1. 18 3月, 2020 6 次提交
  2. 28 7月, 2019 1 次提交
    • T
      ext4: enforce the immutable flag on open files · c9ea4620
      Theodore Ts'o 提交于
      commit 02b016ca7f99229ae6227e7b2fc950c4e140d74a upstream.
      
      According to the chattr man page, "a file with the 'i' attribute
      cannot be modified..."  Historically, this was only enforced when the
      file was opened, per the rest of the description, "... and the file
      can not be opened in write mode".
      
      There is general agreement that we should standardize all file systems
      to prevent modifications even for files that were opened at the time
      the immutable flag is set.  Eventually, a change to enforce this at
      the VFS layer should be landing in mainline.  Until then, enforce this
      at the ext4 level to prevent xfstests generic/553 from failing.
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
      Cc: stable@kernel.org
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c9ea4620
  3. 22 5月, 2019 1 次提交
    • L
      ext4: fix data corruption caused by overlapping unaligned and aligned IO · 0db24122
      Lukas Czerner 提交于
      commit 57a0da28ced8707cb9f79f071a016b9d005caf5a upstream.
      
      Unaligned AIO must be serialized because the zeroing of partial blocks
      of unaligned AIO can result in data corruption in case it's overlapping
      another in flight IO.
      
      Currently we wait for all unwritten extents before we submit unaligned
      AIO which protects data in case of unaligned AIO is following overlapping
      IO. However if a unaligned AIO is followed by overlapping aligned AIO we
      can still end up corrupting data.
      
      To fix this, we must make sure that the unaligned AIO is the only IO in
      flight by waiting for unwritten extents conversion not just before the
      IO submission, but right after it as well.
      
      This problem can be reproduced by xfstest generic/538
      Signed-off-by: NLukas Czerner <lczerner@redhat.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Cc: stable@kernel.org
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0db24122
  4. 27 3月, 2019 1 次提交
    • L
      ext4: fix data corruption caused by unaligned direct AIO · 76c9ee6b
      Lukas Czerner 提交于
      commit 372a03e01853f860560eade508794dd274e9b390 upstream.
      
      Ext4 needs to serialize unaligned direct AIO because the zeroing of
      partial blocks of two competing unaligned AIOs can result in data
      corruption.
      
      However it decides not to serialize if the potentially unaligned aio is
      past i_size with the rationale that no pending writes are possible past
      i_size. Unfortunately if the i_size is not block aligned and the second
      unaligned write lands past i_size, but still into the same block, it has
      the potential of corrupting the previous unaligned write to the same
      block.
      
      This is (very simplified) reproducer from Frank
      
          // 41472 = (10 * 4096) + 512
          // 37376 = 41472 - 4096
      
          ftruncate(fd, 41472);
          io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376);
          io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472);
      
          io_submit(io_ctx, 1, &iocbs[1]);
          io_submit(io_ctx, 1, &iocbs[2]);
      
          io_getevents(io_ctx, 2, 2, events, NULL);
      
      Without this patch the 512B range from 40960 up to the start of the
      second unaligned write (41472) is going to be zeroed overwriting the data
      written by the first write. This is a data corruption.
      
      00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
      *
      00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
      *
      0000a000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
      *
      0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31
      
      With this patch the data corruption is avoided because we will recognize
      the unaligned_aio and wait for the unwritten extent conversion.
      
      00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
      *
      00009200  30 30 30 30 30 30 30 30  30 30 30 30 30 30 30 30
      *
      0000a200  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31
      *
      0000b200
      Reported-by: NFrank Sorenson <fsorenso@redhat.com>
      Signed-off-by: NLukas Czerner <lczerner@redhat.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Fixes: e9e3bcec ("ext4: serialize unaligned asynchronous DIO")
      Cc: stable@vger.kernel.org
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      76c9ee6b
  5. 18 8月, 2018 1 次提交
  6. 14 5月, 2018 3 次提交
  7. 08 1月, 2018 2 次提交
  8. 03 11月, 2017 3 次提交
  9. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman 提交于
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  10. 19 10月, 2017 1 次提交
  11. 02 10月, 2017 1 次提交
  12. 07 9月, 2017 4 次提交
    • J
      mm: remove nr_pages argument from pagevec_lookup{,_range}() · 397162ff
      Jan Kara 提交于
      All users of pagevec_lookup() and pagevec_lookup_range() now pass
      PAGEVEC_SIZE as a desired number of pages.
      
      Just drop the argument.
      
