I suspect this is a -ECUTPASTE fault from the initial implementation. If
we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG
implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues.

The kvm/api.txt document describes all arm64 registers as starting with
0x60xx... (i.e KVM_REG_ARM64).
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

A userspace process can map device MMIO memory via VFIO or /dev/mem,
e.g., for platform device passthrough support in QEMU.

During early development, we found the PAGE_S2 memory type being used
for MMIO mappings.  This patch corrects that by using the more strongly
ordered memory type for device MMIO mappings: PAGE_S2_DEVICE.
Signed-off-by: NKim Phillips <kim.phillips@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Currently when a KVM region is deleted or moved after
KVM_SET_USER_MEMORY_REGION ioctl, the corresponding
intermediate physical memory is not unmapped.

This patch corrects this and unmaps the region's IPA range
in kvm_arch_commit_memory_region using unmap_stage2_range.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

unmap_range() was utterly broken, to quote Marc, and broke in all sorts
of situations.  It was also quite complicated to follow and didn't
follow the usual scheme of having a separate iterating function for each
level of page tables.

Address this by refactoring the code and introduce a pgd_clear()
function.
Reviewed-by: NJungseok Lee <jays.lee@samsung.com>
Reviewed-by: NMario Smarduch <m.smarduch@samsung.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

A struct member variable is set to the same value more than once

This was found using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's impossible to fall into the error handling of the TLB index after
being masked by (KVM_MIPS_GUEST_TLB_SIZE - 1). Remove the dead code.
Reported-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The commpage is allocated using kzalloc(), so there's no need of cleaning
the memory of the kvm_mips_commpage struct and its internal mips_coproc.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since all the files are in arch/mips/kvm/, there's no need of the prefixes
"kvm_" and "kvm_mips_".
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The keyword volatile for idx in the TLB functions is unnecessary.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No logic changes inside.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace printks with kvm_[err|info|debug].
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No logic changes inside.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvms390-20140626' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Fix sie.h header related problems introduced during the 3.16 development
cycle.

Fix bad x86 regression introduced during merge window.

We import the CPL via SS.DPL since ae9fedc7. However, we fail to
export it this way so far. This caused spurious guest crashes, e.g. of
Linux when accessing the vmport from guest user space which triggered
register saving/restoring to/from host user space.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

sie.h was missing in arch/s390/include/uapi/asm/Kbuild and therefore missed
the "make headers_check" target.
If added it reveals that also arch/s390/include/asm/sigp.h would become uapi.
This is something we certainly do not want. So remove that dependency as well.

The header file was merged with ceae283b "KVM: s390: add sie exit
reasons tables", therefore we never had a kernel release with this commit and
can still change anything.
Acked-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

VMX instructions use 32-bit operands in 32-bit mode, and 64-bit operands in
64-bit mode.  The current implementation is broken since it does not use the
register operands correctly, and always uses 64-bit for reads and writes.
Moreover, write to memory in vmwrite only considers long-mode, so it ignores
cs.l. This patch fixes this behavior.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On 32-bit mode only bits [31:0] of the CR should be used for setting the CR
value.  Otherwise, the host may incorrectly assume the value is invalid if bits
[63:32] are not zero.  Moreover, the CR is currently being read twice when CR8
is used.  Last, nested mov-cr exiting is modified to handle the CR value
correctly as well.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, the hypercall handling routine only considers LME as an indication
to whether the guest uses 32/64-bit mode. This is incosistent with hyperv
hypercalls handling and against the common sense of considering cs.l as well.
This patch uses is_64_bit_mode instead of is_long_mode for that matter. In
addition, the result is masked in respect to the guest execution mode. Last, it
changes kvm_hv_hypercall to use is_64_bit_mode as well to simplify the code.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the guest sets DR6 and DR7, KVM asserts the high 32-bits are clear, and
otherwise injects a #GP exception. This exception should only be injected only
if running in long-mode.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Many real CPUs get this wrong as well, but ours is totally off: bits 9:1
define the highest index value.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Allow L1 to "leak" its debug controls into L2, i.e. permit cleared
VM_{ENTRY_LOAD,EXIT_SAVE}_DEBUG_CONTROLS. This requires to manually
transfer the state of DR7 and IA32_DEBUGCTLMSR from L1 into L2 as both
run on different VMCS.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SDM says bits 1, 4-6, 8, 13-16, and 26 have to be set.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We already have this control enabled by exposing a broken
MSR_IA32_VMX_PROCBASED_CTLS value. This will properly advertise our
capability once the value is fixed by clearing the right bits in
MSR_IA32_VMX_TRUE_PROCBASED_CTLS. We also have to ensure to test the
right value on L2 entry.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We already implemented them but failed to advertise them. Currently they
all return the identical values to the capability MSRs they are
augmenting. So there is no change in exposed features yet.

Drop related comments at this chance that are partially incorrect and
redundant anyway.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The spec says those controls are at bit position 2 - makes 4 as value.

The impact of this mistake is effectively zero as we only use them to
ensure that these features are set at position 2 (or, previously, 1) in
MSR_IA32_VMX_{EXIT,ENTRY}_CTLS - which is and will be always true
according to the spec.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On long-mode the current NOP (0x90) emulation still writes back to RAX.  As a
result, EAX is zero-extended and the high 32-bits of RAX are cleared.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Even if the condition of cmov is not satisfied, bits[63:32] should be cleared.
This is clearly stated in Intel's CMOVcc documentation.  The solution is to
reassign the destination onto itself if the condition is unsatisfied.  For that
matter the original destination value needs to be read.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Return unhandlable error on inter-privilege level ret instruction.  This is
since the current emulation does not check the privilege level correctly when
loading the CS, and does not pop RSP/SS as needed.

Cc: stable@vger.kernel.org
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The emulator does not emulate the xadd instruction correctly if the two
operands are the same.  In this (unlikely) situation the result should be the
sum of X and X (2X) when it is currently X.  The solution is to first perform
writeback to the source, before writing to the destination.  The only
instruction which should be affected is xadd, as the other instructions that
perform writeback to the source use the extended accumlator (e.g., RAX:RDX).
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The current emulation of bit operations ignores the offset from the destination
on 64-bit target memory operands. This patch fixes this behavior.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

use mm.h definition

Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It was using the wrong member of the union.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Memory is always the destination for BitOp instructions.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We did not do that when interruptibility was added to the emulator,
because at the time pop to segment was not implemented.  Now it is,
add it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In 64-bit mode, when the destination is a register, the assignment is done
according to the operand size. Otherwise (memory operand or no 64-bit mode), a
16-bit assignment is performed.

Currently, 16-bit assignment is always done to the destination.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

cmpxchg16b is currently unimplemented in the emulator. The least we can do is
return error upon the emulation of this instruction.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The rdpmc emulation checks that the counter (ECX) is not higher than 2, without
taking into considerations bits 30:31 role (e.g., bit 30 marks whether the
counter is fixed). The fix uses the pmu information for checking the validity
of the pmu counter.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the operand-size prefix (0x66) is used in 64-bit mode, the emulator would
assume the destination operand is 64-bit, when it should be 32-bit.

Reminder: movnti does not support 16-bit operands and its default operand size
is 32-bit.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The current implementation of cmpxchg does not update the flags correctly,
since the accumulator should be compared with the destination and not the other
way around. The current implementation does not update the flags correctly.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>