Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even
if no G2D support is available. Let the ioctl fail when this is the
case, so that userspace can accurately probe for G2D support.

This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't
fail when G2D is absent, leading to a segfault later.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NINki Dae <inki.dae@samsung.com>

Both exynos_g2d_set_cmdlist_ioctl and exynos_g2d_exec_ioctl don't check
if the G2D was succesfully probe. If that is not the case, then g2d_priv
is just NULL and extracting 'dev' from it in the next step  is going to
produce a kernel oops.

Add proper checks and return ENODEV if the G2D is not available.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NINki Dae <inki.dae@samsung.com>

The hdmiphy can be apb and hdmiphy_port can be null. So before
accessing hdmiphy_port, it should be checked.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The mixer graphic layer 0 isn't blended as default by commit
0377f4ed(drm/exynos: Don't blend mixer
layer 0). But it needs to be blended with graphic layer 0 if video layer
is enabled by vp because video layer is bottom.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Add MODULE_DEVICE_TABLE calls for the various OF match tables that
currently don't have one. This allows the module to be
autoloaded based on devicetree information.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This reverts commit d0896218 was
original to prevent multiple MODULE_DEVICE_TABLE in one module.
Which, as a side-effect broke autoloading of the module.

Since 21bdd17b it is possible to have
multiple calls to MODULE_DEVICE_TABLE, so the patch can be
reverted to restore support for autoloading
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Since 21bdd17b it is possible to have
multiple calls to MODULE_DEVICE_TABLE, so the patch can be
reverted to restore support for autoloading

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_fimd.c
	drivers/gpu/drm/exynos/exynos_drm_g2d.c
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch puts repeated code sequence into one function, removes verbose
comments and decreases log verbosity.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There is no gain in passing id by pointer to be filled.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In case of error callback prints already corresponding message.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch simplifies ipp_find_obj and removes debug messages.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Argument checks are redundant, clients always check ippdrv before calling
these functions.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The only thing function should check is if there are buffers in respective
queues.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

list_first_entry does not return NULL on empty list so this check
does not make sense. Moreover there is already code which prevents calling
list_first_entry on empty lists.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There is no reason to allocate intermediate variable.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

exynos_drm_gem_get_dma_addr returns dma_addr_t, type casting to void* and
back is not necessary.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

struct exynos_drm_ipp_private contains only one pointer so all occurrences
of the struct can be replaced by the pointer itself.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch removes unused event_list field from struct exynos_drm_ipp_private.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch replaces type casting with proper pointer.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds common part of dsi node.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds mipi-phy node for MIPI DSI device.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds sysreg property to fimd device node
which is required to use I80 interface.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds sysreg property to fimd device node
which is required to use I80 interface.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The offset of register DSIM_PLLTMR_REG in Exynos5410 / 5420 / 5440
SoCs is different from the one in Exynos4 SoCs.

In case of Exynos5410 / 5420 / 5440 SoCs, there is no frequency
band bit in DSIM_PLLCTRL_REG, and it uses DSIM_PHYCTRL_REG and
DSIM_PHYTIMING*_REG instead.
So this patch adds driver data to distinguish it.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds relevant to exynos5410 compatible
for exynos5410 / 5420 / 5440 SoCs support.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

To support MIPI command mode based I80 interface panel,
FIMD should do followings:
- Sets LCD I80 interface timings configuration.
- Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration.
- Sets LCD block configuration for I80 interface.
- Sets ideal(pixel) clock is 2 times faster than the original one
  to generate frame done IRQ prior to the next TE signal.
- Implements trigger feature that transfers image data if there is page
  flip request, and implements TE handler to call trigger function.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This is a temporary solution and should be made by more
generic way.

To support LCD I80 interface, the DSI host should register
TE interrupt handler from the TE GPIO of attached panel.
So the panel generates a tearing effect synchronization signal
then the DSI host calls the CRTC device manager to trigger
to transfer video image.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

To support LCD I80 interface, the panel should generate
Tearing Effect synchronization signal between MCU and FB
to display video images.
And the display controller should trigger to transfer
video image at this signal.
So the panel receives the TE IRQ, then calls these handler
chains to notify it to the display controller.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In case of using MIPI DSI based I80 interface panel,
the relevant registers should be set.
So this patch adds relevant DT bindings.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip completion
infinitely.
And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip()
when exynos_drm_crtc_mode_set_commit() is failed.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This configuration could be used in MIPI DSI command mode also.
And adds user manual description for display configuration.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Configuration sets for Exynos 4210 and 4x12 SoC were already defined in
Exynos HDMI and Mixed drivers, but they lacked proper linking to device
tree 'compatible' values. This patch fixes this issue adding support for
following compatible values: samsung,exynos4210-mixer,
samsung,exynos4212-mixer and samsung,exynos4210-hdmi. It also corrects
access to sclk_mixer clock, which is available only on Exynos 4210.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HDMI_EN regulator is additional regulator for providing voltage source
for DCC lines available on HDMI connector. When there is no power
provided for DDC epprom, some TV-sets do not pulls up HPD (hot plug
detect) line, what causes HDMI block to stay turned off. This patch
enables HDMI_EN regulator (if available) on driver probe and keep it
enabled all the time to let TV-set correctly signal HPD event.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

