- 11 10月, 2008 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits) [SCSI] zfcp: fix double dbf id usage [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev [SCSI] zfcp: fix erp list usage without using locks [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport [SCSI] zfcp: fix deadlock caused by shared work queue tasks [SCSI] zfcp: put threshold data in hba trace [SCSI] zfcp: Simplify zfcp data structures [SCSI] zfcp: Simplify get_adapter_by_busid [SCSI] zfcp: remove all typedefs and replace them with standards [SCSI] zfcp: attach and release SAN nameserver port on demand [SCSI] zfcp: remove unused references, declarations and flags [SCSI] zfcp: Update message with input from review [SCSI] zfcp: add queue_full sysfs attribute [SCSI] scsi_dh: suppress comparison warning [SCSI] scsi_dh: add Dell product information into rdac device handler [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option [SCSI] qla2xxx: fix printk format warnings [SCSI] qla2xxx: Update version number to 8.02.01-k8. [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing. [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling. ...
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block: (132 commits) doc/cdrom: Trvial documentation error, file not present block_dev: fix kernel-doc in new functions block: add some comments around the bio read-write flags block: mark bio_split_pool static block: Find bio sector offset given idx and offset block: gendisk integrity wrapper block: Switch blk_integrity_compare from bdev to gendisk block: Fix double put in blk_integrity_unregister block: Introduce integrity data ownership flag block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1 bio.h: Remove unused conditional code block: remove end_{queued|dequeued}_request() block: change elevator to use __blk_end_request() gdrom: change to use __blk_end_request() memstick: change to use __blk_end_request() virtio_blk: change to use __blk_end_request() blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure block: add lld busy state exporting interface block: Fix blk_start_queueing() to not kick a stopped queue include blktrace_api.h in headers_install ...
-
- 10 10月, 2008 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
This merges phase 1 of the x86 tree, which is a collection of branches: x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump, x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart, x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile, x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and x86/vmalloc and as Ingo says: "these are the easiest, purely independent x86 topics with no conflicts, in one nice Octopus merge". * 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits) x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE x86: mtrr_cleanup: first 1M may be covered in var mtrrs x86: mtrr_cleanup: print out correct type v2 x86: trivial printk fix in efi.c x86, debug: mtrr_cleanup print out var mtrr before change it x86: mtrr_cleanup try gran_size to less than 1M, v3 x86: mtrr_cleanup try gran_size to less than 1M, cleanup x86: change MTRR_SANITIZER to def_bool y x86, debug printouts: IOMMU setup failures should not be KERN_ERR x86: export set_memory_ro and set_memory_rw x86: mtrr_cleanup try gran_size to less than 1M x86: mtrr_cleanup prepare to make gran_size to less 1M x86: mtrr_cleanup safe to get more spare regs now x86_64: be less annoying on boot, v2 x86: mtrr_cleanup hole size should be less than half of chunk_size, v2 x86: add mtrr_cleanup_debug command line x86: mtrr_cleanup optimization, v2 x86: don't need to go to chunksize to 4G x86_64: be less annoying on boot x86, olpc: fix endian bug in openfirmware workaround ...
-
由 Linus Torvalds 提交于
We already did that a long time ago for pnp_system_init, but pnpacpi_init and pnpbios_init remained as subsys_initcalls, and get linked into the kernel before the arch-specific routines that finalize the PCI resources (pci_subsys_init). This means that the PnP routines would either register their resources before the PCI layer could, or would be unable to check whether a PCI resource had already been registered. Both are problematic. I wanted to do this before 2.6.27, but every time we change something like this, something breaks. That said, _every_ single time we trust some firmware (like PnP tables) more than we trust the hardware itself (like PCI probing), the problems have been worse. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs libata-eh: clear UNIT ATTENTION after reset ata_piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list libata: reorder ata_device to remove 8 bytes of padding on 64 bits [libata] pata_bf54x: Add proper PM operation pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC libata: Implement disk shock protection support [libata] Introduce ata_id_has_unload() PATA: RPC now selects HAVE_PATA_PLATFORM for pata platform driver ata_piix: drop merged SCR access and use slave_link instead libata: implement slave_link libata: misc updates to prepare for slave link libata: reimplement link iterator libata: make SCR access ops per-link
-
由 Randy Dunlap 提交于
The sbpcd tester program is not included in the kernel source tree, so remove the reference to it. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Reported-by: NNick Warne <nick@ukfsn.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This is debatable, but while we're debating it, let's disallow the combination of splice and an O_APPEND destination. It's not entirely clear what the semantics of O_APPEND should be, and POSIX apparently expects pwrite() to ignore O_APPEND, for example. So we could make up any semantics we want, including the old ones. But Miklos convinced me that we should at least give it some thought, and that accepting writes at arbitrary offsets is wrong at least for IS_APPEND() files (which always have O_APPEND set, even if the reverse isn't true: you can obviously have O_APPEND set on a regular file). So disallow O_APPEND entirely for now. I doubt anybody cares, and this way we have one less gray area to worry about. Reported-and-argued-for-by: NMiklos Szeredi <miklos@szeredi.hu> Acked-by: NJens Axboe <ens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X hwmon: (adt7473) Fix some bogosity in documentation file hwmon: Define sysfs interface for energy consumption register hwmon: (it87) Prevent power-off on Shuttle SN68PT eeepc-laptop: Fix hwmon interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] correct broken links and email addresses
