- 22 3月, 2017 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The source code line number (lineno) needs to be kept in accross calls to symbol__parse_objdump_line() when parsing the output of 'objdump -l -dS', so that it can associate it with the instructions till the next line. See disasm_line__new() and struct disasm_line::line_nr. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7hpx8f8ybdpiujceysaj229w@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Taeung Song 提交于
The 'grep -v "filename"' applied to the objdump command output cause a side effect eliminating filename:linenr of output of 'objdump -l' if the object file name and source file name are the same, fix it. E.g. the output of the following objdump command in symbol__disassemble(): $ objdump -l -d -S -C /home/taeung/hello --start-address=... /home/taeung/hello: file format elf64-x86-64 Disassembly of section .text: 0000000000400526 <main>: main(): /home/taeung/hello.c:4 void main() { 400526: 55 push %rbp 400527: 48 89 e5 mov %rsp,%rbp /home/taeung/hello.c:5 ... But it uses grep -v "filename" e.g. "/home/taeung/hello" in the objdump command to remove the first line containing file name and file format ("/home/taeung/hello: file format elf64-x86-64"): Before: $ objdump -l -d -S -C /home/taeung/hello | grep /home/taeung/hello But this causes a side effect, removing filename:linenr too, because the object file and source file have the same name e.g. "/home/taueng/hello", "/home/taeung/hello.c" So more do a better match by using grep -v as below to correctly remove that first line: "/home/taeung/hello: file format elf64-x86-64" After: $ objdump -l -d -S -C /home/taeung/hello | grep /home/taeung/hello: Signed-off-by: NTaeung Song <treeze.taeung@gmail.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1489978617-31396-5-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 3月, 2017 10 次提交
-
-
由 Ravi Bangoria 提交于
'perf probe' is failing for sdt markers whose arguments has rNN (with postfix b/w/d), %rsp, %esp, %sil etc. registers. Add renaming logic for these registers. Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexis Berlemont <alexis.berlemont@gmail.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170202111143.14319-3-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexis Berlemont 提交于
An sdt probe can be associated with arguments but they were not passed to the user probe tracing interface (uprobe_events); this patch adapts the sdt argument descriptors according to the uprobe input format. As the uprobe parser does not support scaled address mode, perf will skip arguments which cannot be adapted to the uprobe format. Here are the results: $ perf buildid-cache -v --add test_sdt $ perf probe -x test_sdt sdt_libfoo:table_frob $ perf probe -x test_sdt sdt_libfoo:table_diddle $ perf record -e sdt_libfoo:table_frob -e sdt_libfoo:table_diddle test_sdt $ perf script test_sdt ... 666.255678: sdt_libfoo:table_frob: (4004d7) arg0=0 arg1=0 test_sdt ... 666.255683: sdt_libfoo:table_diddle: (40051a) arg0=0 arg1=0 test_sdt ... 666.255686: sdt_libfoo:table_frob: (4004d7) arg0=1 arg1=2 test_sdt ... 666.255689: sdt_libfoo:table_diddle: (40051a) arg0=3 arg1=4 test_sdt ... 666.255692: sdt_libfoo:table_frob: (4004d7) arg0=2 arg1=4 test_sdt ... 666.255694: sdt_libfoo:table_diddle: (40051a) arg0=6 arg1=8 Signed-off-by: NAlexis Berlemont <alexis.berlemont@gmail.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20161214000732.1710-3-alexis.berlemont@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexis Berlemont 提交于
During a "perf buildid-cache --add" command, the section ".note.stapsdt" of the "added" binary is scanned in order to list the available SDT markers available in a binary. The parts containing the probes arguments were left unscanned. The whole section is now parsed; the probe arguments are extracted for later use. Signed-off-by: NAlexis Berlemont <alexis.berlemont@gmail.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20161214000732.1710-2-alexis.berlemont@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kefeng Wang 提交于
