- 12 5月, 2018 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs由 David S. Miller 提交于
David Howells says: ==================== rxrpc: Fixes Here are three fixes for AF_RXRPC and two tracepoints that were useful for finding them: (1) Fix missing start of expect-Rx-by timeout on initial packet transmission so that calls will time out if the peer doesn't respond. (2) Fix error reception on AF_INET6 sockets by using the correct family of sockopts on the UDP transport socket. (3) Fix setting the minimum security level on kernel calls so that they can be encrypted. (4) Add a tracepoint to log ICMP/ICMP6 and other error reports from the transport socket. (5) Add a tracepoint to log UDP sendmsg failure so that we can find out if transmission failure occurred on the UDP socket. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roman Mashak 提交于
When application fails to pass flags in netlink TLV for a new skbedit action, the kernel results in the following oops: [ 8.307732] BUG: unable to handle kernel paging request at 0000000000021130 [ 8.309167] PGD 80000000193d1067 P4D 80000000193d1067 PUD 180e0067 PMD 0 [ 8.310595] Oops: 0000 [#1] SMP PTI [ 8.311334] Modules linked in: kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper serio_raw [ 8.314190] CPU: 1 PID: 397 Comm: tc Not tainted 4.17.0-rc3+ #357 [ 8.315252] RIP: 0010:__tcf_idr_release+0x33/0x140 [ 8.316203] RSP: 0018:ffffa0718038f840 EFLAGS: 00010246 [ 8.317123] RAX: 0000000000000001 RBX: 0000000000021100 RCX: 0000000000000000 [ 8.319831] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000021100 [ 8.321181] RBP: 0000000000000000 R08: 000000000004adf8 R09: 0000000000000122 [ 8.322645] R10: 0000000000000000 R11: ffffffff9e5b01ed R12: 0000000000000000 [ 8.324157] R13: ffffffff9e0d3cc0 R14: 0000000000000000 R15: 0000000000000000 [ 8.325590] FS: 00007f591292e700(0000) GS:ffff8fcf5bc40000(0000) knlGS:0000000000000000 [ 8.327001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.327987] CR2: 0000000000021130 CR3: 00000000180e6004 CR4: 00000000001606a0 [ 8.329289] Call Trace: [ 8.329735] tcf_skbedit_init+0xa7/0xb0 [ 8.330423] tcf_action_init_1+0x362/0x410 [ 8.331139] ? try_to_wake_up+0x44/0x430 [ 8.331817] tcf_action_init+0x103/0x190 [ 8.332511] tc_ctl_action+0x11a/0x220 [ 8.333174] rtnetlink_rcv_msg+0x23d/0x2e0 [ 8.333902] ? _cond_resched+0x16/0x40 [ 8.334569] ? __kmalloc_node_track_caller+0x5b/0x2c0 [ 8.335440] ? rtnl_calcit.isra.31+0xf0/0xf0 [ 8.336178] netlink_rcv_skb+0xdb/0x110 [ 8.336855] netlink_unicast+0x167/0x220 [ 8.337550] netlink_sendmsg+0x2a7/0x390 [ 8.338258] sock_sendmsg+0x30/0x40 [ 8.338865] ___sys_sendmsg+0x2c5/0x2e0 [ 8.339531] ? pagecache_get_page+0x27/0x210 [ 8.340271] ? filemap_fault+0xa2/0x630 [ 8.340943] ? page_add_file_rmap+0x108/0x200 [ 8.341732] ? alloc_set_pte+0x2aa/0x530 [ 8.342573] ? finish_fault+0x4e/0x70 [ 8.343332] ? __handle_mm_fault+0xbc1/0x10d0 [ 8.344337] ? __sys_sendmsg+0x53/0x80 [ 8.345040] __sys_sendmsg+0x53/0x80 [ 8.345678] do_syscall_64+0x4f/0x100 [ 8.346339] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8.347206] RIP: 0033:0x7f591191da67 [ 8.347831] RSP: 002b:00007fff745abd48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 8.349179] RAX: ffffffffffffffda RBX: 00007fff745abe70 RCX: 00007f591191da67 [ 8.350431] RDX: 0000000000000000 RSI: 00007fff745abdc0 RDI: 0000000000000003 [ 8.351659] RBP: 000000005af35251 R08: 0000000000000001 R09: 0000000000000000 [ 8.352922] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000 [ 8.354183] R13: 00007fff745afed0 R14: 0000000000000001 R15: 00000000006767c0 [ 8.355400] Code: 41 89 d4 53 89 f5 48 89 fb e8 aa 20 fd ff 85 c0 0f 84 ed 00 00 00 48 85 db 0f 84 cf 00 00 00 40 84 ed 0f 85 cd 00 00 00 45 84 e4 <8b> 53 30 74 0d 85 d2 b8 ff ff ff ff 0f 8f b3 00 00 00 8b 43 2c [ 8.358699] RIP: __tcf_idr_release+0x33/0x140 RSP: ffffa0718038f840 [ 8.359770] CR2: 0000000000021130 [ 8.360438] ---[ end trace 60c66be45dfc14f0 ]--- The caller calls action's ->init() and passes pointer to "struct tc_action *a", which later may be initialized to point at the existing action, otherwise "struct tc_action *a" is still invalid, and therefore dereferencing it is an error as happens in tcf_idr_release, where refcnt is decremented. So in case of missing flags tcf_idr_release must be called only for existing actions. v2: - prepare patch for net tree Fixes: 5e1567ae ("net sched: skbedit action fix late binding") Signed-off-by: NRoman Mashak <mrv@mojatatu.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-05-10 the following series includes some fixes for mlx5 core driver. Please pull and let me know if there's any problem. For -stable v4.5 ("net/mlx5: E-Switch, Include VF RDMA stats in vport statistics") For -stable v4.10 ("net/mlx5e: Err if asked to offload TC match on frag being first") ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Ignatov 提交于
