According to the bluetooth HID spec v1.0 chapter 7.4.2

"This code requests a major state change in a BT-HID device.  A HID_CONTROL
request does not generate a HANDSHAKE response."

"A HID_CONTROL packet with a parameter of VIRTUAL_CABLE_UNPLUG is the only
HID_CONTROL packet a device can send to a host.  A host will ignore all other
packets."

So in the hidp_precess_hid_control function, we just need to deal with the
UNLUG packet.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If SCTP-AUTH is enabled, received AUTH chunk with BAD shared key 
identifier will cause kernel panic.

Test as following:
step1: enabled /proc/sys/net/sctp/auth_enable
step 2:  connect  to SCTP server with auth capable. Association is 
established between endpoints. Then send a AUTH chunk with a bad 
shareid, SCTP server will kernel panic after received that AUTH chunk.

SCTP client                   SCTP server
  INIT         ---------->  
    (with auth capable)
               <----------    INIT-ACK
                              (with auth capable)
  COOKIE-ECHO  ---------->
               <----------    COOKIE-ACK
  AUTH         ---------->


AUTH chunk is like this:
  AUTH chunk
    Chunk type: AUTH (15)
    Chunk flags: 0x00
    Chunk length: 28
    Shared key identifier: 10
    HMAC identifier: SHA-1 (1)
    HMAC: 0000000000000000000000000000000000000000

The assignment of NULL to key can safely be removed, since key_for_each 
(which is just list_for_each_entry under the covers does an initial 
assignment to key anyway).

If the endpoint_shared_keys list is empty, or if the key_id being 
requested does not exist, the function as it currently stands returns 
the actuall list_head (in this case endpoint_shared_keys.  Since that 
list_head isn't surrounded by an actuall data structure, the last 
iteration through list_for_each_entry will do a container_of on key, and 
we wind up returning a bogus pointer, instead of NULL, as we should.

> Neil Horman wrote:
>> On Tue, Jan 22, 2008 at 05:29:20PM +0900, Wei Yongjun wrote:
>>
>> FWIW, Ack from me.  The assignment of NULL to key can safely be 
>> removed, since
>> key_for_each (which is just list_for_each_entry under the covers does 
>> an initial
>> assignment to key anyway).
>> If the endpoint_shared_keys list is empty, or if the key_id being 
>> requested does
>> not exist, the function as it currently stands returns the actuall 
>> list_head (in
>> this case endpoint_shared_keys.  Since that list_head isn't 
>> surrounded by an
>> actuall data structure, the last iteration through 
>> list_for_each_entry will do a
>> container_of on key, and we wind up returning a bogus pointer, 
>> instead of NULL,
>> as we should.  Wei's patch corrects that.
>>
>> Regards
>> Neil
>>
>> Acked-by: Neil Horman <nhorman@tuxdriver.com>
>>
>
> Yep, the patch is correct.
>
> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
>
> -vlad
>
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If STCP is started while /proc/sys/net/sctp/auth_enable is set 0 and
association is established between endpoints. Then if
/proc/sys/net/sctp/auth_enable is set 1, a received AUTH chunk will
cause kernel panic.

Test as following:
step 1: echo 0> /proc/sys/net/sctp/auth_enable
step 2:

   SCTP client                  SCTP server
      INIT          --------->
                    <---------   INIT-ACK
      COOKIE-ECHO   --------->
                    <---------   COOKIE-ACK
step 3:
    echo 1> /proc/sys/net/sctp/auth_enable
step 4:
   SCTP client                  SCTP server
       AUTH        ----------->  Kernel Panic


This patch fix this probleam to treat AUTH chunk as unknow chunk if peer 
has initialized with no auth capable.

