1. 28 9月, 2009 1 次提交
  2. 01 4月, 2009 1 次提交
    • N
      mm: page_mkwrite change prototype to match fault · c2ec175c
      Nick Piggin 提交于
      Change the page_mkwrite prototype to take a struct vm_fault, and return
      VM_FAULT_xxx flags.  There should be no functional change.
      
      This makes it possible to return much more detailed error information to
      the VM (and also can provide more information eg.  virtual_address to the
      driver, which might be important in some special cases).
      
      This is required for a subsequent fix.  And will also make it easier to
      merge page_mkwrite() with fault() in future.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Cc: Chris Mason <chris.mason@oracle.com>
      Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
      Cc: Miklos Szeredi <miklos@szeredi.hu>
      Cc: Steven Whitehouse <swhiteho@redhat.com>
      Cc: Mark Fasheh <mfasheh@suse.com>
      Cc: Joel Becker <joel.becker@oracle.com>
      Cc: Artem Bityutskiy <dedekind@infradead.org>
      Cc: Felix Blyakher <felixb@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c2ec175c
  3. 11 11月, 2008 1 次提交
    • T
      ocfs2: return 0 in page_mkwrite to let VFS retry. · 4c1bbf1b
      Tao Ma 提交于
      In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping
      isn't updated, and it will cause the user space program get SIGBUS and
      exit. The reason is that during race writeable mmap, we will do
      unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is
      that if we reuturn 0 in page_mkwrite, VFS will retry fault and then
      call page_mkwrite again, so it is safe to return 0 here.
      Signed-off-by: NTao Ma <tao.ma@oracle.com>
      Signed-off-by: NMark Fasheh <mfasheh@suse.com>
      4c1bbf1b
  4. 26 1月, 2008 2 次提交
    • M
      ocfs2: Rename ocfs2_meta_[un]lock · e63aecb6
      Mark Fasheh 提交于
      Call this the "inode_lock" now, since it covers both data and meta data.
      This patch makes no functional changes.
      Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
      e63aecb6
    • M
      ocfs2: Remove data locks · c934a92d
      Mark Fasheh 提交于
      The meta lock now covers both meta data and data, so this just removes the
      now-redundant data lock.
      
      Combining locks saves us a round of lock mastery per inode and one less lock
      to ping between nodes during read/write.
      
      We don't lose much - since meta locks were always held before a data lock
      (and at the same level) ordered writeout mode (the default) ensured that
      flushing for the meta data lock also pushed out data anyways.
      Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
      c934a92d
  5. 20 7月, 2007 4 次提交
    • N
      fix some conversion overflows · 18336338
      Nick Piggin 提交于
      Fix page index to offset conversion overflows in buffer layer, ecryptfs,
      and ocfs2.
      
      It would be nice to convert the whole tree to page_offset, but for now
      just fix the bugs.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Cc: Michael Halcrow <mhalcrow@us.ibm.com>
      Cc: Mark Fasheh <mark.fasheh@oracle.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      18336338
    • N
      mm: fault feedback #1 · d0217ac0
      Nick Piggin 提交于
      Change ->fault prototype.  We now return an int, which contains
      VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
       FAULT_RET_ code tells the VM whether a page was found, whether it has been
      locked, and potentially other things.  This is not quite the way he wanted
      it yet, but that's changed in the next patch (which requires changes to
      arch code).
      
      This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
      that a page is locked which requires filemap_nopage to go away (because we
      can no longer remain backward compatible without that flag), but we were
      going to do that anyway.
      
      struct fault_data is renamed to struct vm_fault as Linus asked. address
      is now a void __user * that we should firmly encourage drivers not to use
      without really good reason.
      
      The page is now returned via a page pointer in the vm_fault struct.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d0217ac0
    • N
      mm: merge populate and nopage into fault (fixes nonlinear) · 54cb8821
      Nick Piggin 提交于
      Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
      the virtual address -> file offset differently from linear mappings.
      
