This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it.  However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Forever ago I made the worst case calculator say that we could potentially split
into 3 blocks for every level on the way down, which isn't right.  If we split
we're only going to get two new blocks, the one we originally cow'ed and the new
one we're going to split.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This reverts commit 70afa399.  It is causing
performance issues and wasn't actually correct.  There were problems with the
way we flushed delalloc and that was the real cause of the early enospc.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Various people have hit a deadlock when running btrfs/011.  This is because when
replacing nocow extents we will take the i_mutex to make sure nobody messes with
the file while we are replacing the extent.  The problem is we are already
holding a transaction open, which is a locking inversion, so instead we need to
save these inodes we find and then process them outside of the transaction.

Further we can't just lock the inode and assume we are good to go.  We need to
lock the extent range and then read back the extent cache for the inode to make
sure the extent really still points at the physical block we want.  If it
doesn't we don't have to copy it.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

So if we have dir_index items in the log that means we also have the inode item
as well, which means that the inode's i_size is correct.  However when we
process dir_index'es we call btrfs_add_link() which will increase the
directory's i_size for the new entry.  To fix this we need to just set the dir
items i_size to 0, and then as we find dir_index items we adjust the i_size.
btrfs_add_link() will do it for new entries, and if the entry already exists we
can just add the name_len to the i_size ourselves.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

A user reported a bug where his log would not replay because he was getting
-EEXIST back.  This was because he had a file moved into a directory that was
logged.  What happens is the file had a lower inode number, and so it is
processed first when replaying the log, and so we add the inode ref in for the
directory it was moved to.  But then we process the directories DIR_INDEX item
and try to add the inode ref for that inode and it fails because we already
added it when we replayed the inode.  To solve this problem we need to just
process any DIR_INDEX items we have in the log first so this all is taken care
of, and then we can replay the rest of the items.  With this patch my reproducer
can remount the file system properly instead of erroring out.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Liu introduced a local copy of the last log commit for an inode to make sure we
actually log an inode even if a log commit has already taken place.  In order to
make sure we didn't relog the same inode multiple times he set this local copy
to the current trans when we log the inode, because usually we log the inode and
then sync the log.  The exception to this is during rename, we will relog an
inode if the name changed and it is already in the log.  The problem with this
is then we go to sync the inode, and our check to see if the inode has already
been logged is tripped and we don't sync the log.  To fix this we need to _also_
check against the roots last log commit, because it could be less than what is
in our local copy of the log commit.  This fixes a bug where we rename a file
into a directory and then fsync the directory and then on remount the directory
is no longer there.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If you just create a directory and then fsync that directory and then pull the
power plug you will come back up and the directory will not be there.  That is
because we won't actually create directories if we've logged files inside of
them since they will be created on replay, but in this check we will set our
logged_trans of our current directory if it happens to be a directory, making us
think it doesn't need to be logged.  Fix the logic to only do this to parent
directories.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

So forever we have had this thing to limit the amount of delalloc pages we'll
setup to be written out to 128mb.  This is because we have to lock all the pages
in this range, so anything above this gets a bit unweildly, and also without a
limit we'll happily allocate gigantic chunks of disk space.  Turns out our check
for this wasn't quite right, we wouldn't actually limit the chunk we wanted to
write out, we'd just stop looking for more space after we went over the limit.
So if you do a giant 20gb dd on my box with lots of ram I could get 2gig
extents.  This is fine normally, except when you go to relocate these extents
and we can't find enough space to relocate these moster extents, since we have
to be able to allocate exactly the same sized extent to move it around.  So fix
this by actually enforcing the limit.  With this patch I'm no longer seeing
giant 1.5gb extents.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

By the current code, if the requested size is very large, and all the extents
in the free space cache are small, we will waste lots of the cpu time to cut
the requested size in half and search the cache again and again until it gets
down to the size the allocator can return. In fact, we can know the max extent
size in the cache after the first search, so we needn't cut the size in half
repeatedly, and just use the max extent size directly. This way can save
lots of cpu time and make the performance grow up when there are only fragments
in the free space cache.

