- 09 1月, 2013 1 次提交
-
-
由 Cong Wang 提交于
A regression is introduced by the following commit: commit 4d52cfbe Author: Eric Dumazet <eric.dumazet@gmail.com> Date: Tue Jun 2 00:42:16 2009 -0700 net: ipv4/ip_sockglue.c cleanups Pure cleanups but it is not a pure cleanup... - if (val != -1 && (val < 1 || val>255)) + if (val != -1 && (val < 0 || val > 255)) Since there is no reason provided to allow ttl=0, change it back. Reported-by: Nnitin padalia <padalia.nitin@gmail.com> Cc: nitin padalia <padalia.nitin@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow creating raw sockets. Allow the SIOCSARP ioctl to control the arp cache. Allow the SIOCSIFFLAG ioctl to allow setting network device flags. Allow the SIOCSIFADDR ioctl to allow setting a netdevice ipv4 address. Allow the SIOCSIFBRDADDR ioctl to allow setting a netdevice ipv4 broadcast address. Allow the SIOCSIFDSTADDR ioctl to allow setting a netdevice ipv4 destination address. Allow the SIOCSIFNETMASK ioctl to allow setting a netdevice ipv4 netmask. Allow the SIOCADDRT and SIOCDELRT ioctls to allow adding and deleting ipv4 routes. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting gre tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipip tunnels. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls for adding, changing and deleting ipsec virtual tunnel interfaces. Allow setting the MRT_INIT, MRT_DONE, MRT_ADD_VIF, MRT_DEL_VIF, MRT_ADD_MFC, MRT_DEL_MFC, MRT_ASSERT, MRT_PIM, MRT_TABLE socket options on multicast routing sockets. Allow setting and receiving IPOPT_CIPSO, IP_OPT_SEC, IP_OPT_SID and arbitrary ip options. Allow setting IP_SEC_POLICY/IP_XFRM_POLICY ipv4 socket option. Allow setting the IP_TRANSPARENT ipv4 socket option. Allow setting the TCP_REPAIR socket option. Allow setting the TCP_CONGESTION socket option. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2012 1 次提交
-
-
由 Xi Wang 提交于
(1<<optname) is undefined behavior in C with a negative optname or optname larger than 31. In those cases the result of the shift is not necessarily zero (e.g., on x86). This patch simplifies the code with a switch statement on optname. It also allows the compiler to generate better code (e.g., using a 64-bit mask). Signed-off-by: NXi Wang <xi.wang@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Use inet_iif() consistently, and for TCP record the input interface of cached RX dst in inet sock. rt->rt_iif is going to be encoded differently, so that we can legitimately cache input routes in the FIB info more aggressively. When the input interface is "use SKB device index" the rt->rt_iif will be set to zero. This forces us to move the TCP RX dst cache installation into the ipv4 specific code, and as well it should since doing the route caching for ipv6 is pointless at the moment since it is not inspected in the ipv6 input paths yet. Also, remove the unlikely on dst->obsolete, all ipv4 dsts have obsolete set to a non-zero value to force invocation of the check callback. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2012 1 次提交
-
-
由 David S. Miller 提交于
The specific destination is the host we direct unicast replies to. Usually this is the original packet source address, but if we are responding to a multicast or broadcast packet we have to use something different. Specifically we must use the source address we would use if we were to send a packet to the unicast source of the original packet. The routing cache precomputes this value, but we want to remove that precomputation because it creates a hard dependency on the expensive rpfilter source address validation which we'd like to make cheaper. There are only three places where this matters: 1) ICMP replies. 2) pktinfo CMSG 3) IP options Now there will be no real users of rt->rt_spec_dst and we can simply remove it altogether. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2012 1 次提交
-
-
由 Jiri Pirko 提交于
Until now, struct mreq has not been recognized and it was worked with as with struct in_addr. That means imr_multiaddr was copied to imr_address. So do recognize struct mreq here and copy that correctly. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Baluta 提交于
Fix checkpatch errors of the following type: * ERROR: "foo * bar" should be "foo *bar" * ERROR: "(foo*)" should be "(foo *)" Signed-off-by: NDaniel Baluta <dbaluta@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 2月, 2012 1 次提交
