Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

We store the rule blob per (possible) cpu.  Unfortunately this means we can
waste lot of memory on big smp machines. ipt_entry structure ('rule head')
is 112 byte, so e.g. with maxcpu=64 one single rule eats
close to 8k RAM.

Since previous patch made counters percpu it appears there is nothing
left in the rule blob that needs to be percpu.

On my test system (144 possible cpus, 400k dummy rules) this
change saves close to 9 Gigabyte of RAM.
Reported-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The binary arp/ip/ip6tables ruleset is stored per cpu.

The only reason left as to why we need percpu duplication are the rule
counters embedded into ipt_entry et al -- since each cpu has its own copy
of the rules, all counters can be lockless.

The downside is that the more cpus are supported, the more memory is
required.  Rules are not just duplicated per online cpu but for each
possible cpu, i.e. if maxcpu is 144, then rule is duplicated 144 times,
not for the e.g. 64 cores present.

To save some memory and also improve utilization of shared caches it
would be preferable to only store the rule blob once.

So we first need to separate counters and the rule blob.

Instead of using entry->counters, allocate this percpu and store the
percpu address in entry->counters.pcnt on CONFIG_SMP.

This change makes no sense as-is; it is merely an intermediate step to
remove the percpu duplication of the rule set in a followup patch.
Suggested-by: NEric Dumazet <edumazet@google.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reported-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

If bridge netfilter is used with both
bridge-nf-call-iptables and bridge-nf-filter-vlan-tagged enabled
then ip fragments in VLAN frames are sent without the vlan header.

This has never worked reliably.  Turns out this relied on pre-3.5
behaviour where skb frag_list was used to store ip fragments;
ip_fragment() then re-used these skbs.

But since commit 3cc49492
("ipv4: use skb coalescing in defragmentation") this is no longer
the case.  ip_do_fragment now needs to allocate new skbs, but these
don't contain the vlan tag information anymore.

Fix it by storing vlan information of the ressembled skb in the
br netfilter percpu frag area, and restore them for each of the
fragments.

Fixes: 3cc49492 ("ipv4: use skb coalescing in defragmentation")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

since commit d6b915e2
("ip_fragment: don't forward defragmented DF packet") the largest
fragment size is available in the IPCB.

Therefore we no longer need to care about 'encapsulation'
overhead of stripped PPPOE/VLAN headers since ip_do_fragment
doesn't use device mtu in such cases.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

IPv6 fragmented packets are not forwarded on an ethernet bridge
with netfilter ip6_tables loaded. e.g. steps to reproduce

1) create a simple bridge like this

        modprobe br_netfilter
        brctl addbr br0
        brctl addif br0 eth0
        brctl addif br0 eth2
        ifconfig eth0 up
        ifconfig eth2 up
        ifconfig br0 up

2) place a host with an IPv6 address on each side of the bridge

        set IPv6 address on host A:
        ip -6 addr add fd01:2345:6789:1::1/64 dev eth0

        set IPv6 address on host B:
        ip -6 addr add fd01:2345:6789:1::2/64 dev eth0

3) run a simple ping command on host A with packets > MTU

        ping6 -s 4000 fd01:2345:6789:1::2

4) wait some time and run e.g. "ip6tables -t nat -nvL" on the bridge

IPv6 fragmented packets traverse the bridge cleanly until somebody runs.
"ip6tables -t nat -nvL". As soon as it is run (and netfilter modules are
loaded) IPv6 fragmented packets do not traverse the bridge any more (you
see no more responses in ping's output).

After applying this patch IPv6 fragmented packets traverse the bridge
cleanly in above scenario.
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
[pablo@netfilter.org: small changes to br_nf_dev_queue_xmit]
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Prepare check_hbh_len() to be called from newly introduced
br_validate_ipv6() in next commit.
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

br_parse_ip_options() does not parse any IP options, it validates IP
packets as a whole and the function name is misleading.

Rename br_parse_ip_options() to br_validate_ipv4() and remove unneeded
commments.
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Currently frag_max_size is member of br_input_skb_cb and copied back and
forth using IPCB(skb) and BR_INPUT_SKB_CB(skb) each time it is changed or
used.

