be2net driver sends a shutdown event to ocrdma during shutdown/reboot.
As part of event processing, ocrdma calls close() and remove() to free
all the resources associated with ocrdma. This also frees irqs used by
ocrdma.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add a new entry under sysfs for getting the HW type.
Add a new-line character for the FW version string
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch implements routine to query the PFC priority from the
adapter port.

Following are the changes implemented:

 * A new FW command is implemented to query the operational/admin DCBX
   configuration from the FW and obtain active priority(service
   level).
 * Adds support for the async event reported by FW when the PFC
   priority changes. Service level is re-initialized during modify_qp
   or create_ah, based on this event.
 * Maintain SL value in ocrdma_dev structure and refer that as and
   when needed.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Unregister the inet notifier during ocrdma unload to avoid a panic after
driver unload.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Clean up code.  Also modifying GSI QP to error during ocrdma_close is fixed.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Adding a sysfs file for getting the FW version.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Issue mailbox commands to query ocrdma controller information and phy
information and print them while adding ocrdma device.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Update the driver vrsion string and node description string
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

While loading RoCE driver be2net driver should check for ABI version
to catch functional incompatibilities.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

ocrdma driver selects execution path based on sli_family and asic
generation number.  This introduces code to read the asic gen number
from pci register instead of obtaining it from the Emulex NIC driver.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev()
when building the GID table for a vlan interface.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This fixes the build if IPV6 isn't enabled.
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch is similar in spirit to the "IB/mlx4: Use IBoE (RoCE) IP
based GIDs in the port GID table" patch.

Changes to inet4 and inet6 addresses for the host are monitored and if
the address is associated with an ocrdma device then a gid is added or
deleted from the device's gid table. The gid format will be a IPv4 to
IPv6 mapped or the IPv6 address.

Cc: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1) ocrdma_remove_free() is called from a call_rcu callback funtion
   context, which can be a bottom-half context. So the code in
   ocrdma_remove_free should not sleep.

   But ocrdma_cleanup_hw() can sleep, So move it ocrdma_remove()
   instead of ocrdma_remove_free.

2) Fix a couple of kbuild test robot warnings.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

These aren't necessary after switch blocks.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add ABI versioning support between driver and userspace library.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Create_CQ verb doesn't provide a PD pointer.  So, until now we are
creating all (both userspace and kernel) CQ DB regions from PD0.  This
will result in mmapping PD0 to applications.  A rogue userspace
application can mess things up.

Also more serious issues is even the be2net NIC uses PD0.

This patch addresses this problem by:

1) Create a PD page for every userspace application when the
   alloc_ucontext is called. This will be destroyed in
   dealloc_ucontext.
2) All CQs for that context will use the PD allocated in ucontext.
3) The first create_PD call from application will result in returning
   the PD address from its ucontext (no new PD will be created).
4) For subsecquent create_pd calls from application, we create new PDs for
   the application.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Also get the max_srq value from query_config mailbox response.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Remove private macro ocrdma_err and replace with standard pr_err.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Convert to the much saner new idr interface.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_VLAN_8021Q is not set, then vlan_dev_real_dev() just goes BUG(),
so we shouldn't call it unless we're actually dealing with a VLAN netdev.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Fix reporting GID table addition events.
2. Enable vlan based GID entries only when VLAN is enabled at compile
   time (test CONFIG_VLAN_8021Q / CONFIG_VLAN_8021Q_MODULE).
Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

"make versioncheck" shows:

    drivers/infiniband/hw/ocrdma/ocrdma_main.c: 29 linux/version.h not needed.
    drivers/infiniband/hw/ocrdma/ocrdma_verbs.h: 31 linux/version.h not needed.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When IPV6 is not enabled:

    ERROR: "register_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined!
    ERROR: "unregister_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined!

Fix this by wrapping the inet6 calls in #ifdef IPV6.  Also make the
ocrdma module depend on (IPV6 || IPV6=n) to forbid the case of modular
ipv6 but built-in ocrdma (which can't work, because ocrdma calls ipv6
functions).
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Events sent to ocrdma_inet6addr_event() are sent from an atomic context,
therefore we can't try to lock a mutex within the notifier callback.

We could just switch the mutex to a spinlock since all it does it
protect a list, but I've gone ahead and switched the list to use RCU
instead.  I couldn't fully test it since I don't have IB hardware, so
if it doesn't fully work for some reason let me know and I'll switch
it back to using a spinlock.
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>

[ Fixed locking in ocrdma_add().  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>