      ->populate is a layering violation because the filesystem/pagecache code
      should need to know anything about the virtual memory mapping.  The hitch here
      is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
       But it is more logical to pass pgoff rather than have the ->nopage function
      calculate it itself anyway (because that's a similar layering violation).
      
      Having the populate handler install the pte itself is likewise a nasty thing
      to be doing.
      
      This patch introduces a new fault handler that replaces ->nopage and
      ->populate and (later) ->nopfn.  Most of the old mechanism is still in place
      so there is a lot of duplication and nice cleanups that can be removed if
      everyone switches over.
      
      The rationale for doing this in the first place is that nonlinear mappings are
      subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
      to duplicate the synchronisation logic rather than just consolidate the two.
      
      After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
      pagecache.  Seems like a fringe functionality anyway.
      
      NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
      users have hit mainline yet.
      
      [akpm@linux-foundation.org: cleanup]
      [randy.dunlap@oracle.com: doc. fixes for readahead]
      [akpm@linux-foundation.org: build fix]
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
      Cc: Mark Fasheh <mark.fasheh@oracle.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      54cb8821
    • N
      mm: fix fault vs invalidate race for linear mappings · d00806b1
      Nick Piggin 提交于
      Fix the race between invalidate_inode_pages and do_no_page.
      
      Andrea Arcangeli identified a subtle race between invalidation of pages from
      pagecache with userspace mappings, and do_no_page.
      
      The issue is that invalidation has to shoot down all mappings to the page,
      before it can be discarded from the pagecache.  Between shooting down ptes to
      a particular page, and actually dropping the struct page from the pagecache,
      do_no_page from any process might fault on that page and establish a new
      mapping to the page just before it gets discarded from the pagecache.
      
      The most common case where such invalidation is used is in file truncation.
      This case was catered for by doing a sort of open-coded seqlock between the
      file's i_size, and its truncate_count.
      
      Truncation will decrease i_size, then increment truncate_count before
      unmapping userspace pages; do_no_page will read truncate_count, then find the
      page if it is within i_size, and then check truncate_count under the page
      table lock and back out and retry if it had subsequently been changed (ptl
      will serialise against unmapping, and ensure a potentially updated
      truncate_count is actually visible).
      
      Complexity and documentation issues aside, the locking protocol fails in the
      case where we would like to invalidate pagecache inside i_size.  do_no_page
      can come in anytime and filemap_nopage is not aware of the invalidation in
      progress (as it is when it is outside i_size).  The end result is that
      dangling (->mapping == NULL) pages that appear to be from a particular file
      may be mapped into userspace with nonsense data.  Valid mappings to the same
      place will see a different page.
      
      Andrea implemented two working fixes, one using a real seqlock, another using
      a page->flags bit.  He also proposed using the page lock in do_no_page, but
      that was initially considered too heavyweight.  However, it is not a global or
      per-file lock, and the page cacheline is modified in do_no_page to increment
      _count and _mapcount anyway, so a further modification should not be a large
      performance hit.  Scalability is not an issue.
      
      This patch implements this latter approach.  ->nopage implementations return
      with the page locked if it is possible for their underlying file to be
      invalidated (in that case, they must set a special vm_flags bit to indicate
      so).  do_no_page only unlocks the page after setting up the mapping
      completely.  invalidation is excluded because it holds the page lock during
      invalidation of each page (and ensures that the page is not mapped while
      holding the lock).
      
      This also allows significant simplifications in do_no_page, because we have
      the page locked in the right place in the pagecache from the start.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d00806b1
  6. 11 7月, 2007 1 次提交
  7. 27 4月, 2007 1 次提交
  8. 08 12月, 2006 1 次提交
  9. 02 12月, 2006 1 次提交
  10. 30 6月, 2006 1 次提交
  11. 11 1月, 2006 1 次提交
  12. 04 1月, 2006 1 次提交