless of
	    preemption and interrupt state.  That has no material change for x86
	    and s390 implementations of this_cpu operations.  However, arches that
	    do not provide their own implementation for this_cpu operations will
	    now get code generated that disables interrupts instead of preemption.

probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after
almost 3 years, no one complains.

So, just convert the array to a single pointer and remove snmp_mib_init()
and snmp_mib_free() as well.

Cc: Christoph Lameter <cl@linux.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit d2069403,
there are no more callers.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The quoted text and figure are from RFC 6040 ("Tunnelling of Explicit
Congestion Notification").
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call skb_checksum_init instead of private functions.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call skb_checksum_init instead of private functions.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create a general __skb_checksum_validate function (actually a
macro) to subsume the various checksum_init functions. This
function can either init the checksum, or do the full validation
(logically checksum_init+skb_check_complete)-- a flag specifies
if full vaidation is performed. Also, there is a flag to the function
to indicate that zero checksums are allowed (to support optional
UDP checksums).

Added several stub functions for calling __skb_checksum_validate.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

csum_add is really nothing more then add-with-carry which
can be implemented efficiently in some architectures.
Allow architecture to define this protected by HAVE_ARCH_CSUM_ADD.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Right now the core vsock module is the owner of the proto family. This
means there's nothing preventing the transport module from unloading if
there are open sockets, which results in a panic. Fix that by allowing
the transport to be the owner, which will refcount it properly.

Includes version bump to 1.0.1.0-k

Passes checkpatch this time, I swear...
Acked-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NAndy King <acking@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add locked-version for cfg80211_sched_scan_stopped.
This is used for some users that might want to
call it when rtnl is already locked.

Fixes: d43c6b6e ("mac80211: reschedule sched scan after HW restart")
Cc: stable@vger.kernel.org (3.14+)
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current code is a bit hard to parse on which registers can be used,
how they are mapped and all play together. It makes much more sense to
define this a bit more clearly so that the code is a bit more intuitive.
This patch cleans this up, and makes naming a bit more consistent among
the code. This also allows for moving some of the defines into the header
file. Clearing of A and X registers in __sk_run_filter() do not get a
particular register name assigned as they have not an 'official' function,
but rather just result from the concrete initial mapping of old BPF
programs. Since for BPF helper functions for BPF_CALL we already use
small letters, so be consistent here as well. No functional changes.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch simplifies label naming for the BPF jump-table.
When we define labels via DL(), we just concatenate/textify
the combination of instruction opcode which consists of the
class, subclass, word size, target register and so on. Each
time we leave BPF_ prefix intact, so that e.g. the preprocessor
generates a label BPF_ALU_BPF_ADD_BPF_X for DL(BPF_ALU, BPF_ADD,
BPF_X) whereas a label name of ALU_ADD_X is much more easy
to grasp. Pure cleanup only.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e114a710 ("tcp: fix cwnd limited checking to improve
congestion control") obsoleted in_flight parameter from
tcp_is_cwnd_limited() and its callers.

This patch does the removal as promised.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>