Attach frag_max_size to nf_bridge_info and set value in pre_routing and
forward functions. Use its value in forward and xmit functions.
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

IPv4 iptables allows to REDIRECT/DNAT/SNAT any traffic over a bridge.

e.g. REDIRECT
$ sysctl -w net.bridge.bridge-nf-call-iptables=1
$ iptables -t nat -A PREROUTING -p tcp -m tcp --dport 8080 \
  -j REDIRECT --to-ports 81

This does not work with ip6tables on a bridge in NAT66 scenario
because the REDIRECT/DNAT/SNAT is not correctly detected.

The bridge pre-routing (finish) netfilter hook has to check for a possible
redirect and then fix the destination mac address. This allows to use the
ip6tables rules for local REDIRECT/DNAT/SNAT REDIRECT similar to the IPv4
iptables version.

e.g. REDIRECT
$ sysctl -w net.bridge.bridge-nf-call-ip6tables=1
$ ip6tables -t nat -A PREROUTING -p tcp -m tcp --dport 8080 \
  -j REDIRECT --to-ports 81

This patch makes it possible to use IPv6 NAT66 on a bridge. It was tested
on a bridge with two interfaces using SNAT/DNAT NAT66 rules.
Reported-by: NArtie Hamilton <artiemhamilton@yahoo.com>
Signed-off-by: NSven Eckelmann <sven@open-mesh.com>
[bernhard.thaler@wvnet.at: rebased, add indirect call to ip6_route_input()]
[bernhard.thaler@wvnet.at: rebased, split into separate patches]
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Put br_nf_pre_routing_finish_ipv6() after daddr_was_changed() and
br_nf_pre_routing_finish_bridge() to prepare calling these functions
from there.
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

use binary AND on complement of BRNF_NF_BRIDGE_PREROUTING to unset
bit in nf_bridge->mask.
Signed-off-by: NBernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

After db29a950 ("netfilter: conntrack: disable generic tracking for
known protocols"), if the specific helper is built but not loaded
(a standard for most distributions) systems with a restrictive firewall
but weak configuration regarding netfilter modules to load, will
silently stop working.

This patch then puts a warning message so the sysadmin knows where to
start looking into. It's a pr_warn_once regardless of protocol itself
but it should be enough to give a hint on where to look.

Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Eric Dumazet says:

====================
tcp: defer shinfo->gso_size|type settings

We put shinfo->gso_segs in TCP_SKB_CB(skb) a while back for performance
reasons.

This was in commit cd7d8498 ("tcp: change tcp_skb_pcount() location")

This patch series complete the job for gso_size and gso_type, so that
we do not bring 2 extra cache lines in tcp write xmit fast path,
and making tcp_init_tso_segs() simpler and faster.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We had various issues in the past when TCP stack was modifying
gso_size/gso_segs while clones were in flight.

Commit c52e2421 ("tcp: must unclone packets before mangling them")
fixed these bugs and added a WARN_ON_ONCE(skb_cloned(skb)); in
tcp_set_skb_tso_segs()

These bugs are now fixed, and because TCP stack now only sets
shinfo->gso_size|segs on the clone itself, the check can be removed.

As a result of this change, compiler inlines tcp_set_skb_tso_segs() in
tcp_init_tso_segs()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit cd7d8498 ("tcp: change tcp_skb_pcount() location") we stored
gso_segs in a temporary cache hot location.

This patch does the same for gso_size.

This allows to save 2 cache line misses in tcp xmit path for
the last packet that is considered but not sent because of
various conditions (cwnd, tso defer, receiver window, TSQ...)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_set_skb_tso_segs() & tcp_init_tso_segs() no longer
use the sock pointer.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Our goal is to touch skb_shinfo(skb) only when absolutely needed,
to avoid two cache line misses in TCP output path for last skb
that is considered but not sent because of various conditions
(cwnd, tso defer, receiver window, TSQ...)

A packet is GSO only when skb_shinfo(skb)->gso_size is not zero.

We can set skb_shinfo(skb)->gso_type to sk->sk_gso_type even for
non GSO packets.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_gso_segment() and tcp_gro_receive() are not strictly
part of TCP stack. They should not assume tcp_skb_mss(skb)
is in fact skb_shinfo(skb)->gso_size.

