- 23 7月, 2015 26 次提交
-
-
由 Mitch Williams 提交于
Store off the PF's API version, then use it to determine whether or not to send it our capabilities. Change the version checking to allow for PF drivers with lower API versions than our current version, so we can still talk to PF drivers over the 1.0 API. Change-ID: I8edc55d1229c7decf0ed3f285a63032694007c2e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The most common type of reset that the VF will encounter is a PF reset that cascades down into a VF reset for each VF. In this case, the VF will always be assigned the same VSI and recovery is fairly simple. However, in the case of 'bigger' resets, such as a Core or EMP reset, when the device is reinitialized, it's probable that the VF will NOT get the same VSI. When this happens, the VF will not be able to recover, as it will continue to request resources for its original VSI. Add an extra state to the admin queue state machine so that the driver can re-request its configuration information at runtime. During reset recovery, set this bit in the aq_required field, and fetch the (possibly new) configuration information before attempting to bring the driver back up. Since the driver doesn't know what kind of reset it has encountered, this step is done even for a PF reset, but it doesn't hurt anything - it just gets the same VSI back. Change-ID: I915d59ffb40375215117362f4ac7a37811aba748 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Store off the VF API version for use when figuring out the VF driver capabilities. Add support for the VF driver handing its capabilities to the PF driver and then use this information when sending VF resource information back to the VF driver. Change-ID: Ic00d0eeeb5b8118085e12f068ef857089a8f7c2d Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Now that we've rolled the virtual channel API version to 1.1, add some macros to test what version is being used by our partner in crime. For the VF, add some macros to determine what our device capabilities are. Change-ID: I79f6683d4c23bd76a8ad9fd492776fcc1208e1dc Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
To prepare for the changes coming up in the X722 device and future devices, the virtual channel interface has to change slightly. The VF driver can now report what its capable of supporting, which then informs the PF driver when it sends the configuration information back to the VF. A 1.1 VF driver on a 1.0 PF driver should not send its capabilities. Likewise, a 1.1 PF driver controlling a 1.0 VF driver should not expect or depend upon receiving the VF capabilities. All other aspects of the API are unchanged. Change-ID: I530cc55f107edd1ee8bdf95830aa90b87854058a Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NAnjali Singhai <anjali.singhai@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
With a little work we can clean up some unnecessary logic jumping and drop a variable. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Cc: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch changes the switch statement for dynamic interrupt throttling and adds a default case. With this patch, we check the latency setting instead of the current ITR settings and the included refactor improves performance. Without this patch, the ITR setting would never change dynamically, and there was no default. Change-ID: Idb5a8a14c7109ec47c90f6e94bd43baa17d7ee37 Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
Use the ARRAY_SIZE macro rather than calculating sizeof(a)/sizeof(a[0]). Also directly replace the code rather than using an unnecessary define. Reported-by: NManinder Singh <maninder1.s@samsung.com> Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
There are many settings possible using ethtool -C/--coalesce, but not all of them are supported in igb. Report failure when an unsupported option is set. Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jia-Ju Bai 提交于
The driver lacks pm_qos_remove_request in error handling (err_req_irq) of e1000_open, and qos request inserted by pm_qos_add_request is not removed. This patch add pm_qos_remove_request in error handling to fix it. Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This patch extends the reporting of the RSS key and hash table by adding support for X550 VFs. The difference is that X550 VFs have their own registers for RSS key and indirection table, so there is no need to query the PF. The RSS key and indirection table are stored in the adapter structure during the configuration of VFRSSRK and VFRETA which in turn can be used in ethtool for reporting. The logic for writing VFRETA is also changed to make sure that the indirection table is reported correctly. In addition this patch adds defines for the VFRETA entries and number of VFRSSRK registers as well as some whitespace cleanups. Reported-by: NVlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Thomas Graf 提交于
Convert the module_init() to a invocation from inet_init() since ip_tunnel_core is part of the INET built-in. Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Don't use shared bluetooth antenna in iwlwifi driver for management frames, from Emmanuel Grumbach. 2) Fix device ID check in ath9k driver, from Felix Fietkau. 3) Off by one in xen-netback BUG checks, from Dan Carpenter. 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann. 5) Fix races in setting peeked bit flag in SKBs during datagram receive. If it's shared we have to clone it otherwise the value can easily be corrupted. Fix from Herbert Xu. 6) Revert fec clock handling change, causes regressions. From Fabio Estevam. 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG Cong. 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.) from WANG Cong and Konstantin Khlebnikov. 9) Memory leak in act_bpf packet action, from Alexei Starovoitov. 10) ARM bpf JIT bug fixes from Nicolas Schichan. 