commit b09a2ab2baeb36bf7ef7780405ad172281741c7c upstream.

There was a typo at the lower frequency limit for a DVB-C
card, causing the driver to fail while tuning channels at the
VHF range.

https://bugzilla.kernel.org/show_bug.cgi?id=202083

Fixes: f1b1eabf ("media: dvb: represent min/max/step/tolerance freqs in Hz")
Reported-by: NAri Kohtamäki <ari.kohtamaki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fa33cdbf3eceb0206a4f844fe91aeebcf6ff2b7a upstream.

In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.

Two particular errors have been observed when extending a file:

1. The final extent is larger than it should be, having been rounded up
   to a multiple of the block size.

B. The final extent is not shorter than it should be, due to not having
   been updated when the file's information length was increased.

[JK: simplified udf_do_extend_final_block(), fixed up some types]

Fixes: 2c948b3f ("udf: Avoid IO in udf_clear_inode")
CC: stable@vger.kernel.org
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.comSigned-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5858bdad4d0d0fc18bf29f34c3ac836e0b59441f upstream.

The directory may have been removed when entering
fscrypt_ioctl_set_policy().  If so, the empty_dir() check will return
error for ext4 file system.

ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error
because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'.  If
the fs is mounted with errors=panic, it will trigger a panic issue.

Add the check IS_DEADDIR() to fix this problem.

Fixes: 9bd8212f ("ext4 crypto: add encryption policy and password salt support")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: NHongjie Fang <hongjiefang@asrmicro.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b96226148491505318228ac52624956bd98f9e0c ]

rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget
to release it before return, may lead to a memory leak.
Signed-off-by: NLin Yi <teroincn@163.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 909105199a682cb09c500acd443d34b182846c9c ]

We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up.  This leads to a crash in
current_umask().

Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT.  We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Suggested-by: NTrond Myklebust <trondmy@hammerspace.com>
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 48620e341659f6e4b978ec229f6944dabe6df709 ]

The comment is correct, but the code ends up moving the bits four
places too far, into the VTUOp field.

Fixes: 11ea809f (net: dsa: mv88e6xxx: support 256 databases)
Signed-off-by: NRasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c6d9c35d16f1bafd3fec64b865e569e48cbcb514 ]

Run below script as root, dquot_add_space will return -EDQUOT since
__dquot_transfer call dquot_add_space with flags=0, and dquot_add_space
think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN.

mkfs.ext4 -O quota,project /dev/vdb
mount -o prjquota /dev/vdb /mnt
setquota -P 23 1 1 0 0 /dev/vdb
dd if=/dev/zero of=/mnt/test-file bs=4K count=1
chattr -p 23 test-file

Fixes: 7b9ca4c6 ("quota: Reduce contention on dq_data_lock")
Signed-off-by: Nyangerkun <yangerkun@huawei.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1ac3549ed58cdfdaf43bbf31ac260e2381cc0dae ]

The kernel panic was observed during iSCSI discovery via offload with below
call trace,

[ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60
[ 2115.646927] PGD 0
[ 2115.646932] Oops: 0000 [#1] SMP
[ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G
               OE  ------------   3.10.0-957.el7.x86_64 #1
[ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed]
[ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000
[ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>]  [<ffffffffacf7f0cc>] strncmp+0xc/0x60
[ 2115.647141] RSP: 0018:ffff8d66afb83c68  EFLAGS: 00010206
[ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a
[ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040
[ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff
[ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0
[ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8
[ 2115.647149] FS:  0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000
[ 2115.647151] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0
[ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2115.647155] PKRU: 00000000
[ 2115.647157] Call Trace:
[ 2115.647165]  [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi]
[ 2115.647184]  [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed]
[ 2115.647195]  [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed]
[ 2115.647206]  [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed]
[ 2115.647215]  [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660
[ 2115.647221]  [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580
[ 2115.647230]  [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed]
[ 2115.647278] RIP  [<ffffffffacf7f0cc>] strncmp+0xc/0x60

Fix kernel panic by validating the session targetname before providing TLV
data and confirming the presence of boot targets.
Signed-off-by: NNilesh Javali <njavali@marvell.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NChris Leech <cleech@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9476274093a0e79b905f4cd6cf6d149f65e02c17 ]

Left shifting the signed int value 1 by 31 bits has undefined behaviour
and the shift amount oq_no can be as much as 63.  Fix this by using
BIT_ULL(oq_no) instead.