This will allow us to change tcp_skb_mss() in following patches.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a BUG_ON() where CONFIG_NET_SWITCHDEV is set but the driver for a
bridged port does not support switchdev_port_attr_set op.  Don't BUG_ON()
if -EOPNOTSUPP is returned.

Also change BUG_ON() to netdev_err since this is a normal error path and
does not warrant the use of BUG_ON(), which is reserved for unrecoverable
errs.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Reported-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ivan Vecera says:

====================
bna: clean-up

The patches clean the bna driver.

v2: changes & comments requested by Joe
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

...and remove some of them. It is not necessary to log when .probe() and
.remove() are called or when TxQ is started or stopped. Also log level
of some of them was changed to more appropriate one (link up/down,
firmware loading failure.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Timeout functions are defined with 'void *' ptr argument. They should
be defined directly with 'struct bfa_ioc *' type to avoid type conversions.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove macros for manipulation with struct list_head and replace them
with standard ones.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pointer cmpl used to iterate through completion entries is updated at
the beginning of while loop as well as at the end. The update at the end
of the loop is useless.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch converts kzalloc->copy_from_user sequence to memdup_user. There
is also one useless assignment of NULL to bnad->regdata as it is followed
by assignment of kzalloc output.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TX_E_PRIO_CHANGE event is never sent for bna_tx so it doesn't need to be
handled. After this change bna_tx->flags cannot contain
BNA_TX_F_PRIO_CHANGED flag and it can be also eliminated.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bna_rx_config struct member paused can be removed as it is never
written and as it cannot have non-zero value the bna_rxf struct member
flags also cannot have BNA_RXF_F_PAUSED value and is always zero.
So the flags member can be removed as well as bna_rxf_flags enum and
the code-paths that needs to have non-zero bna_rxf->flags.
This clean-up makes bna_rxf_sm_paused state unsed and can be also removed.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RXF_E_PAUSE & RXF_E_RESUME events are never sent for bna_rxf object so
they needn't to be handled. The bna_rxf's state bna_rxf_sm_fltr_clr_wait
and function bna_rxf_fltr_clear are unused after this so remove them also.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

removed:
bna_rx_ucast_add
bna_rx_ucast_del

simplified:
bna_enet_pause_config
bna_rx_mcast_delall
bna_rx_mcast_listset
bna_rx_mode_set
bna_rx_ucast_listset
bna_rx_ucast_set
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

replaced macros:
BNA_MAC_IS_EQUAL -> ether_addr_equal
BNA_POWER_OF_2 -> is_power_of_2
BNA_TO_POWER_OF_2_HIGH -> roundup_pow_of_two

removed unused macros:
bfa_fsm_get_state
bfa_ioc_clr_stats
bfa_ioc_fetch_stats
bfa_ioc_get_alt_ioc_fwstate
bfa_ioc_isr_mode_set
bfa_ioc_maxfrsize
bfa_ioc_mbox_cmd_pending
bfa_ioc_ownership_reset
bfa_ioc_rx_bbcredit
bfa_ioc_state_disabled
bfa_sm_cmp_state
bfa_sm_get_state
bfa_sm_send_event
bfa_sm_set_state
bfa_sm_state_decl
BFA_STRING_32
BFI_ADAPTER_IS_{PROTO,TTV,UNSUPP)
BFI_IOC_ENDIAN_SIG
BNA_{C,RX,TX}Q_PAGE_INDEX_MAX
BNA_{C,RX,TX}Q_PAGE_INDEX_MAX_SHIFT
BNA_{C,RX,TX}Q_QPGE_PTR_GET
BNA_IOC_TIMER_FREQ
BNA_MESSAGE_SIZE
BNA_QE_INDX_2_PTR
BNA_QE_INDX_RANGE
BNA_Q_GET_{C,P}I
BNA_Q_{C,P}I_ADD
BNA_Q_FREE_COUNT
BNA_Q_IN_USE_COUNT
BNA_TO_POWER_OF_2
containing_rec
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch converts mac_t type to widely used 'u8 [ETH_ALEN]'.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>