-
由 Matt Mackall 提交于
This fixes the previous fix, which was completely wrong on closer inspection. This version has been manually tested with a user-space test harness and generates sane values. A nearly identical patch has been boot-tested. The problem arose from changing how kmalloc/kfree handled alignment padding without updating ksize to match. This brings it in sync. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Németh Márton 提交于
Replace the no longer working links and email address in the documentation and in source code. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 09 10月, 2008 28 次提交
-
-
由 Alistair John Strachan 提交于
Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Tested-by: NDaniel Exner <dex@dragonslave.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Alistair John Strachan 提交于
The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Tested-by: NDaniel Exner <dex@dragonslave.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Corentin Chary 提交于
Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc in new functions: Error(mmotm-2008-1002-1617//fs/block_dev.c:895): duplicate section name 'Description' Error(mmotm-2008-1002-1617//fs/block_dev.c:924): duplicate section name 'Description' Warning(mmotm-2008-1002-1617//fs/block_dev.c:1282): No description found for parameter 'pathname' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> cc: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Denis ChengRq 提交于
Since all bio_split calls refer the same single bio_split_pool, the bio_split function can use bio_split_pool directly instead of the mempool_t parameter; then the mempool_t parameter can be removed from bio_split param list, and bio_split_pool is only referred in fs/bio.c file, can be marked static. Signed-off-by: NDenis ChengRq <crquan@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
Helper function to find the sector offset in a bio given bvec index and page offset. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
This is a wrapper for accessing a gendisk's integrity bits. It allows the integrity support in MD to be compiled with BLK_DEV_INTEGRITY off. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
The DM and MD integrity support now depends on being able to use gendisks instead of block_devices when comparing integrity profiles. Change function parameters accordingly. Also update comparison logic so that two NULL profiles are a valid configuration. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
- kobject_del already puts the parent. - Set integrity profile to NULL to prevent stale data. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
A filesystem might supply its own integrity metadata. Introduce a flag that indicates whether the filesystem or the block layer owns the integrity buffer. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We need bdev_get_integrity() to support the pending md/dm patches. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Alberto Bertogli 提交于
The whole bio_integrity() definition is inside an #ifdef CONFIG_BLK_DEV_INTEGRITY, there's no need for the conditional code. Signed-off-by: NAlberto Bertogli <albertito@blitiri.com.ar> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Kiyoshi Ueda 提交于
This patch removes end_queued_request() and end_dequeued_request(), which are no longer used. As a results, users of __end_request() became only end_request(). So the actual code in __end_request() is moved to end_request() and __end_request() is removed. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Kiyoshi Ueda 提交于
This patch converts elevator to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' arguments is converted to 'error'. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Kiyoshi Ueda 提交于
This patch converts gdrom to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. gd.transfer is '1' in error cases and '0' in non-error cases, so gdrom hasn't been propagating any error code to the block layer. We can just convert error cases to '-EIO'. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Kiyoshi Ueda 提交于
This patch converts memstick to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Kiyoshi Ueda 提交于
This patch converts virtio_blk to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' argument is converted to 'error'. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Define as 32, which is is what BDEVNAME_SIZE is/was as well. This keeps the user interface the same and gets rid of the difference between kernel and user api here. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Kiyoshi Ueda 提交于
This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Elias Oltmanns 提交于
blk_start_queueing() should act like the generic queue unplugging and kicking and ignore a stopped queue. Such a queue may not be run until after a call to blk_start_queue(). Signed-off-by: NElias Oltmanns <eo@nebensachen.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Sven Schuetz 提交于
This header file is of interest for user space programming, i.e. for tools that process blktrace data. We would like to use it for a tool on-top of blktrace which processes data provided by blktrace. For this purpose, it would be helpful if the blktrace API would make it to /usr/include/linux. The git tree for the blktrace tools comes with its own copy of this header file. I didn't manage to replace that copy with the file generated by the patch below yet. A few more cleanups would be needed. For example, the blktrace ioctl numbers, which are currently defined in usr/include/fs.h, might need to be moved. Should be feasible, though. Signed-off-by: NSven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by: NMartin Peschke <mp3@de.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
By only allowing async IO to consume 3/4 ths of the tag depth, we always have slots free to serve sync IO. This is important to avoid having writes fill the entire tag queue, thus starving reads. Original patch and idea from Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We really need to know about the hardware tagging support as well, since if the SSD does not do tagging then we still want to idle. Otherwise have the same dependent sync IO vs flooding async IO problem as on rotational media. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
SSD devices should give an RPM setting of 1 in word 217 of the ID page. If we see such a device, tell the block layer about it. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-