11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from Michael S Tsirkin. 12) Destruction of bond with different ARP header types not handled correctly, fix from Nikolay Aleksandrov. 13) Revert GRO receive support in ipv6 SIT tunnel driver, causes regressions because the GRO packets created cannot be processed properly on the GSO side if we forward the frame. From Herbert Xu. 14) TCCR update race and other fixes to ravb driver from Sergei Shtylyov. 15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet. 16) Fix panics on packet scheduler filter replace, from Daniel Borkmann. 17) Make sure AF_PACKET sees properly IP headers in defragmented frames (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee. 18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) ravb: fix ring memory allocation net: phy: dp83867: Fix warning check for setting the internal delay openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes netlink: don't hold mutex in rcu callback when releasing mmapd ring ARM: net: fix vlan access instructions in ARM JIT. ARM: net: handle negative offsets in BPF JIT. ARM: net: fix condition for load_order > 0 when translating load instructions. tcp: suppress a division by zero warning drivers: net: cpsw: remove tx event processing in rx napi poll inet: frags: fix defragmented packet's IP header for af_packet net: mvneta: fix refilling for Rx DMA buffers stmmac: fix setting of driver data in stmmac_dvr_probe sched: cls_flow: fix panic on filter replace sched: cls_flower: fix panic on filter replace sched: cls_bpf: fix panic on filter replace net/mdio: fix mdio_bus_match for c45 PHY net: ratelimit warnings about dst entry refcount underflow or overflow caif: fix leaks and race in caif_queue_rcv_skb() qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355 ravb: fix race updating TCCR ...
-
由 Thomas Graf 提交于
Account for the configuration FIB_RULES=y && INET=n as FIB_RULES can be selected by IPV6 or DECNET without INET. Fixes: e7030878 ("fib: Add fib rule match on tunnel id") Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Kline 提交于
Per RFC 6724, section 4, "Candidate Source Addresses": It is RECOMMENDED that the candidate source addresses be the set of unicast addresses assigned to the interface that will be used to send to the destination (the "outgoing" interface). Add a sysctl to enable this behaviour. Signed-off-by: NErik Kline <ek@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Support the new USB gigabit ethernet. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
fix for: net/mpls/mpls_iptunnel.c:73:19: sparse: incompatible types in comparison expression (different address spaces) remove incorrect rcu_dereference possibly left over from earlier revisions of the code. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== bnx2x: update FW, rebrand and more This patch series does several things - it updates the bnx2x FW into 7.12.30 which both contains some small fixes as well as opening the door for several new features for the device - mainly vxlan/geneve offloads and vlan filtering offload. It then adds a new Multi-function mode [BD] which requires this FW in order to operate. In addition, this finally rebrands the driver from a 'broadcom' driver into a 'qlogic' driver [although it would still reside under Broadcom's tree in the kernel]. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Devices with up-to-date management FW will be able to store register dumps on their persistent storage - in case management FW identifies a fatal error it would gather and store such dumps, which could later be retrieved using specific debug tools. This patch adds the necessary part in the driver in order to make the feature operational, as well as update users [under debug] during load in case their device contains a dump of a previous crash. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds support to a new multi-function mode, enabling driver to initialize such devices and correctly interacting with management FW for fully utilizing their features. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
This adds support to a new copper phy. Signed-off-by: NYaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
bnx2x still appears as a Broadcom driver even though the devices it utilizes belong to Qlogic for more than a year. This patch changes the various headers and the device strings to indicate the correct ownership of the device. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following: - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - FCoE traffic might not recover after a failue while there's traffic to another function. In addition, this FW opens the door for the driver to implement several new features; Specifically, this enhances the device's support for encapsulated packets and will allow vxlan/geneve offloads to be added in the future, as well as vlan filtering offload. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2015 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull ARM64 fixes from Catalin Marinas: - arm64 build fix following the move of the thread_struct to the end of task_struct and the asm offsets becoming too large for the AArch64 ISA - preparatory patch for moving irq_data struct members (applied now to reduce dependency for the next merging window) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64/irq: Use access helper irq_data_get_affinity_mask() arm64: switch_to: calculate cpu context pointer using separate register
-
由 Jiang Liu 提交于
This is a preparatory patch for moving irq_data struct members. Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
Commit 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") moved the thread_struct to the bottom of task_struct. As a result, the offset is now too large to be used in an immediate add on arm64 with some kernel configs: arch/arm64/kernel/entry.S: Assembler messages: arch/arm64/kernel/entry.S:588: Error: immediate out of range arch/arm64/kernel/entry.S:597: Error: immediate out of range This patch calculates the offset using an additional register instead of an immediate offset. Fixes: 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Rick Jones 提交于