Addresses-Coverity: ("Bad shift operation")
Fixes: f21fb3ed ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6f6a8622057c92408930c31698394fae1557b188 ]

A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by
setting skb's dev to NULL" is also needed by ip6_tunnel.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 74b67efa8d7b4f90137f0ab9a80dd319da050350 ]

The copy_from_user() function returns the number of bytes remaining
to be copied but we want to return a negative error code.  Otherwise
the callers treat it as a successful copy.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618131843.GA29463@mwandaSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ]

Some transceivers may comply with SFF-8472 even though they do not
implement the Digital Diagnostic Monitoring (DDM) interface described in
the spec. The existence of such area is specified by the 6th bit of byte
92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp
module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM
data was confirmed by Mellanox as correct and similar to other Passive
DACs from other manufacturers.
Signed-off-by: NMauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: NSudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9642fa73d073527b0cbc337cc17a47d545d82cd2 ]

Stopping external metadata arrays during resync/recovery causes
retries, loop of interrupting and starting reconstruction, until it
hit at good moment to stop completely. While these retries
curr_mark_cnt can be small- especially on HDD drives, so subtraction
result can be smaller than 0. However it is casted to uint without
checking. As a result of it the status bar in /proc/mdstat while stopping
is strange (it jumps between 0% and 99%).

The real problem occurs here after commit 72deb455b5ec ("block: remove
CONFIG_LBDAF"). Sector_div() macro has been changed, now the
divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0.

Check if db value can be really counted and replace these macro by
div64_u64() inline.
Signed-off-by: NMariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b0e370b95a3b231d0fb5d1958cce85ef57196fe6 ]

We don't have a reproducible error case, yet our BSP team suggested that
the mmc_switch_status() command in mmc_select_hs400() should come after
the callback into the driver completing HS400 setup. It makes sense to
me because we want the status of a fully setup HS400, so it will
increase the reliability of the mmc_switch_status() command.
Reported-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: ba6c7ac3 ("mmc: core: more fine-grained hooks for HS400 tuning")
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 36815b416fa48766ac5a98e4b2dc3ebc5887222e ]

Permit mux_id values up to 254 to be used in qmimux_register_device()
for compatibility with ip(8) and the rmnet driver.

Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: NReinhard Speyerer <rspmn@arcor.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a8fdde1cb830e560208af42b6c10750137f53eb3 ]

Switch qmimux_unregister_device() and qmi_wwan_disconnect() to
use unregister_netdevice_queue() and unregister_netdevice_many()
instead of unregister_netdevice(). This avoids RCU stalls which
have been observed on device disconnect in certain setups otherwise.

Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: NReinhard Speyerer <rspmn@arcor.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 61356088ace1866a847a727d4d40da7bf00b67fc ]

The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet
driver which does not process QMAP padding in the RX path correctly.
Add support for QMAP padding to qmimux_rx_fixup() according to the
description of the rmnet driver.

Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: NReinhard Speyerer <rspmn@arcor.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe8d9571dc50232b569242fac7ea6332a654f186 ]

Since commit 177366bf the %rbp stopped pointing to %rbp of the
previous stack frame. That broke frame pointer based stack unwinding.
This commit is a partial revert of it.
Note that the location of tail_call_cnt is fixed, since the verifier
enforces MAX_BPF_STACK stack size for programs with tail calls.

Fixes: 177366bf ("bpf: change x86 JITed program stack layout")
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 86723c8640633bee4b4588d3c7784ee7a0032f65 ]

.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net
uses RCU to detect it has setup the resources for tx. The assumption
accidentally broke when introducing bulk queue in devmap.

Fixes: 5d053f9d ("bpf: devmap prepare xdp frames for bulking")
Reported-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NToshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit edabf4d9dd905acd60048ea1579943801e3a4876 ]

dev_map_free() forgot to free bulk queue when freeing its entries.