Fix more memory leaks in ip_cmsg_send() callers. Part of them were fixed earlier in 91948309. * udp_sendmsg one was there since the beginning when linux sources were first added to git; * ping_v4_sendmsg one was copy/pasted in c319b4d7. Whenever return happens in udp_sendmsg() or ping_v4_sendmsg() IP options have to be freed if they were allocated previously. Add label so that future callers (if any) can use it instead of kfree() before return that is easy to forget. Fixes: c319b4d7 (net: ipv4: add IPPROTO_ICMP socket kind) Signed-off-by: NAndrey Ignatov <rdna@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2018 35 次提交
-
-
由 Christophe JAILLET 提交于
Resources are not freed in the reverse order of the allocation. Labels are also mixed-up. Fix it and reorder code and labels in the error handling path of 'mlxsw_core_bus_device_register()' Fixes: ef3116e5 ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Debabrata Banerjee says: ==================== bonding: bug fixes and regressions Fixes to bonding driver for balance-alb mode, suitable for stable. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Debabrata Banerjee 提交于
There was a regression at some point from the intended functionality of commit f60c3704 ("bonding: Fix alb mode to only use first level vlans.") Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent. In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan. Signed-off-by: NDebabrata Banerjee <dbanerje@akamai.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Debabrata Banerjee 提交于
Make sure multicast, broadcast, and zero mac's cannot be the output of rlb updates, which should all be directed arps. Receive load balancing will be collapsed if any of these happen, as the switch will broadcast. Signed-off-by: NDebabrata Banerjee <dbanerje@akamai.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roi Dayan 提交于
The HW doesn't support matching on frag first/later, return error if we are asked to offload that. Fixes: 3f7d0eb4 ("net/mlx5e: Offload TC matching on packets being IP fragments") Signed-off-by: NRoi Dayan <roid@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Adi Nissim 提交于
The host side reporting of VF vport statistics didn't include the VF RDMA traffic. Fixes: 3b751a2a ("net/mlx5: E-Switch, Introduce get vf statistics") Signed-off-by: NAdi Nissim <adin@mellanox.com> Reported-by: NAriel Almog <ariela@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Daniel Jurgens 提交于
Some platforms require IRQs to be free'd in the shutdown path. Otherwise they will fail to be reallocated after a kexec. Fixes: 8812c24d ("net/mlx5: Add fast unload support in shutdown flow") Signed-off-by: NDaniel Jurgens <danielj@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 David Howells 提交于
Add a tracepoint to log transmission failure from the UDP transport socket being used by AF_RXRPC. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Fix the kernel call initiation to set the minimum security level for kernel initiated calls (such as from kAFS) from the sockopt value. Fixes: 19ffa01c ("rxrpc: Use structs to hold connection params and protocol info") Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
AF_RXRPC tries to turn on IP_RECVERR and IP_MTU_DISCOVER on the UDP socket it just opened for communications with the outside world, regardless of the type of socket. Unfortunately, this doesn't work with an AF_INET6 socket. Fix this by turning on IPV6_RECVERR and IPV6_MTU_DISCOVER instead if the socket is of the AF_INET6 family. Without this, kAFS server and address rotation doesn't work correctly because the algorithm doesn't detect received network errors. Fixes: 75b54cb5 ("rxrpc: Add IPv6 support") Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
