Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 02 3月, 2017 1 次提交
  3. 17 2月, 2017 1 次提交
    • P
      s390: kernel: Audit and remove any unnecessary uses of module.h · 3994a52b
      由 Paul Gortmaker 提交于 
      Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each change instance
for the presence of either and replace as needed.  Build testing
revealed some implicit header usage that was fixed up accordingly.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      3994a52b
  5. 07 12月, 2016 2 次提交
  7. 22 11月, 2016 1 次提交
  9. 11 11月, 2016 2 次提交
  11. 10 11月, 2016 2 次提交
  13. 18 7月, 2016 1 次提交
  15. 28 6月, 2016 1 次提交
  17. 13 6月, 2016 1 次提交
    • M
      s390/mm: simplify the TLB flushing code · 64f31d58
      由 Martin Schwidefsky 提交于 
      ptep_flush_lazy and pmdp_flush_lazy use mm->context.attach_count to
decide between a lazy TLB flush vs an immediate TLB flush. The field
contains two 16-bit counters, the number of CPUs that have the mm
attached and can create TLB entries for it and the number of CPUs in
the middle of a page table update.

The __tlb_flush_asce, ptep_flush_direct and pmdp_flush_direct functions
use the attach counter and a mask check with mm_cpumask(mm) to decide
between a local flush local of the current CPU and a global flush.

For all these functions the decision between lazy vs immediate and
local vs global TLB flush can be based on CPU masks. There are two
masks:  the mm->context.cpu_attach_mask with the CPUs that are actively
using the mm, and the mm_cpumask(mm) with the CPUs that have used the
mm since the last full flush. The decision between lazy vs immediate
flush is based on the mm->context.cpu_attach_mask, to decide between
local vs global flush the mm_cpumask(mm) is used.

With this patch all checks will use the CPU masks, the old counter
mm->context.attach_count with its two 16-bit values is turned into a
single counter mm->context.flush_count that keeps track of the number
of CPUs with incomplete page table updates. The sole user of this
counter is finish_arch_post_lock_switch() which waits for the end of
all page table updates.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      64f31d58
  19. 06 5月, 2016 1 次提交
  21. 02 3月, 2016 1 次提交
    • T
      arch/hotplug: Call into idle with a proper state · fc6d73d6
      由 Thomas Gleixner 提交于 
      Let the non boot cpus call into idle with the corresponding hotplug state, so
the hotplug core can handle the further bringup. That's a first step to
convert the boot side of the hotplugged cpus to do all the synchronization
with the other side through the state machine. For now it'll only start the
hotplug thread and kick the full bringup of the cpu.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      fc6d73d6
  23. 19 1月, 2016 1 次提交
  25. 11 1月, 2016 1 次提交
  27. 18 12月, 2015 1 次提交
  29. 27 11月, 2015 5 次提交
  31. 14 10月, 2015 3 次提交
  33. 29 7月, 2015 1 次提交
  35. 29 6月, 2015 1 次提交
  37. 25 6月, 2015 3 次提交
    • M
      s390/kdump: fix nosmt kernel parameter · 1592a8e4
      由 Michael Holzheu 提交于 
      It turned out that SIGP set-multi-threading can only be done once.
Therefore switching to a different MT level after switching to
sclp.mtid_prev in the dump case fails.

As a symptom specifying the "nosmt" parameter currently fails for
the kdump kernel and the kernel starts with multi-threading enabled.

So fix this and issue diag 308 subcode 1 call after collecting the
CPU states for the dump. Also enhance the diag308_reset() function to
be usable also with enabled lowcore protection and prefix register != 0.
After the reset it is possible to switch the MT level again. We have
to do the reset very early in order not to kill the already initialized
console. Therefore instead of kmalloc() the corresponding memblock
functions have to be used. To avoid copying the sclp cpu code into
sclp_early, we now use the simple sigp loop method for CPU detection.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      1592a8e4
    • M
      s390/smp: cleanup core vs. cpu in the SCLP interface · d08d9430
      由 Martin Schwidefsky 提交于 
      The SCLP interface to query, configure and deconfigure CPUs actually
operates on cores. For a machine without the multi-threading faciltiy
a CPU and a core are equivalent but starting with System z13 a core
can have multiple hardware threads, also referred to as logical CPUs.

