This makes ep93xx debug-ll handling more consistent with the other
platforms, by adding a separate Kconfig symbol for it that
in turn selects the standard DEBUG_UART_PL01X symbol.

We still have to pick a physical address even if DEBUG_LL is disabled
here, because the EP93xx uncompress output code uses
CONFIG_DEBUG_UART_PHYS. If we ever move to multiplatform support,
this can go away.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

As we are moving dove/mv78xx0/orion into multiplatform, the debug-ll
configuration options for these platforms are conflicting with the
multiplatform configuration: enabling one of those platforms sometimes
changes the default addresses to the ones used on one of them, rather
than the one that was selected in Kconfig.

This changes the configuration so we share the physical address
configuration with mach-mvebu.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

We may have multiple platforms enabled and also DEBUG_LL
configured for one of them. However if we enable ARCH_KEYSTONE,
we default to using 32-bit UART access independent of which
platform we are actually using, which can be confusing.

This changes the logic so the 32-bit default gets only
used by default if we actually configure the keystone
UART, as opposed to picking some other 8250 setting on
a kernel that has keystone support enabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Instead of having to add a new configuration option each time support for
new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now,
CONFIG_DEBUG_UART_VIRT is automatically computed.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

With Bock-W, the last legacy platform has been removed.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Nby: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add Kconfig entries, header file changes and addition to the documentation.
The early debug infrastructure is also added for easy development.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable low-level debug support for i.MX6UL by adding the
debug port definitions for the SoC.
Singed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

randconfig testing reveals that DEBUG_SET_MODULE_RONX needs to depend on
MMU otherwise these build errors are observed:

kernel/built-in.o: In function `set_section_ro_nx':
kernel/module.c:1738: undefined reference to `set_memory_nx'
kernel/built-in.o: In function `set_page_attributes':
kernel/module.c:1709: undefined reference to `set_memory_ro'

This is because the pageattr functions are not built for !MMU configs as
they don't have page tables.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add low level uart debug support for imx7d
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NBai Ping <b51503@freescale.com>
Signed-off-by: NAnson Huang <b20788@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

It's obviously pointless to dump page tables when the MMU is disabled,
and even trying to build this code results in numerous build errors
like these:

../arch/arm/mm/dump.c:56:11: error: 'L_PTE_USER' undeclared here (not in a function)
   .mask = L_PTE_USER,
           ^
../arch/arm/mm/dump.c:61:11: error: 'L_PTE_RDONLY' undeclared here (not in a function)
   .mask = L_PTE_RDONLY,
           ^
../arch/arm/mm/dump.c:66:11: error: 'L_PTE_XN' undeclared here (not in a function)
   .mask = L_PTE_XN,
           ^
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use the new config symbol ARM_SINGLE_ARMV7M which groups config
symbols used by modern ARMv7-M platforms. This allows supporting
multiple ARMv7-M platforms in one kernel image. However, a common
kernel image requires the combined platforms to share the same
main memory layout to be bootable.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NJoachim Eastwood <manabian@gmail.com>
Acked-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This introduces a new top level config symbol ARM_SINGLE_ARMV7M
for non-MMU, ARMv7-M platforms. It also support multiple ARMv7-M
platforms in one kernel image since the cores share the same
basic memory layout and interrupt controller. However, this works
only if the combined platforms also have a similar (main) memory
layout.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Using a dedicated symbol for low-level debugging instead of the
arch symbol will make this platform play nice when enabled on a
kernel that supports multiple platforms.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Use the UART0 peripheral for low level debug. Only the UART port 0 is
currently supported.
Signed-off-by: NJun Nie <jun.nie@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add support for NXP's LPC18xx (Cortex-M3) and LPC43xx (Cortex-M4)
SoCs. These SoCs are NXP's high preformance MCU line and can run at
clock speeds up to 180 MHz for LPC18xx and 204 MHz for LPC43xx.

LPC43xx is more or less a LPC18xx with a Cortex-M4F core and a few
extra peripherals. The LPC43xx series also features one or two
Cortex-M0 cores that can be used to offload the main M4 core.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add support for hardware uart1 for earlyprintk support on Arria10 devkit.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Keeping drivers related to HW tracing on ARM, i.e coresight,
under "drivers/coresight" doesn't make sense when other
architectures start rolling out technologies of the same
nature.

