- 06 6月, 2015 5 次提交
-
-
由 Nicholas Mc Guire 提交于
Fix possible unintended sign extension in unsigned MMIO loads by casting to uint16_t in the case of mmio_needed != 2. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Tested-by: NJames Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9985/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
Fix stack pointer offset which could potentially corrupt argument registers in the previous frame. The calculated offset reflects the size of all the registers we need to preserve so there is no need for this erroneous subtraction. [ralf@linux-mips.org: Fixed conflict due to only applying this fix part of the entire series as part of 4.1 fixes.] Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/10527/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Huacai Chen 提交于
setup_per_cpu_areas() only setup __per_cpu_offset[] for each possible cpu, but loongson_sysconf.nr_cpus can be greater than possible cpus (due to reserved_cpus_mask). So in loongson3_ipi_interrupt(), percpu access will touch the original varible in .data..percpu section which has been freed. Without this patch, cpu-hotplug will cause memery corruption. Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/10524/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Adam Jiang <jiang.adam@gmail.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 2.6.37+ Patchwork: http://patchwork.linux-mips.org/patch/10531/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joshua Kinard 提交于
Fixes a typo in arch/mips/mm/c-r4k.c's probe_scache(). Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 6月, 2015 1 次提交
-
-
由 Maciej W. Rozycki 提交于
Use the default FCSR value in mask probing, avoiding an FPE exception where reset has left any exception enable and their corresponding cause bits set and the register is then rewritten with these bits active. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 02 6月, 2015 1 次提交
-
-
由 Alban Bedel 提交于
The memory setup log is missing a new line. Signed-off-by: NAlban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9771/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 6月, 2015 1 次提交
-
-
由 Jonas Gorski 提交于
Due to a typo the illegal access interrupt is never cleared in by the interupt handler, causing an effective deadlock on the first illegal access. This was broken since the code was introduced in 5433acd8 ("MIPS: ralink: add illegal access driver"), but only exposed when the Kconfig symbol was added, thus enabling the code. Cc: <stable@vger.kernel.org> [3.18+] Fixes: a7b7aad3 ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC") Signed-off-by: NJonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/10172/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 30 5月, 2015 3 次提交
-
-
由 Maciej W. Rozycki 提交于
Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user() return value in case of overlong strings.] causing assembler warnings and broken code generated in __strnlen_kernel_nocheck_asm: arch/mips/lib/strnlen_user.S: Assembler messages: arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot with the CPU_DADDI_WORKAROUNDS option set, resulting in the function looping indefinitely upon mounting NFS root. Use conditional assembly to avoid a microMIPS code size regression. Using $at unconditionally would cause such a regression as there are no 16-bit instruction encodings available for ALU operations using this register. Using $v1 unconditionally would produce short microMIPS encodings, but would prevent this register from being used across calls to this function. The extra LI operation introduced is free, replacing a NOP originally scheduled into the delay slot of the branch that follows. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10205/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Petri Gynther 提交于
bmips_wr_vec() copies exception vector code from start to dst. The call to dma_cache_wback() needs to flush (end-start) bytes, starting at dst, from write-back cache to memory. Signed-off-by: NPetri Gynther <pgynther@google.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NKevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10193/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Laurent Fasnacht 提交于
initrd_start is defined in init/do_mounts_initrd.c, which is only included in kernel if CONFIG_BLK_DEV_INITRD=y. Signed-off-by: NLaurent Fasnacht <l@libres.ch> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10198/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 26 5月, 2015 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Since commit 100832ab ("usb: isp1760: Make HCD support optional"), CONFIG_USB_ISP1760_HCD is automatically selected when needed. Enabling that option in the defconfig is now a no-op, and no longer enables ISP1760 HCD support. Re-enable the ISP1760 driver in the defconfig by enabling USB_ISP1760_HOST_ROLE instead. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10180/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joe Perches 提交于