The expect_rx_by call timeout is supposed to be set when a call is started to indicate that we need to receive a packet by that point. This is currently put back every time we receive a packet, but it isn't started when we first send a packet. Without this, the call may wait forever if the server doesn't deign to reply. Fix this by setting the timeout upon a successful UDP sendmsg call for the first DATA packet. The timeout is initiated only for initial transmission and not for subsequent retries as we don't want the retry mechanism to extend the timeout indefinitely. Fixes: a158bdd3 ("rxrpc: Fix call timeouts") Reported-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.17-20180510' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request for net/master consisting of 2 patches. Both patches are from Lukas Wunner and fix two problems found in the hi311x CAN driver under high load situations. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in DP_VERBOSE message text Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
In Commit 1f45f78f ("sctp: allow GSO frags to access the chunk too"), it held the chunk in sctp_ulpevent_make_rcvmsg to access it safely later in recvmsg. However, it also added sctp_chunk_put in fail_mark err path, which is only triggered before holding the chunk. syzbot reported a use-after-free crash happened on this err path, where it shouldn't call sctp_chunk_put. This patch simply removes this call. Fixes: 1f45f78f ("sctp: allow GSO frags to access the chunk too") Reported-by: syzbot+141d898c5f24489db4aa@syzkaller.appspotmail.com Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe JAILLET 提交于
If an error occurs, 'mlx4_en_destroy_netdev()' is called. It then calls 'mlx4_en_free_resources()' which does the needed resources cleanup. So, doing some explicit kfree in the error handling path would lead to some double kfree. Simplify code to avoid such a case. Fixes: 67f8b1dc ("net/mlx4_en: Refactor the XDP forwarding rings scheme") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The hyper-v transparent bonding should have used master_dev_link. The netvsc device should look like a master bond device not like the upper side of a tunnel. This makes the semantics the same so that userspace applications looking at network devices see the correct master relationshipship. Fixes: 0c195567 ("netvsc: transparent VF management") Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2018-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We only have a few fixes this time: * WMM element validation * SAE timeout * add-BA timeout * docbook parsing * a few memory leaks in error paths ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
sysbot/KMSAN reported an uninit-value in recvmsg() that I tracked down to tipc_sk_set_orig_addr(), missing srcaddr->member.scope initialization. This patches moves srcaddr->sock.scope init to follow fields order and ease future verifications. BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:226 CPU: 0 PID: 4549 Comm: syz-executor287 Not tainted 4.17.0-rc3+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:226 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2285 __sys_recvmsg net/socket.c:2328 [inline] __do_sys_recvmsg net/socket.c:2338 [inline] __se_sys_recvmsg net/socket.c:2335 [inline] __x64_sys_recvmsg+0x325/0x460 net/socket.c:2335 do_syscall_64+0x154/0x220 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4455e9 RSP: 002b:00007fe3bd36ddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 00000000004455e9 RDX: 0000000000002002 RSI: 0000000020000400 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff98ce4b6f R14: 00007fe3bd36e9c0 R15: 0000000000000003 Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xd5/0x810 net/socket.c:2246 __sys_recvmsg net/socket.c:2328 [inline] __do_sys_recvmsg net/socket.c:2338 [inline] __se_sys_recvmsg net/socket.c:2335 [inline] __x64_sys_recvmsg+0x325/0x460 net/socket.c:2335 Byte 19 of 32 is uninitialized Fixes: 31c82a2d ("tipc: add second source address to recvmsg()/recvfrom()") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
- correct a typo in the value of 'matchPattern' of test 282d, potentially causing false negative - allow errors when 'teardown' executes '$TC action flush action bpf' in test 282d, to fix false positive when it is run with act_bpf unloaded - correct the value of 'matchPattern' in test e939, causing false positive in case the BPF JIT is enabled Fixes: 440ea4ae ("tc-testing: add selftests for 'bpf' action") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NLucas Bates <lucasb@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Moshe Shemesh 提交于