> Sorry for the delay.  Was on vacation without net access.
>
> Wei Yongjun wrote:
>>
>>
>> This patch fix this probleam to treat AUTH chunk as unknow chunk if 
>> peer has initialized with no auth capable.
>>
>> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
>
> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
>
>>
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The line in the /proc/net/fib_trie for route with TOS specified
- has extra \n at the end
- does not have a space after route scope
like below.
           |-- 1.1.1.1
              /32 universe UNICASTtos =1
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 2.6 latest git build was broken when using the following
configuration options:
CONFIG_NET_EMATCH=n
CONFIG_NET_CLS_FLOW=y

with the following error:
net/sched/cls_flow.c: In function 'flow_dump':
net/sched/cls_flow.c:598: error: 'struct tcf_ematch_tree' has no
member named 'hdr'
make[2]: *** [net/sched/cls_flow.o] Error 1
make[1]: *** [net/sched] Error 2
make: *** [net] Error 2


see the recent post by Li Zefan:
  http://www.spinics.net/lists/netdev/msg54434.html

The reason for this crash is that struct tcf_ematch_tree
(net/pkt_cls.h) is empty when CONFIG_NET_EMATCH is not defined.

When CONFIG_NET_EMATCH is defined, the tcf_ematch_tree structure
indeed holds a struct tcf_ematch_tree_hdr (hdr) as flow_dump()
expects.

This patch adds #ifdef CONFIG_NET_EMATCH in flow_dump to avoid this.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A bug every C programmer makes at some point in time...
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems that virtio_net wants to disable callbacks (interrupts) before
calling netif_rx_schedule(), so we can't use the return value to do so.

Rename "restart" to "cb_enable" and introduce "cb_disable" hook: callback
now returns void, rather than a boolean.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Previously we used a type/len pair within the config space, but this
seems overkill.  We now simply define a structure which represents the
layout in the config space: the config space can now only be extended
at the end.

The main driver-visible changes:
1) We indicate what fields are present with an explicit feature bit.
2) Virtqueues are explicitly numbered, and not in the config space.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Use it in virtio_net (replacing buggy version there), it's also going
to be used by TAP for partial csum support.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NOliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NOliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Signed-off-by: NOliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

This way we can remove TCP and DCCP specific versions of

sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port
sk->sk_prot->hash:     inet_hash is directly used, only v6 need
                       a specific version to deal with mapped sockets
sk->sk_prot->unhash:   both v4 and v6 use inet_hash directly

struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so
that inet_csk_get_port can find the per family routine.

Now only the lookup routines receive as a parameter a struct inet_hashtable.

With this we further reuse code, reducing the difference among INET transport
protocols.

Eventually work has to be done on UDP and SCTP to make them share this
infrastructure and get as a bonus inet_diag interfaces so that iproute can be
used with these protocols.

net-2.6/net/ipv4/inet_hashtables.c:
  struct proto			     |   +8
  struct inet_connection_sock_af_ops |   +8
 2 structs changed
  __inet_hash_nolisten               |  +18
  __inet_hash                        | -210
  inet_put_port                      |   +8
  inet_bind_bucket_create            |   +1
  __inet_hash_connect                |   -8
 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191

net-2.6/net/core/sock.c:
  proto_seq_show                     |   +3
 1 function changed, 3 bytes added, diff: +3

net-2.6/net/ipv4/inet_connection_sock.c:
  inet_csk_get_port                  |  +15
 1 function changed, 15 bytes added, diff: +15

net-2.6/net/ipv4/tcp.c:
  tcp_set_state                      |   -7
 1 function changed, 7 bytes removed, diff: -7

net-2.6/net/ipv4/tcp_ipv4.c:
  tcp_v4_get_port                    |  -31
  tcp_v4_hash                        |  -48
  tcp_v4_destroy_sock                |   -7
  tcp_v4_syn_recv_sock               |   -2
  tcp_unhash                         | -179
 5 functions changed, 267 bytes removed, diff: -267

net-2.6/net/ipv6/inet6_hashtables.c:
  __inet6_hash |   +8
 1 function changed, 8 bytes added, diff: +8

net-2.6/net/ipv4/inet_hashtables.c:
  inet_unhash                        | +190
  inet_hash                          | +242
 2 functions changed, 432 bytes added, diff: +432

vmlinux:
 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7

/home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c:
  tcp_v6_get_port                    |  -31
  tcp_v6_hash                        |   -7
  tcp_v6_syn_recv_sock               |   -9
 3 functions changed, 47 bytes removed, diff: -47

