Instead of splitting refcount between (per-cpu) mnt_count
and (SMP-only) mnt_longrefs, make all references contribute
to mnt_count again and keep track of how many are longterm
ones.

Accounting rules for longterm count:
	* 1 for each fs_struct.root.mnt
	* 1 for each fs_struct.pwd.mnt
	* 1 for having non-NULL ->mnt_ns
	* decrement to 0 happens only under vfsmount lock exclusive

That allows nice common case for mntput() - since we can't drop the
final reference until after mnt_longterm has reached 0 due to the rules
above, mntput() can grab vfsmount lock shared and check mnt_longterm.
If it turns out to be non-zero (which is the common case), we know
that this is not the final mntput() and can just blindly decrement
percpu mnt_count.  Otherwise we grab vfsmount lock exclusive and
do usual decrement-and-check of percpu mnt_count.

For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm();
namespace.c uses the latter in places where we don't already hold
vfsmount lock exclusive and opencodes a few remaining spots where
we need to manipulate mnt_longterm.

Note that we mostly revert the code outside of fs/namespace.c back
to what we used to have; in particular, normal code doesn't need
to care about two kinds of references, etc.  And we get to keep
the optimization Nick's variant had bought us...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Expiry-related code calls umount_tree() several times with
the same list to collect vfsmounts to.  Which is fine, except
that umount_tree() implicitly assumed that the list would
be empty on each call - it moves the victims over there and
then iterates through the list kicking them out.  It's *almost*
idempotent, so everything nearly worked.  However, mnt->ghosts
handling (and thus expirability checks) had been broken - that
part was not idempotent...

The fix is trivial - use local temporary list, splice it to
the the collector list when we are through.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Merge the remaining autofs4 dentry ops tables.  It doesn't matter if
d_automount and d_manage are present on something that's not mountable or
holdable as these ops are only used if the appropriate flags are set in
dentry->d_flags.

[AV] switch to ->s_d_op, since now _everything_ on autofs4 is using the
same dentry_operations.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Unexport do_add_mount() and make ->d_automount() return the vfsmount to be
added rather than calling do_add_mount() itself.  follow_automount() will then
do the addition.

This slightly complicates things as ->d_automount() normally wants to add the
new vfsmount to an expiration list and start an expiration timer.  The problem
with that is that the vfsmount will be deleted if it has a refcount of 1 and
the timer will not repeat if the expiration list is empty.

To this end, we require the vfsmount to be returned from d_automount() with a
refcount of (at least) 2.  One of these refs will be dropped unconditionally.
In addition, follow_automount() must get a 3rd ref around the call to
do_add_mount() lest it eat a ref and return an error, leaving the mount we
have open to being expired as we would otherwise have only 1 ref on it.

d_automount() should also add the the vfsmount to the expiration list (by
calling mnt_set_expiry()) and start the expiration timer before returning, if
this mechanism is to be used.  The vfsmount will be unlinked from the
expiration list by follow_automount() if do_add_mount() fails.

This patch also fixes the call to do_add_mount() for AFS to propagate the mount
flags from the parent vfsmount.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Allow d_manage() to be called from pathwalk when it is in RCU-walk mode as well
as when it is in Ref-walk mode.  This permits __follow_mount_rcu() to call
d_manage() directly.  d_manage() needs a parameter to indicate that it is in
RCU-walk mode as it isn't allowed to sleep if in that mode (but should return
-ECHILD instead).

autofs4_d_manage() can then be set to retain RCU-walk mode if the daemon
accesses it and otherwise request dropping back to ref-walk mode.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove a further kludge from __do_follow_link() as it's no longer required with
the automount code.

This reverts the non-helper-function parts of
051d3812, which breaks union mounts.

Reported-by: vaurora@redhat.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Increase the autofs module sub-version so we can tell what kernel
implementation is being used from user space debug logging.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Version 4 of autofs provides a pseudo direct mount implementation
that relies on directories at the leaves of a directory tree under
an indirect mount to trigger mounts.

This patch adds support for that functionality.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It is possible for the check in wait.c:validate_request() to return
an incorrect result if the dentry that was mounted upon has changed
during the callback.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When this function is called the local reference count does't need to
be updated since the dentry is going away and dput definitely must
not be called here.

Also the autofs info struct field inode isn't used so remove it.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There are now two distinct dentry operations uses. One for dentrys
that trigger mounts and one for dentrys that do not.

Rationalize the use of these dentry operations and rename them to
reflect their function.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Since the use of ->follow_link() has been eliminated there is no
need to separate the indirect and direct inode operations.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove code that is not used due to the use of ->d_automount()
and ->d_manage().
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch required a previous patch to add the ->d_automount()
dentry operation.