      Link: http://lkml.kernel.org/r/20170726114704.7626-11-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      397162ff
    • J
      ext4: use pagevec_lookup_range() in ext4_find_unwritten_pgoff() · dec0da7b
      Jan Kara 提交于
      Use pagevec_lookup_range() in ext4_find_unwritten_pgoff() since we are
      interested only in pages in the given range.  Simplify the logic as a
      result of not getting pages out of range and index getting automatically
      advanced.
      
      Link: http://lkml.kernel.org/r/20170726114704.7626-6-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
      Cc: "Theodore Ts'o" <tytso@mit.edu>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dec0da7b
    • J
      mm: make pagevec_lookup() update index · d72dc8a2
      Jan Kara 提交于
      Make pagevec_lookup() (and underlying find_get_pages()) update index to
      the next page where iteration should continue.  Most callers want this
      and also pagevec_lookup_tag() already does this.
      
      Link: http://lkml.kernel.org/r/20170726114704.7626-3-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d72dc8a2
    • R
      dax: use common 4k zero page for dax mmap reads · 91d25ba8
      Ross Zwisler 提交于
      When servicing mmap() reads from file holes the current DAX code
      allocates a page cache page of all zeroes and places the struct page
      pointer in the mapping->page_tree radix tree.
      
      This has three major drawbacks:
      
      1) It consumes memory unnecessarily. For every 4k page that is read via
         a DAX mmap() over a hole, we allocate a new page cache page. This
         means that if you read 1GiB worth of pages, you end up using 1GiB of
         zeroed memory. This is easily visible by looking at the overall
         memory consumption of the system or by looking at /proc/[pid]/smaps:
      
      	7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12   /root/dax/data
      	Size:            1048576 kB
      	Rss:             1048576 kB
      	Pss:             1048576 kB
      	Shared_Clean:          0 kB
      	Shared_Dirty:          0 kB
      	Private_Clean:   1048576 kB
      	Private_Dirty:         0 kB
      	Referenced:      1048576 kB
      	Anonymous:             0 kB
      	LazyFree:              0 kB
      	AnonHugePages:         0 kB
      	ShmemPmdMapped:        0 kB
      	Shared_Hugetlb:        0 kB
      	Private_Hugetlb:       0 kB
      	Swap:                  0 kB
      	SwapPss:               0 kB
      	KernelPageSize:        4 kB
      	MMUPageSize:           4 kB
      	Locked:                0 kB
      
      2) It is slower than using a common zero page because each page fault
         has more work to do. Instead of just inserting a common zero page we
         have to allocate a page cache page, zero it, and then insert it. Here
         are the average latencies of dax_load_hole() as measured by ftrace on
         a random test box:
      
          Old method, using zeroed page cache pages:	3.4 us
          New method, using the common 4k zero page:	0.8 us
      
         This was the average latency over 1 GiB of sequential reads done by
         this simple fio script:
      
           [global]
           size=1G
           filename=/root/dax/data
           fallocate=none
           [io]
           rw=read
           ioengine=mmap
      
      3) The fact that we had to check for both DAX exceptional entries and
         for page cache pages in the radix tree made the DAX code more
         complex.
      
      Solve these issues by following the lead of the DAX PMD code and using a
      common 4k zero page instead.  As with the PMD code we will now insert a
      DAX exceptional entry into the radix tree instead of a struct page
      pointer which allows us to remove all the special casing in the DAX
      code.
      
      Note that we do still pretty aggressively check for regular pages in the
      DAX radix tree, especially where we take action based on the bits set in
      the page.  If we ever find a regular page in our radix tree now that
      most likely means that someone besides DAX is inserting pages (which has
      happened lots of times in the past), and we want to find that out early
      and fail loudly.
      
      This solution also removes the extra memory consumption.  Here is that
      same /proc/[pid]/smaps after 1GiB of reading from a hole with the new
      code:
      
      	7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12   /root/dax/data
      	Size:            1048576 kB
      	Rss:                   0 kB
      	Pss:                   0 kB
      	Shared_Clean:          0 kB
      	Shared_Dirty:          0 kB
      	Private_Clean:         0 kB
      	Private_Dirty:         0 kB
      	Referenced:            0 kB
      	Anonymous:             0 kB
      	LazyFree:              0 kB
      	AnonHugePages:         0 kB
      	ShmemPmdMapped:        0 kB
      	Shared_Hugetlb:        0 kB
      	Private_Hugetlb:       0 kB
      	Swap:                  0 kB
      	SwapPss:               0 kB
      	KernelPageSize:        4 kB
      	MMUPageSize:           4 kB
      	Locked:                0 kB
      
      Overall system memory consumption is similarly improved.
      
