Patch from Nicolas Pitre

This patch allows for assorted type of cleanups by letting assembly code
use the same set of defines for constant values and avoid duplicated
definitions that might not always be in sync, or that might simply be
confusing due to the different names for the same thing.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Kenneth Tan

Defining IXP46X peripheral devices memory mapping definitions that have
been missed out:
o Peripheral virtual base address is being adjusted to allow more headroom to add extra peripheral device addresses
o Peripheral size is being increased to address the above needs
o Virtual address of expansion bus and PCI configuration register needs to be adjusted as new peripheral device memory space is overlapping with their virtual address space
Signed-off-by: NKenneth Tan <chong.yin.tan@intel.com>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Fix XIP support after recent bootmem code refactoring.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Introduce ixp2000_reg_wrb, which is a variant of ixp2000_reg_write
that does a readback from the target register, to make sure that
the write has been flushed out of the write buffer.

Unlike the previous (ineffective) readback in ixp2000_reg_write, this
readback is followed by an instruction that depends on the value of
the readback so that the CPU actually stalls until the readback has
completed.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Turn ixp2000_reg_read into an inline function.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The workaround that we do for avoiding triggering ixp2400 erratum #66
involves mapping I/O pages using XCB=101 instead of XCB=000 so that we
prevent the I/O signal to the gasket from being asserted (which can
cause data corruption.)  But XCB=101 mappings are write-buffered while
mappings using XCB=000 are not, which is why if we use XCB=101 mappings
we do a readback for every CSR store in an attempt to make sure that
the store has been pushed out of the xscale core and the gasket.

Unfortunately, there are two issues with this:
- we do a readback for every CSR store, which is wrong, because the
  register we are writing to might have unwanted side-effects on read,
  for example, in the case of the scratchpad ring enqueue/dequeue
  registers; and
- the readback is totally ineffective in the way we currently do it,
  because we just issue a load but do not issue any instruction that
  depends on the return value of that load, so the xscale core does
  not wait for the load to complete before continuing.

See this linux-arm-kernel mailing list post for further information:
	http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2005-September/031314.html

This means that my ixp2400 boxes have been running for many months
without a working readback in ixp2000_reg_write, without any apparent
adverse effects.  Two of them have been running for a week now with
the actual readback deleted from ixp2000_reg_write, also without any
apparent ill effects.

So, because in its current form it does more harm than good, the
readback in ixp2000_reg_write should simply be killed, as the patch
below does.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Unfortunately, some devices forgot to reset the flash on reboot.
Arrange for the map driver to suspend & resume the flash to
ensure that it is in a sane state before rebooting.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This got dropped from the SA1100 flash driver a while back and
never added to the platform support file.  Add it back.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Allow SA1100 devices to pass the name of the flash device to the
SA1100 map driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We should not delete MTD partitions when we registered a MTD
device.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Macro arguments should _always_ be surrounded by parentheses
when used to prevent unexpected problems with operator precedence.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since the machine information structures are now static, the
compiler might optimise them away.  Mark them with
__attribute_used__ to prevent this occuring.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Thanks to Andrew for doing the hard work on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver comes from the gnokii project.
Was further cleaned up by me to match recent usb-serial core changes.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch to get the ELV FHZ1000 Home Automation control device to
work with Linux. The patch adds a new device ID to the ftdi_sio driver.
It is for kernel version 2.6.13.4.
Signed-off-by: NMartin Hagelin <martin.hagelin@home.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NKoen Kooi <koen@handhelds.org>

With CONFIG_PM=n:

drivers/built-in.o(.text+0x1098c): In function `hub_thread':
drivers/usb/core/hub.c:2673: undefined reference to `.dpm_runtime_resume'
drivers/built-in.o(.text+0x10998):drivers/usb/core/hub.c:2674: undefined reference to `.dpm_runtime_resume'

Please, never ever ever put extern decls into .c files.  Use the darn header
files :(

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With CONFIG_PM=n:

drivers/built-in.o(.text+0x2a69c): In function `ohci_hub_control':
drivers/usb/host/ohci-hub.c:539: undefined reference to `.usb_hcd_resume_root_hub'
drivers/built-in.o(.text+0x2b920): In function `ohci_irq':
drivers/usb/host/ohci-hcd.c:726: undefined reference to `.usb_hcd_resume_root_hub'

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as592) makes a few small improvements to the way device
strings are handled, and it fixes some bugs in a couple of other sysfs
attribute routines.  (Look at show_configuration_string() to see what I
mean.)
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as591) fixes a rather innocuous bug that has been around for
quite a long time: Virtual root hubs should have a maxpacket length of
64 for endpoint 0.  I didn't realize it was wrong until I started
looking through the endpoint attribute files.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as590) fixes up all the remaining places where usbcore can
use kzalloc rather than kmalloc/memset.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I can't stand text lines that wrap-around in my 80-column windows.  This
patch (as589) makes cosmetic changes to a couple of source files.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as588) fixes the way endpoint attribute files are registered
and unregistered.  Now they will correctly track along with altsetting
changes.  This fixes bugzilla entry #5467.