/home/acme/git/net-2.6/net/dccp/proto.c:
  dccp_destroy_sock                  |   -7
  dccp_unhash                        | -179
  dccp_hash                          |  -49
  dccp_set_state                     |   -7
  dccp_done                          |   +1
 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241

/home/acme/git/net-2.6/net/dccp/ipv4.c:
  dccp_v4_get_port                   |  -31
  dccp_v4_request_recv_sock          |   -2
 2 functions changed, 33 bytes removed, diff: -33

/home/acme/git/net-2.6/net/dccp/ipv6.c:
  dccp_v6_get_port                   |  -31
  dccp_v6_hash                       |   -7
  dccp_v6_request_recv_sock          |   +5
 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up: When looping over RPC version and procedure numbers, use
unsigned index variables.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Do it for the server code...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Move the initialzation in __svc_create_thread that happens prior to
thread creation to a new function. Export the function to allow
services to have better control over the svc_rqst structs.

Also rearrange the rqstp initialization to prevent NULL pointer
dereferences in svc_exit_thread in case allocations fail.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add the svcrdma module to the xprtrdma makefile.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This logic parses the ONCRDMA protocol headers that
precede the actual RPC header. It is placed in a separate
file to keep all protocol aware code in a single place.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This file implements the RDMA transport sendto function. A RPC reply
on an RDMA transport consists of some number of RDMA_WRITE requests
followed by an RDMA_SEND request. The sendto function parses the
ONCRPC RDMA reply header to determine how to send the reply back to
the client. The send queue is sized so as to be able to send complete
replies for requests in most cases.  In the event that there are not
enough SQ WR slots to reply, e.g.  big data, the send will block the
NFSD thread. The I/O callback functions in svc_rdma_transport.c that
reap WR completions wake any waiters blocked on the SQ. In general,
the goal is not to block NFSD threads and the has_wspace method
stall requests when the SQ is nearly full.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This file implements the RDMA transport recvfrom function. The function
dequeues work reqeust completion contexts from an I/O list that it shares
with the I/O tasklet in svc_rdma_transport.c. For ONCRPC RDMA, an RPC may
not be complete when it is received. Instead, the RDMA header that precedes
the RPC message informs the transport where to get the RPC data from on
the client and where to place it in the RPC message before it is delivered
to the server. The svc_rdma_recvfrom function therefore, parses this RDMA
header and issues any necessary RDMA operations to fetch the remainder of
the RPC from the client.

Special handling is required when the request involves an RDMA_READ.
In this case, recvfrom submits the RDMA_READ requests to the underlying
transport driver and then returns 0. When the transport
completes the last RDMA_READ for the request, it enqueues it on a
read completion queue and enqueues the transport. The recvfrom code
favors this queue over the regular DTO queue when satisfying reads.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This file implements the core transport data management and I/O
path. The I/O path for RDMA involves receiving callbacks on interrupt
context. Since all the svc transport locks are _bh locks we enqueue the
transport on a list, schedule a tasklet to dequeue data indications from
the RDMA completion queue. The tasklet in turn takes _bh locks to
enqueue receive data indications on a list for the transport. The
svc_rdma_recvfrom transport function dequeues data from this list in an
NFSD thread context.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This file implements the RDMA transport module initialization and
termination logic and registers the transport sysctl variables.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Create a transport independent version of the svc_sock_names function.

The toclose capability of the svc_sock_names service can be implemented
using the svc_xprt_find and svc_xprt_close services.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Update the write handler for the portlist file to allow creating new
listening endpoints on a transport. The general form of the string is:

<transport_name><space><port number>

For example:

echo "tcp 2049" > /proc/fs/nfsd/portlist

This is intended to support the creation of a listening endpoint for
RDMA transports without adding #ifdef code to the nfssvc.c file.

Transports can also be removed as follows:

'-'<transport_name><space><port number>

For example:

echo "-tcp 2049" > /proc/fs/nfsd/portlist

Attempting to add a listener with an invalid transport string results
in EPROTONOSUPPORT and a perror string of "Protocol not supported".