      Another major change is that we remove dax_pfn_mkwrite() from our fault
      flow, and instead rely on the page fault itself to make the PTE dirty
      and writeable.  The following description from the patch adding the
      vm_insert_mixed_mkwrite() call explains this a little more:
      
         "To be able to use the common 4k zero page in DAX we need to have our
          PTE fault path look more like our PMD fault path where a PTE entry
          can be marked as dirty and writeable as it is first inserted rather
          than waiting for a follow-up dax_pfn_mkwrite() =>
          finish_mkwrite_fault() call.
      
          Right now we can rely on having a dax_pfn_mkwrite() call because we
          can distinguish between these two cases in do_wp_page():
      
                  case 1: 4k zero page => writable DAX storage
                  case 2: read-only DAX storage => writeable DAX storage
      
          This distinction is made by via vm_normal_page(). vm_normal_page()
          returns false for the common 4k zero page, though, just as it does
          for DAX ptes. Instead of special casing the DAX + 4k zero page case
          we will simplify our DAX PTE page fault sequence so that it matches
          our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper.
          We will instead use dax_iomap_fault() to handle write-protection
          faults.
      
          This means that insert_pfn() needs to follow the lead of
          insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If
          'mkwrite' is set insert_pfn() will do the work that was previously
          done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path"
      
      Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
      Reviewed-by: NJan Kara <jack@suse.cz>
      Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
      Cc: "Theodore Ts'o" <tytso@mit.edu>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Andreas Dilger <adilger.kernel@dilger.ca>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Matthew Wilcox <mawilcox@microsoft.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      91d25ba8
  13. 05 9月, 2017 1 次提交
  14. 25 8月, 2017 2 次提交
  15. 06 8月, 2017 1 次提交
    • J
      ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize · fcf5ea10
      Jan Kara 提交于
      ext4_find_unwritten_pgoff() does not properly handle a situation when
      starting index is in the middle of a page and blocksize < pagesize. The
      following command shows the bug on filesystem with 1k blocksize:
      
        xfs_io -f -c "falloc 0 4k" \
                  -c "pwrite 1k 1k" \
                  -c "pwrite 3k 1k" \
                  -c "seek -a -r 0" foo
      
      In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048,
      SEEK_DATA) will return the correct result.
      
      Fix the problem by neglecting buffers in a page before starting offset.
      Reported-by: NAndreas Gruenbacher <agruenba@redhat.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: NJan Kara <jack@suse.cz>
      CC: stable@vger.kernel.org # 3.8+
      fcf5ea10
  16. 17 7月, 2017 1 次提交
    • D
      VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) · bc98a42c
      David Howells 提交于
      Firstly by applying the following with coccinelle's spatch:
      
      	@@ expression SB; @@
      	-SB->s_flags & MS_RDONLY
      	+sb_rdonly(SB)
      
      to effect the conversion to sb_rdonly(sb), then by applying:
      
      	@@ expression A, SB; @@
      	(
      	-(!sb_rdonly(SB)) && A
      	+!sb_rdonly(SB) && A
      	|
      	-A != (sb_rdonly(SB))
      	+A != sb_rdonly(SB)
      	|
      	-A == (sb_rdonly(SB))
      	+A == sb_rdonly(SB)
      	|
      	-!(sb_rdonly(SB))
      	+!sb_rdonly(SB)
      	|
      	-A && (sb_rdonly(SB))
      	+A && sb_rdonly(SB)
      	|
      	-A || (sb_rdonly(SB))
      	+A || sb_rdonly(SB)
      	|
      	-(sb_rdonly(SB)) != A
      	+sb_rdonly(SB) != A
      	|
      	-(sb_rdonly(SB)) == A
      	+sb_rdonly(SB) == A
      	|
      	-(sb_rdonly(SB)) && A
      	+sb_rdonly(SB) && A
      	|
      	-(sb_rdonly(SB)) || A
      	+sb_rdonly(SB) || A
      	)
      
      	@@ expression A, B, SB; @@
      	(
      	-(sb_rdonly(SB)) ? 1 : 0
      	+sb_rdonly(SB)
      	|
      	-(sb_rdonly(SB)) ? A : B
      	+sb_rdonly(SB) ? A : B
      	)
      
      to remove left over excess bracketage and finally by applying:
      
      	@@ expression A, SB; @@
      	(
      	-(A & MS_RDONLY) != sb_rdonly(SB)
      	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
      	|
      	-(A & MS_RDONLY) == sb_rdonly(SB)
      	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
      	)
      
      to make comparisons against the result of sb_rdonly() (which is a bool)
      work correctly.
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      bc98a42c
  17. 24 6月, 2017 1 次提交
  18. 20 6月, 2017 1 次提交
  19. 25 5月, 2017 1 次提交
    • E
      ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() · 624327f8
      Eryu Guan 提交于
      ext4_find_unwritten_pgoff() is used to search for offset of hole or
      data in page range [index, end] (both inclusive), and the max number
      of pages to search should be at least one, if end == index.
      Otherwise the only page is missed and no hole or data is found,
      which is not correct.
      
