- 20 6月, 2018 3 次提交
-
-
由 Arnd Bergmann 提交于
getrawmonotonic64() is deprecated because of the nonstandard naming. The replacement functions ktime_get_raw_ns() also simplifies the callers. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Souptick Joarder 提交于
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f4220 ("mm: change return type to vm_fault_t") Previously vm_insert_{mixed,pfn} returns err which driver mapped into VM_FAULT_* type. The new function vmf_insert_{mixed,pfn} will replace this inefficiency by returning VM_FAULT_* type. Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Souptick Joarder 提交于
Use new return type vm_fault_t for fault handler in vm_operations_struct. Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 6月, 2018 37 次提交
-
-
由 Mikita Lipski 提交于
Initially FBC would be initialized if display's edid was correct and all the modes acquired from it, but n case when edid is corrupted or non-existant we must still initialize FBC. Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Bernstein 提交于
Number of OPPs to be instantiated is based on number of timing generators, not number of pipes. Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Bernstein 提交于
Remove setting DP_DB_DISABLE to avoid issues when changing bit depth after vbios take over. Refactor code to perform single register update for both pixel encoding and component depth fields. Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alvin lee 提交于
Signed-off-by: NAlvin lee <alvin.lee3@amd.com> Reviewed-by: NJun Lei <Jun.Lei@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Vitaly Prosyak 提交于
It is used when curve register settings are generated by 'matlab', i.e. bypass color module calculation. Signed-off-by: NVitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Krunoslav Kovac 提交于
Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Krunoslav Kovac 提交于
Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Krunoslav Kovac 提交于
Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Krunoslav Kovac 提交于
Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
We'd like to use some of them in dc_link_ddc and amdgpu_dm and should have them available in dc_ddc_types.h. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Bernstein 提交于
Update stream encoder based on feedback from HW team. Signed-off-by: NEric Bernstein <eric.bernstein@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mikita Lipski 提交于
Extract edid's checksum and send it back for verification if EDID_TEST is requested. Also added a flag for EDID checksum write in TEST_RESPONSE structure, and simple spelling fix. Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mikita Lipski 提交于
Provide the connector with a single fail-safe mode of 640x480 for CTS tests instead of providing a list of possible base modes. Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Add documentation for missed parameters. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
This was accidentally dropped by the "drm/amdgpu: update documentation for amdgpu_irq.c v3" change, resulting in the GPUVM documentation body being included twice in the generated documentation. Trivial. Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
driver need to know the real power source to do some power related configuration when initialize. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
driver need to update uvd/vce smc table before enable uvd/vce dpm. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
1. move ac_power to struct pm from dpm, so can be shared with powerplay 2. remove power_source in powerplay, use adev->pm.ac_power instand. 3. update ac_power before dispatch power task. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
As the SAMU ip was not supported in linux, so delete the SAMU support in powerplay on asics Bonarire/Hawwii/Tonga/Fiji/Polaris/vegam. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Document the hwmon and power control interfaces exposed by the amdgpu driver. v2: use section rather than chapter for now Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Move all instnaces of this check into a function in amdgpu_gmc.h Rename the original function to a more proper name. v2: Add more places to cleanup. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Slava Abramov 提交于
Add/update function level documentation and add reference to amdgpu_irq.c in amdgpu.rst v2: Added DOC comment Added more explanations for amdgpu_hotplug_work_func Properly formatted unused parameters Properly formatted return values Fixed usage of acronyms More consistent styling v3: Removed duplicate "not" Using '&' to refer to functions and types Signed-off-by: NSlava Abramov <slava.abramov@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Add/update function level documentation and add reference to amdgpu_vm.c in amdgpu.rst v2: Fix reference in rst file. Fix compilation warnings. Add space between function names and params list where it's missing. v3: Fix some funtion comments. Add formatted documentation to structs. Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Slava Abramov 提交于
In doc comments for struct amdgpu_mn: destrution -> destruction Signed-off-by: NSlava Abramov <slava.abramov@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
And wire it up as well. v2: improve the wording, fix label mismatch Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Just a copy&paste leftover from radeon. v2: rebase (Alex) Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
DC has an upcoming change that requires these to read the board layout. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Junwei Zhang 提交于
Don't need validation list any more Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NDavid Zhou <david1.zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 David Panariti 提交于
SQ can generate interrupts and installs the ISR to handle the SQ interrupts. Add parsing SQ data in interrupt handler. v2: Remove CZ only limitation. Rebase. Signed-off-by: NDavid Panariti <David.Panariti@amd.com> Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 David Panariti 提交于
SQ can generate interrupts on EDC/ECC errors and this struct controls how the interrupt is handled. The guts are filled in in the gf_v<major>_<minor>.c files. v2: Rebase. Signed-off-by: NDavid Panariti <David.Panariti@amd.com> Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 David Panariti 提交于
ISR will DRM_ERROR ECC error message. v2: Remove CZ only limitation. Rebase. Signed-off-by: NDavid Panariti <David.Panariti@amd.com> Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Shirish S 提交于
This patch is extends the usage of WB in gfx8's ib test which was originally implemented in the below upstream patch "ed9324af drm/amdgpu: change gfx9 ib test to use WB" For reference below are the reasons for switching to WB: 1)Because when doing IB test we don't want to involve KIQ health status affect, and since SCRATCH register access is go through KIQ that way GFX IB test would failed due to KIQ fail. 2)acccessing SCRATCH register cost much more time than WB method because SCRATCH register access runs through KIQ which at least could begin after GPU world switch back to current Guest VF Signed-off-by: NShirish S <shirish.s@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Emily Deng 提交于
For buffer object that has shadow buffer, need twice commands. Signed-off-by: NEmily Deng <Emily.Deng@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Boyuan Zhang 提交于
Add AMDGPU_HW_IP_VCN_JPEG to queue mgr Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Boyuan Zhang 提交于
Add AMDGPU_HW_IP_VCN_JPEG to info query Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Boyuan Zhang 提交于
Add AMDGPU_HW_IP_VCN_JPEG define for jpeg CS Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-