The patch 2080913e: "staging: r8712u: Fix regression caused by
commit 8c213fa5" from Feb 25, 2012, leads to the following Smatch
complaint:

drivers/staging/rtl8712/usb_intf.c:629 r871xu_dev_remove()
	 warn: variable dereferenced before check 'padapter' (see line 625)

The fix is to move the new statements inside the block where padapter
is not NULL.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the SPARSEMEM from the zsmalloc
Kconfig
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch ensures that the value of ZS_MIN_ALLOC_SIZE, for the
PAGE_SIZE and MAX_PHYSMEM_BITS on the system, allows for all
possible object ids in the lowest storage class to be encoded
in the object handle.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch provides a way to determine or "set a
reasonable value for" MAX_PHYSMEM_BITS in the case that
it is not defined (i.e. !SPARSEMEM)
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves where max_zspage_order is declared and
changes its meaning.  "Order" typically implies 2^order
of something; however, it is currently being used as the
"maximum number of single pages in a zspage".  To add clarity,
ZS_MAX_ZSPAGE_ORDER is now used to calculate ZS_MAX_PAGES_PER_ZSPAGE,
which is 2^ZS_MAX_ZSPAGE_ORDER and is the upper bound on the number
of pages in a zspage.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves the definitions of _PFN_BITS, OBJ_INDEX_BITS
and OBJ_INDEX_MASK from zsmalloc-main.c to zsmalloc_int.h

They will be needed to determine ZS_MIN_ALLOC_SIZE in the next
patch
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache cannot currently be loaded as a module.  However
the Kconfig allows it to be built as a module; something that
the user probably does not intend since the module is not
loadable.

This patch switches zcache from a tristate to a bool in the Kconfig
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e553f182 ("staging: iio: core: Introduce debugfs support, add support
for direct register access") added a '#if defined(CONFIG_DEBUG_FS)' around
iio_read_channel_ext_info and iio_write_channel_ext_info causing the following
compile error if CONFIG_DEBUG_FS is not defined.

	drivers/staging/iio/industrialio-core.c:621:11: error: 'iio_read_channel_ext_info' undeclared (first use in this function)
	drivers/staging/iio/industrialio-core.c:623:11: error: 'iio_write_channel_ext_info' undeclared (first use in this function)

This patch fixes the issue by moving the functions out of the '#if
defined(CONFIG_DEBUG_FS)' section again.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix compiler warning about the type of the module parameter.

Cc: San Mehat <san@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The lowmemorykiller registers an atomic notifier for notfication of when
the task is freed.  From this atomic notifier callback, it removes the
atomic notifier via task_free_unregister().  This is incorrect because
atomic_notifier_chain_unregister() calls syncronize_rcu(), which can
sleep, which shouldn't be done from an atomic notifier.

Fix this by registering the notifier during init, and only unregister it
if the lowmemorykiller is unloaded.

Rebased to -next by Paul E. McKenney.
Rebased to -next again by Anton Vorontsov.
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: NChristian Bejram <christian.bejram@stericsson.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

GCC warns that module_param_named() indirectly returns a bool type value
which is different from 'int' type binder_debug_no_lock declared. Change
it to bool because it is a internal switch for debugging.
Signed-off-by: NZhengwang Ruan <ruan.zhengwang@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The kernel already has a debug allocator, no need to have one unique to
a single driver.  So delete it, replace with kfree, kmalloc, and, in a
few places that need it, kzalloc().

Cc: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Memory is being allocated by kmalloc and stored in
variable pstAddIndication.  However, this memory is
not being freed in all cases. Therefore, this patch
frees it on several exit paths. This patch also
removes a whitespace.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It seems the USB device ID 0bda:8192 is wrongly assigned to the
RTL8192SU chip and not to the RTL8191SU chip in the USB database.
So this patch moves this device ID from the rtl8192u staging
driver to the rtl8712 staging driver.

This patch was tested with a Radicom WIFIHU embedded wireless
module with a RTL8191SU chip and the USB device ID 0bda:8192.
Without the patch the rtl8192u driver claims this device, but
it does not work. With the patch the rtl8712 driver services
this device and it works.
Signed-off-by: NMartin Krause <martin.krause@tqs.de>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove copies of the double USB device IDs:

- 0bda:8172
- 0bda:8174
Signed-off-by: NMartin Krause <martin.krause@tqs.de>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No functional changes.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers may not need setup_ops at all, so let the core supply
some empty ops.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changes since V1:

Exclude iio debugfs code in case CONFIG_DEBUG_FS isn't enabled.
	Introduce helper function iio_get_debugfs_dentry.
	Document additions to struct iio_dev

iio_debugfs_read_reg:
	Use snprintf.
	Use a shorter fixed length.
	Introduce len instead of pointer math.

iio_debugfs_write_reg:
	Fix return value use PT_ERR.

