- cleaned up the partitions and include files
- added more flexible CS and address detection and setup

Regression tested on db1200 and db1550.
Signed-off-by: NPete Popov <ppopov@pacbell.net>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Simplify the debugging code further.
Update the TODO list
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add support for "4G Systems MTX-1 Flash device", better known as meshcube.

From: Bruno Randolf <bruno.randolf@4g-systems.biz>
Signed-off-by: NJoern Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Always keep valid data in reserved_size.

It did not cause problems, but the reservation code was unoptimal
when centralized summary was active or the size of the erase block
was very small.
Signed-off-by: NFerenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The changes introduced allow to suspend/resume NAND flash.
A new state (FL_PM_SUSPENDED) is introduced, as well as
routines for mtd->suspend and mtd->resume to put the flash in
suspended state from software pov.
Signed-off-by: NVitaly Wool <vwool@ru.mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

From: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Do the summary collection in the right place. If the device
was not writebuffered but had c->mtd->writev function
(e.g. blkmtd) the summary collector function was not called.
Signed-off-by: NFerenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Now we can use the generic platform driver
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

- Intel chip driver has a reboot notifier so no need to reset the chip here.
- Don't play with chip selects (platform code should do this if necessary).
Signed-off-by: NDavid Vrabel <dvrabel@arcom.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NFerenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of every (closed) erase block. It is
no longer necessary to scan all nodes separetly (and read all pages of them)
just read this "small" summary, where every information is stored which is
needed at mount time.

This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During
the mount process if there is no summary info the orignal scan process will
be executed. EBS works with NAND and NOR flashes, too.

There is a user space tool called sumtool to generate this summary
information for a JFFS2 image.
Signed-off-by: NFerenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

- Remove unused block, page parameters
- Add constant instead of runtime value
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

- Update OMAP OneNAND mapping file using device driver model
- Remove board specific macro and values.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Based on NAND memory bad block table code
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add OneNAND Sync. Burst Read support
Tested with OMAP platform
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

OneNAND is a new flash technology from Samsung with integrated SRAM
buffers and logic interface.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove support for virtual blocks, which are build by
concatenation of multiple physical erase blocks.

For more information please read the MTD mailing list thread
"[PATCH] remove support for virtual blocks"
Signed-off-by: NFerenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When data starts from the beginning of NAND page, 'len' must be zero, not
c->wbuf_page.

Thanks to Zoltan Sogor for reporting this problem.
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

From: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The bit mask used for oob size calculation was using 2 bits instead
of one. Fortunately the next bit has been 0 all the time.

Thanks to Nathan H. for pointing this out
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NYoussef Hmamouche <hyoussef@gmail.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Intels Sibley flash needs JFFS2 write buffer functionality
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

While this might be useful for all supported flash types, it is mandatory
for proper JFFS2 support with Sibley flash.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This updates the Primary Vendor-Specific Extended Query parsing to
version 1.4 in order to get the information about the Configurable
Programming Mode regions implemented in the Sibley flash, as well as
selecting the appropriate write command code.

This flash does not behave like traditional NOR flash when writing data.
While mtdblock should just work, further changes are needed for JFFS2 use.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This includes improved error handling/reporting plus some other
message cleanups.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This type of flash translation layer (FTL) is used by the Embedded BIOS
by General Software. It is known as the Resident Flash Disk (RFD), see:

http://www.gensw.com/pages/prod/bios/rfd.htmSigned-off-by: NSean Young <sean@mess.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove more noisy debugs. Add current->pid to debug messages.
Remove bogus includes.
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The previous changes introduced wrong length calculations.
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove extra noisy debugs
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Instead of building fragtree starting from node with the smallest version
number, start from the highest. This helps to avoid reading and checking
obsolete nodes.
Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>