Merge "Meson6 WDT support" from Carlo Caione:

This patch adds the support for the Meson6 watchdog in the DTSI

* tag 'meson-wdt-dt-3.18' of https://github.com/carlocaione/linux-meson:
  ARM: DTS: meson: update DTSI to add watchdog node
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NCarlo Caione <carlo@caione.org>

Pull "mvebu DT changes for v3.18 (round 2)" from Jason Cooper:

 - Armada XP
    - Add HW datasheet references to docs

 - Armada 370
    - Change internal registers to 0xf1000000 for Armada 370 RD board
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: switch the Armada 370 RD board to internal registers at 0xf1000000
  Documentation: arm: add hardware datasheet reference for Marvell Armada XP

Merge tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Pull "Few keystone DTS fixes for 3.18" from Santosh Shilimkar:

	- IO range fix for USB phy device
	- Add missing dma-coherent property for K2E USB node
	- Fix K2L MDIO start address
	- Fix K2E MDIO start address
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2l: fix mdio io start address
  ARM: dts: keystone-k2e: fix mdio io start address
  ARM: dts: keystone-k2e: update usb1 node for dma properties
  ARM: dts: keystone: fix io range for usb_phy0

The K2L MDIO io space has different start address.
Hence, fix it to be 0x26200f00 according to TRM.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

The K2E MDIO io space has different start address.
Hence, fix it to be 0x24200f00 according to TRM.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Such configuration applied for USB0 devices, but It's missed for
USB1 device which is present only in K2E SoC - hence apply it.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

The IO range size is set incorrectly for USB PHY0 deivice
it should be 24 instead of 32. Otherwise, It causes
USB PHY1 probing failure.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Apparently most of the newly added nodes had the same problem,
so instead of reverting the individual patches, this undoes
the effect of the merge and backs out all of them at once.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This reverts commit 610bd872.

"ARM: dts: hix5hd2: add wdg node" causes a build breakage due to
an undefined constatns:

Error: arch/arm/boot/dts/hisi-x5hd2.dtsi:374.22-23 syntax error

(Don't you just looove the dtc error messages? They are so informative!)
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Pull "Samsung DT update for 3.18" from Kukjin Kim:

- un-use slot-node and deprecate the supports-highspped
  for dw-mmc
- remove old USB2 PHY node for exynos5250

- exynos4412-odroid-common
  enable PMIC interrupt and i2c improvements

- exynos5250-snow
  fold exynos5250-cros-common
  update display related nodes

- Peach Pit and Pi
  improve power scheme, add support max77802 PMIC,
  add hdmi regulators add thermistor, ISL29018 sensor,
  set i2c clock at 400kHz, add support Atmel touchpad,
  update display related nodes
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: remove old USB2 PHY node for exynos5250
  ARM: dts: remove old USB2 PHY node hook for exynos5250-arndale
  ARM: dts: update display related nodes for exynos5800-peach-pi
  ARM: dts: update display related nodes for exynos5420-peach-pit
  ARM: dts: update display related nodes for exynos5250-snow
  ARM: dts: Add support Atmel touchpad for exynos5800-peach-pi
  ARM: dts: Add support Atmel touchpad for exynos5420-peach-pit
  ARM: dts: Set i2c7 clock at 400kHz for exynos based Peach boards
  ARM: dts: Add ISL29018 sensor for exynos based Peach boards
  ARM: dts: Add thermistor dts fragment used by exynos based Peach boards
  ARM: dts: add hdmi regulators for exynos5420-peach-pit
  ARM: dts: add hdmi regulators for exynos5800-peach-pi
  ARM: dts: Add support max77802 PMIC for exynos based Peach boards
  ARM: dts: Improve Peach Pit and Pi power scheme
  ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
  ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
  ARM: dts: Fix MMC pinctrl for exynos5250-snow
  ARM: dts: ODROID i2c improvements for exynos4412-odroid-common
  ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common

Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Pull "Keystone DTS updates for v3.18" from Santosh Shilimkar"

- Add IRQ and GPIO nodes
- Fix SPI chip select
- Fix usb and pcie clock nodes
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: fix bindings for pcie and usb clock nodes
  ARM: dts: keystone: k2l: Fix chip selects for SPI devices
  ARM: dts: keystone: add dsp gpio controllers nodes
  ARM: dts: keystone: add keystone irq controller node

Add dt for rk3288 i2s controller, since i2s clock pins and data pins
default to be GPIO, this patch also add pinctrl to mux them.