Use the generic mechanism to declare a bitmap instead of unsigned long. This could fix an overwrite defect of whatever follows irq_map. Not all "#define NR_IRQS <value>" are a multiple of BITS_PER_LONG so using DECLARE_BITMAP allocates the proper number of longs required for the possible bits. For instance: arch/mips/include/asm/mach-ath79/irq.h:#define NR_IRQS 51 arch/mips/include/asm/mach-db1x00/irq.h:#define NR_IRQS 152 arch/mips/include/asm/mach-lantiq/falcon/irq.h:#define NR_IRQS 328 Signed-off-by: NJoe Perches <joe@perches.com> Cc: linux-mips <linux-mips@linux-mips.org> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: John Crispin <blogic@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/10091/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 16 5月, 2015 2 次提交
-
-
由 James Hogan 提交于
The ELPA bit in PageGrain is all about large *physical* addresses, so correct the reference to "large virtual address" in the comment above where it is set for MIPS64. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10038/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ezequiel Garcia 提交于
cpu_set was removed (along with a bunch of cpumask helpers) by commit 2f0f267e ("cpumask: remove deprecated functions."). Fix this by replacing cpu_set with cpumask_set_cpu. Without this fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y. arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup': arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration] Fixes: 90db024f ("MIPS: smp-cps: cpu_set FPU mask if FPU present") Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Acked-by: NNiklas Cassel <niklass@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9912/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 13 5月, 2015 6 次提交
-
-
由 Joshua Kinard 提交于
Fix two build errors in reset code introduced in DS1685 platform hook patch. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Fixes: 15beb694: "mips: ip32: add platform data hooks to use DS1685 driver" Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: LKML <linux-kernel@vger.kernel.org> Cc: rtc-linux@googlegroups.com Cc: Linux MIPS List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/9787/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Nicholas Mc Guire 提交于
As kvm_mips_complete_mmio_load() did not yet modify PC at this point as James Hogans <james.hogan@imgtec.com> explained the curr_pc variable and the comments along with it can be dropped. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.org/lkml/2015/5/8/422 Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9993/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Petri Gynther 提交于
__show_regs() calls show_regs_print_info(), which already outputs the Tainted: information. So, no need to output it twice. Signed-off-by: NPetri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9997/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aaro Koskinen 提交于
GCC 5.1 defines __REGISTER_PREFIX__ to $. This will break sparse command line (and build fails with: /bin/sh: syntax error: unexpected "(") since make tries to expand starting with the dollar sign with a make variable. Prevent that by using double dollar sign. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10025/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Fix "BUG: using smp_processor_id() in preemptible" reported in accesses to thread's FPU defaults: the value to initialise FSCR to at program startup, the FCSR r/w mask and the contents of FIR in full FPU emulation, removing a regression introduced with 9b26616c [MIPS: Respect the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR feature flags for full emulation]. Use `boot_cpu_data' to obtain the data from, following the approach that `cpu_has_*' macros take and avoiding the call to `smp_processor_id' made in the reference to `current_cpu_data'. The contents of FSCR have to be consistent across processors in an SMP system, the settings there must not change as a thread is migrated across processors. And the contents of FIR are guaranteed to be consistent in FPU emulation, by definition. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Tested-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: NPaul Martin <paul.martin@codethink.co.uk> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10030/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Commit 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") reworked the ELF FP ABI mode selection logic, but when CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries which have no PT_MIPS_ABIFLAGS program header & associated .MIPS.abiflags section. A default mode is selected based upon whether the ELF contains MIPS32 or MIPS64 code, but that selection is made in arch_elf_pt_proc. arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is found. If one is not found then arch_elf_pt_proc is never called, and no default overall_fp_mode value is selected. When arch_check_elf is called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both prog_req & interp_req being set to none_req. none_req matches none of the conditions for mode selection at the end of arch_check_elf, so overall_fp_mode is left untouched. Finally once mips_set_personality_fp is called the BUG() in the default case is then hit & the kernel likely panics. Fix this by moving the selection of a default overall mode to the start of arch_check_elf, which runs once per ELF executed regardless of whether it has a PT_MIPS_ABIFLAGS program header. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.0+ Patchwork: http://patchwork.linux-mips.org/patch/9978/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 12 5月, 2015 1 次提交
-
-
由 Ralf Baechle 提交于
CC arch/mips/kernel/smp.o arch/mips/kernel/smp.c: In function ‘start_secondary’: arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(cpu, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’: arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(0, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘__cpu_up’: arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] while (!cpumask_test_cpu(cpu, &cpu_callin_map)) ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask) ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/smp.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 17 4月, 2015 2 次提交
-
-
由 Joshua Kinard 提交于
This modifies the IP32 (SGI O2) platform and reset code to utilize the new rtc-ds1685 driver. The old mc146818rtc.h header is removed and ip32_defconfig is updated as well. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
Switch to using the newly created asm-generic/seccomp.h for the seccomp strict mode syscall definitions. COMPAT definitions retain their overrides and the remaining definitions were identical. Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 4月, 2015 5 次提交
-
-
由 Kees Cook 提交于
The arch_randomize_brk() function is used on several architectures, even those that don't support ET_DYN ASLR. To avoid bulky extern/#define tricks, consolidate the support under CONFIG_ARCH_HAS_ELF_RANDOMIZE for the architectures that support it, while still handling CONFIG_COMPAT_BRK. Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
This fixes the "offset2lib" weakness in ASLR for arm, arm64, mips, powerpc, and x86. The problem is that if there is a leak of ASLR from the executable (ET_DYN), it means a leak of shared library offset as well (mmap), and vice versa. Further details and a PoC of this attack is available here: http://cybersecurity.upv.es/attacks/offset2lib/offset2lib.html With this patch, a PIE linked executable (ET_DYN) has its own ASLR region: $ ./show_mmaps_pie 54859ccd6000-54859ccd7000 r-xp ... /tmp/show_mmaps_pie 54859ced6000-54859ced7000 r--p ... /tmp/show_mmaps_pie 54859ced7000-54859ced8000 rw-p ... /tmp/show_mmaps_pie 7f75be764000-7f75be91f000 r-xp ... /lib/x86_64-linux-gnu/libc.so.6 7f75be91f000-7f75beb1f000 ---p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb1f000-7f75beb23000 r--p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb23000-7f75beb25000 rw-p ... /lib/x86_64-linux-gnu/libc.so.6 7f75beb25000-7f75beb2a000 rw-p ... 7f75beb2a000-7f75beb4d000 r-xp ... /lib64/ld-linux-x86-64.so.2 7f75bed45000-7f75bed46000 rw-p ... 7f75bed46000-7f75bed47000 r-xp ... 7f75bed47000-7f75bed4c000 rw-p ... 7f75bed4c000-7f75bed4d000 r--p ... /lib64/ld-linux-x86-64.so.2 7f75bed4d000-7f75bed4e000 rw-p ... /lib64/ld-linux-x86-64.so.2 7f75bed4e000-7f75bed4f000 rw-p ... 7fffb3741000-7fffb3762000 rw-p ... [stack] 7fffb377b000-7fffb377d000 r--p ... [vvar] 7fffb377d000-7fffb377f000 r-xp ... [vdso] The change is to add a call the newly created arch_mmap_rnd() into the ELF loader for handling ET_DYN ASLR in a separate region from mmap ASLR, as was already done on s390. Removes CONFIG_BINFMT_ELF_RANDOMIZE_PIE, which is no longer needed. Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NHector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
When an architecture fully supports randomizing the ELF load location, a per-arch mmap_rnd() function is used to find a randomized mmap base. In preparation for randomizing the location of ET_DYN binaries separately from mmap, this renames and exports these functions as arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE for describing this feature on architectures that support it (which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390 already supports a separated ET_DYN ASLR from mmap ASLR without the ARCH_BINFMT_ELF_RANDOMIZE_PIE logic). Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
In preparation for splitting out ET_DYN ASLR, extract the mmap ASLR selection into a separate function. Signed-off-by: NKees Cook <keescook@chromium.org> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 4月, 2015 1 次提交
-
-
由 Richard Weinberger 提交于
Signed-off-by: NRichard Weinberger <richard@nod.at>
