Set crtc panel info at init phase. Setting it at prepare callback does
it multiple times for no good reason and it is also too late when atomic
modeset is used.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Remove tilcdc_verify_fb(). The tilcdc_verify_fb() function is not
needed because the same checks are implemented in
tilcdc_plane_atomic_check().
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Remove obsolete crtc helper functions. These are not needed when
atomic modeset is used.

Note that the drm_crtc_helper_funcs mode_fixup() is still needed. The
crtc's check() callback can not do its job here.

The plane's check() callback needs to set drm_crtc_state's
->mode_changed to true if the pixel format for the framebuffer
changes. Because of this drm_mode_config_funcs atomic_check() callback
needs to call drm_atomic_helper_check_modeset() once more after it has
called drm_atomic_helper_check_planes(). If the fixing of the
adjusted_mode would be done in drm_crtc_helper_funcs atomic_check()
callback, it would get over written by the extra
drm_atomic_helper_check_modeset() call.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Set DRIVER_ATOMIC and use atomic helpers and rename commit and prepare
crtc helpers to enable and disable. This makes the final jump to mode
setting, but there is lot of obsolete code to clean up.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Add drm_mode_config_reset() call to tilcdc_load(). This is need to
initialize atomic state variables at load time.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Add atomic mode config funcs. The atomic_commit implementation is a
copy-paste from drm_atomic_helper_commit(), leaving out the async
test. The similar copy-paste implementation appears to be used in many
other drivers too. The standard drm_atomic_helper_check() is used for
checking.

The drm_atomic_helper_check() can not be used in drm_mode_config_funcs
atomic_check() callback because the plane's check implementation may
update crtc state's ->mode_changed flag. Because of this the
drm_atomic_helper_check_modeset() has to be called once more after
drm_atomic_helper_check_planes() (see drm_atomic_helper_check_modeset()
documentation).
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Add tilcdc_crtc_atomic_check(). Checks the display mode validity and
the presence of the mandatory primary plane.

The drm_crtc_helper_funcs mode_fixup() callback is left untouched and
the check function does no try to do its job on purpose, despite what
the mode_fixup() callback's documentations suggests.

The plane's check() callback needs to set drm_crtc_state's
->mode_changed to true if the pixel format for the framebuffer
changes. Because of this drm_mode_config_funcs atomic_check() callback
needs to call drm_atomic_helper_check_modeset() once more after it has
called drm_atomic_helper_check_planes(). If the fixing of the
adjusted_mode would be done in drm_crtc_helper_funcs atomic_check()
callback, it would get over written by the extra
drm_atomic_helper_check_modeset() call.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Add tilcdc_crtc_mode_set_nofb(). The mode_set_nofb() semantics do not
fit well to LCDC, because of the mandatory framebuffer. However, when
the primary plane is required in the check phase, it and the
framebuffer can be found from the atomic state struct.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Initialize dummy primary plane from crtc init.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Add dummy primary plane implementation. LCDC does not really have
planes, only simple framebuffer that is mandatory. This primary plane
implementation has the necessary checks for implementing simple
framebuffer trough DRM plane abstraction. For setting the actual
framebuffer the implementation relies on a CRTC side function.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Make tilcdc_crtc_page_flip() work if crtc is not yet on. The plane
commit sometimes comes before crtc is turned on. The new framebuffer
should be set to scanout also in that case, so that it is there when
crtc is turned on at the end of the commit phase.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Make tilcdc_crtc_page_flip() public for dummy plane implementation to use.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Fix tilcdc component master unloading. If a subcomponent module
(tda998x in this case) is unloaded before its master (tilcdc in this
case), it calls drm_put_dev() and it should not be called again by
the master when its module is unloaded. However component_master_del()
must still be called and the check if the drm_put_dev() has been
called must be in component_master_ops unbind() callback, not in
platform_driver remove() callback.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Avoid error print by of_graph_get_next_endpoint() if there is no ports
present.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