Tested on RK3288 board.
Signed-off-by: NJianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'dt-part2-v2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "part 2 of omap dts changes" from Tony Lindgren:

Changes to add dra7 PMU, display support for cm-t54, misc
changes needed for omap3 boards for device tree support.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'dt-part2-v2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: DRA7: Add PMU nodes
  ARM: dts: cm-t54: setup omap_dwc3
  ARM: dts: cm-t54: add ADS7846 touchscreen support
  ARM: dts: cm-t54: add Startek LCD support
  ARM: dts: cm-t54: add HDMI/DVI display data
  ARM: dts: cm-t54: fix mux mode comment style
  ARM: dts: sbc-t54: fix mux mode comment style
  ARM: dts: Enable PMIC idle configuration for LDP
  ARM: dts: Add support for Ethernet on some N900 macro boards
  ARM: dts: Do not set pulls for I2C lines
  ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs
  ARM: dts: omap3-overo: Fix UART wake-up events

... for V2M-P1 motherboard CLCD (limited to 640x480 16bpp and using
dedicated video RAM bank) and for V2P-CA9 (up to 1024x768 16bpp).
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Signed-off-by: NFlorian Meier <florian.meier@koalo.de>
[Tweaked slightly to disable by default -- broonie]
Signed-off-by: NMark Brown <broonie@linaro.org>
[swarren, removed duplicate i2s node]
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull "ARM: DT:  Hisilicon terminal SoC HiX5HD2 DT updates for 3.18" from Wei Xu:

- Add watchdog, gpio, sata, usb, mmc and gmac nodes in HiX5HD2 SoC DT
- Enable sata and gmac in HiX5HD2 dkb board DT
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hix5hd2: add wdg node
  ARM: dts: hix5hd2: add gpio node
  ARM: dts: hix5hd2: add sata node
  ARM: dts: hix5hd2: add usb node
  ARM: dts: hix5hd2: add mmc node
  ARM: dts: hix5hd2: add gmac node

Merge tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT Additions for 3.18" from Maxime Ripard:

Mostly:
  - A23 bringup ongoing
  - New boards: HSG H702, Merrii A20 Hummingbird
  - sun(4|5|7)i DMA support
  - DT relicensing to a dual GPL/X11 license
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (30 commits)
  ARM: dts: sun8i: Add DMA controller node
  ARM: dts: sun5i: Add DT for HSG H702 tablet board
  ARM: dts: sunxi: Add fixed 5V regulator
  ARM: sun8i: Relicense the A23 DTSI under GPLv2/X11
  ARM: sun7i: Relicense the A20 DTSI under GPLv2/X11
  ARM: sun6i: Relicense the A31 DTSI under GPLv2/X11
  ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
  ARM: dts: sun7i: Add Merrii A20 Hummingbird board
  ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux
  ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
  ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5
  ARM: dts: sun8i: Add i2c controller nodes
  ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
  ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
  ARM: dts: sun8i: Add mmc controller nodes
  ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
  ARM: dts: sun8i: Add mmc clocks to the dtsi
  ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
  ARM: dts: sun8i: Add pin muxing option for R_UART
  ARM: dts: sun8i: Add pinmux set for uart0
  ...

Merge tag 'renesas-dt5-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Fifth Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Document manufacturer for KZM boards
* Use SoC-specific irqc compatible property
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt5-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Add manufacturer for KZM boards
  ARM: shmobile: r8a73a4 dtsi: Add SoC-specific irqc compatible property

Merge tag 'pxa-fix-abi' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into next/dt

Pull "pxa2xx DT changes" from Haojian Zhuang:

Since DT aren't fully enabled in pxa2xx, it's fine to merge them in v3.18
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'pxa-fix-abi' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux:
  ARM: pxa: dts: fix ohci controller compatible string
  ARM: pxa: dts: fix mmc controller compatible string

Merge tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt

Pull "ARM: tegra: device tree changes for 3.18" from Stephen Warren:

The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
  to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
  help reduce use of iomap.h in a future code cleanup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: enable PCIe in Jetson TK1 DT
  ARM: tegra: add PCIe to Tegra124 DT
  ARM: tegra: rely on bootloader pinmux programming on Tegra124
  ARM: tegra: add Acer Chromebook 13 device tree
  ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi
  ARM: tegra: add touchpad to Venice2 DT
  ARM: tegra: Add device tree nodes for flow controller
  ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
  ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
  ARM: tegra: Add SATA controller to Tegra124 device tree

Pull "More AT91 DT material for 3.18" from Nicolas Ferre:

