Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 14 9月, 2015 3 次提交
  3. 04 9月, 2015 14 次提交
  5. 03 9月, 2015 7 次提交
    • A
      perf tools: Fix use of wrong event when processing exit events · 53ff6bc3
      由 Adrian Hunter 提交于 
      In a couple of cases the 'comm' member of 'union event' has been used
instead of the correct member ('fork') when processing exit events.

In the cases where it has been used incorrectly, only the 'pid' and
'tid' are affected.  The 'pid' value would be correct anyway because it
is in the same position in 'comm' and 'fork' events, but the 'tid' would
have been incorrectly assigned from 'ppid'.

However, for exit events, the kernel puts the current task in the 'ppid'
and 'ttid' which is the same as the exiting task.  That is 'ppid' ==
'pid' and if the task is not multi-threaded, 'pid' == 'tid' i.e. the
data goes wrong only when tracing multi-threaded programs.

It is hard to find an example of how this would produce an error in
practice.  There are 3 occurences of the fix:

1. perf script is only affected if !sample_id_all which only happens on
  old kernels.

2. intel_pt is only affected when decoding without timestamps
   and would probably still decode correctly - the exit event is
   only used to flush out data which anyway gets flushed at the
   end of the session

3. intel_bts also uses the exit event to flush data which
   would probably not cause errors as it would get flushed at
   the end of the session instead
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439888825-27708-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      53ff6bc3
    • J
      perf tools: Move tracing_path stuff under same namespace · 65d4b265
      由 Jiri Olsa 提交于 
      Renaming all functions touching tracing_path under same namespace. New
interface is:

  char tracing_path[];
  - tracing mount path

  char tracing_events_path[];
  - tracing mount/events path

  void tracing_path_set(const char *mountpoint);
  - setting directly tracing_path(_events), used by --debugfs-dir option

  const char *tracing_path_mount(void);
  - initial setup of tracing_(events)_path, called from perf.c
    mounts debugfs/tracefs if needed and possible

  char *get_tracing_file(const char *name);
  void put_tracing_file(char *file);
  - get/put tracing file path
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      65d4b265
    • J
      perf tools: Remove mountpoint arg from perf_debugfs_mount · f6a09af7
      由 Jiri Olsa 提交于 
      It's not used by any caller. We either detect the mountpoint or use
hardcoded one.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f6a09af7
    • K
      perf tools: Store the cpu socket and core ids in the perf.data header · 2bb00d2f
      由 Kan Liang 提交于 
      This patch stores the cpu socket_id and core_id in a perf.data header,
and reads them into the perf_env struct when processing perf.data files.

The changes modifies the CPU_TOPOLOGY section, making sure it is
backward/forward compatible.

The patch checks the section size before reading the core and socket ids.

It never reads data crossing the section boundary.  An old perf binary
without this patch can also correctly read the perf.data from a new perf
with this patch.

Because the new info is added at the end of the cpu_topology section, an
old perf tool ignores the extra data.

Examples:

1. New perf with this patch read perf.data from an old perf without the
   patch:

  $ perf_new report -i perf_old.data --header-only -I
  ......
  # sibling threads : 33
  # sibling threads : 34
  # sibling threads : 35
  # Core ID and Socket ID information is not available
  # node0 meminfo  : total = 32823872 kB, free = 29315548 kB
  # node0 cpu list : 0-17,36-53
  ......

2. Old perf without the patch reads perf.data from a new perf with the
   patch:

  $ perf_old report -i perf_new.data --header-only -I
  ......
  # sibling threads : 33
  # sibling threads : 34
  # sibling threads : 35
  # node0 meminfo  : total = 32823872 kB, free = 29190932 kB
  # node0 cpu list : 0-17,36-53
  ......