The legacy panel.txt and tfp410.txt bindings are still the only supported
way to connect lcd panel and tfp410 DVI encoder to tilcdc.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Add drm_crtc_vblank_on() and *_off() calls to start() and stop()
functions, to make sure any vblank waits etc. gets properly cleaned
up.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Increase time out for waiting frame done interrupt. 50ms is long
enough for the usual display modes (50 Hz or higher refresh rate), but
it may be a bit tight for some unusual mode.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Move wait queue waiting of LCDC_FRAME_DONE IRQ from tilcdc_crtc_dpms()
into stop() function. This is just a cleanup and enables independent
use of stop() function.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Reorder the IRQ function so that the write to LCDC_END_OF_INT_IND_REG
is done last. The write to LCDC_END_OF_INT_IND_REG indicates to LCDC
that the interrupt service routine has completed (see section
13.3.6.1.6 in AM335x TRM). This is needed if LCDC's ipgvmodirq module
is configured for pulse interrupts.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Move LCDC_SYNC_LOST handling inside if (ver == 2) statement.
LCDC_SYNC_LOST interrupt status bit is only defined for version 2
silicon.
Signed-off-by: NJyri Sarha <jsarha@ti.com>

Restore old dpms state in pm_resume(). The dpms is turned off in
pm_suspend() and it should be restored to its original state in
pm_resume(). Without this patch the display is left blanked after a
suspend/resume cycle.

Fixes commit 614b3cfe ("drm/tilcdc: disable the lcd controller/dma
engine when suspend invoked")
Signed-off-by: NJyri Sarha <jsarha@ti.com>

drm_connector_register_all requires a few too many locks because our
connector_list locking is busted. Add another FIXME+hack to work
around this. This should address the below lockdep splat:

======================================================
[ INFO: possible circular locking dependency detected ]
4.7.0-rc5+ #524 Tainted: G           O
-------------------------------------------------------
kworker/u8:0/6 is trying to acquire lock:
 (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120

but task is already holding lock:
 ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 ((fb_notifier_list).rwsem){++++.+}:
       [<ffffffff810df611>] lock_acquire+0xb1/0x200
       [<ffffffff819a55b4>] down_write+0x44/0x80
       [<ffffffff810abf91>] blocking_notifier_chain_register+0x21/0xb0
       [<ffffffff814c7448>] fb_register_client+0x18/0x20
       [<ffffffff814c6c86>] backlight_device_register+0x136/0x260
       [<ffffffffa0127eb2>] intel_backlight_device_register+0xa2/0x160 [i915]
       [<ffffffffa00f46be>] intel_connector_register+0xe/0x10 [i915]
       [<ffffffffa0112bfb>] intel_dp_connector_register+0x1b/0x80 [i915]
       [<ffffffff8159dfea>] drm_connector_register+0x4a/0x80
       [<ffffffff8159fe44>] drm_connector_register_all+0x64/0xf0
       [<ffffffff815a2a64>] drm_modeset_register_all+0x174/0x1c0
       [<ffffffff81599b72>] drm_dev_register+0xc2/0xd0
       [<ffffffffa00621d7>] i915_driver_load+0x1547/0x2200 [i915]
       [<ffffffffa006d80f>] i915_pci_probe+0x4f/0x70 [i915]
       [<ffffffff814a2135>] local_pci_probe+0x45/0xa0
       [<ffffffff814a349b>] pci_device_probe+0xdb/0x130
       [<ffffffff815c07e3>] driver_probe_device+0x223/0x440
       [<ffffffff815c0ad5>] __driver_attach+0xd5/0x100
       [<ffffffff815be386>] bus_for_each_dev+0x66/0xa0
       [<ffffffff815c002e>] driver_attach+0x1e/0x20
       [<ffffffff815bf9be>] bus_add_driver+0x1ee/0x280
       [<ffffffff815c1810>] driver_register+0x60/0xe0
       [<ffffffff814a1a10>] __pci_register_driver+0x60/0x70
       [<ffffffffa01a905b>] i915_init+0x5b/0x62 [i915]
       [<ffffffff8100042d>] do_one_initcall+0x3d/0x150
       [<ffffffff811a935b>] do_init_module+0x5f/0x1d9
       [<ffffffff81124416>] load_module+0x20e6/0x27e0
       [<ffffffff81124d63>] SYSC_finit_module+0xc3/0xf0
       [<ffffffff81124dae>] SyS_finit_module+0xe/0x10
       [<ffffffff819a83a9>] entry_SYSCALL_64_fastpath+0x1c/0xac