- specify DMA channels for USART on sama5d3 and choose peripherals
  that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
  to use enhancements that will land in drivers during this release
- several new nodes and fixes
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
  ARM: at91/dt: at91sam9m10g45ek add rtc node
  ARM: at91/dt: sama5d3: use new pinctrl compatible string
  ARM: at91/dt: sama5d3: add the nfc clock
  ARM: at91/dt: declare sckc node on at91sam9g45
  ARM: at91/dt: Fix typo regarding can0_clk
  ARM: at91/dt: at91sam9g20: switch ssc compatible string
  ARM: at91/dt: at91sam9rl: switch ssc compatible string
  ARM: at91: sama5d3xek: reserve dma channel for audio
  ARM: at91: sama5d3: add usart dma configurations

Pull "arm: Xilinx Zynq dt patches for v3.18" from Michal Simek:

- Add eth phys
- Add led for zc702
- Various dts cleanups
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: Add ISL9305 regulator on Parallella board
  ARM: zynq: DT: Add Ethernet phys
  ARM: zynq: DT: Fix coding style issues in dtsi
  ARM: zynq: DT: Describe interrupt-names for pl330
  ARM: zynq: DT: Extend compatible string for zedboard
  ARM: zynq: DT: Use 0x prefix for memory nodes
  ARM: zynq: DT: Update years in header
  ARM: zynq: DT: Move size/address properties to dtsi
  ARM: zynq: DT: Fix Ethernet phy modes
  ARM: zynq: DT: Add LEDs to zc702 DT

Add vendor prefixes and basic documentation for MesonX SoCs bindings
Signed-off-by: NCarlo Caione <carlo@caione.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex
A9 and an ARM Mali-400 GPU.
This patch adds two basic DTSI for the preliminary support of Meson and
Meson6 SoCs. Another DTS is also added for supporting the atv1200 board,
produced by Geniatech inc.
Signed-off-by: NCarlo Caione <carlo@caione.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo:

The i.MX device tree changes for 3.18:
 - Device tree support for i.MX ADS and Armadeus APF9328 boards
 - Enable thermal sensor support for i.MX6SL
 - Add LCD support for i.MX6SL EVK board
 - Fix display duplicate name for a bunch of board dts files
 - Configure imx6qdl-sabresd board pins locally to remove the dependency
   on bootloader
 - A set of imx28-tx28 board dts updates from Lothar
 - Add pci config space as platform resource
 - Enable devices RTC, I2C and HDMI for nitrogen6x board
 - Split HummingBoard DT to support s/dl and d/q
 - mSATA and IR input support for HummingBoard
 - Add SSI baud clock for i.MX6 device trees
 - Add USB support for vf610-colibri and vf610-twr boards
 - A set of cleanup and updates on Gateworks boards

* tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits)
  ARM: dts: imx6: make gpt per clock can be from OSC
  ARM: dts: imx: ventana: add canbus support for GW52xx
  ARM: dts: imx: ventana: cleanup pinctrl groups
  ARM: dts: imx: ventana: configure padconf for all pins
  ARM: dts: imx: ventana: use gpio constants
  ARM: dts: imx: ventana: remove unused aliases
  ARM: dts: imx: ventana: remove unsupported dt nodes
  ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
  ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
  ARM: dts: imx28-tx28: use GPIO flags
  ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
  ARM: dts: imx6sl: add baud clock and clock-names for ssi
  ARM: dts: imx6qdl: add baud clock and clock-names for ssi
  ARM: dts: imx6qdl-sabresd: Configure the pins locally
  ARM: dts: imx28-m28evk: Fix display duplicate name warning
  ARM: dts: imx28-tx28: Fix display duplicate name warning
  ARM: dts: imx28-m28cu: Fix display duplicate name warning
  ARM: dts: imx28-cfa100: Fix display duplicate name warning
  ARM: dts: imx28-apf28dev: Fix display duplicate name warning
  ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch changes the compatible string of the GIC to the
new "arm,cortex-a7-gic" which does reflect the actual hardware.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add the missing 'compatible' property to device tree root node of

 - mt6589-aquaris5.dts

and document the new values.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add boot argument for earlyprintk to the aquaris5 device tree file.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This changes the unit address of the gic node to it's first register area.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek
SoC.
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper:

mvebu DT changes for v3.18

 - Armada 375
    - Add RTC support

 - Armada 370
    - Add proper pinmuxing
    - Add SSCG
    - Add gpio-fan
    - Add LED support

