- 05 12月, 2009 40 次提交
-
-
由 Christof Schmitt 提交于
Introduce kmem_cache for ELS ADISC data to guarantee the required hardware alignment and free the allocated memory in case the send failes. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Remove some redundancies in FC related code and trace: - drop redundant data from SAN trace (local s_id that only changes during link down, ls_code that is already part of payload, d_id in ct response trace that is always the same as in ct request trace) - use one common fsf struct to hold zfcp data for ct and els requests - leverage common fsf struct for FC passthrough job data, allocate it with dd_bsg_data for passthrough requests and unify common code for ct and els passthrough request - simplify callback handling in zfcp_fc Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Instead of assigning 4 bytes with the highest byte masked out, use a 3 byte array with the ntoh24 and h24ton helper functions, thus eliminating the need for the ZFCP_DID_MASK. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The well-known-address (WKA) port handling code is part of the FC code in zfcp. Move everything WKA related to the zfcp_fc files and use the common zfcp_fc prefix for structs and functions. Drop the unused key management service while renaming the struct, no request could ever reach this service in zfcp and it is obsolete anyway. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Use common code definitions for FC GPN_FT and GID_PN instead of inventing private ones. Move the private structs still required inside zfcp to zfcp_fc header file. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Use common code definitions for FC plogi, logo, rscn and adisc structs instead of inventing private ones. Move the private struct for issuing ELS ADISC inside zfcp to zfcp_fc header file. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Use common data structures for FCP CMND, FCP RSP and related definitions and remove zfcp private definitions. Split the FCP CMND setup and FCP RSP evaluation code in seperate functions. Use inline functions to not negatively impact the I/O path. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
If an error occurs that triggers the call to fc_remote_port_delete, ideally this call would happen before any I/O is passed back to the SCSI midlayer through scsi_done. The SCSI midlayer will retry the commands and fc_remote_port_chkready will return the correct status code. But with the delay between calling scsi_done in softirq context and the call to fc_remote_port_delete from the workqueue, there is a window where zfcp returns DID_ERROR. This leads to SCSI error recovery which then leads to offline SCSI devices since all recovery actions will fail with the rport now being blocked. In this window, zfcp has to return DID_IMM_RETRY just as the FC transport class would do in fc_remote_port_chkready for the blocked fc_rport. As soon as the fc_rport is BLOCKED, fc_remote_port_chkready will do the right thing. Additionally, there are two more cases to catch in zfcp_scsi_queuecommand: - After the port has been opened, the unit has to be opened. During this period I/O has to be retried. This can also be handled with DID_IMM_RETRY. - If the access to the unit fails, but the port is good, then this single unit cannot be accessed and I/O to this unit has to fail without involving the FC transport class. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The port_scan work was scheduled to the work_queue provided by the kernel. This resulted on SMP systems to a likely situation that more than one scan_work were processed in parallel. This is not required and openes the possibility of race conditions between the removal of invalid ports and the enqueue of just scanned ports. This patch synchronizes the scan_work tasks by scheduling them to adapter local work_queue. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The flag ZFCP_STATUS_COMMON_REMOVE was used to indicate that a resource is not ready to be used or about to be removed from the system. This is now better done by an improved list handling and therefore the additional indicator is not required anymore. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
With the reference counting for zfcp data structures, it is now possible to implement module unloading again. Module unloading requires to free all data structures in the module exit function. This is done by unregistering zfcp from s390 cio and the SCSI midlayer first in the module exit function. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The latencies traced per fsf request are traced for sysfs output and for blktrace, each in one function. Simplify the tracing code by merging both tracing functions into one. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