According to the header comment in the source file, the driver is
licensed under GPL v2, so update MODULE_LICENSE() to match that.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

'exynos_gem_obj' is not used in the function. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

'frame_size_code' is not used in the function. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fix a NULL pointer exception when main exynos drm driver was probed
successfully but no components were added (e.g. by incomplete DTS). In
such case the exynos_drm_load() is never called and drvdata is NULL.

The NULL pointer exception may theoretically also happen as a effect of race between
adding components and main driver: if suspend of the driver happens
before adding components.

Trace:
[    1.190295] [drm] Initialized drm 1.1.0 20060810
[    1.195209] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
(...)
[   24.001743] PM: Syncing filesystems ... done.
[   24.002177] Freezing user space processes ... (elapsed 0.000 seconds) done.
[   24.007403] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   24.032559] Unable to handle kernel NULL pointer dereference at virtual address 00000134
[   24.035007] pgd = dedd8000
[   24.037734] [00000134] *pgd=5ee13831, *pte=00000000, *ppte=00000000
[   24.043953] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[   24.049329] Modules linked in:
[   24.052371] CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-rc3-00035-geba20bbdde04-dirty #51
[   24.060354] task: df478000 ti: df480000 task.ti: df480000
[   24.065743] PC is at mutex_lock+0x10/0x50
[   24.069733] LR is at drm_modeset_lock_all+0x30/0xbc
[   24.074590] pc : [<c048516c>]    lr : [<c02a14b4>]    psr: a0000013
[   24.074590] sp : df481db8  ip : 00000000  fp : c05e524c
[   24.086045] r10: 00000002  r9 : c02c1fe4  r8 : deca5e44
[   24.091253] r7 : 00000000  r6 : 00000000  r5 : 0000014c  r4 : 00000134
[   24.097763] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : 00000134
[   24.104275] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   24.111391] Control: 10c53c7d  Table: 5edd806a  DAC: 00000015
[   24.117120] Process sh (pid: 1, stack limit = 0xdf480240)
[   24.122502] Stack: (0xdf481db8 to 0xdf482000)
[   24.126843] 1da0:                                                       dee01d80 c02a14b4
[   24.135004] 1dc0: 00000000 00000000 c07aff98 c02aec7c 00000002 00000000 00000000 c07aff98
[   24.143164] 1de0: deca5e10 c02aecf4 c02aecd4 c02c2010 00000000 c02c9470 00000000 00000000
[   24.151322] 1e00: 00000000 00000000 deca5e10 deca5e10 00000000 c07aff98 00000002 deca5e44
[   24.159482] 1e20: c06d8f78 c06fb800 deca5e78 c02ca660 df7baf00 007b0aa0 deca5e10 c06fb7c8
[   24.167641] 1e40: c07aff98 00000000 00000002 c02cbe18 9757aec5 00000005 9757aec5 00000005
[   24.175801] 1e60: ded1d380 00000003 00000003 c05c74d8 ded1d380 c07209d4 c05c7514 c07105d8
[   24.183960] 1e80: 01e2a738 c0068a74 00000000 c05c7514 ded1d380 c071c6e0 00000004 c07105d8
[   24.192119] 1ea0: 01e2a738 c047f1e0 c0600cc0 df481ec4 00000003 00000000 00000003 c05c74d8
[   24.200278] 1ec0: ded1d380 c071c6e0 c05c7514 c07105d8 01e2a738 c0069444 c06d905c 00000003
[   24.208438] 1ee0: 00000003 ded1d380 c06d9064 00000004 c05c3fc0 c0067d4c df535ab0 ded1d380
[   24.216596] 1f00: df481f80 ded1d380 00000004 ded1d1cc ded1d1c0 c0221724 00000004 c016ca6c
[   24.224756] 1f20: c016ca28 00000000 00000000 c016c1d4 00000000 00000000 b6f37000 df481f80
[   24.232915] 1f40: decedd80 00000004 df480000 df480000 b6f37000 c0110920 df47839c 60000013
[   24.241074] 1f60: 00000000 00000000 decedd80 decedd80 00000004 df480000 b6f37000 c0110da8
[   24.249233] 1f80: 00000000 00000000 00000004 b6edf5d8 00000004 b6f37000 00000004 c000f2a8
[   24.257393] 1fa0: 00001000 c000f0e0 b6edf5d8 00000004 00000001 b6f37000 00000004 00000000