To avoid confusion replace the word 'cpu' with 'core' in the SCLP
interface. Also replace MAX_CPU_ADDRESS with SCLP_MAX_CORES.
The core-id is an 8-bit field, the maximum thread id is in the range
0-31. The theoretical limit for the CPU address is therefore 8191.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      d08d9430
    • M
      s390/smp: fix sigp cpu detection loop · e7086eb1
      由 Martin Schwidefsky 提交于 
      On a (theoretical) system where the read-cpu-info SCLP command does
not work but SMT is enabled, the sigp detection loop may not find
all configured cores. The maximum CPU address needs to be shifted
with smp_cpu_mt_shift.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      e7086eb1
  39. 13 5月, 2015 3 次提交
  41. 13 4月, 2015 1 次提交
  43. 25 3月, 2015 1 次提交
    • H
      s390: remove 31 bit support · 5a79859a
      由 Heiko Carstens 提交于 
      Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.

The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.

Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      5a79859a
  45. 12 2月, 2015 1 次提交
  47. 22 1月, 2015 2 次提交
    • P
      s390/smp: remove check for CONFIG_ZFCPDUMP · 032f1be0
      由 Paul Bolle 提交于 
      Commit 725908110a1f ("s390: add SMT support") added a check for
CONFIG_ZFCPDUMP. But the Kconfig symbol ZFCPDUMP was removed in v3.16
through commit bf28a597 ("s390/dump: Remove CONFIG_ZFCPDUMP"). So
this check will always evaluate to false. No one noticed probably
because the code also checks for CONFIG_CRASH_DUMP which "also enables
s390 zfcpdump".

Dump the unneeded check.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      032f1be0
    • M
      s390: add SMT support · 10ad34bc
      由 Martin Schwidefsky 提交于 
      The multi-threading facility is introduced with the z13 processor family.
This patch adds code to detect the multi-threading facility. With the
facility enabled each core will surface multiple hardware threads to the
system. Each hardware threads looks like a normal CPU to the operating
system with all its registers and properties.

The SCLP interface reports the SMT topology indirectly via the maximum
thread id. Each reported CPU in the result of a read-scp-information
is a core representing a number of hardware threads.

To reflect the reduced CPU capacity if two hardware threads run on a
single core the MT utilization counter set is used to normalize the
raw cputime obtained by the CPU timer deltas. This scaled cputime is
reported via the taskstats interface. The normal /proc/stat numbers
are based on the raw cputime and are not affected by the normalization.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      10ad34bc
  49. 27 10月, 2014 1 次提交
    • H
      s390/ftrace,kprobes: allow to patch first instruction · c933146a
      由 Heiko Carstens 提交于 
      If the function tracer is enabled, allow to set kprobes on the first
instruction of a function (which is the function trace caller):

If no kprobe is set handling of enabling and disabling function tracing
of a function simply patches the first instruction. Either it is a nop
(right now it's an unconditional branch, which skips the mcount block),
or it's a branch to the ftrace_caller() function.

If a kprobe is being placed on a function tracer calling instruction
we encode if we actually have a nop or branch in the remaining bytes
after the breakpoint instruction (illegal opcode).
This is possible, since the size of the instruction used for the nop
and branch is six bytes, while the size of the breakpoint is only
two bytes.
Therefore the first two bytes contain the illegal opcode and the last
four bytes contain either "0" for nop or "1" for branch. The kprobes
code will then execute/simulate the correct instruction.

Instruction patching for kprobes and function tracer is always done
with stop_machine(). Therefore we don't have any races where an
instruction is patched concurrently on a different cpu.
Besides that also the program check handler which executes the function
trace caller instruction won't be executed concurrently to any
stop_machine() execution.

This allows to keep full fault based kprobes handling which generates
correct pt_regs contents automatically.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      c933146a
  51. 09 10月, 2014 1 次提交
    • M
      s390/kdump: add support for vector extension · a62bc073
      由 Michael Holzheu 提交于 
      With this patch for kdump the s390 vector registers are stored into the
prepared save areas in the old kernel and into the REGSET_VX_LOW and
REGSET_VX_HIGH ELF notes for /proc/vmcore in the new kernel.

The NT_S390_VXRS_LOW note contains the lower halves of the first 16 vector
registers 0-15. The higher halves are stored in the floating point register
ELF note.  The NT_S390_VXRS_HIGH contains the full vector registers 16-31.

The kernel provides a save area for storing vector register in case of
machine checks. A pointer to this save are is stored in the CPU lowcore
at offset 0x11b0. This save area is also used to save the registers for
kdump. In case of a dumped crashed kdump those areas are used to extract
the registers of the production system.

The vector registers for remote CPUs are stored using the "store additional
status at address" SIGP. For the dump CPU the vector registers are stored
with the VSTM instruction.

With this patch also zfcpdump stores the vector registers.
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      a62bc073