According to my test, if there are only 4KB free space extents in the fs,
and the total size of those extents are 256MB, we can reduce the execute
time of the following test from 5.4s to 1.4s.
  dd if=/dev/zero of=<testfile> bs=1MB count=1 oflag=sync

Changelog v2 -> v3:
- fix the problem that we skip the block group with the space which is
  less than we need.

Changelog v1 -> v2:
- address the problem that we return a wrong start position when searching
  the free space in a bitmap.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We want to know if there are debugging features compiled in, this may
affect performance. The message is printed before the sanity checks.

(This commit message is a copy of David Sterba's commit message when
he introduced btrfs_print_info()).
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Instead of removing the current inode from the red black tree
and then add the new one, just use the red black tree replace
operation, which is more efficient.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If replace was suspended by the umount, replace target device is added
to the fs_devices->alloc_list during a later mount.  This is obviously
wrong.  ->is_tgtdev_for_dev_replace is supposed to guard against that,
but ->is_tgtdev_for_dev_replace is (and can only ever be) initialized
*after* everything is opened and fs_devices lists are populated.  Fix
this by checking the devid instead: for replace targets it's always
equal to BTRFS_DEV_REPLACE_DEVID.

Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we failed to actually allocate the correct size of the extent to relocate we
will end up in an infinite loop because we won't return an error, we'll just
move on to the next extent.  So fix this up by returning an error, and then fix
all the callers to return an error up the stack rather than BUG_ON()'ing.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Linux 3.11

Pull SCSI fix from James Bottomley:
 "This is a bug fix for the pm80xx driver.  It turns out that when the
  new hardware support was added in 3.10 the IO command size was kept at
  the old hard coded value.  This means that the driver attaches to some
  new cards and then simply hangs the system"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] pm80xx: fix Adaptec 71605H hang

Pull x86 boot fix from Peter Anvin:
 "A single very small boot fix for very large memory systems (> 0.5T)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM

Pull slave-dma fix from Vinod Koul:
 "A fix for resolving TI_EDMA driver's build error in allmodconfig to
  have filter function built in""

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma/Kconfig: TI_EDMA needs to be boolean

When the binary search returns 0 (exact match), the target key
will necessarily be at slot 0 of all nodes below the current one,
so in this case the binary search is not needed because it will
always return 0, and we waste time doing it, holding node locks
for longer than necessary, etc.

Below follow histograms with the times spent on the current approach of
doing a binary search when the previous binary search returned 0, and
times for the new approach, which directly picks the first item/child
node in the leaf/node.

Current approach:

Count: 6682
Range: 35.000 - 8370.000; Mean: 85.837; Median: 75.000; Stddev: 106.429
Percentiles:  90th: 124.000; 95th: 145.000; 99th: 206.000
  35.000 -   61.080:  1235 ################
  61.080 -  106.053:  4207 #####################################################
 106.053 -  183.606:  1122 ##############
 183.606 -  317.341:   111 #
 317.341 -  547.959:     6 |
 547.959 - 8370.000:     1 |

Approach proposed by this patch:

Count: 6682
Range:  6.000 - 135.000; Mean: 16.690; Median: 16.000; Stddev:  7.160
Percentiles:  90th: 23.000; 95th: 27.000; 99th: 40.000
   6.000 -    8.418:    58 #
   8.418 -   11.670:  1149 #########################
  11.670 -   16.046:  2418 #####################################################
  16.046 -   21.934:  2098 ##############################################
  21.934 -   29.854:   744 ################
  29.854 -   40.511:   154 ###
  40.511 -   54.848:    41 #
  54.848 -   74.136:     5 |
  74.136 -  100.087:     9 |
 100.087 -  135.000:     6 |

These samples were captured during a run of the btrfs tests 001, 002 and
004 in the xfstests, with a leaf/node size of 4Kb.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We only need an async starter if we can't make a GFP_NOFS allocation in our
current path.  This is the case for the endio stuff since it happens in IRQ
context, but things like the caching thread workers and the delalloc flushers we
can easily make this allocation and start threads right away.  Also change the
worker count for the caching thread pool.  Traditionally we limited this to 2
since we took read locks while caching, but nowadays we do this lockless so
there's no reason to limit the number of caching threads.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This fixes a problem where if we fail a truncate we will leave the i_size set
where we wanted to truncate to instead of where we were able to truncate to.
Fix this by making btrfs_truncate_inode_items do the disk_i_size update as it
removes extents, that way it will always be consistent with where its extents
are.  Then if the truncate fails at all we can update the in-ram i_size with
what we have on disk and delete the orphan item.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If there's an ongoing transaction when the uuid scan kthread attempts
to create one, the kthread will block, waiting for that transaction to
finish while it's keeping locks on the tree root, and in turn the existing
transaction is waiting for those locks to be free.