      When block size is smaller than page size, this can be demonstrated
      by preallocating a file with size smaller than page size and writing
      data to the last block. E.g. run this xfs_io command on a 1k block
      size ext4 on x86_64 host.
      
        # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
        	    -c "seek -d 0" /mnt/ext4/testfile
        wrote 1024/1024 bytes at offset 2048
        1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec)
        Whence  Result
        DATA    EOF
      
      Data at offset 2k was missed, and lseek(2) returned ENXIO.
      
      This is unconvered by generic/285 subtest 07 and 08 on ppc64 host,
      where pagesize is 64k. Because a recent change to generic/285
      reduced the preallocated file size to smaller than 64k.
      Signed-off-by: NEryu Guan <eguan@redhat.com>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      Reviewed-by: NJan Kara <jack@suse.cz>
      624327f8
  20. 22 5月, 2017 2 次提交
    • J
      ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff() · 3f1d5bad
      Jan Kara 提交于
      There is an off-by-one error in loop termination conditions in
      ext4_find_unwritten_pgoff() since 'end' may index a page beyond end of
      desired range if 'endoff' is page aligned. It doesn't have any visible
      effects but still it is good to fix it.
      Signed-off-by: NJan Kara <jack@suse.cz>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      3f1d5bad
    • J
      ext4: fix SEEK_HOLE · 7d95eddf
      Jan Kara 提交于
      Currently, SEEK_HOLE implementation in ext4 may both return that there's
      a hole at some offset although that offset already has data and skip
      some holes during a search for the next hole. The first problem is
      demostrated by:
      
      xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file
      wrote 57344/57344 bytes at offset 0
      56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec)
      Whence	Result
      HOLE	0
      
      Where we can see that SEEK_HOLE wrongly returned offset 0 as containing
      a hole although we have written data there. The second problem can be
      demonstrated by:
      
      xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k"
             -c "seek -h 0" file
      
      wrote 57344/57344 bytes at offset 0
      56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec)
      wrote 8192/8192 bytes at offset 131072
      8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec)
      Whence	Result
      HOLE	139264
      
      Where we can see that hole at offsets 56k..128k has been ignored by the
      SEEK_HOLE call.
      
      The underlying problem is in the ext4_find_unwritten_pgoff() which is
      just buggy. In some cases it fails to update returned offset when it
      finds a hole (when no pages are found or when the first found page has
      higher index than expected), in some cases conditions for detecting hole
      are just missing (we fail to detect a situation where indices of
      returned pages are not contiguous).
      
      Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page
      indices and also handle all cases where we got less pages then expected
      in one place and handle it properly there.
      
      CC: stable@vger.kernel.org
      Fixes: c8c0df24
      CC: Zheng Liu <wenqing.lz@taobao.com>
      Signed-off-by: NJan Kara <jack@suse.cz>
      Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      7d95eddf
  21. 13 5月, 2017 1 次提交
  22. 03 4月, 2017 1 次提交
    • D
      ext4: Add statx support · 99652ea5
      David Howells 提交于
      Return enhanced file attributes from the Ext4 filesystem.  This includes
      the following:
      
       (1) The inode creation time (i_crtime) as stx_btime, setting STATX_BTIME.
      
       (2) Certain FS_xxx_FL flags are mapped to stx_attribute flags.
      
      This requires that all ext4 inodes have a getattr call, not just some of
      them, so to this end, split the ext4_getattr() function and only call part
      of it where appropriate.
      
      Example output:
      
      	[root@andromeda ~]# touch foo
      	[root@andromeda ~]# chattr +ai foo
      	[root@andromeda ~]# /tmp/test-statx foo
      	statx(foo) = 0
      	results=fff
      	  Size: 0               Blocks: 0          IO Block: 4096    regular file
      	Device: 08:12           Inode: 2101950     Links: 1
      	Access: (0644/-rw-r--r--)  Uid:     0   Gid:     0
      	Access: 2016-02-11 17:08:29.031795451+0000
      	Modify: 2016-02-11 17:08:29.031795451+0000
      	Change: 2016-02-11 17:11:11.987790114+0000
      	 Birth: 2016-02-11 17:08:29.031795451+0000
      	Attributes: 0000000000000030 (-------- -------- -------- -------- -------- -------- -------- --ai----)
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      99652ea5
  23. 25 2月, 2017 3 次提交