Fixes: 5d053f9d ("bpf: devmap prepare xdp frames for bulking")
Signed-off-by: NToshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d4dd153d551634683fccf8881f606fa9f3dfa1ef ]

dev_map_free() waits for flush_needed bitmap to be empty in order to
ensure all flush operations have completed before freeing its entries.
However the corresponding clear_bit() was called before using the
entries, so the entries could be used after free.

All access to the entries needs to be done before clearing the bit.
It seems commit a5e2da6e ("bpf: netdev is never null in
__dev_map_flush") accidentally changed the clear_bit() and memory access
order.

Note that the problem happens only in __dev_map_flush(), not in
dev_map_flush_old(). dev_map_flush_old() is called only after nulling
out the corresponding netdev_map entry, so dev_map_free() never frees
the entry thus no such race happens there.

Fixes: a5e2da6e ("bpf: netdev is never null in __dev_map_flush")
Signed-off-by: NToshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f8891461a277ec0afc493fd30cd975a38048a038 ]

It is not a good idea to try to perform any work (e.g. send an auth
frame) during reconfigure flow.

Prevent this from happening, and at the end of the reconfigure flow
requeue all the works.
Signed-off-by: NNaftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ]

In multiple SSID cases, it takes time to prepare every AP interface
to be ready in initializing phase. If a sta already knows everything it
needs to join one of the APs and sends authentication to the AP which
is not fully prepared at this point of time, AP's channel context
could be NULL. As a result, warning message occurs.

Even worse, if the AP is under attack via tools such as MDK3 and massive
authentication requests are received in a very short time, console will
be hung due to kernel warning messages.

WARN_ON_ONCE() could be a better way for indicating warning messages
without duplicate messages to flood the console.

Johannes: We still need to address the underlying problem, but we
          don't really have a good handle on it yet. Suppress the
          worst side-effects for now.
Signed-off-by: NZhi Chen <zhichen@codeaurora.org>
Signed-off-by: NYibo Zhao <yiboz@codeaurora.org>
[johannes: add note, change subject]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 68f2515bb31a664ba3e2bc1eb78dd9f529b10067 ]

The lcdc device is missing the dma_coherent_mask definition causing the
following warning on da850-evm:

da8xx_lcdc da8xx_lcdc.0: found Sharp_LK043T1DG01 panel
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:247 dma_alloc_attrs+0xc8/0x110
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc3-00077-g16d72dd4891f #18
Hardware name: DaVinci DA850/OMAP-L138/AM18x EVM
[<c000fce8>] (unwind_backtrace) from [<c000d900>] (show_stack+0x10/0x14)
[<c000d900>] (show_stack) from [<c001a4f8>] (__warn+0xec/0x114)
[<c001a4f8>] (__warn) from [<c001a634>] (warn_slowpath_null+0x3c/0x48)
[<c001a634>] (warn_slowpath_null) from [<c0065860>] (dma_alloc_attrs+0xc8/0x110)
[<c0065860>] (dma_alloc_attrs) from [<c02820f8>] (fb_probe+0x228/0x5a8)
[<c02820f8>] (fb_probe) from [<c02d3e9c>] (platform_drv_probe+0x48/0x9c)
[<c02d3e9c>] (platform_drv_probe) from [<c02d221c>] (really_probe+0x1d8/0x2d4)
[<c02d221c>] (really_probe) from [<c02d2474>] (driver_probe_device+0x5c/0x168)
[<c02d2474>] (driver_probe_device) from [<c02d2728>] (device_driver_attach+0x58/0x60)
[<c02d2728>] (device_driver_attach) from [<c02d27b0>] (__driver_attach+0x80/0xbc)
[<c02d27b0>] (__driver_attach) from [<c02d047c>] (bus_for_each_dev+0x64/0xb4)
[<c02d047c>] (bus_for_each_dev) from [<c02d1590>] (bus_add_driver+0xe4/0x1d8)
[<c02d1590>] (bus_add_driver) from [<c02d301c>] (driver_register+0x78/0x10c)
[<c02d301c>] (driver_register) from [<c000a5c0>] (do_one_initcall+0x48/0x1bc)
[<c000a5c0>] (do_one_initcall) from [<c05cae6c>] (kernel_init_freeable+0x10c/0x1d8)
[<c05cae6c>] (kernel_init_freeable) from [<c048a000>] (kernel_init+0x8/0xf4)
[<c048a000>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34)
Exception stack(0xc6837fb0 to 0xc6837ff8)
7fa0:                                     00000000 00000000 00000000 00000000
7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 8a8073511be81dd2 ]---