 - change Intersil vendor prefix to isil
 - use improved Armada SPI compatible string

* tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add user LED support of Armada 370 RD
  ARM: mvebu: add gpio fan support to Armada 370 RD
  ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
  ARM: mvebu: use improved armada spi device tree compatible name
  ARM: mvebu: add SSCG to Armada 370 Device Tree
  ARM: mvebu: Add proper pin muxing on Armada 370 RD board
  ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
  ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
  ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
  ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
  ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC
  ARM: mvebu: Add RTC support for Armada 375
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "second bunch of dts changes for 3.18" from Heiko Stubner:

More peripheral support for Rockchip SoCs
- dwc2 usb controllers
- spi controllers
- emmc controller

* tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
  ARM: dts: rockchip: fix rk3188 emmc pull references
  ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
  ARM: dts: rockchip: clean up rk3xxx mmc nodes
  ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
  ARM: dts: rockchip: add Cortex-A9 SPI controller nodes
  ARM: dts: rockchip: enable usb ports on Radxa Rock
  ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188
  ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0
  ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
  ARM: dts: Add rk808 PMIC to rk3288-evb-rk808
  ARM: dts: Add mshc aliases for rk3288
  ARM: dts: Add SPI nodes to rk3288
  ARM: dts: Enable USB host1(dwc) on rk3288-evb
  ARM: dts: add rk3288 dwc2 controller support
  ARM: dts: Add sdio0 and sdio1 to the rk3288
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "qcom DT changes for v3.18-2" from Kumar Gala:

Qualcomm ARM Based Device Tree Updates for v3.18-2

* Added SDCC nodes on MSM8960/CDP and MSM8660/SURF
* Added I2C and SDCC4/WLAN on APQ8064/IFC6410
* Added I2C on MSM8984/DB8074

* tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: DT: msm8960: Add sdcc nodes
  ARM: DT: msm8660: Add sdcc nodes
  ARM: DT: apq8064: Add i2c device nodes
  ARM: DT: apq8064: add support to sdcc4 for wlan.
  ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "qcom DT changes for v3.18" from Kumar Gala:

Qualcomm ARM Based Device Tree Updates for v3.18

* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
  keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
  keypad, and rtc

* tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: DT: QCOM: apq8064: Add dma support for sdcc node
  ARM: DT: apq8064: Add sdcc support via mcci driver.
  ARM: dts: qcom: Add 8064 multimedia clock controller node
  ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
  ARM: DT: APQ8064: Add pinctrl support
  ARM: dts: qcom: Add TLMM DT node for APQ8084
  ARM: dts: qcom: Add initial IFC6540 board device tree
  ARM: dts: msm: Add 8058 PMIC to ssbi bus
  ARM: dts: msm: Add 8921 PMIC to ssbi bus
  ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
  ARM: dts: qcom: Add APQ8084 serial port DT node
  ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:

Changes for .dts files for omaps for v3.18 merge window:

- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps

* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits)
  ARM: dts: OMAP2+: Add sub mailboxes device node information
  ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
  ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
  ARM: dts: AM437x: switch to compatible pinctrl
  ARM: dts: DRA7: switch to compatible pinctrl
  ARM: dts: OMAP5: switch to compatible pinctrl
  ARM: dts: am335x-boneblack: Add names for remaining regulators
  ARM: dts: sbc-t54: fix model property
  ARM: dts: omap5.dtsi: add DSS RFBI node
  ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
  ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
  ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
  ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
  ARM: OMAP2+: board-generic: add support for AM57xx family
  ARM: dts: dra72-evm: Add tps65917 PMIC node
  ARM: dts: dra72-evm: Enable I2C1 node
  Linux 3.17-rc3
  unicore32: Fix build error
  vexpress/spc: fix a build warning on array bounds
  spi: sh-msiof: Fix transmit-only DMA transfers
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Fix incorrect clock names for usb1, pcie1 and domain register
offset for pcie1 clock nodes on K2E EVM
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

There are 5 chip selects per SPI0 and SPI2 and 3 per SPI1. SPI2 needs
to be pinned out to use and by default they are disabled. So keep the
state disabled to reflect default.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Add Keystone 2 DSP GPIO nodes for SoCs:
k2hk:
 DSP GPIO banks 0-7 correspond to DSP0-DSP7
k2l:
 DSP GPIO banks 0-3 correspond to DSP0-DSP3
k2e:
 DSP GPIO bank 0 corresponds to DSP0
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

Add Keystone IRQ controller IP node which allows ARM
CorePac core to receive signals from DSP cores.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>