Add a function to use the newly defined ->d_manage() dentry operation
for blocking during mount and expire.

Whether the VFS calls the dentry operations d_automount() and d_manage()
is controled by the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags. autofs
uses the d_automount() operation to callback to user space to request
mount operations and the d_manage() operation to block walks into mounts
that are under construction or destruction.

In order to prevent these functions from being called unnecessarily the
DMANAGED_* flags are cleared for cases which would cause this. In the
common case the DMANAGED_AUTOMOUNT and DMANAGED_TRANSIT flags are both
set for dentrys waiting to be mounted. The DMANAGED_TRANSIT flag is
cleared upon successful mount request completion and set during expire
runs, both during the dentry expire check, and if selected for expire,
is left set until a subsequent successful mount request completes.

The exception to this is the so-called rootless multi-mount which has
no actual mount at its base. In this case the DMANAGED_AUTOMOUNT flag
is cleared upon successful mount request completion as well and set
again after a successful expire.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a function to use the newly defined ->d_automount() dentry operation
for triggering mounts instead of doing the user space callback in ->lookup()
and ->d_revalidate().

Note, to be useful the subsequent patch to add the ->d_manage() dentry
operation is also needed so the discussion of functionality is deferred to
that patch.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove the automount through follow_link() kludge code from pathwalk in favour
of using d_automount().
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make CIFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.

[NOTE: THIS IS UNTESTED!]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make NFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make AFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add an AT_NO_AUTOMOUNT flag to suppress terminal automounting of automount
point directories.  This can be used by fstatat() users to permit the
gathering of attributes on an automount point and also prevent
mass-automounting of a directory of automount points by ls.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a dentry op (d_manage) to permit a filesystem to hold a process and make it
sleep when it tries to transit away from one of that filesystem's directories
during a pathwalk.  The operation is keyed off a new dentry flag
(DCACHE_MANAGE_TRANSIT).

The filesystem is allowed to be selective about which processes it holds and
which it permits to continue on or prohibits from transiting from each flagged
directory.  This will allow autofs to hold up client processes whilst letting
its userspace daemon through to maintain the directory or the stuff behind it
or mounted upon it.

The ->d_manage() dentry operation:

	int (*d_manage)(struct path *path, bool mounting_here);

takes a pointer to the directory about to be transited away from and a flag
indicating whether the transit is undertaken by do_add_mount() or
do_move_mount() skipping through a pile of filesystems mounted on a mountpoint.

It should return 0 if successful and to let the process continue on its way;
-EISDIR to prohibit the caller from skipping to overmounted filesystems or
automounting, and to use this directory; or some other error code to return to
the user.

->d_manage() is called with namespace_sem writelocked if mounting_here is true
and no other locks held, so it may sleep.  However, if mounting_here is true,
it may not initiate or wait for a mount or unmount upon the parameter
directory, even if the act is actually performed by userspace.

Within fs/namei.c, follow_managed() is extended to check with d_manage() first
on each managed directory, before transiting away from it or attempting to
automount upon it.

follow_down() is renamed follow_down_one() and should only be used where the
filesystem deliberately intends to avoid management steps (e.g. autofs).

A new follow_down() is added that incorporates the loop done by all other
callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS
and CIFS do use it, their use is removed by converting them to use
d_automount()).  The new follow_down() calls d_manage() as appropriate.  It
also takes an extra parameter to indicate if it is being called from mount code
(with namespace_sem writelocked) which it passes to d_manage().  follow_down()
ignores automount points so that it can be used to mount on them.

__follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with
DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to
sleep.  It would be possible to enter d_manage() in rcu-walk mode too, and have
that determine whether to abort or not itself.  That would allow the autofs
daemon to continue on in rcu-walk mode.

Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't
required as every tranist from that directory will cause d_manage() to be
invoked.  It can always be set again when necessary.

==========================
WHAT THIS MEANS FOR AUTOFS
==========================

Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to
trigger the automounting of indirect mounts, and both of these can be called
with i_mutex held.

autofs knows that the i_mutex will be held by the caller in lookup(), and so
can drop it before invoking the daemon - but this isn't so for d_revalidate(),
since the lock is only held on _some_ of the code paths that call it.  This
means that autofs can't risk dropping i_mutex from its d_revalidate() function
before it calls the daemon.