When accessing port and unit attributes, use container_of instead of dev_get_drvdata. This eliminates some code checker warnings about aliased access of data structures. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The callback for suspend is not required because it contains exactly the same functionality as the _set_offline routine does. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The global config_mutex was required for the serialization of a configuration change within the zfcp driver. This global locking is now obsolete and can be removed. The requirement of serializing the access to a zfcp_adapter reference via a ccw_device is realized wth a static spinlock. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Replace the local reference counting by already available mechanisms offered by kref. Where possible existing device structures were used, including the same functionality. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The global config_lock was used to protect the configuration organized in independent lists. It is not necessary to have a lock on driver level for this purpose. This patch replaces the global config_lock with a set of local list locks. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
While the target reset task management function has been deprecated in newer specs, it is still in use by SCSI FC drivers and there is no real replacement. Add the target reset flag to the FCP header file to allow usage of this definition in SCSI FC drivers. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
Upon receiving ELS_RLS, send the Link Error Status Block (LESB) back. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
Add a member function pointer as get_lesb to libfc_function_template so LLD can fill the LESB based on its own statistics. For fcoe, it fills the LESB as a fcoe_fc_els_lesb struct according to FC-BB-5. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
Add struct fcoe_fc_els_lesb as described in FC-BB-5 LESB for FCoE. It has the same size as LESB defined in FC-FS-3 (struct fc_els_lesb) but members have different meanings according to FC-BB-5. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
Add tracking the Missing Discovery Advertisement count for FIP Fiber Channel Forwarder (FCF) as described in FC-BB-5 Rev2.0 for LESB. The time is 1.5 times the FKA_ADV_PERIOD of the corresponding FCF. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
Add tracking the Virtual Link Failure count when either we have found the FCF as "aged" or we are receiving FIP Clear Virtual Link from the FCF. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
When the D bit is set if the FKA_ADV_Period of the FIP Discovery Advertisement, the ENode should not transmit period ENode FIP Keep Alive and VN_Port FIP Keep Alive (FC-BB-5 Rev2, 7.8.3.13). Note that fcf->flags is taken directly from the fip_header, I am claiming one bit for the purpose of the FIP_FKA_Period D bit as FIP_FL_FK_ADV_B, and use FIP_HEADER_FLAGS as bitmask for bits used in fip_header. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
FC-BB-5 Rev2.0, Clause 7.10 extends the FC-LS-3 LESB for FC-BB_E. We are already tracking Link Failure Count so add the rest in this patch. For VLinkFailureCount and MissDiscAdvCount, they are part of the per-cpu fcoe_dev_stats. For SymbolErrorCount, ErroredBlockCount, and FCSErrorCount, they are defined in IEEE 802.3-2008 and are per LLD. They are expected to come from LLD. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Chris Leech 提交于
Allow FCP frames to bypass the FCoE receive processing threads and handle them directly in softirq context, if they are received on the correct CPU. This preserves the queuing to threads for scaling out receive processing to multiple CPUs, but allows FCoE-aware multi-queue network drivers that direct frames to the originating CPUs to handle FCP processing with less scheduling latency. Only FCP is handled directly, because libfc makes use of mutexes in ELS handling routines. The bulk of this change is just moving the FCoE receive processing out of the receive thread function, leaving behind just the thread and queue management. The interesting bits are in fcoe_rcv() Signed-off-by: NChris Leech <christopher.leech@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Yi Zou 提交于
Frame header room is already incluced, just pass the length of payload. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Hardware related Fixes and Changes. - Added new Adapter IDs and update default Adapter names. - Added PCI read after EQarm doorbell PCI write to flush the write and avoid spurrious interrupts when in INTx mode. - Phase out use of ONLINE registers. - Fix for lost MSI interrupt Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Fix errors relating to crashes and hangs. - Fix crash due to list corruption while unloading driver. - Fix panic during pci-hot-plug testing. - Fix panic when unmapping luns. - Fixed total_scsi_bufs counting could cause exhausted memory. - Fixed locking issue causing hang. - Fixed the call from lpfc_new_scsi_buf_s3 to use lpfc_release_scsi_buf_s3. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