As such creating a new "drivers/hwtracing" directory where all
drivers of the same kind can reside, reducing namespace
pollution under "drivers/".
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Most CoreSight blocks are 64-bit ready.  As such move configuration
entries from "arch/arm/Kconfig.config" to the driver's subdirectory
and source the newly created Kconfig from architecture specific
Kconfig.debug files.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.

[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Alpine platform includes UART8250 that can be used for early prints.
Signed-off-by: NSaeed Bishara <saeed@annapurnalabs.com>
Signed-off-by: NTsahee Zidenberg <tsahee@annapurnalabs.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Remove the stray closing parenthesis in the config description for the
DEBUG_RCAR_GEN2_SCIF0 option.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Convert ARCH_SHMOBILE_LEGACY to make use of <debug/uncompress.h>
and remove the now unused <mach/uncompress.h>.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Remove support for the legacy Cortex-A8 based sh7372 SoC.

The Linux kernel still lacks DT bindings for the sh7372 INTC
interrupt controller so DT multiplatform support is not possibile.

Also, the sh7372 SoC never went into mass production anyway so to
aid migration to DT multiplatform simply get rid of sh7372 support.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Use the USART peripheral as UART for low level debug. Only the UA0 port is
currently supported.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NOlof Johansson <olof@lixom.net>

In order to remove SOC_SAM9xxx options, stop using HAVE_AT91_DBGUx.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The DEBUG_AT91_UART Kconfig option was forgotten when moving the
AT91 debug-macro.S file. Add it and use it for the at91.S compilation.
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add the support of Hisilicon HiP01 debug uart.
The uart of hip01 is 8250 compatible.
Signed-off-by: NWang Long <long.wanglong@huawei.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

When building a multi_v7_defconfig kernel it is not possible to configure
DEBUG_LL to use any serial device except a ARM Primecell PL01X, or more
accurately and worse, it is possible to configure a different serial
device but KConfig does not honour this request. In fact this also
overrides the user selection for some of the single platform kernels, for
example I don't think DEBUG_LL can be targeted at ICE or semihosted
supervisor for ARCH_VERSATILE.

This happens because DEBUG_UART_PL01X is automatically enabled by
some architectures and this means user decisions made regarding
the DEBUG_LL backend will be overridden. Problem is fixed by removing the
automatic enabling of this option.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On EP93XX uncompress.h uses CONFIG_DEBUG_UART_PHYS instead of a hard
coded serial port. This means the build breaks when DEBUG_LL
(and DEBUG_LL_UART_PL01X) is not enabled.

This is fixed by adding a new dependency.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT
which default to UART1 but allow a user to configure UART2 or UART3.
We also introduce symbolic names for the registers and flags.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NArnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The omap1's debug-macro.S is similar to the generic 8250 code. Compared to
the 8520 code the omap1 macro automatically determines what UART to use
based on breadcrumbs left by the bootloader and automatically copes with
the eccentric register layout on OMAP7XX.

This patch drops both these features and relies instead on the generic
8250 macros:

1. Dropping support for the bootloader breadcrumbs is identical to the
   way the migration was handled for OMAP2 (see 808b7e07...).

2. Support for OMAP7XX still exists but it must be configured by hand
   (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-omap@vger.kernel.org
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As part of the migration a couple of uart definitions have been copied
from of the platform specific header files.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Only a very small handful of platforms support DEBUG_LL_UART_NONE but it
lurks in the menus of every single platform config ready to break the
build. This is an especial problem for defconfig/oldconfig since it is
often selected by default.

This patch solves the problem by removing this option. Any platforms
still depending upon this option must be migrated.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The default value for DEBUG_CNS3xxx appears twice. This patch removes
the one with the wrong sort order.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch changes the description of the low-level-debug port. SoC mt8127 and
mt6592 have the same uart port and the same mapping. We just change the
description to add low-level-debug to mt6592.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

this patch adds UART0 and UART1 as LLUART port, as the new Atlas7
registers layout are different, it also refines some names of old
hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT
to define different base addresses for multiple ports.
Signed-off-by: NGuo Zeng <Guo.Zeng@csr.com>
Signed-off-by: NZhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Add another SoC address for apq8064 and use DEBUG_UART_VIRT
instead of DEBUG_UART_BASE because the former actually exists.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

Move debug-macro.S from include/mach/ to include/debug where all other common
debug macros are.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Marco will not be supported any more. it has been replaced by CSR
Atlas7.
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Some mvebu boards have the UART1 more easily accessible than the other UARTs
found on the system.

Add a debug_ll option for this case.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>