[   24.265551] 1fc0: b6edf5d8 00000004 b6f37000 00000004 00000004 00000001 00000000 01e2a738
[   24.273711] 1fe0: 00000000 beba0a20 b6e1f4f0 b6e7022c 60000010 00000001 ffffffff ffffffff
[   24.281885] [<c048516c>] (mutex_lock) from [<c02a14b4>] (drm_modeset_lock_all+0x30/0xbc)
[   24.289950] [<c02a14b4>] (drm_modeset_lock_all) from [<c02aec7c>] (exynos_drm_suspend+0xc/0x64)
[   24.298627] [<c02aec7c>] (exynos_drm_suspend) from [<c02aecf4>] (exynos_drm_sys_suspend+0x20/0x34)
[   24.307568] [<c02aecf4>] (exynos_drm_sys_suspend) from [<c02c2010>] (platform_pm_suspend+0x2c/0x54)
[   24.316597] [<c02c2010>] (platform_pm_suspend) from [<c02c9470>] (dpm_run_callback+0x48/0x170)
[   24.325188] [<c02c9470>] (dpm_run_callback) from [<c02ca660>] (__device_suspend+0x128/0x39c)
[   24.333606] [<c02ca660>] (__device_suspend) from [<c02cbe18>] (dpm_suspend+0x5c/0x314)
[   24.341506] [<c02cbe18>] (dpm_suspend) from [<c0068a74>] (suspend_devices_and_enter+0x8c/0x598)
[   24.350185] [<c0068a74>] (suspend_devices_and_enter) from [<c0069444>] (pm_suspend+0x4c4/0x5d0)
[   24.358862] [<c0069444>] (pm_suspend) from [<c0067d4c>] (state_store+0x70/0xd4)
[   24.366156] [<c0067d4c>] (state_store) from [<c0221724>] (kobj_attr_store+0x14/0x20)
[   24.373885] [<c0221724>] (kobj_attr_store) from [<c016ca6c>] (sysfs_kf_write+0x44/0x48)
[   24.381867] [<c016ca6c>] (sysfs_kf_write) from [<c016c1d4>] (kernfs_fop_write+0xc0/0x17c)
[   24.390027] [<c016c1d4>] (kernfs_fop_write) from [<c0110920>] (vfs_write+0xa0/0x1c4)
[   24.397750] [<c0110920>] (vfs_write) from [<c0110da8>] (SyS_write+0x40/0x8c)
[   24.404782] [<c0110da8>] (SyS_write) from [<c000f0e0>] (ret_fast_syscall+0x0/0x3c)
[   24.412332] Code: e92d4010 e1a04000 f57ff05b f590f000 (e1903f9f)
[   24.418448] ---[ end trace cfa06690eabe8dd5 ]---
[   24.423032] Kernel panic - not syncing: Fatal exception
[   24.428220] CPU1: stopping
[   24.430905] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D       3.16.0-rc3-00035-geba20bbdde04-dirty #51
[   24.440549] [<c0016440>] (unwind_backtrace) from [<c001294c>] (show_stack+0x10/0x14)
[   24.448269] [<c001294c>] (show_stack) from [<c04811e8>] (dump_stack+0x80/0xcc)
[   24.455472] [<c04811e8>] (dump_stack) from [<c001495c>] (handle_IPI+0x130/0x15c)
[   24.462850] [<c001495c>] (handle_IPI) from [<c000862c>] (gic_handle_irq+0x60/0x68)
[   24.470400] [<c000862c>] (gic_handle_irq) from [<c0013440>] (__irq_svc+0x40/0x70)
[   24.477860] Exception stack(0xdf4bdf88 to 0xdf4bdfd0)
[   24.482898] df80:                   ffffffed 00000000 00000000 00000000 df4bc000 c06d042c
[   24.491058] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0
[   24.499214] dfc0: c0010324 c0010328 60000013 ffffffff
[   24.504254] [<c0013440>] (__irq_svc) from [<c0010328>] (arch_cpu_idle+0x28/0x30)
[   24.511634] [<c0010328>] (arch_cpu_idle) from [<c005f110>] (cpu_startup_entry+0x2c4/0x3f0)
[   24.519878] [<c005f110>] (cpu_startup_entry) from [<400086c4>] (0x400086c4)
[   24.526821] ---[ end Kernel panic - not syncing: Fatal exception
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The VFS layer handles those in the very same way, if unset. No need for
additional stubs.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Linux doesn't run on i386, anymore. See:

    commit d55c5a93
    Author: H. Peter Anvin <hpa@linux.intel.com>
    Date:   Wed Nov 28 11:50:24 2012 -0800

        x86, 386 removal: Remove CONFIG_CMPXCHG

        All 486+ CPUs support CMPXCHG, so remove the fallback 386 support
        code.

Furthermore, as the commit-message states, all 486+ CPUs support the
CMPXCHG instruction and thus even legacy DRM can run fine.

Drop the now superfluous "x86 == 3" check.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>