The bug could manifest itself as, for example, a process that's trying to
validate an automount dentry that gets made to wait because that dentry is
expired and needs cleaning up:

	mkdir         S ffffffff8014e05a     0 32580  24956
	Call Trace:
	 [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897
	 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58
	 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e
	 [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b
	 [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149
	 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f
	 [<ffffffff80057a2f>] lookup_create+0x46/0x80
	 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4

versus the automount daemon which wants to remove that dentry, but can't
because the normal process is holding the i_mutex lock:

	automount     D ffffffff8014e05a     0 32581      1              32561
	Call Trace:
	 [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b
	 [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1
	 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14
	 [<ffffffff800e6d55>] do_rmdir+0x77/0xde
	 [<ffffffff8005d229>] tracesys+0x71/0xe0
	 [<ffffffff8005d28d>] tracesys+0xd5/0xe0

which means that the system is deadlocked.

This patch allows autofs to hold up normal processes whilst the daemon goes
ahead and does things to the dentry tree behind the automouter point without
risking a deadlock as almost no locks are held in d_manage() and none in
d_automount().
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Was-Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a dentry op (d_automount) to handle automounting directories rather than
abusing the follow_link() inode operation.  The operation is keyed off a new
dentry flag (DCACHE_NEED_AUTOMOUNT).

This also makes it easier to add an AT_ flag to suppress terminal segment
automount during pathwalk and removes the need for the kludge code in the
pathwalk algorithm to handle directories with follow_link() semantics.

The ->d_automount() dentry operation:

	struct vfsmount *(*d_automount)(struct path *mountpoint);

takes a pointer to the directory to be mounted upon, which is expected to
provide sufficient data to determine what should be mounted.  If successful, it
should return the vfsmount struct it creates (which it should also have added
to the namespace using do_add_mount() or similar).  If there's a collision with
another automount attempt, NULL should be returned.  If the directory specified
by the parameter should be used directly rather than being mounted upon,
-EISDIR should be returned.  In any other case, an error code should be
returned.

The ->d_automount() operation is called with no locks held and may sleep.  At
this point the pathwalk algorithm will be in ref-walk mode.

Within fs/namei.c itself, a new pathwalk subroutine (follow_automount()) is
added to handle mountpoints.  It will return -EREMOTE if the automount flag was
set, but no d_automount() op was supplied, -ELOOP if we've encountered too many
symlinks or mountpoints, -EISDIR if the walk point should be used without
mounting and 0 if successful.  The path will be updated to point to the mounted
filesystem if a successful automount took place.

__follow_mount() is replaced by follow_managed() which is more generic
(especially with the patch that adds ->d_manage()).  This handles transits from
directories during pathwalk, including automounting and skipping over
mountpoints (and holding processes with the next patch).

__follow_mount_rcu() will jump out of RCU-walk mode if it encounters an
automount point with nothing mounted on it.

follow_dotdot*() does not handle automounts as you don't want to trigger them
whilst following "..".

I've also extracted the mount/don't-mount logic from autofs4 and included it
here.  It makes the mount go ahead anyway if someone calls open() or creat(),
tries to traverse the directory, tries to chdir/chroot/etc. into the directory,
or sticks a '/' on the end of the pathname.  If they do a stat(), however,
they'll only trigger the automount if they didn't also say O_NOFOLLOW.

I've also added an inode flag (S_AUTOMOUNT) so that filesystems can mark their
inodes as automount points.  This flag is automatically propagated to the
dentry as DCACHE_NEED_AUTOMOUNT by __d_instantiate().  This saves NFS and could
save AFS a private flag bit apiece, but is not strictly necessary.  It would be
preferable to do the propagation in d_set_d_op(), but that doesn't normally
have access to the inode.

[AV: fixed breakage in case if __follow_mount_rcu() fails and nameidata_drop_rcu()
succeeds in RCU case of do_lookup(); we need to fall through to non-RCU case after
that, rather than just returning with ungrabbed *path]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Was-Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

do_lookup() has a path leading from LOOKUP_RCU case to non-RCU
crossing of mountpoints, which breaks things badly.  If we
hit need_revalidate: and do nothing in there, we need to come
back into LOOKUP_RCU half of things, not to done: in non-RCU
one.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)

* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...

flush_scheduled_work() is going away.  afs needs to make sure all the
works it has queued have finished before being unloaded and there can
be arbitrary number of pending works.  Add afs_wq and use it as the
flush domain instead of the system workqueue.