Changes since V2:

Use debugfs_remove.
Fix whitespace damage.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes some comments and some typos that I have found
while reading drivers/staging/iio/*
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

app_id comes from the network and can't be trusted.  If it's zero then
it will lead to a kernel crash.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NChris Kelly <ckelly@ozmodevices.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Added TODO file for ozwpan driver.
Signed-off-by: NChris Kelly <ckelly@ozmodevices.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit c6dc001f "staging: r8712u: Merging Realtek's latest (v2.6.6).
Various fixes", the returned qual.qual member of the iw_statistics
struct was changed. For strong signals, this change made no difference;
however for medium and weak signals it results in a low signal that
shows considerable fluctuation, When using wicd for a medium-strength
AP, the value reported in the status line is reduced from 100% to 60% by
this bug.

This problem is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42826.
Reported-and-tested-by: NRobert Crawford <wrc1944@gmail.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 8c213fa5 "staging: r8712u: Use asynchronous firmware loading",
the command to release the firmware was placed in the wrong routine.

In combination with the bug introduced in commit a5ee6529 "staging: r8712u:
Interface-state not fully tracked", the driver attempts to upload firmware
that had already been released. This bug is the source of one of the
problems in https://bugs.archlinux.org/task/27996#comment89833.
Tested-by: NAlberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: NAdrian <agib@gmx.de>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit a5ee6529 "staging: r8712u: Interface-state not fully tracked",
the private boolean "bup" was set false when the interface was brought down,
as that seemed appropriate. This change has not caused any problems when
using NetworkManager or manual control of the device; however, when wicd
control is used, there is a locking problem in wpa_supplicant, as shown in
https://bugzilla.kernel.org/show_bug.cgi?id=42818.

This fix reverts the only code change in commit a5ee6529. My
analysis is that "bup" is badly named. In its present form, it
seems to indicate the up/down state of the device, but its usage
is more consistent with an initialized/uninitialized state. That
problem will be addressed in a later patch.

Note: Commit 8c213fa5, which introdued asynchronous firmware loading
for this driver, exposed this bug to a greater extent. That bug
is addressed in the next patch in this series.

This bug is also responsible for the bug in
https://bugzilla.kernel.org/show_bug.cgi?id=42815. and this bug is
also part of the problems discussed at https://bugs.archlinux.org/task/27996#comment89950.
Tested-by: NAlberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: NAdrian <agib@gmx.de>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.2+]
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 1ca1a92c "Staging: wlan-ng: memsetting the wrong amount of
data" I changed the code so we didn't memset() past the end of the
msg1.bssid.data[] array.  Walter Harms noticed that it was weird that
we were setting the len to 6 when there were 7 elements in the array.
Pavel Roskin pointed out that the intent of the code was actually to
memset() msg1.bssid.data.data[] which is a 6 character array.
Reported-by: NWalter Harms <wharms@bfs.de>
Reported-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The header bc_dts_types is not used, so we can remove it.
Signed-off-by: NJorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces the local includes with the global header.
So the the crystalhd.h will be the only header included by the other files.
Signed-off-by: NJorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In the crystalhd_cmds.h there was a struct dependence bug:
the struct crystalhd_adp (which  is declared on crystalhd_lnx.h)
is used on  the crystalhd_cmd struct, however the crystalhd_lnx.h is
never included on crystalhd_cmds.h at all. Including the
crystalhd_lnx.h on crystalhd_cmds.h breaks the build,
many dependencies error occurrs, most of the type
"error: 'struct bar' has no member named 'foo'",
so I decided to reorganize the headers by adding a global header.

The gobal header crystalhd.h includes all the local headers.
The idea is that the crystalhd header will be the only included
by the others files, this will avoid the mess of many #include levels.

The order of the headers included by crystalhd.h considers the
dependencies among the headers.
Signed-off-by: NJorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed some coding style issues.
Signed-off-by: NAndrew Miller <amiller@amilx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes a superfluous loop in asus_oled.c
The code is equivalent to do{...} while (0) and thus executes the code
exactly once -> so we can simply remove the loop.
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace bitfield struct hbm_cmd with simple u8 as we
always access the value as whole. This allows us to remove
few ugly type casts
For possible further uses and documentation purposes we add
corresponding bitmask defines
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

~ENODEV is a different number than -ENODEV
Signed-off-by: NDevin J. Pohly <djpohly@gmail.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a bug where the zv code writes before the allocated
buffer, resulting in system memory corruption. This was introduced
during the switch from xvmalloc to zsmalloc.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a type mismatch in the compression code where
a size_t pointer was cast to a unsigned int pointer.  On
little endian archs, there is no issue.  However on big
endian archs, the value is incorrect, taking the high
order bits and truncating the lower order bits.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This structure is used in an ioctl definition and was causing the
64-bit PowerPC build to fail. The size of the array in the structure
has been reduced to fix this.
Signed-off-by: NChris Kelly <ckelly@ozmodevices.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The core must not modify available_scan_mask, because it causes problems
with drivers where multiple instances of the driver share the same mask set.
So make this explicit by marking available scan masks as const.

The max1363 driver needs some minor adjustment to accommodate this change.
Pull scan mask allocation into a separate function.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The declaration for iio_buffer_deinit has been around for quite some time, but
the function itself has never been added. So remove the declaration.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The AD5666 is identical to the ad5064-1, except that it has a internal reference
voltage.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>