On old perf, when using 'perf probe -d' to delete an inexistent event, it returns errno, eg, -bash-4.3# perf probe -d xxx || echo $? Info: Event "*:xxx" does not exist. Error: Failed to delete events. 255 But now perf_del_probe_events() will always set ret = 0, different from previous del_perf_probe_events(). After this, it returns errno again, eg, -bash-4.3# ./perf probe -d xxx || echo $? "xxx" does not hit any event. Error: Failed to delete events. 254 And it is more appropriate to return -ENOENT instead of -EPERM. Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: dddc7ee3 ("perf probe: Fix an error when deleting probes successfully") Link: http://lkml.kernel.org/r/1489738592-61011-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ravi Bangoria 提交于
There are many SDT markers in powerpc whose uprobe definition goes beyond current MAX_CMDLEN, especially when target filename is long and sdt marker has long list of arguments. For example, definition of sdt marker method__compile__end: 8@17 8@9 8@10 -4@8 8@7 -4@6 8@5 -4@4 1@37(28) from file /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so is p:sdt_hotspot/method__compile__end /usr/lib/jvm/java-1.8.0-openjdk-\ 1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so:0x4c4e00\ arg1=%gpr17:u64 arg2=%gpr9:u64 arg3=%gpr10:u64 arg4=%gpr8:s32\ arg5=%gpr7:u64 arg6=%gpr6:s32 arg7=%gpr5:u64 arg8=%gpr4:s32\ arg9=+37(%gpr28):u8 'perf probe' fails with segfault for such markers. As the uprobe_events file accepts definitions up to 4094 characters(4096 - 2 (\n\0)), increase value of MAX_CMDLEN match that. Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexis Berlemont <alexis.berlemont@gmail.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170207054547.3690-1-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-4.12-20170320' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: Fixes: - Fix concat_probe_trace_events() in 'perf probe', it should dereference a pointer, not test its value (Ravi Bangoria) User visible changes: - Handle partial AUX records, checking if 'kvm_intel.ko' is loaded and if its 'vmm_exclusive' parameter is set to 0, suggesting tweaking it to reduce gaps (Alexander Shishkin) Infrastructure changes: - Sync the kvm.h, cpufeatures.h and perf_event.h tools/ headers copies with the kernel (Arnaldo Carvalho de Melo, Alexander Shishkin) - 'perf lock' subcommands should include common options, using OPT_PARENT() (Changbin Du) - Ditto for 'perf timechart' (Arnaldo Carvalho de Melo) Documentation changes: Correct 'perf stat --no-aggr' description (Ravi Bangoria) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Arnaldo Carvalho de Melo 提交于
The changes in the following csets are not relevant for what is used in tools/perf/arch/powerpc/util/kvm-stat.c, but lets sync it to silence the diff detector in the tools build system: c9270132 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU") 17d48610 ("KVM: PPC: Book 3S: XICS: Implement ICS P/Q states") Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ravi Bangoria 提交于
'*ntevs' contains number of elements present in 'tevs' array. If there are no elements in array, 'tevs2' can be directly assigned to 'tevs' without allocating more space. So the condition should be '*ntevs == 0' not 'ntevs == 0'. Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 42bba263 ("perf probe: Allow wildcard for cached events") Link: http://lkml.kernel.org/r/20170308065908.4128-1-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ravi Bangoria 提交于
Description of --no-aggr in perf-stat man page is outdated. --no-aggr can also be used while profiling specific set of cpus. For ex, $ perf stat -e cycles,instructions -C 1-2 --no-aggr -- sleep 1 Performance counter stats for 'CPU(s) 1-2': CPU1 5,94,92,795 cycles CPU2 2,69,72,403 cycles CPU1 2,02,08,327 instructions # 0.34 insn per cycle CPU2 73,17,123 instructions # 0.12 insn per cycle 1.000989132 seconds time elapsed Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1490013438-5713-1-git-send-email-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The changes in the following csets are not relevant for 'perf kvm' usage but lets sync it to silence the diff detector in the tools build system: e96a006c ("KVM: arm/arm64: vgic: Implement KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO ioctl") d017d7b0 ("KVM: arm/arm64: vgic: Implement VGICv3 CPU interface access") 94574c94 ("KVM: arm/arm64: vgic: Add distributor and redistributor access") Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Cc: Yunlong Song <yunlong.song@huawei.com> Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 3月, 2017 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used in the 'perf bench mem' benchmarks. The changes in the following csets are not relevant for this usecase, but lets sync it to silence the diff detector in the tools build system: 6fb89569 ("x86/cpufeature: Add 5-level paging detection") Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 3月, 2017 7 次提交