Fix AER issues. - Made AER sysfs entry point return "Operation not permitted" to OneConnect HBAs - Stop and abort all I/Os on HBA for AER uncorrectable non-fatal error handling Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
FC protocol fixes. - Fix send sequence logic to handle multi SGL IOCBs. - Fix FDISC completion always setting VPORT state to failed. - Ported the fix on reporting of max_vpi to uppper layer. - Fix incorrect number of Vports allowed to be created. - Fixed Dead FCoE port after creating vports. - Added handling of ELS request for Reinstate Recovery Qualifier (RRQ) - Handle unsolicited CT exchange initiator receiving CT exchange ABTS - Migrate LUN queue depth ramp up code to scsi mid-layer. - Made ABTS WQE go to the same WQ as the WQE to be aborted. - Fix Vport does not rediscover after FCF goes away. - Fixed lpfc_unreg_vfi failure after devloss timeout. - Fixed RPI bit leak. - Fix hbq pointer corruption during target discovery. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
FCoE Protocol fixes. - Fixed FIP frame designation for ELS commands. - Fix CVL received on Port 1 not processed by driver. - Fix Zeroed frame on wire after FLOGI - Fix vport keep-alive does not contain the correct WWN. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Roel Kluin 提交于
value cannot logically be less than START and greater than BUFFERSIZE. #define EXTENDED_SENSE_START 18 // vi include/scsi/scsi_cmnd.h +105 #define SCSI_SENSE_BUFFERSIZE 96 [akpm@linux-foundation.org: fix warning] Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NKai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Randy Dunlap 提交于
Fix scsi_devinfo.c kernel-doc function names to match actual function names. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Martin Michlmayr 提交于
include/scsi/osd_protocol.h uses ALIGN() without an #include <linux/kernel.h>, leading to: | include/scsi/osd_protocol.h:362: error: implicit declaration of function 'ALIGN' Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Boaz Harrosh 提交于
Administer some love to the osd_req_decode_sense function * Fix a bad bug with osd_req_decode_sense(). If there was no scsi residual, .i.e the request never reached the target, then all the osd_sense_info members where garbage. * Add grossly missing in/out_resid to osd_sense_info and fill them in properly. * Define an osd_err_priority enum which divides the possible errors into 7 categories in ascending severity. Each category is also assigned a Linux return code translation. Analyze the different osd/scsi/block returned errors and set the proper osd_err_priority and Linux return code accordingly. * extra check a few situations so not to get stuck with inconsistent error view. Example an empty residual with an error code, and other places ... Lots of libosd's osd_req_decode_sense clients had this logic in some form or another. Consolidate all these into one place that should actually know about osd returns. Thous translating it to a more abstract error. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Boaz Harrosh 提交于
When an error was detected in an attribute list do to a target bug. We would print an error but spin endlessly regardless. Fix it. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Boaz Harrosh 提交于
The (never tested) osd_sense_attribute_identification case has never worked. The loop was never advanced on. Fix it to work as intended. On 10/30/2009 04:39 PM, Roel Kluin wrote: I found this by code analysis, searching for while loops that test a local variable, but do not modify the variable. Reported-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Boaz Harrosh 提交于
Define an osd_dev_info structure that Uniquely identifies an OSD device lun on the network. The identification is built from unique target attributes and is the same for all network/SAN machines. osduld_info_lookup() - NEW New API that will lookup an osd_dev by its osd_dev_info. This is used by pNFS-objects for cross network global device identification. And by exofs multy-device support, the device info is specified in the on-disk exofs device table. osduld_device_info() - NEW Given an osd_dev handle returns its associated osd_dev_info. The ULD fetches this information at startup and hangs it on each OSD device. (This is a fast operation that can be called at any condition) osduld_device_same() - NEW With a given osd_dev at one hand and an osd_dev_info at another, we would like to know if they are the same device. Two osd_dev handles can be checked by: osduld_device_same(od1, osduld_device_info(od2)); osd_auto_detect_ver() - REVISED Now returns an osd_dev_info structure. Is only called once by ULD as before. See added comments for how to use. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-