-
-
由 Paul E. McKenney 提交于
The call_rcu() in do_ip_setsockopt() invokes opt_kfree_rcu(), which just calls kfree(). So convert the call_rcu() to kfree_rcu(), which allows opt_kfree_rcu() to be eliminated. Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org
-
- 13 2月, 2012 1 次提交
-
-
由 Jiri Benc 提交于
Currently, it is not easily possible to get TOS/DSCP value of packets from an incoming TCP stream. The mechanism is there, IP_PKTOPTIONS getsockopt with IP_RECVTOS set, the same way as incoming TTL can be queried. This is not actually implemented for TOS, though. This patch adds this functionality, both for IPv4 (IP_PKTOPTIONS) and IPv6 (IPV6_2292PKTOPTIONS). For IPv4, like in the IP_RECVTTL case, the value of the TOS field is stored from the other party's ACK. This is needed for proxies which require DSCP transparency. One such example is at http://zph.bratcheda.org/. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2012 1 次提交
-
-
由 Erich E. Hoover 提交于
The IP_UNICAST_IF feature is needed by the Wine project. This patch implements the feature by setting the outgoing interface in a similar fashion to that of IP_MULTICAST_IF. A separate option is needed to handle this feature since the existing options do not provide all of the characteristics required by IP_UNICAST_IF, a summary is provided below. SO_BINDTODEVICE: * SO_BINDTODEVICE requires administrative privileges, IP_UNICAST_IF does not. From reading some old mailing list articles my understanding is that SO_BINDTODEVICE requires administrative privileges because it can override the administrator's routing settings. * The SO_BINDTODEVICE option restricts both outbound and inbound traffic, IP_UNICAST_IF only impacts outbound traffic. IP_PKTINFO: * Since IP_PKTINFO and IP_UNICAST_IF are independent options, implementing IP_UNICAST_IF with IP_PKTINFO will likely break some applications. * Implementing IP_UNICAST_IF on top of IP_PKTINFO significantly complicates the Wine codebase and reduces the socket performance (doing this requires a lot of extra communication between the "server" and "user" layers). bind(): * bind() does not work on broadcast packets, IP_UNICAST_IF is specifically intended to work with broadcast packets. * Like SO_BINDTODEVICE, bind() restricts both outbound and inbound traffic. Signed-off-by: NErich E. Hoover <ehoover@mines.edu> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Le lundi 07 novembre 2011 à 15:33 +0100, Eric Dumazet a écrit : > At least, in recent kernels we dont change dst->refcnt in forwarding > patch (usinf NOREF skb->dst) > > One particular point is the atomic_inc(dst->refcnt) we have to perform > when queuing an UDP packet if socket asked PKTINFO stuff (for example a > typical DNS server has to setup this option) > > I have one patch somewhere that stores the information in skb->cb[] and > avoid the atomic_{inc|dec}(dst->refcnt). > OK I found it, I did some extra tests and believe its ready. [PATCH net-next] ipv4: IP_PKTINFO doesnt need dst reference When a socket uses IP_PKTINFO notifications, we currently force a dst reference for each received skb. Reader has to access dst to get needed information (rt_iif & rt_spec_dst) and must release dst reference. We also forced a dst reference if skb was put in socket backlog, even without IP_PKTINFO handling. This happens under stress/load. We can instead store the needed information in skb->cb[], so that only softirq handler really access dst, improving cache hit ratios. This removes two atomic operations per packet, and false sharing as well. On a benchmark using a mono threaded receiver (doing only recvmsg() calls), I can reach 720.000 pps instead of 570.000 pps. IP_PKTINFO is typically used by DNS servers, and any multihomed aware UDP application. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 10月, 2011 1 次提交
-
-
由 Maciej Żenczykowski 提交于
Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2011 1 次提交
-
-
由 Maciej Żenczykowski 提交于
Up till now the IP{,V6}_TRANSPARENT socket options (which actually set the same bit in the socket struct) have required CAP_NET_ADMIN privileges to set or clear the option. - we make clearing the bit not require any privileges. - we allow CAP_NET_ADMIN to set the bit (as before this change) - we allow CAP_NET_RAW to set this bit, because raw sockets already pretty much effectively allow you to emulate socket transparency. Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2011 1 次提交