-> #0 (&dev->mode_config.mutex){+.+.+.}:
       [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260
       [<ffffffff810df611>] lock_acquire+0xb1/0x200
       [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0
       [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120
       [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80
       [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50
       [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915]
       [<ffffffff814c13c6>] fbcon_init+0x586/0x610
       [<ffffffff8154d16a>] visual_init+0xca/0x130
       [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0
       [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180
       [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0
       [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750
       [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0
       [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70
       [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20
       [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20
       [<ffffffff814c86b1>] register_framebuffer+0x251/0x330
       [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0
       [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915]
       [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150
       [<ffffffff810a3947>] process_one_work+0x1e7/0x750
       [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0
       [<ffffffff810aad4f>] kthread+0xef/0x110
       [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock((fb_notifier_list).rwsem);
                               lock(&dev->mode_config.mutex);
                               lock((fb_notifier_list).rwsem);
  lock(&dev->mode_config.mutex);

 *** DEADLOCK ***

6 locks held by kworker/u8:0/6:
 #0:  ("events_unbound"){.+.+.+}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750
 #1:  ((&entry->work)){+.+.+.}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750
 #2:  (registration_lock){+.+.+.}, at: [<ffffffff814c8487>] register_framebuffer+0x27/0x330
 #3:  (console_lock){+.+.+.}, at: [<ffffffff814c86ce>] register_framebuffer+0x26e/0x330
 #4:  (&fb_info->lock){+.+.+.}, at: [<ffffffff814c78dd>] lock_fb_info+0x1d/0x40
 #5:  ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70

stack backtrace:
CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G           O    4.7.0-rc5+ #524
Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B33.1606250842 06/25/2016
Workqueue: events_unbound async_run_entry_fn
 0000000000000000 ffff8800758577f0 ffffffff814507a5 ffffffff828b9900
 ffffffff828b9900 ffff880075857830 ffffffff810dc6fa ffff880075857880
 ffff88007584d688 0000000000000005 0000000000000006 ffff88007584d6b0
Call Trace:
 [<ffffffff814507a5>] dump_stack+0x67/0x92
 [<ffffffff810dc6fa>] print_circular_bug+0x1aa/0x200
 [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260
 [<ffffffff810df611>] lock_acquire+0xb1/0x200
 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0
 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120
 [<ffffffff810fa85f>] ? rcu_read_lock_sched_held+0x7f/0x90
 [<ffffffff81208218>] ? kmem_cache_alloc_trace+0x248/0x2b0
 [<ffffffff815afdc5>] ? drm_modeset_lock_all+0x25/0x120
 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120
 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80
 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50
 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915]
 [<ffffffff814c13c6>] fbcon_init+0x586/0x610
 [<ffffffff8154d16a>] visual_init+0xca/0x130
 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0
 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180
 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0
 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750
 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0
 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70
 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20
 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330
 [<ffffffff815b7e8d>] ? vga_switcheroo_client_fb_set+0x5d/0x70
 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0
 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915]
 [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150
 [<ffffffff810a3947>] process_one_work+0x1e7/0x750
 [<ffffffff810a38c9>] ? process_one_work+0x169/0x750
 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0
 [<ffffffff810a3eb0>] ? process_one_work+0x750/0x750
 [<ffffffff810aad4f>] kthread+0xef/0x110
 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40
 [<ffffffff810aac60>] ? kthread_stop+0x2e0/0x2e0

v2: Rebase onto the right branch (hand-editing patches ftw) and add more
reporters.
Reported-by: NImre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reported-by: NJiri Kosina <jikos@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The conversion of the rcar-du driver from the I2C slave encoder to the
DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing
the bridge from being handled automatically by the DRM core. Fix it.

Fixes: 1d926114 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder")
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pull more block fixes from Jens Axboe:
 "As mentioned in the pull the other day, a few more fixes for this
  round, all related to the bio op changes in this series.

  Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf.  I
  wanted to do that change right after or right before -rc1, so that
  risk of conflict was reduced.  I just rebased the series on top of
  current master, and no new ->bi_rw usage has snuck in"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: rename bio bi_rw to bi_opf
  target: iblock_execute_sync_cache() should use bio_set_op_attrs()
  mm: make __swap_writepage() use bio_set_op_attrs()
  block/mm: make bdev_ops->rw_page() take a bool for read/write

Pull drm zpos property support from Dave Airlie:
 "This tree was waiting on some media stuff I hadn't had time to get a
  stable branchpoint off, so I just waited until it was all in your tree
  first.