Attempting to remove an non-existent listener (.e.g. bad proto or port)
results in ENOTCONN and a perror string of
"Transport endpoint is not connected"
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add a new svc function that allows a service to query whether a
transport instance has already been created. This is used in lockd
to determine whether or not a transport needs to be created when
a lockd instance is brought up.

Specifying 0 for the address family or port is effectively a wild-card,
and will result in matching the first transport in the service's list
that has a matching class name.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add a file that when read lists the set of registered svc
transports.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Some transports have a header in front of the RPC header. The current
defer/revisit processing considers only the iov_len and arg_len to
determine how much to back up when saving the original request
to revisit. Add a field to the rqstp structure to save the size
of the transport header so svc_defer can correctly compute
the start of a request.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This functionally trivial patch moves all of the transport independent
functions from the svcsock.c file to the transport independent svc_xprt.c
file.

In addition the following formatting changes were made:
- White space cleanup
- Function signatures on single line
- The inline directive was removed
- Lines over 80 columns were reformatted
- The term 'socket' was changed to 'transport' in comments
- The SMP comment was moved and updated.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The svc_check_conn_limits function only manipulates xprt fields. Change references
to svc_sock->sk_xprt to svc_xprt directly.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This functionally empty patch removes rq_sock and unamed union
from rqstp structure.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Move the svc transport list logic into common transport creation code.
Refactor this code path to make the flow of control easier to read.

Move the setting and clearing of the BUSY_BIT during transport creation
to common code.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This function is transport independent. Change it to use svc_xprt directly
and change it's name to reflect this.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

All of the transport field and functions used by svc_recv are now
transport independent. Change the svc_recv function to use the svc_xprt
structure directly instead of the transport specific svc_sock structure.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The svc_sock_release function only touches transport independent fields.
Change the function to manipulate svc_xprt directly instead of the transport
dependent svc_sock structure.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This patch moves the transport sockaddr to the svc_xprt
structure.  Convenience functions are added to set and
get the local and remote addresses of a transport from
the transport provider as well as determine the length
of a sockaddr.

A transport is responsible for setting the xpt_local
and xpt_remote addresses in the svc_xprt structure as
part of transport creation and xpo_accept processing. This
cannot be done in a generic way and in fact varies
between TCP, UDP and RDMA. A set of xpo_ functions
(e.g. getlocalname, getremotename) could have been
added but this would have resulted in additional
caching and copying of the addresses around.  Note that
the xpt_local address should also be set on listening
endpoints; for TCP/RDMA this is done as part of
endpoint creation.

For connected transports like TCP and RDMA, the addresses
never change and can be set once and copied into the
rqstp structure for each request. For UDP, however, the
local and remote addresses may change for each request. In
this case, the address information is obtained from the
UDP recvmsg info and copied into the rqstp structure from
there.

A svc_xprt_local_port function was also added that returns
the local port given a transport. This is used by
svc_create_xprt when returning the port associated with
a newly created transport, and later when creating a
generic find transport service to check if a service is
already listening on a given port.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This patch moves the transport independent sk_deferred list to the svc_xprt
structure and updates the svc_deferred_req structure to keep pointers to
svc_xprt's directly. The deferral processing code is also moved out of the
transport dependent recvfrom functions and into the generic svc_recv path.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Move the authinfo cache to svc_xprt. This allows both the TCP and RDMA
transports to share this logic. A flag bit is used to determine if
auth information is to be cached or not. Previously, this code looked
at the transport protocol.

I've also changed the spin_lock/unlock logic so that a lock is not taken for
transports that are not caching auth info.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

With the implementation of the new mark and sweep algorithm for shutting
down old connections, the sk_lastrecv field is no longer needed.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Now that the svc_xprt_received function handles transports, the call
to svc_xprt_received in the xpo_tcp_accept function can be moved to
common code.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

All fields touched by svc_sock_received are now transport independent.
Change it to use svc_xprt directly. This function is called from
transport dependent code, so export it.

Update the comment to clearly state the rules for calling this function.
Signed-off-by: NTom Tucker <tom@opengridcomputing.com>
Acked-by: NNeil Brown <neilb@suse.de>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NGreg Banks <gnb@sgi.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>