-
-
由 Daniel Baluta 提交于
IP_PKTOPTIONS is broken for 32-bit applications running in COMPAT mode on 64-bit kernels. This happens because msghdr's msg_flags field is always set to zero. When running in COMPAT mode this should be set to MSG_CMSG_COMPAT instead. Signed-off-by: NTiberiu Szocs-Mihai <tszocs@ixiacom.com> Signed-off-by: NDaniel Baluta <dbaluta@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
We lack proper synchronization to manipulate inet->opt ip_options Problem is ip_make_skb() calls ip_setup_cork() and ip_setup_cork() possibly makes a copy of ipc->opt (struct ip_options), without any protection against another thread manipulating inet->opt. Another thread can change inet->opt pointer and free old one under us. Use RCU to protect inet->opt (changed to inet->inet_opt). Instead of handling atomic refcounts, just copy ip_options when necessary, to avoid cache line dirtying. We cant insert an rcu_head in struct ip_options since its included in skb->cb[], so this patch is large because I had to introduce a new ip_options_rcu structure. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 10月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Add __rcu annotations to : (struct ip_ra_chain)->next struct ip_ra_chain *ip_ra_chain; And use appropriate rcu primitives. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 9月, 2010 1 次提交
-
-
由 Michael Kerrisk 提交于
While integrating your man-pages patch for IP_NODEFRAG, I noticed that this option is settable by setsockopt(), but not gettable by getsockopt(). I suppose this is not intended. The (untested, trivial) patch below adds getsockopt() support. Signed-off-by: NMichael kerrisk <mtk.manpages@gmail.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2010 1 次提交
-
-
由 Jiri Olsa 提交于
this patch is implementing IP_NODEFRAG option for IPv4 socket. The reason is, there's no other way to send out the packet with user customized header of the reassembly part. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
commit 66018506 (ip: Router Alert RCU conversion) introduced RCU lookups to ip_call_ra_chain(). It missed proper deinit phase : When ip_ra_control() deletes an ip_ra_chain, it should make sure ip_call_ra_chain() users can not start to use socket during the rcu grace period. It should also delay the sock_put() after the grace period, or we risk a premature socket freeing and corruptions, as raw sockets are not rcu protected yet. This delay avoids using expensive atomic_inc_not_zero() in ip_call_ra_chain(). Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Straightforward conversion to RCU. One rwlock becomes a spinlock, and is static. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
When queueing a skb to socket, we can immediately release its dst if target socket do not use IP_CMSG_PKTINFO. tcp_data_queue() can drop dst too. This to benefit from a hot cache line and avoid the receiver, possibly on another cpu, to dirty this cache line himself. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2010 1 次提交
-
-
由 Hagen Paul Pfeifer 提交于
The check if error signaling is wanted (inet->recverr != 0) is done by the caller: raw.c:raw_err() and udp.c:__udp4_lib_err(), so there is no need to check this condition again. Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 12 1月, 2010 1 次提交
-
-
由 Stephen Hemminger 提交于
This patch adds the kernel portions needed to implement RFC 5082 Generalized TTL Security Mechanism (GTSM). It is a lightweight security measure against forged packets causing DoS attacks (for BGP). This is already implemented the same way in BSD kernels. For the necessary Quagga patch http://www.gossamer-threads.com/lists/quagga/dev/17389 Description from Cisco http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_btsh.html It does add one byte to each socket structure, but I did a little rearrangement to reuse a hole (on 64 bit), but it does grow the structure on 32 bit This should be documented on ip(4) man page and the Glibc in.h file also needs update. IPV6_MINHOPLIMIT should also be added (although BSD doesn't support that). Only TCP is supported, but could also be added to UDP, DCCP, SCTP if desired. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2009 1 次提交
-
-
由 roel kluin 提交于