The stack trace reported by the kernel follows.

[36700.671601] INFO: task btrfs-uuid:15480 blocked for more than 120 seconds.
[36700.671602] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[36700.671602] btrfs-uuid      D 0000000000000000     0 15480      2 0x00000000
[36700.671604]  ffff880710bd5b88 0000000000000046 ffff8803d36ba850 0000000000030000
[36700.671605]  ffff8806d76dc530 ffff880710bd5fd8 ffff880710bd5fd8 ffff880710bd5fd8
[36700.671607]  ffff8808098ac530 ffff8806d76dc530 ffff880710bd5b98 ffff8805e4508e40
[36700.671608] Call Trace:
[36700.671610]  [<ffffffff816f36b9>] schedule+0x29/0x70
[36700.671620]  [<ffffffffa05a3bdf>] wait_current_trans.isra.33+0xbf/0x120 [btrfs]
[36700.671623]  [<ffffffff81066760>] ? add_wait_queue+0x60/0x60
[36700.671629]  [<ffffffffa05a5b06>] start_transaction+0x3d6/0x530 [btrfs]
[36700.671636]  [<ffffffffa05bb1f4>] ? btrfs_get_token_32+0x64/0xf0 [btrfs]
[36700.671642]  [<ffffffffa05a5fbb>] btrfs_start_transaction+0x1b/0x20 [btrfs]
[36700.671649]  [<ffffffffa05c8a81>] btrfs_uuid_scan_kthread+0x211/0x3d0 [btrfs]
[36700.671655]  [<ffffffffa05c8870>] ? __btrfs_open_devices+0x2a0/0x2a0 [btrfs]
[36700.671657]  [<ffffffff81065fa0>] kthread+0xc0/0xd0
[36700.671659]  [<ffffffff81065ee0>] ? flush_kthread_worker+0xb0/0xb0
[36700.671661]  [<ffffffff816fcd1c>] ret_from_fork+0x7c/0xb0
[36700.671662]  [<ffffffff81065ee0>] ? flush_kthread_worker+0xb0/0xb0
[36700.671663] INFO: task btrfs:15481 blocked for more than 120 seconds.
[36700.671664] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[36700.671665] btrfs           D 0000000000000000     0 15481  15212 0x00000004
[36700.671666]  ffff880248cbf4c8 0000000000000086 ffff8803d36ba700 ffff8801dbd5c280
[36700.671668]  ffff880807815c40 ffff880248cbffd8 ffff880248cbffd8 ffff880248cbffd8
[36700.671669]  ffff8805e86a0000 ffff880807815c40 ffff880248cbf4d8 ffff8801dbd5c280
[36700.671670] Call Trace:
[36700.671672]  [<ffffffff816f36b9>] schedule+0x29/0x70
[36700.671679]  [<ffffffffa05d9b0d>] btrfs_tree_lock+0x6d/0x230 [btrfs]
[36700.671680]  [<ffffffff81066760>] ? add_wait_queue+0x60/0x60
[36700.671685]  [<ffffffffa0582829>] btrfs_search_slot+0x999/0xb00 [btrfs]
[36700.671691]  [<ffffffffa05bd9de>] ? btrfs_lookup_first_ordered_extent+0x5e/0xb0 [btrfs]
[36700.671698]  [<ffffffffa05e3e54>] __btrfs_write_out_cache+0x8c4/0xa80 [btrfs]
[36700.671704]  [<ffffffffa05e4362>] btrfs_write_out_cache+0xb2/0xf0 [btrfs]
[36700.671710]  [<ffffffffa05c4441>] ? free_extent_buffer+0x61/0xc0 [btrfs]
[36700.671716]  [<ffffffffa0594c82>] btrfs_write_dirty_block_groups+0x562/0x650 [btrfs]
[36700.671723]  [<ffffffffa0610092>] commit_cowonly_roots+0x171/0x24b [btrfs]
[36700.671729]  [<ffffffffa05a4dde>] btrfs_commit_transaction+0x4fe/0xa10 [btrfs]
[36700.671735]  [<ffffffffa0610af3>] create_subvol+0x5c0/0x636 [btrfs]
[36700.671742]  [<ffffffffa05d49ff>] btrfs_mksubvol.isra.60+0x33f/0x3f0 [btrfs]
[36700.671747]  [<ffffffffa05d4bf2>] btrfs_ioctl_snap_create_transid+0x142/0x190 [btrfs]
[36700.671752]  [<ffffffffa05d4c6c>] ? btrfs_ioctl_snap_create+0x2c/0x80 [btrfs]
[36700.671757]  [<ffffffffa05d4c9e>] btrfs_ioctl_snap_create+0x5e/0x80 [btrfs]
[36700.671759]  [<ffffffff8113a764>] ? handle_pte_fault+0x84/0x920
[36700.671764]  [<ffffffffa05d87eb>] btrfs_ioctl+0xf0b/0x1d00 [btrfs]
[36700.671766]  [<ffffffff8113c120>] ? handle_mm_fault+0x210/0x310
[36700.671768]  [<ffffffff816f83a4>] ? __do_page_fault+0x284/0x4e0
[36700.671770]  [<ffffffff81180aa6>] do_vfs_ioctl+0x96/0x550
[36700.671772]  [<ffffffff81170fe3>] ? __sb_end_write+0x33/0x70
[36700.671774]  [<ffffffff81180ff1>] SyS_ioctl+0x91/0xb0
[36700.671775]  [<ffffffff816fcdc2>] system_call_fastpath+0x16/0x1b
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

