- 26 8月, 2010 20 次提交
-
-
由 Amerigo Wang 提交于
Remove "lro" parameter of s2io driver. Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: jon.mason@exar.com Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Counters for packets received due to internal switching are already available. This change will start displaying them in ethtool -S Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
The BE ASIC/firmware doesnot reserve and assign MAC address for VFs. This results in the VF interfaces being created with MAC Address 0. The code change proposed takes the MAC address of PF to generate a seed. MAC Address for VFs are assigned incrementally starting from the seed. These addresses are programmed in the ASIC by the PF and the VF driver queries for the MAC address during its probe. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
If bridge port is offline, don't call ethtool to query speed. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Breno Leitao 提交于
Currently qlge can deadlock when the interface is going down, and the mpi_port_cfg_work() is executing on another processor. It happens because unregister_netdev() holds the rtnl lock, and the mpi_port_cfg_work() also request this lock. Since unregiter_netdev() may wait mpi_port_cfg_work(), who also request the holding lock, it can cause an deadlock, displaying the following error: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 00000080c6c1d190 0 3993 2081 0x00008080 Call Trace: [c000000975f56ee0] [c0000000000152a0] .__switch_to+0x100/0x1d0 [c000000975f56f70] [c0000000005781b4] .schedule+0x3a4/0x8c0 [c000000975f570c0] [c000000000578e8c] .schedule_timeout+0x24c/0x350 [c000000975f571e0] [c000000000578a88] .wait_for_common+0x198/0x210 [c000000975f572c0] [c0000000000abbb4] .__cancel_work_timer+0x2c4/0x2e0 [c000000975f57400] [d0000000078e7a20] .ql_adapter_down+0x80/0x260 [qlge] [c000000975f574b0] [d0000000078e7d80] .qlge_close+0x70/0x130 [qlge] [c000000975f57540] [c000000000497ef8] .__dev_close+0x98/0xf0 [c000000975f575d0] [c000000000497f74] .dev_close+0x24/0x60 [c000000975f57650] [c000000000498080] .rollback_registered_many+0xd0/0x2b0 [c000000975f576f0] [c000000000498338] .rollback_registered+0x38/0x50 [c000000975f57780] [c0000000004983d8] .unregister_netdevice_queue+0x88/0xe0 [c000000975f57810] [c000000000498574] .unregister_netdev+0x24/0x40 [c000000975f57890] [d0000000078f6f38] .qlge_remove+0x3c/0x78 [qlge] [c000000975f57920] [c0000000002d9298] .pci_device_remove+0x48/0x90 [c000000975f579a0] [c000000000372850] .__device_release_driver+0xa0/0x130 [c000000975f57a30] [c000000000372a08] .driver_detach+0x128/0x150 [c000000975f57ad0] [c000000000371134] .bus_remove_driver+0xc4/0x1a0 [c000000975f57b70] [c00000000037357c] .driver_unregister+0x8c/0xd0 [c000000975f57c00] [c0000000002d968c] .pci_unregister_driver+0x5c/0x110 [c000000975f57ca0] [d0000000078f6ee4] .qlge_exit+0x1c/0x34 [qlge] Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The carrier check is not called from work queue in current code. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
__ip_vs_service_get and __ip_vs_svc_fwm_get increment a reference count, so that reference count should be decremented before leaving the function in an error case. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E; identifier f1; iterator I; @@ x = __ip_vs_service_get(...); <... when != x when != true (x == NULL || ...) when != if (...) { <+...x...+> } when != I (...) { <+...x...+> } ( x == NULL | x == E | x->f1 ) ...> * return ...; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
dev_alloc_skb allocates some memory, so that memory should be freed before leaving the function in an error case. Corrected some typos in a nearby comment as well. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E; identifier f1; iterator I; @@ x = dev_alloc_skb(...); <... when != x when != true (x == NULL || ...) when != if (...) { <+...x...+> } when != I (...) { <+...x...+> } ( x == NULL | x == E | x->f1 ) ...> * return ...; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Its important to store 'final' values in counters, not using them as temporary variables, or this might break some SNMP applications. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This return isn't reachable and it obscures the goto on the line before. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This avoids unnecessary casting and adds the ioaddr in the private structure. This patch also removes many warning when compile the driver. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch removes the CPU_SUBTYPE_ST40 dependency in the driver's Kconfig. In fact, this option has been removed in the commit: f9669187 as reported by Christian Dietrich. Note that the driver remains tested on STM platforms, only. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pawel Moll 提交于
This patch modifies the stmmac_adjust_link() function so the fix_mac_speed() is called not only when link speed is changing between 10 and 100 Mbps (as required in RMII mode) but also for 1000 Mbps. Signed-off-by: NPawel Moll <pawel.moll@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use a private variable to fold rx_dropped value, instead of shared destination buffer, as it might break SNMP applications. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Dmitry Kravkov <dmitry@broadcom.com> Acked-By: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match document. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Privilege function should wait for npar state to be operational before creating context. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
On NIC Partition capable adapter, Administrator can configure to tag packet with particular vlan id. Packet will be tagged and strip with that vlan id. Also if 'Tagging' flag is disable, other packet will be drop. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o remove validation before deleting vlan id o Add missing 'break' while deleting vlan id. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_sdio.c
-
- 25 8月, 2010 20 次提交
-
-
由 David S. Miller 提交于
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’: drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
When Mac address is removed from one port of the CX2 device, the other device should reconfigure its Mac. This fixes an issue with failover, when both ports have the same Mac address, and one of the ports, is closed, the second one stops receiving traffic. (bugzilla #1965 at bugs.openfabrics.org) Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
In case that the rings were not fully filled, the report in Ethtool should be according to the actual size that was filled. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
We might try to use resources which were not activated. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Defined as sum of default number of TX rings and number of rings used for priority flow control mode. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
All port's resources should be closed before we give the CLOSE_PORT command to the firmware. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
When configuring HW resources, the RX ring size that is passed should be the actual size that depends on number of buffers that we succeeded to allocate. The mask for ring size should also be configured accordingly Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
When allocating new fragments to replace the ones that would be passed to the stack, The fragments that should be replaced, are the ones that were already used. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Trivial extension to existing meta data match rules to allow matching on skb receive hash value. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Last use was removed, so remove the #define. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Compiler is not smart enough to avoid a conditional branch. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6由 John W. Linville 提交于
Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h
-
由 Johannes Berg 提交于
Add some documentation for cfg80211. I'm hoping some of the regulatory documentation will be filled by somebody more familiar with it, hint hint! :) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-