3. New perf read new perf.data:

  $ perf_new report -i perf_new.data --header-only -I
  ......
  # sibling threads : 33
  # sibling threads : 34
  # sibling threads : 35
  # CPU 0: Core ID 0, Socket ID 0
  # CPU 1: Core ID 1, Socket ID 0
  ......
  # CPU 61: Core ID 10, Socket ID 1
  # CPU 62: Core ID 11, Socket ID 1
  # CPU 63: Core ID 16, Socket ID 1
  # node0 meminfo  : total = 32823872 kB, free = 29190932 kB
  # node0 cpu list : 0-17,36-53
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-2-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2bb00d2f
    • K
      perf cpumap: Factor out functions to get core_id and socket_id · 193b6bd3
      由 Kan Liang 提交于 
      This patch moves the code which reads core_id and socket_id into
separate functions.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      193b6bd3
    • H
      tools lib traceevent: Support function __get_dynamic_array_len · 76055940
      由 He Kuang 提交于 
      Support helper function __get_dynamic_array_len() in libtraceevent, this
function is used accompany with __print_array() or __print_hex(), but
currently it is not an available function in the function list of
process_function().

The total allocated length of the dynamic array is embedded in the top
half of __data_loc_##item field. This patch adds new arg type
PRINT_DYNAMIC_ARRAY_LEN to return the length to eval_num_arg(),
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-32-git-send-email-wangnan0@huawei.comSigned-off-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      76055940
    • A
      perf tools: Always use non inlined file name for 'srcfile' sort key · 2f84b42b
      由 Andi Kleen 提交于 
      When profiling the kernel with the 'srcfile' sort key it's common to
"get stuck" in include. For example a lot of code uses current or other
inlines, so they get accounted to some random include file. This is not
very useful as a high level categorization.

For example just profiling the idle loop usually shows mostly inlines,
so you never see the actual cpuidle file.

This patch changes the 'srcfile' sort key to always unwind the inline
stack using BFD/DWARF. So we always account to the base function that
called the inline.

In a few cases include is still shown (for example for MSR accesses),
but that is because they get inlining expanded as part of assigning to a
global function pointer. For the majority it works fine though.

v2: Use simpler while loop. Add maximum iteration count.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441133239-31254-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2f84b42b
  7. 02 9月, 2015 3 次提交
  9. 01 9月, 2015 4 次提交
    • S
      perf record: Add ability to name registers to record · bcc84ec6
      由 Stephane Eranian 提交于 
      This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.

The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.

With no parameter, the --intr-regs still records all possible registers
based on the architecture.

To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:

  $ perf record --intr-regs=si,di,r8,r9 .....

To record any possible registers:

  $ perf record -I .....
  $ perf report --intr-regs ...

To display the register, one can use perf report -D

To list the available registers:

  $ perf record --intr-regs=\?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: NStephane Eranian <eranian@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bcc84ec6
    • S
      perf/x86: Add list of register names · c5e991ee
      由 Stephane Eranian 提交于 
      This patch adds a way to locate a register identifier (PERF_X86_REG_*)
based on its name, e.g., AX.

This will be used by a subsequent patch to improved flexibility of perf
record.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-3-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c5e991ee
    • K
      perf evlist: Open event on evsel cpus and threads · d988d5ee
      由 Kan Liang 提交于 
      An evsel may have different cpus and threads than the evlist it is in.

Use it's own cpus and threads, when opening the evsel in 'perf record'.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440138194-17001-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d988d5ee
    • A
      perf tools: Fix build on powerpc broken by pt/bts · 97db6206
      由 Adrian Hunter 提交于 
      It is theoretically possible to process perf.data files created on x86
and that contain Intel PT or Intel BTS data, on any other architecture,
which is why it is possible for there to be build errors on powerpc
caused by pt/bts.

The errors were:

	util/intel-pt-decoder/intel-pt-insn-decoder.c: In function ‘intel_pt_insn_decoder’:
	util/intel-pt-decoder/intel-pt-insn-decoder.c:138:3: error: switch missing default case [-Werror=switch-default]
	   switch (insn->immediate.nbytes) {
	   ^
	cc1: all warnings being treated as errors

	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_synth_branch_sample':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:871: undefined reference to `tsc_to_perf_time'
	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_sample':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:915: undefined reference to `tsc_to_perf_time'
	sources/linux-acme.git/tools/perf/util/intel-pt.c:962: undefined reference to `tsc_to_perf_time'
	linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_process_event':
	sources/linux-acme.git/tools/perf/util/intel-pt.c:1454: undefined reference to `perf_time_to_tsc'
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441046384-28663-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      97db6206
  11. 29 8月, 2015 6 次提交
  13. 26 8月, 2015 3 次提交
    • W
      perf probe: Support probing at absolute address · da15bd9d
      由 Wang Nan 提交于 
      It should be useful to allow 'perf probe' probe at absolute offset of a
target. For example, when (u)probing at a instruction of a shared object
in a embedded system where debuginfo is not avaliable but we know the
offset of that instruction by manually digging.