optlen is unsigned so the `< 0' test is never true. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2009 2 次提交
-
-
由 John Dykstra 提交于
Use symbols instead of magic constants while checking PMTU discovery setsockopt. Remove redundant test in ip_rt_frag_needed() (done by caller). Signed-off-by: NJohn Dykstra <john.dykstra1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ipv4/ipv6 setsockopt(IP_MULTICAST_IF) have dubious __dev_get_by_index() calls. This function should be called only with RTNL or dev_base_lock held, or reader could see a corrupt hash chain and eventually enter an endless loop. Fix is to call dev_get_by_index()/dev_put(). If this happens to be performance critical, we could define a new dev_exist_by_index() function to avoid touching dev refcount. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
In order to have better cache layouts of struct sock (separate zones for rx/tx paths), we need this preliminary patch. Goal is to transfert fields used at lookup time in the first read-mostly cache line (inside struct sock_common) and move sk_refcnt to a separate cache line (only written by rx path) This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr, sport and id fields. This allows a future patch to define these fields as macros, like sk_refcnt, without name clashes. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2009 1 次提交
-
-
由 David S. Miller 提交于
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2009 1 次提交
-
-
由 Shan Wei 提交于
Due to man page of setsockopt, if optlen is not valid, kernel should return -EINVAL. But a simple testcase as following, errno is 0, which means setsockopt is successful. addr.s_addr = inet_addr("192.1.2.3"); setsockopt(s, IPPROTO_IP, IP_MULTICAST_IF, &addr, 1); printf("errno is %d\n", errno); Xiaotian Feng(dfeng@redhat.com) caught the bug. We fix it firstly checking the availability of optlen and then dealing with the logic like other options. Reported-by: NXiaotian Feng <dfeng@redhat.com> Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb Delete skb->rtable field Setting rtable is not allowed, just set dst instead as rtable is an alias. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2009 2 次提交
-
-
由 Nivedita Singhvi 提交于
After some discussion offline with Christoph Lameter and David Stevens regarding multicast behaviour in Linux, I'm submitting a slightly modified patch from the one Christoph submitted earlier. This patch provides a new socket option IP_MULTICAST_ALL. In this case, default behaviour is _unchanged_ from the current Linux standard. The socket option is set by default to provide original behaviour. Sockets wishing to receive data only from multicast groups they join explicitly will need to clear this socket option. Signed-off-by: NNivedita Singhvi <niv@us.ibm.com> Signed-off-by: Christoph Lameter<cl@linux.com> Acked-by: NDavid Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Pure cleanups Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
Fixes sparse warnings: net/ipv4/ip_sockglue.c:146:15: warning: incorrect type in assignment (different base types) net/ipv4/ip_sockglue.c:146:15: expected restricted __be16 [assigned] [usertype] sin_port net/ipv4/ip_sockglue.c:146:15: got unsigned short [unsigned] [short] [usertype] <noident> net/ipv4/ip_sockglue.c:130:6: warning: symbol 'ip_cmsg_recv_dstaddr' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2008 1 次提交
-
-
由 Balazs Scheidler 提交于
In case UDP traffic is redirected to a local UDP socket, the originally addressed destination address/port cannot be recovered with the in-kernel tproxy. This patch adds an IP_RECVORIGDSTADDR sockopt that enables a IP_ORIGDSTADDR ancillary message in recvmsg(). This ancillary message contains the original destination address/port of the packet being received. Signed-off-by: NBalazs Scheidler <bazsi@balabit.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 11月, 2008 1 次提交
-
-
由 Jianjun Kong 提交于
Signed-off-by: NJianjun Kong <jianjun@zeuux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2008 1 次提交
-
-
由 KOVACS Krisztian 提交于
This patch introduces the IP_TRANSPARENT socket option: enabling that will make the IPv4 routing omit the non-local source address check on output. Setting IP_TRANSPARENT requires NET_ADMIN capability. Signed-off-by: NKOVACS Krisztian <hidden@sch.bme.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-