  It's been around a bit on the list and shouldn't affect anything
  outside adding the generic API and moving some ARM drivers to using
  it"

* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
  drm: rcar: use generic code for managing zpos plane property
  drm/exynos: use generic code for managing zpos plane property
  drm: sti: use generic zpos for plane
  drm: add generic zpos property

Since commit 63a4cc24, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.
Signed-off-by: NJens Axboe <axboe@fb.com>

The original commit missed this function, it needs to mark it a
write flush.

Cc: Mike Christie <mchristi@redhat.com>
Fixes: e742fc32 ("target: use bio op accessors")
Signed-off-by: NJens Axboe <axboe@fb.com>

Cleaner than manipulating bio->bi_rw flags directly.
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit abf54548 changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.

Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Pull documentation fixes from Jonathan Corbet:
 "Three fixes for the docs build, including removing an annoying warning
  on 'make help' if sphinx isn't present"

* tag 'doc-4.8-fixes' of git://git.lwn.net/linux:
  DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1
  Documenation: update cgroup's document path
  Documentation/sphinx: do not warn about missing tools in 'make help'

Pull binfmt_misc update from James Bottomley:
 "This update is to allow architecture emulation containers to function
  such that the emulation binary can be housed outside the container
  itself.  The container and fs parts both have acks from relevant
  experts.

  To use the new feature you have to add an F option to your binfmt_misc
  configuration"

From the docs:
 "The usual behaviour of binfmt_misc is to spawn the binary lazily when
  the misc format file is invoked.  However, this doesn't work very well
  in the face of mount namespaces and changeroots, so the F mode opens
  the binary as soon as the emulation is installed and uses the opened
  image to spawn the emulator, meaning it is always available once
  installed, regardless of how the environment changes"

* tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc:
  binfmt_misc: add F option description to documentation
  binfmt_misc: add persistent opened binary handler for containers
  fs: add filp_clone_open API

In most cases, EPERM is returned on immutable inode, and there're only a
few places returning EACCES. I noticed this when running LTP on
overlayfs, setxattr03 failed due to unexpected EACCES on immutable
inode.

So converting all EACCES to EPERM on immutable inode.
Acked-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NEryu Guan <guaneryu@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more vfs updates from Al Viro:
 "Assorted cleanups and fixes.

  In the "trivial API change" department - ->d_compare() losing 'parent'
  argument"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cachefiles: Fix race between inactivating and culling a cache object
  9p: use clone_fid()
  9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()"
  vfs: make dentry_needs_remove_privs() internal
  vfs: remove file_needs_remove_privs()
  vfs: fix deadlock in file_remove_privs() on overlayfs
  get rid of 'parent' argument of ->d_compare()
  cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare()
  affs ->d_compare(): don't bother with ->d_inode
  fold _d_rehash() and __d_rehash() together
  fold dentry_rcuwalk_invalidate() into its only remaining caller

Merge tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull more xfs updates from Dave Chinner:
 "This is the second part of the XFS updates for this merge cycle, and
  contains the new reverse block mapping feature for XFS.

  Reverse mapping allows us to track the owner of a specific block on
  disk precisely.  It is implemented as a set of btrees (one per
  allocation group) that track the owners of allocated extents.
  Effectively it is a "used space tree" that is updated when we allocate
  or free extents.  i.e. it is coherent with the free space btrees we
  already maintain and never overlaps with them.

  This reverse mapping infrastructure is the building block of several
  upcoming features - reflink, copy-on-write data, dedupe, online
  metadata and data scrubbing, highly accurate bad sector/data loss
  reporting to users, and significantly improved reconstruction of
  damaged and corrupted filesystems.  There's a lot of new stuff coming
  along in the next couple of cycles,a nd it all builds in the rmap
  infrastructure.

  As such, it's a huge chunk of new code with new on-disk format
  features and internal infrastructure.  It warns at mount time as an
  experimental feature and that it may eat data (as we do with all new
  on-disk features until they stabilise).  We have not released
  userspace suport for it yet - userspace support currently requires
  download from Darrick's xfsprogs repo and build from source, so the
  access to this feature is really developer/tester only at this point.
  Initial userspace support will be released at the same time kernel
  with this code in it is released.

  The new rmap enabled code regresses 3 xfstests - all are ENOSPC
  related corner cases, one of which Darrick posted a fix for a few
  hours ago.  The other two are fixed by infrastructure that is part of
  the upcoming reflink patchset.  This new ENOSPC infrastructure
  requires a on-disk format tweak required to keep mount times in
  check - we need to keep an on-disk count of allocated rmapbt blocks so
  we don't have to scan the entire btrees at mount time to count them.