Also, convert cancel_delayed_work() + flush_scheduled_work() to
cancel_delayed_work_sync() in afs_mntpt_kill_timer().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rxrpc_workqueue isn't depended upon while reclaiming memory.  Convert
to alloc_workqueue() without WQ_MEM_RECLAIM.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fscache_submit_exclusive_op() adds an operation to the pending list if
other operations are pending.  Fix the check for pending ops as n_ops
must be greater than 0 at the point it is checked as it is incremented
immediately before under lock.
Signed-off-by: NAkshat Aranya <aranya@nec-labs.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin

* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
  kernel: fix hlist_bl again
  cgroups: Fix a lockdep warning at cgroup removal
  fs: namei fix ->put_link on wrong inode in do_filp_open

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  mfd: ab8500-core chip version cut 2.0 support
  mfd: Flag WM831x /IRQ as a wake source
  mfd: Convert WM831x away from legacy I2C PM operations
  regulator: Support MAX8998/LP3974 DVS-GPIO
  mfd: Support LP3974 RTC
  i2c: Convert SCx200 driver from using raw PCI to platform device
  x86: OLPC: convert olpc-xo1 driver from pci device to platform device
  mfd: MAX8998/LP3974 hibernation support
  mfd/ab8500: remove spi support
  mfd: Remove ARCH_U8500 dependency from AB8500
  misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage
  mfd: Add __devexit annotation for vx855_remove
  mfd: twl6030 irq_data conversion.
  gpio: Fix cs5535 printk warnings
  misc: Fix cs5535 printk warnings
  mfd: Convert Wolfson MFD drivers to use irq_data accessor function
  mfd: Convert TWL4030 to new irq_ APIs
  mfd: Convert tps6586x driver to new irq_ API
  mfd: Convert tc6393xb driver to new irq_ APIs
  mfd: Convert t7166xb driver to new irq_ API
  ...

Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The PCI sysfs ROM interface requires an enabling write to access the ROM
image, but the default file mode is 0400.  The original proposed patch
adding sysfs ROM support was a true read-only interface, with the
enabling bit coming in as a feature request.  I suspect it was simply an
oversight that the file mode didn't get updated to match the API.
Acked-by: NChris Wright <chrisw@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This functionality is known to be incomplete, so discourage its use in
general-purpose kernels.

The only reason to use this driver is to support PCI hotplug on CNB20LE-
based machines that don't have ACPI, and there are very few such
systems.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The broadcom_bus.c quirk was written (without benefit of documentation)
to support PCI hotplug on an old system that doesn't have ACPI.  As
such, we should only use it when the system doesn't have ACPI.

If the system does have ACPI and we need the host bridge description, we
should get it from the ACPI _CRS method.  On machines older than 2008,
we currently ignore _CRS, but that doesn't mean we should use
broadcom_bus.c.  It means we should either (a) do what we've done in the
past and assume everything in the PCI gap is routed to bus 0 (so hotplug
may not work), or (b) arrange to use _CRS.  This patch does (a).

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109Acked-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.

References: https://bugzilla.kernel.org/show_bug.cgi?id=20232Reported-by: NOzan Caglayan <ozan@pardus.org.tr>
Tested-by: NOzan Caglayan <ozan@pardus.org.tr>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch enables pci=bfsort by default on future Dell systems.
It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort
accordingly.

Offset  Name    Length  Value   Description

04      Flags0  Word    Varies  Bits 9-10
                                - 10:9 = 00  Unknown
                                - 10:9 = 01  Breadth First
                                - 10:9 = 10  Depth First
                                - 10:9 = 11  Reserved

1. Any time pci=bfsort has to be enabled on a system, we need to add the
   model number of the system to the white list. With this patch, that
   is not required.

2. Typically, model number has to be added to the white list when the
   system is under development. With this change, that is not required.
Signed-off-by: NJordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: NNarendra K <narendra_k@dell.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] MAINTAINERS: Update zcrypt driver entry
  [S390] Randomize PIEs
  [S390] Randomise the brk region
  [S390] Add is_32bit_task() helper function
  [S390] Randomize lower bits of stack address
  [S390] Randomize mmap start address
  [S390] Rearrange mmap.c
  [S390] Enable flexible mmap layout for 64 bit processes
  [S390] vdso: dont map at mmap_base
  [S390] reduce miminum gap between stack and mmap_base
  [S390] mmap: consider stack address randomization
  [S390] Update default configuration
  [S390] cio: path_event overindication after resume

Commit a1f5f22a ("gpio: timbgpio:
irq_data conversion") was slightly too enthusiastic in converting
timbgpio_irq() over to take an irq_data * argument instead of an
unsigned int irq argument, as it is a flow handler, which still take
IRQ numbers for now.  (And on top of that, it was using the wrong
accessors.)

This fixes it up, and seems to build without warnings.
Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Richard Röjfors <richard.rojfors@mocean-labs.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cgroup can't use simple_lookup(), since that'd override its desired ->d_op.
Tested-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>