- 07 2月, 2012 7 次提交
-
-
由 Johannes Berg 提交于
(based on Eliad's patch) Add a callback to notify the low-level driver whenever the state of a station changes. The driver is only notified when the station is actually in the mac80211 hash table, not for pre-insert state transitions. To allow the driver to replace sta_add/remove calls with this, call extra transitions with the NOTEXIST state. This callback can fail, so we need to be careful in handling it when a station is inserted, particularly in the IBSS case where we still keep the station entry around for mac80211 purposes. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This will be used by drivers later if they need to have stations inserted all the time, in mac80211 has no purpose, is never used and sta_state starts out in NONE. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
If a station couldn't be uploaded to the driver but is still kept (only in IBSS mode) we still shouldn't try to program the keys for it into hardware; fix this bug by skipping the key upload in this case. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Setting keys and updating TKIP keys must use the BSS sdata (not AP_VLAN), so we translate. Move the translation into driver-ops wrappers instead of having it inline in the code to simplify the normal code flow. The same can be done for sta_add/remove which already does the translation in the wrapper. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Move the station state modification right before insert, this just makes the current code more readable (you can tell that it's before insertion looking at a single screenful of code) right now, but some upcoming changes will require this. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
-
- 03 2月, 2012 29 次提交
-
-
由 Amit Beka 提交于
Added a check on the direct register access. Checks that the address is in the lower ragnge (0x0-0x2000), which belongs to CSR, HBUS and FH registers. Signed-off-by: NAmit Beka <amit.beka@intel.com> Signed-off-by: NWey-Yi W Guy <wey-yi.w.guy@intel.com>
-
由 Johannes Berg 提交于
smatch correctly complains: iwl-trans-pcie.c +1528 iwl_trans_pcie_start_hw(50) warn: 'trans->irq' was not released on error Fix it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi W Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
The routines dealing with the ucode are spread through several files. Move them all to the same file and create a iwl-ucode.h file with the ucode file definitions. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
There is nothing device specific in the initialization of the bcast_sta_id so move it to the common inititalization routine. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
change a comment to be a little more clear Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
The message was misleading when a queue is deactivated. The fifo number is irrelevant then, so don't print it. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This trans_ops->stop_hw leaves the RFKILL interrupt enabled, we can call that one instead of enable_rfkill_int. By that, we reduce the numbers of acceesses to the NIC from the upper layers. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
The HW revision is now read by the transport layer in its allocation. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Get this information from the transport layer. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Get this information from the transport layer. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Get this information from the transport layer which is now in charge of the APM too. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This handler was called from the transport layer only. Merge it to the transport's apm_init. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Now there is only one transport function that launch a specific fw: trans_ops->start_fw. This one replaces trans_ops->start_device and trans_ops->kick_nic. The code that actually loads the fw to the device has been moved to the transport specific code. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This is another clean up of the proble flow. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This handler stops the HW and puts it in low power state. It will allow to clean up the flows in the upper layers. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This is transport related Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Kill the trans_ops->prepare_card_hw which is now useless. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This handler will become thicker, reflect its real role now. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
This is transport related Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
From now on, the transport layer in charge of providing access to the device. So change all the driver to give a pointer to the transport to all the low level functions that actually access the device. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Most of the accesses to the registers are done from the transport layer. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
All the bus configuration is now done in the transport allocation fucntion. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Change the way we alloc the transport on the way. Since the transport is allocated from a bus specific area, we can give the bus specific parameters (i.e. pci_dev for PCI) to the transport. This will be useful when the bus layer will be killed. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Allocating the shrd area dynamically will allow more agility while revamping the flows. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
There is no link between the two. Ensure that the NIC is on outside the code of the EEPROM handling. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Gregory Greenman 提交于
This patch connects IDI transport to driver. It does so by using a number of ifdefs at this stage. IDI is a new transport that is under development. Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
Define a new handler in the transport layer API: fw_alive. Move iwl_reset_ict to this new handler, and move the content of tx_start to this handler. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into wireless-next
-
- 02 2月, 2012 3 次提交
-
-
由 Chilam Ng 提交于
ath6kl: initialize the 'nominal_phy' field in the 'wmi_create_pstream_cmd' struct for create_qos command The nominal_phy field is uninitialized. Initialize it to min_phy_rate for create_qos. kvalo: simplified the equation as checkpatch complained for a too long line Signed-off-by: NChilam Ng <chilamng@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
Both Luis and John reported that they see a compiler warning: drivers/net/wireless/ath/ath6kl/init.c: In function 'ath6kl_init_hw_params': drivers/net/wireless/ath/ath6kl/init.c:1377:26: warning: ‘hw’ may be used uninitialized in this function Oddly enough I have never seen it. But AFAICT the code is correct and hw is not used uninitalized so add uninitialized_var() to inform that to the compiler. Reported-by: NLuis R. Rodriguez <mcgrof@qca.qualcomm.com> Reported-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Masanari Iida 提交于
Correct spelling "spported" to "supported" in drivers/net/wireless/ath/ath6kl/cfg80211.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 01 2月, 2012 1 次提交
-