Track success and failure of TCP PMTU probing. Signed-off-by: NRick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver is written as if it can adapt to a low memory situation allocating less RX skbs and TX aligned buffers than the respective RX/TX ring sizes. In reality though the driver would malfunction in this case. Stop being overly smart and just fail in such situation -- this is achieved by moving the memory allocation from ravb_ring_format() to ravb_ring_init(). We leave dma_map_single() calls in place but make their failure non-fatal by marking the corresponding RX descriptors with zero data size which should prevent DMA to an invalid addresses. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Add debugfs entry 'use_backdoor' to enable backdoor access to read sge context. By default, we read sge context's via firmware. In case of FW issues, one can enable backdoor access via debugfs to dump sge context for debugging purpose. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Murphy 提交于
Fix warning: logical ‘or’ of collectively exhaustive tests is always true Change the internal delay check from an 'or' condition to an 'and' condition. Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NDan Murphy <dmurphy@ti.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
If user did not specify an oif, try and get it from the via address. If failed to get device, return with -ENODEV. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris J Arges 提交于
Some architectures like POWER can have a NUMA node_possible_map that contains sparse entries. This causes memory corruption with openvswitch since it allocates flow_cache with a multiple of num_possible_nodes() and assumes the node variable returned by for_each_node will index into flow->stats[node]. Use nr_node_ids to allocate a maximal sparse array instead of num_possible_nodes(). The crash was noticed after 3af229f2 was applied as it changed the node_possible_map to match node_online_map on boot. Fixes: 3af229f2Signed-off-by: NChris J Arges <chris.j.arges@canonical.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Kirill A. Shutemov says: This simple test-case trigers few locking asserts in kernel: int main(int argc, char **argv) { unsigned int block_size = 16 * 4096; struct nl_mmap_req req = { .nm_block_size = block_size, .nm_block_nr = 64, .nm_frame_size = 16384, .nm_frame_nr = 64 * block_size / 16384, }; unsigned int ring_size; int fd; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0) exit(1); if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0) exit(1); ring_size = req.nm_block_nr * req.nm_block_size; mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); return 0; } +++ exited with 0 +++ BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220 #1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70 #2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0 Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20 CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98 Call Trace: <IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270 [<ffffffff81085bed>] __might_sleep+0x4d/0x90 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150 [<ffffffff817e484d>] __sk_free+0x1d/0x160 [<ffffffff817e49a9>] sk_free+0x19/0x20 [..] Cong Wang says: We can't hold mutex lock in a rcu callback, [..] Thomas Graf says: The socket should be dead at this point. It might be simpler to add a netlink_release_ring() function which doesn't require locking at all. Reported-by: N"Kirill A. Shutemov" <kirill@shutemov.name> Diagnosed-by: NCong Wang <cwang@twopensource.com> Suggested-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Edward Cree says: ==================== sfc: support for cascaded multicast filtering Recent versions of firmware for SFC9100 adapters add support for filter chaining, in which packets matching multiple filters are delivered to all filters' recipients, rather than only the highest match-priority filter as was previously the case. This patch series enables this feature and redesigns the filter handling code to make use of it; in particular, subscribing to a multicast address on one function no longer prevents traffic to that address reaching another function which is in promiscuous or allmulti mode. If the firmware does not support filter chaining, the driver will fall back to the old behaviour. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Separate functions for inserting individual and promisc filters; explicit fallback logic in efx_ef10_filter_sync_rx_mode(), in order not to overload the 'promisc' flag as also meaning "fall back to promisc". Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
If the workaround to support cascaded multicast filters ("workaround_26807") is enabled, the broadcast filter and individual multicast filters are not inserted when in promiscuous or allmulti mode. There is a race while inserting and removing filters when entering and leaving promiscuous mode. When changing promiscuous state with cascaded multicast filters, the old multicast filters are removed before inserting the new filters to avoid duplicating packets; this can lead to dropped packets until all filters have been inserted. The efx_nic:mc_promisc flag is added to record the presence of a multicast promiscuous filter; this gives a simple way to tell if the promiscuous state is changing. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Pieczko 提交于
This change is only re-factoring; there are no changes to functionality except for a slight elaboration of an error message (on mismatch filter insertion failure). Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-