AFAICT chunk 0 is no longer special, and so it should be restriped just
like every other chunk.  One reason for this change is us refusing the
relocation can lead to filesystems that can only be mounted ro, and
never rw -- see the bugzilla [1] for details.  The other reason is that
device removal code is already doing this: it will happily relocate
chunk 0 is part of shrinking the device.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=60594Reported-by: NXavier Bassery <xavier@bartica.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

To get name of the file from a pathname let's use kbasename() helper. It allows
to simplify code a bit.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

now threads can return BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS
as defined in btrfs.h for the dev excl operation error in
the FS, which means with this kernel would stop logging
(almost an user error) into the /var/log/messages

v2: accepts Josef' comment
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We currently have this problem where you can truncate pages that have not yet
been written for an ordered extent.  We do this because the truncate will be
coming behind to clean us up anyway so what's the harm right?  Well if truncate
fails for whatever reason we leave an orphan item around for the file to be
cleaned up later.  But if the user goes and truncates up the file and tries to
read from the area that had been discarded previously they will get a csum error
because we never actually wrote that data out.

This patch fixes this by allowing us to either discard the ordered extent
completely, by which I mean we just free up the space we had allocated and not
add the file extent, or adjust the length of the file extent we write.  We do
this by setting the length we truncated down to in the ordered extent, and then
we set the file extent length and ram bytes to this length.  The total disk
space stays unchanged since we may be compressed and we can't just chop off the
disk space, but at least this way the file extent only points to the valid data.
Then when the file extent is free'd the extent and csums will be freed normally.

This patch is needed for the next series which will give us more graceful
recovery of failed truncates.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

All of these are logic checks to make sure we're not breaking anything, so
convert them over to ASSERT().  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

One of the complaints we get a lot is how many BUG_ON()'s we have.  So to help
with this I'm introducing a kconfig option to enable/disable a new ASSERT()
mechanism much like what XFS does.  This will allow us developers to still get
our nice panics but allow users/distros to compile them out.  With this we can
go through and convert any BUG_ON()'s that we have to catch actual programming
mistakes to the new ASSERT() and then fix everybody else to return errors.  This
will also allow developers to leave sanity checks in their new code to make sure
we don't trip over problems while testing stuff and vetting new features.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I noticed that if I tried to mount a file system with -o degraded after having
done it once already we would fail to mount.  This is because the
fs_devices->missing count was getting bumped everytime we mounted, but not
getting reset whenever we unmounted.  To fix this we just drop the missing count
as we're closing devices to make sure this doesn't happen.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

btrfs_read_fs_root_no_name() already checks if btrfs_root_refs()
is zero and returns ENOENT in this case. There is no need to do
it again in three more places.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Mitch Harder noticed that the patch 3c64a1ab mentioned in the subject
line was causing a kernel BUG() on snapshot deletion.