Add a 32-bit mask to the platform device's definition.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0c0c9b5753cd04601b17de09da1ed2885a3b42fe ]

The BB expander at 0x21 i2c bus 1 fails to probe on da850-evm because
the board doesn't set has_full_constraints to true in the regulator
API.

Call regulator_has_full_constraints() at the end of board registration
just like we do in da850-lcdk and da830-evm.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4b14cc313f076c37b646cee06a85f0db59cf216c ]

When PVID is removed from a bridge port, the Linux bridge drops both
untagged and prio-tagged packets. Align mlxsw with this behavior.

Fixes: 148f472d ("mlxsw: reg: Add the Switch Port Acceptable Frame Types register")
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4729ec8c1e1145234aeeebad5d96d77f4ccbb00a ]

kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but vgic_its_destroy() is not currently doing this,
resulting in a memory leak, resulting in kmemleak reports such as
the following:

unreferenced object 0xffff800aeddfe280 (size 128):
  comm "qemu-system-aar", pid 13799, jiffies 4299827317 (age 1569.844s)
  [...]
  backtrace:
    [<00000000a08b80e2>] kmem_cache_alloc+0x178/0x208
    [<00000000dcad2bd3>] kvm_vm_ioctl+0x350/0xbc0

Fix it.

Cc: Andre Przywara <andre.przywara@arm.com>
Fixes: 1085fdc6 ("KVM: arm64: vgic-its: Introduce new KVM ITS device")
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ce9a53eb3dbca89e7ad86673d94ab886e9bea704 ]

There are several scenarios that keyboard can NOT wake up system
from suspend, e.g., if a keyboard is depressed between system
device suspend phase and device noirq suspend phase, the keyboard
ISR will be called and both keyboard depress and release interrupts
will be disabled, then keyboard will no longer be able to wake up
system. Another scenario would be, if a keyboard is kept depressed,
and then system goes into suspend, the expected behavior would be
when keyboard is released, system will be waked up, but current
implementation can NOT achieve that, because both depress and release
interrupts are disabled in ISR, and the event check is still in
progress.

To fix these issues, need to make sure keyboard's depress or release
interrupt is enabled after noirq device suspend phase, this patch
moves the suspend/resume callback to noirq suspend/resume phase, and
enable the corresponding interrupt according to current keyboard status.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d0e1f2110a5eeb6e410b2dd37d98bc5b30da7bc7 ]

In RV32, udelay would delay the wrong cycle. When it shifts right
"UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works
correctly in RV64. Because the 'ucycles' always needs to be 64 bits
variable.
Signed-off-by: NNick Hu <nickhu@andestech.com>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: fixed minor spelling error]
Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 39916897cd815a0ee07ba1f6820cf88a63e459fc ]

Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver
forgot to set dma_parms appropriately. Set it just after vmw_dma_masks()
in vmw_driver_load().