  This is currently being tested and will be part of the fixes sent in
  the next week or two so users will not be exposed to this change"

* tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits)
  xfs: move (and rename) the deferred bmap-free tracepoints
  xfs: collapse single use static functions
  xfs: remove unnecessary parentheses from log redo item recovery functions
  xfs: remove the extents array from the rmap update done log item
  xfs: in btree_lshift, only allocate temporary cursor when needed
  xfs: remove unnecesary lshift/rshift key initialization
  xfs: remove the get*keys and update_keys btree ops pointers
  xfs: enable the rmap btree functionality
  xfs: don't update rmapbt when fixing agfl
  xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled
  xfs: add rmap btree block detection to log recovery
  xfs: add rmap btree geometry feature flag
  xfs: propagate bmap updates to rmapbt
  xfs: enable the xfs_defer mechanism to process rmaps to update
  xfs: log rmap intent items
  xfs: create rmap update intent log items
  xfs: add rmap btree insert and delete helpers
  xfs: convert unwritten status of reverse mappings
  xfs: remove an extent from the rmap btree
  xfs: add an extent to the rmap btree
  ...

Pull qstr constification updates from Al Viro:
 "Fairly self-contained bunch - surprising lot of places passes struct
  qstr * as an argument when const struct qstr * would suffice; it
  complicates analysis for no good reason.

  I'd prefer to feed that separately from the assorted fixes (those are
  in #for-linus and with somewhat trickier topology)"

* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qstr: constify instances in adfs
  qstr: constify instances in lustre
  qstr: constify instances in f2fs
  qstr: constify instances in ext2
  qstr: constify instances in vfat
  qstr: constify instances in procfs
  qstr: constify instances in fuse
  qstr constify instances in fs/dcache.c
  qstr: constify instances in nfs
  qstr: constify instances in ocfs2
  qstr: constify instances in autofs4
  qstr: constify instances in hfs
  qstr: constify instances in hfsplus
  qstr: constify instances in logfs
  qstr: constify dentry_init_security

Pull mailcap fixlets from Mauro Carvalho Chehab:
 "A small fixup for my and Shuah's entries in .mailcap.

  Basically, those entries were with a syntax that makes
  get_maintainer.pl to do the wrong thing"

* tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  .mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan

Pull virtio/vhost updates from Michael Tsirkin:

 - new vsock device support in host and guest

 - platform IOMMU support in host and guest, including compatibility
   quirks for legacy systems.

 - misc fixes and cleanups.

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  VSOCK: Use kvfree()
  vhost: split out vringh Kconfig
  vhost: detect 32 bit integer wrap around
  vhost: new device IOTLB API
  vhost: drop vringh dependency
  vhost: convert pre sorted vhost memory array to interval tree
  vhost: introduce vhost memory accessors
  VSOCK: Add Makefile and Kconfig
  VSOCK: Introduce vhost_vsock.ko
  VSOCK: Introduce virtio_transport.ko
  VSOCK: Introduce virtio_vsock_common.ko
  VSOCK: defer sock removal to transports
  VSOCK: transport-specific vsock_transport functions
  vhost: drop vringh dependency
  vop: pull in vhost Kconfig
  virtio: new feature to detect IOMMU device quirk
  balloon: check the number of available pages in leak balloon
  vhost: lockless enqueuing
  vhost: simplify work flushing

Pull more KVM updates from Paolo Bonzini:
 - ARM bugfix and MSI injection support
 - x86 nested virt tweak and OOPS fix
 - Simplify pvclock code (vdso bits acked by Andy Lutomirski).

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  nvmx: mark ept single context invalidation as supported
  nvmx: remove comment about missing nested vpid support
  KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
  KVM: documentation: fix KVM_CAP_X2APIC_API information
  x86: vdso: use __pvclock_read_cycles
  pvclock: introduce seqcount-like API
  arm64: KVM: Set cpsr before spsr on fault injection
  KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
  KVM: arm/arm64: Enable MSI routing
  KVM: arm/arm64: Enable irqchip routing
  KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
  KVM: irqchip: Convey devid to kvm_set_msi
  KVM: Add devid in kvm_kernel_irq_routing_entry
  KVM: api: Pass the devid in the msi routing entry

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...