-
- 10 4月, 2015 10 次提交
-
-
由 Markos Chandras 提交于
Commit 32098ec7 ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS") re-arranged the MIPS ASE detection code and also added the current cflags to the detection logic. However, this introduced a few bugs. First of all, the mips-cflags should not be quoted since that ends up being passed as a string to subsequent commands leading to broken detection from the cc-option-* tools. Moreover, in order to avoid duplicating the cflags-y because of how cc-option works, we rework the logic so we pass only those cflags which are needed by the selected ASE. Finally, fix some typos resulting in MSA not being detected correctly. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Fixes: Commit 32098ec7 ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS") Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9661/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
Set good default FPU flags (FR0) for O32 binaries similar to what the kernel does for the N64/N32 ones. This also fixes a regression introduced in commit 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") when MIPS_O32_FP64_SUPPORT is disabled. In that case, the mips_set_personality_fp() did not set the FPU mode at all because it assumed that the FPU mode was already set properly. That led to O32 userland problems. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Reported-by: NMans Rullgard <mans@mansr.com> Fixes: 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") Tested-by: NMans Rullgard <mans@mansr.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/9344/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Rafał Miłecki 提交于
Since the day of adding this code it was broken. We were iterating over a wrong array and checking for wrong NVRAM entry. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9654/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
A 64-bit build for Malta produces far too many build problems when SMP/CPS is selected. Moreover, there is currently no 64-bit product with SMP/CPS so we disable SMP/CPS when building for 64-bit until it is properly supported. Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8573/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Huacai Chen 提交于
We found that TLB mismatch not only happens after kernel resume, but also happens during snapshot restore. So move it to the beginning of swsusp_arch_suspend(). Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: <stable@vger.kernel.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9621/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Niklas Cassel 提交于
If we have an FPU, enroll ourselves in the FPU-full mask. Matching the MT_SMP and CMP implementations of smp_setup. Signed-off-by: NNiklas Cassel <niklass@axis.com> Cc: paul.burton@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8948/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
The lose_fpu() function only disables the FPU in CP0_Status.CU1 if the FPU is in use and MSA isn't enabled. This isn't necessarily a problem because KSTK_STATUS(current), the version of CP0_Status stored on the kernel stack on entry from user mode, does always get updated and gets restored when returning to user mode, but I don't think it was intended, and it is inconsistent with the case of only the FPU being in use. Sometimes leaving the FPU enabled may also mask kernel bugs where FPU operations are executed when the FPU might not be enabled. So lets disable the FPU in the MSA case too. Fixes: 33c771ba ("MIPS: save/disable MSA in lose_fpu") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9323/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
A driver was added in commit 5433acd8 ("MIPS: ralink: add illegal access driver") without the Kconfig section being added. Fix this by adding the symbol to the Kconfig file. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Reported-by: NPaul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9299/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
A wrong symbol is referenced by commit 187c26dd ("MIPS: ralink: add rt2880 pci driver"). Fix this by changing it to the correct symbol. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Reported-by: NPaul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9298/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Markos Chandras 提交于
memsize denotes the amount of RAM we can access from kseg{0,1} and that should be up to 256M. In case the bootloader reports a value higher than that (perhaps reporting all the available RAM) it's best if we fix it ourselves and just warn the user about that. This is usually a problem with the bootloader and/or its environment. [ralf@linux-mips.org: Remove useless parens as suggested bei Sergei. Reformat long pr_warn statement to fit into 80 column limit.] Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9362/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-