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx4 modify cq limits the coalescing time parameter and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Change type of sample-interval and adaptive_rx_coal parameters in mlx4 driver to u32 as the ethtool holds them as u32 and these parameters are not limited due to mlx4 HW. Fixes: c27a02cd ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
copy mbox size to adapter instances of PF0-3 to avoid mbox log overflow. This fixes the possible protection fault. Fixes: baf50868 ("cxgb4: restructure VF mgmt code") Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ganesh Goudar 提交于
firmware expects HMA memory to be zeroed, use __GFP_ZERO for HMA memory allocation. Fixes: 8b4e6b3c ("cxgb4: Add HMA support") Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
Damir reported a breakage of SO_BINDTODEVICE for UDP sockets. In absence of VRF devices, after commit fb74c277 ("net: ipv4: add second dif to udp socket lookups") the dif mismatch isn't fatal anymore for UDP socket lookup with non null sk_bound_dev_if, breaking SO_BINDTODEVICE semantics. This changeset addresses the issue making the dif match mandatory again in the above scenario. Reported-by: NDamir Mansurov <dnman@oktetlabs.ru> Fixes: fb74c277 ("net: ipv4: add second dif to udp socket lookups") Fixes: 1801b570 ("net: ipv6: add second dif to udp socket lookups") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
After route cache is flushed via ipv4_sysctl_rtcache_flush(), we forget to reset fnhe_mtu_locked in rt_bind_exception(). When pmtu is updated in __ip_rt_update_pmtu(), it will return directly since the pmtu is still locked. e.g. + ip netns exec client ping 10.10.1.1 -c 1 -s 1400 -M do PING 10.10.1.1 (10.10.1.1) 1400(1428) bytes of data. >From 10.10.0.254 icmp_seq=1 Frag needed and DF set (mtu = 0) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mohammed Gamal 提交于
On older windows hosts the net_device instance is returned to the caller of rndis_filter_device_add() without having the presence bit set first. This would cause any subsequent calls to network device operations (e.g. MTU change, channel change) to fail after the device is detached once, returning -ENODEV. Instead of returning the device instabce, we take the exit path where we call netif_device_attach() Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Signed-off-by: NMohammed Gamal <mgamal@redhat.com> Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Since commit 29a5dcae ("nfp: flower: offload phys port MTU change") we take encapsulation headroom into account when calculating the max allowed MTU. This is unnecessary as the max MTU advertised by firmware should have already accounted for encap headroom. Subtracting headroom twice brings the max MTU below what's necessary for some deployments. Fixes: 29a5dcae ("nfp: flower: offload phys port MTU change") Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJohn Hurley <john.hurley@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in dev_warn message text Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in error string Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in res_strings string array Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michal Kalderon says: ==================== qed*: Rdma fixes This patch series include two fixes for bugs related to rdma. The first has to do with loading the driver over an iWARP device. The second fixes a previous commit that added proper link indication for iWARP / RoCE. ==================== Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NSudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
-
由 Michal Kalderon 提交于
A previous commit 4609adc2 ("qede: Fix qedr link update") added a flow that could allocate rdma event objects from an interrupt path (link notification). Therefore the kzalloc call should be done with GFP_ATOMIC. fixes: 4609adc2 ("qede: Fix qedr link update") Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NSudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Kalderon 提交于
If qede driver was loaded on a device configured for iWARP the l2 mutex wouldn't be allocated, and some l2 related resources wouldn't be freed. fixes: c851a9dc ("qed: Introduce iWARP personality") Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NSudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lukas Wunner 提交于