DMA-API: vmwgfx 0000:00:0f.0: mapping sg segment longer than device
claims to support [len=2097152] [max=65536]
WARNING: CPU: 2 PID: 261 at kernel/dma/debug.c:1232
debug_dma_map_sg+0x360/0x480
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 04/13/2018
RIP: 0010:debug_dma_map_sg+0x360/0x480
Call Trace:
 vmw_ttm_map_dma+0x3b1/0x5b0 [vmwgfx]
 vmw_bo_map_dma+0x25/0x30 [vmwgfx]
 vmw_otables_setup+0x2a8/0x750 [vmwgfx]
 vmw_request_device_late+0x78/0xc0 [vmwgfx]
 vmw_request_device+0xee/0x4e0 [vmwgfx]
 vmw_driver_load.cold+0x757/0xd84 [vmwgfx]
 drm_dev_register+0x1ff/0x340 [drm]
 drm_get_pci_dev+0x110/0x290 [drm]
 vmw_probe+0x15/0x20 [vmwgfx]
 local_pci_probe+0x7a/0xc0
 pci_device_probe+0x1b9/0x290
 really_probe+0x1b5/0x630
 driver_probe_device+0xa3/0x1a0
 device_driver_attach+0x94/0xa0
 __driver_attach+0xdd/0x1c0
 bus_for_each_dev+0xfe/0x150
 driver_attach+0x2d/0x40
 bus_add_driver+0x290/0x350
 driver_register+0xdc/0x1d0
 __pci_register_driver+0xda/0xf0
 vmwgfx_init+0x34/0x1000 [vmwgfx]
 do_one_initcall+0xe5/0x40a
 do_init_module+0x10f/0x3a0
 load_module+0x16a5/0x1a40
 __se_sys_finit_module+0x183/0x1c0
 __x64_sys_finit_module+0x43/0x50
 do_syscall_64+0xc8/0x606
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: fb1d9738 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Co-developed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bde15555ba61c7f664f40fd3c6fdbdb63f784c9b ]

When building sg tables, honor the device sg list segment size limitation.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDeepak Rawat <drawat@vmware.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f9364df30420987e77599c4789ec0065c609a507 ]

Get rid of gcc9 warnings like this:

arch/s390/boot/ipl_report.c: In function 'find_bootdata_space':
arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
   42 |  for_each_rb_entry(comp, comps)
      |                          ^~~~~

This is effectively the s390 variant of commit 20c6c189
("x86/boot: Disable the address-of-packed-member compiler warning").
Reviewed-by: NVasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8a0098c05a272c9a68f6885e09755755b612459c ]

Active level of the mmc1 cd gpio needs to be low instead of high.
Fix PCM-953 and phyBOARD-WEGA.
Signed-off-by: NTeresa Remmet <t.remmet@phytec.de>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7c940b1a5291e5069d561f5b8f0e51db6b7a259a ]

The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit be32a24372cf162e825332da1a7ccef058d4f20b ]

It was observed that multicast packets were no longer received after
a device reset.  The fix is to resend the current multicast list to
the backing device after recovery.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1f94608b0ce141be5286dde31270590bdf35b86a ]

Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a9520543b123bbd7275a0ab8d0375a5412683b41 ]

[Resent to net instead of net-next - may clash with Anders Roxell's patch
series addressing duplicate module names]

Commit 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver")
introduced a new PHY driver drivers/net/phy/asix.c that causes a module
name conflict with a pre-existiting driver (drivers/net/usb/asix.c).

The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded
by that driver via its PHY ID. A rename of the driver looks unproblematic.

Rename PHY driver to ax88796b.c in order to resolve name conflict.
Signed-off-by: NMichael Schmitz <schmitzmic@gmail.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Fixes: 31dd83b9 ("net-next: phy: new Asix Electronics PHY driver")
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c5a3aed1cd3152429348ee1fe5cdcca65fe901ce ]

This patch add error path for can_init() to avoid possible crash if some
error occurs.

Fixes: 0d66548a ("[CAN]: Add PF_CAN core module")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3e82f2f34c930a2a0a9e69fdc2de2f2f1388b442 ]

During frame reception while the MCAN is in Error Passive state and the
Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen
that MCAN_IR.MRAF is set although there was no Message RAM access
failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is
generated.

Work around:
The Message RAM Access Failure interrupt routine needs to check whether

    MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.

In this case, reset MCAN_IR.MRAF. No further action is required.
This affects versions older than 3.2.0

Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2

Reproducibility: If 2 devices with m_can are connected back to back,
configuring different bitrate on them will lead to interrupt storm on
the receiving side, with error "Message RAM access failure occurred".
Another way is to have a bad hardware connection. Bad wire connection
can lead to this issue as well.

This patch fixes the issue according to provided workaround.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: NLudovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: NSean Nyekjaer <sean@geanix.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>