In a separate but related change, when a usb_reset_configuration call
fails, the device state is not changed to USB_STATE_ADDRESS.  In the
first place, failure means that we don't know what the state is, not
that we know the device is unconfigured.  In the second place, doing
this can potentially lead to a memory leak, since usbcore might not
realize there still is a current configuration that needs to be
destroyed.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This revised patch (as587b) improves the implementation of USB endpoint
sysfs files.  Instead of storing a whole bunch of attributes for every
single endpoint, each endpoint now gets its own kobject and they can
share a static list of attributes.  The number of extra fields added to
struct usb_host_endpoint has been reduced from 4 to 1.

The bEndpointAddress field is retained even though it is redundant (it
repeats the same information as the attributes' directory name).  The
code avoids calling kobject_register, to prevent generating unwanted
hotplug events.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Freecom seems to be one of those vendors that can't get the GET CAPACITY
thing right. This expands the US_FL_FIX_CAPACITY flag for the entire
range of their fccd product line.

This is based on a patch sent by Stuart Black
<stuart_black@yahoo.co.uk>.
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is originally from Alan Stern (as569).  It has been rediffed
against a current tree.

This patch converts usb-storage to use the kthread API for creating its
control and scanning threads.  The new code doesn't use kthread_stop
because the threads need (or will need in the future) to exit
asynchronously.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch from Alan Stern started as as568.  It has been rediffed against
a current tree.

This patch adds minimal suspend/resume support to usb-storage.  Just enough
for it to qualify as PM-aware.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is from Alan Stern (as560).  It has been rediffed against a
current tree.

This patch allocates a separate buffer for usb-storage to use when
auto-sensing.  Up to now we have been using the sense buffer embedded in a
scsi_cmnd struct, which is dangerous on hosts that (a) don't do
cache-coherent DMA or (b) have DMA alignment restrictions.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is originally from Alan Stern (as557).  It has been re-diffed
against a current tree, and I also corrected a minor merging error.

Some time ago we introduced a delay before device scanning, because many
devices do not like to receive SCSI commands right after enumeration.
Now it turns out there's a device that doesn't like to receive
Get-Max-LUN right after enumeration either.  Accordingly this patch
delays the Get-Max-LUN request until the beginning of the scanning
procedure.  This fixes Bugzilla entry #5010.

Three things are worth noting.  First, I removed the locking code from
usb_stor_acquire_resources.  It's not needed, because the locking is to
protect against disconnect events and acquire_resources is only called
during probe (so the disconnect routine can't be called).  Second, I
initialized to 0 the buffer used for the Get-Max-LUN response.  It's not
really necessary, but it will prevent random values from showing up in
the debugging log when the request fails.  Third, I added a test against
the SINGLE_LUN flag.  This will allow us to use the flag to indicate
Bulk-only devices that can't handle Get-Max-LUN.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as577) adds a Clear-Halt call on the Interrupt-in endpoint
during input device configuration.  Without it my HP USB keyboard doesn't
work.

Vojtech says it's worth trying, since it might help with some recalcitrant
devices.  On the other hand, it might interfere with others.  I'm
submitting it so that it can get tested by a range of users.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This revised patch (as586b) makes usb-handoff permanently true and no
longer a kernel boot parameter.  It also removes the piix3_usb quirk code;
that was nothing more than an early version of the USB handoff code
(written at a time when Intel's PIIX3 was about the only motherboard with
USB support).  And it adds identifiers for the three PCI USB controller
classes to pci_ids.h.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

another one to use kzalloc. Please apply.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch improving the set of vendor/product IDs used in the
"ipaq" USB serial device driver. The patch size is because I sorted the
ids this time, forgot about that last time.

Changes:

- Added vendor/product identifiers for Psion Teklogix devices
- Restored Microsoft's identifier pair 045e/00ce
- Sorted list of vendor/product identifiers
Signed-off-by: NDavid Eriksson <twogood@users.sourceforge.net>
Signed-off-by: NGanesh Varadarajan <ganesh@veritas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On some arch (like arm) udelay cannot be called with value greater that
2000.

Signed-off-by: Guillaume GOURAT / guillaume.gourat@nexvision.fr
Signed-off-by: NOliver Neukum <oliver@neukum.name>