This patch enables following perf probe command syntax:

  # perf probe 0xffffffff811e6615

And

  # perf probe /lib/x86_64-linux-gnu/libc-2.19.so 0xeb860

In the above example, we don't need a anchor symbol, so it is possible
to compute absolute addresses using other methods and then use 'perf
probe' to create the probing points.

v1 -> v2:
  Drop the leading '+' in cmdline;
  Allow uprobing at offset 0x0;
  Improve 'perf probe -l' result when uprobe at area without debuginfo.

v2 -> v3:
  Split bugfix to a separated patch.

Test result:

  # perf probe 0xffffffff8119d175 %ax
  # perf probe sys_write %ax
  # perf probe /lib64/libc-2.18.so 0x0 %ax
  # perf probe /lib64/libc-2.18.so 0x5 %ax
  # perf probe /lib64/libc-2.18.so 0xd8e40 %ax
  # perf probe /lib64/libc-2.18.so __write %ax
  # perf probe /lib64/libc-2.18.so 0xd8e49 %ax
  # cat /sys/kernel/debug/tracing/uprobe_events

  p:probe_libc/abs_0 /lib64/libc-2.18.so:0x          (null) arg1=%ax
  p:probe_libc/abs_5 /lib64/libc-2.18.so:0x0000000000000005 arg1=%ax
  p:probe_libc/abs_d8e40 /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
  p:probe_libc/__write /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
  p:probe_libc/abs_d8e49 /lib64/libc-2.18.so:0x00000000000d8e49 arg1=%ax

  # cat /sys/kernel/debug/tracing/kprobe_events

  p:probe/abs_ffffffff8119d175 0xffffffff8119d175 arg1=%ax
  p:probe/sys_write _text+1692016 arg1=%ax

  # perf probe -l

  Failed to find debug information for address 5
    probe:abs_ffffffff8119d175 (on sys_write+5 with arg1)
    probe:sys_write      (on sys_write with arg1)
    probe_libc:__write   (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_0     (on 0x0 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_5     (on 0x5 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_d8e40 (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
    probe_libc:abs_d8e49 (on __GI___libc_write+9 in /lib64/libc-2.18.so with arg1)
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-7-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      da15bd9d
    • W
      perf probe: Fix error reported when offset without function · 6c6e024f
      由 Wang Nan 提交于 
      This patch fixes a bug that, when offset is provided but function is
lost, parse_perf_probe_point() will give a "" string as function name,
so the checking code at the end of parse_perf_probe_point() become
useless.  For example:

  # perf probe +0x1234
  Failed to find symbol  in kernel
    Error: Failed to add events.

After this patch:

  # perf probe +0x1234
  Semantic error :Offset requires an entry function.
    Error: Command Parse Error.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-6-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6c6e024f
    • W
      perf probe: Fix list result when address is zero · be07afe9
      由 Wang Nan 提交于 
      When manually added uprobe point with zero address, 'perf probe -l'
reports error. For example:

  # echo p:probe_libc/abs_0 /path/to/lib.bin:0x0 arg1=%ax > \
           /sys/kernel/debug/tracing/uprobe_events

  # perf probe -l
  Error: Failed to show event list.

Probing at 0x0 is possible and useful when lib.bin is not a normal
shared object but is manually mapped. However, in this case kernel
report:

  # cat /sys/kernel/debug/tracing/uprobe_events
  p:probe_libc/abs_0 /path/to/lib.bin:0x          (null) arg1=%ax

This patch supports the above kernel output.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-5-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      be07afe9