The patch was wrong. It did not handle cached roots correctly. The
check for root_refs == 0 was removed everywhere where
btrfs_read_fs_root_no_name() had been used to retrieve the root,
because this check was already dealt with in
btrfs_read_fs_root_no_name(). But in the case when the root was
found in the cache, there was no such check.

This patch adds the missing check in the case where the root is
found in the cache.
Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The second round uses btrfs_error() and return -EIO, the first round
can handle write errors the same way.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

struct __prelim_ref is allocated and freed frequently when
walking backref tree, using slab allocater can not only
speed up allocating but also detect memory leaks.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Currently, only add_delayed_refs have to allocate with GFP_ATOMIC,
So just pass arg 'gfp_t' to decide which allocation mode.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The handler for the ioctl BTRFS_IOC_FS_INFO was reading the
number of devices before acquiring the device list mutex.

This could lead to inconsistent results because the update of
the device list and the number of devices counter (amongst other
counters related to the device list) are updated in volumes.c
while holding the device list mutex - except for 2 places, one
was volumes.c:btrfs_prepare_sprout() and the other was
volumes.c:device_list_add().

For example, if we have 2 devices, with IDs 1 and 2 and then add
a new device, with ID 3, and while adding the device is in progress
an BTRFS_IOC_FS_INFO ioctl arrives, it could return a number of
devices of 2 and a max dev id of 3. This would be incorrect.

Also, this ioctl handler was reading the fsid while it can be
updated concurrently. This can happen when while a new device is
being added and the current filesystem is in seeding mode.
Example:

$ mkfs.btrfs -f /dev/sdb1
$ mkfs.btrfs -f /dev/sdb2
$ btrfstune -S 1 /dev/sdb1
$ mount /dev/sdb1 /mnt/test
$ btrfs device add /dev/sdb2 /mnt/test

If during the last step a BTRFS_IOC_FS_INFO ioctl was requested, it
could read an fsid that was never valid (some bits part of the old
fsid and others part of the new fsid). Also, it could read a number
of devices that doesn't match the number of devices in the list and
the max device id, as explained before.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This change fixes an issue when removing a device and writing
all super blocks run simultaneously. Here's the steps necessary
for the issue to happen:

1) disk-io.c:write_all_supers() gets a number of N devices from the
   super_copy, so it will not panic if it fails to write super blocks
   for N - 1 devices;

2) Then it tries to acquire the device_list_mutex, but blocks because
   volumes.c:btrfs_rm_device() got it first;

3) btrfs_rm_device() removes the device from the list, then unlocks the
   mutex and after the unlock it updates the number of devices in
   super_copy to N - 1.

4) write_all_supers() finally acquires the mutex, iterates over all the
   devices in the list and gets N - 1 errors, that is, it failed to write
   super blocks to all the devices;

5) Because write_all_supers() thinks there are a total of N devices, it
   considers N - 1 errors to be ok, and therefore won't panic.

So this change just makes sure that write_all_supers() reads the number
of devices from super_copy after it acquires the device_list_mutex.
Conversely, it changes btrfs_rm_device() to update the number of devices
in super_copy before it releases the device list mutex.

The code path to add a new device (volumes.c:btrfs_init_new_device),
already has the right behaviour: it updates the number of devices in
super_copy while holding the device_list_mutex.

The only code path that doesn't lock the device list mutex
before updating the number of devices in the super copy is
disk-io.c:next_root_backup(), called by open_ctree() during
mount time where concurrency issues can't happen.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

A user was reporting weird warnings from btrfs_put_delayed_ref() and I noticed
that we were doing this list_del_init() on our head ref outside of
delayed_refs->lock.  This is a problem if we have people still on the list, we
could end up modifying old pointers and such.  Fix this by removing us from the
list before we do our run_delayed_ref on our head ref.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>