When sending packets as fast as possible using "cangen -g 0 -i -x", the HI-3110 occasionally latches the interrupt pin high on completion of a packet, but doesn't set the TXCPLT bit in the INTF register. The INTF register contains 0x00 as if no interrupt has occurred. Even waiting for a few milliseconds after the interrupt doesn't help. Work around this apparent erratum by instead checking the TXMTY bit in the STATF register ("TX FIFO empty"). We know that we've queued up a packet for transmission if priv->tx_len is nonzero. If the TX FIFO is empty, transmission of that packet must have completed. Note that this is congruent with our handling of received packets, which likewise gleans from the STATF register whether a packet is waiting in the RX FIFO, instead of looking at the INTF register. Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: NLukas Wunner <lukas@wunner.de> Acked-by: NAkshay Bhat <akshay.bhat@timesys.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Lukas Wunner 提交于
hi3110_get_berr_counter() may run concurrently to the rest of the driver but neglects to acquire the lock protecting access to the SPI device. As a result, it and the rest of the driver may clobber each other's tx and rx buffers. We became aware of this issue because transmission of packets with "cangen -g 0 -i -x" frequently hung. It turns out that agetty executes ->do_get_berr_counter every few seconds via the following call stack: CPU: 2 PID: 1605 Comm: agetty [<7f3f7500>] (hi3110_get_berr_counter [hi311x]) [<7f130204>] (can_fill_info [can_dev]) [<80693bc0>] (rtnl_fill_ifinfo) [<806949ec>] (rtnl_dump_ifinfo) [<806b4834>] (netlink_dump) [<806b4bc8>] (netlink_recvmsg) [<8065f180>] (sock_recvmsg) [<80660f90>] (___sys_recvmsg) [<80661e7c>] (__sys_recvmsg) [<80661ec0>] (SyS_recvmsg) [<80108b20>] (ret_fast_syscall+0x0/0x1c) agetty listens to netlink messages in order to update the login prompt when IP addresses change (if /etc/issue contains \4 or \6 escape codes): https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/?id=e36deb6424e8 It's a useful feature, though it seems questionable that it causes CAN bit error statistics to be queried. Be that as it may, if hi3110_get_berr_counter() is invoked while a frame is sent by hi3110_hw_tx(), bogus SPI transfers like the following may occur: => 12 00 (hi3110_get_berr_counter() wanted to transmit EC 00 to query the transmit error counter, but the first byte was overwritten by hi3110_hw_tx_frame()) => EA 00 3E 80 01 FB (hi3110_hw_tx_frame() wanted to transmit a frame, but the first byte was overwritten by hi3110_get_berr_counter() because it wanted to query the receive error counter) This sequence hangs the transmission because the driver believes it has sent a frame and waits for the interrupt signaling completion, but in reality the chip has never sent away the frame since the commands it received were malformed. Fix by acquiring the SPI lock in hi3110_get_berr_counter(). I've scrutinized the entire driver for further unlocked SPI accesses but found no others. Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Cc: Stef Walter <stefw@redhat.com> Cc: Karel Zak <kzak@redhat.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: NLukas Wunner <lukas@wunner.de> Reviewed-by: NAkshay Bhat <akshay.bhat@timesys.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
- 10 5月, 2018 1 次提交
-
-
由 Ying Xue 提交于
When we get link properties through netlink interface with tipc_nl_node_get_link(), we don't validate TIPC_NLA_LINK_NAME attribute at all, instead we directly use it. As a consequence, KMSAN detected the TIPC_NLA_LINK_NAME attribute was an uninitialized value, and then posted the following complaint: ================================================================== BUG: KMSAN: uninit-value in strcmp+0xf7/0x160 lib/string.c:329 CPU: 1 PID: 4527 Comm: syz-executor655 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 strcmp+0xf7/0x160 lib/string.c:329 tipc_nl_node_get_link+0x220/0x6f0 net/tipc/node.c:1881 genl_family_rcv_msg net/netlink/genetlink.c:599 [inline] genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447 genl_rcv+0x63/0x80 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x445589 RSP: 002b:00007fb7ee66cdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac24 RCX: 0000000000445589 RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffa2bf3f3f R14: 00007fb7ee66d9c0 R15: 0000000000000001 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline] netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== To quiet the complaint, TIPC_NLA_LINK_NAME attribute has been validated in tipc_nl_node_get_link() before it's used. Reported-by: syzbot+df0257c92ffd4fcc58cd@syzkaller.appspotmail.com Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-