-
-
由 Alexander Shishkin 提交于
This patch decodes the 'partial' flag in AUX records and prints a warning to the user, so that they don't have to guess why their PT traces contain gaps (or missing altogether): Warning: AUX data had gaps in it 8 times out of 8! Are you running a KVM guest in the background? Trying to be even more helpful, we will detect if the user's kvm driver sets up exclusive VMX root mode for the entire lifespan of the kvm process: Reloading kvm_intel module with vmm_exclusive=0 will reduce the gaps to only guest's timeslices. Note however, that you'll still have gaps in cpu-wide traces even with vmm_exclusive=0, but the number of gaps will be below 100% (as opposed to the above example). Currently this is the only reason for partial records. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexander Shishkin 提交于
To get PERF_AUX_FLAG_PARTIAL, introduced in: ae0c2d99 ("perf/core: Add a flag for partial AUX records") and that will be used to warn the user about gaps in AUX records due to VMX being used in KVM guests. Silences the kernel/tools file copy detector: Warning: include/uapi/linux/perf_event.h differs from kernel Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com [ Split from a larger patch ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexander Shishkin 提交于
Will be used in a upcoming patch warning about PERF_RECORD_AUX data gaps, reading the "module/kvm_intel/parameters/vmm_exclusive" sysfs entry. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com [ split from a larger patch ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Move -T/--tasks-only and -P/--power-only options to a separate options array that then gets referenced via OPT_PARENT from the 'perf timechart' and 'perf timechart record' option arrays. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j80lol9wj1i6556ibh48iebe@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
All options need the -f/--force option, so move it to the array referenced via OPT_PARENT. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-unbeionpi58rioh4e9w8kp4n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Changbin Du 提交于
When I use -i option for report subcommand, it doesn't accept it. We need add common options using OPT_PARENT macro. perf lock report -i lock_perf.data Error: unknown switch `i' Usage: perf lock report [<options>] -f, --force don't complain, do it -k, --key <acquired> key for sorting ... Signed-off-by: NChangbin Du <changbin.du@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170317055342.8284-1-changbin.du@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-4.12-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction decoder used in the Intel PT code to study hot paths to samples (Andi Kleen) Kernel changes: - Default UPROBES_EVENTS to Y (Alexei Starovoitov) - Fix check for kretprobe offset within function entry (Naveen N. Rao) Infrastructure changes: - Introduce util func is_sdt_event() (Ravi Bangoria) - Make perf_event__synthesize_mmap_events() scale on older kernels where reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 16 3月, 2017 16 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
As it is already turned on by most distros, so just flip the default to Y. Suggested-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: NWang Nan <wangnan0@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anton Blanchard <anton@ozlabs.org> Cc: David Miller <davem@davemloft.net> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20170316005817.GA6805@ast-mbp.thefacebook.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
Implement printing instruction sequences as hex dump for branch stacks. This relies on the x86 instruction decoder used by the PT decoder to find the lengths of instructions to dump them individually. This is good enough for pattern matching. This allows to study hot paths for individual samples, together with branch misprediction and cycle count / IPC information if available (on Skylake systems). % perf record -b ... % perf script -F brstackinsn ... read_hpet+67: ffffffff9905b843 insn: 74 ea # PRED ffffffff9905b82f insn: 85 c9 ffffffff9905b831 insn: 74 12 ffffffff9905b833 insn: f3 90 ffffffff9905b835 insn: 48 8b 0f ffffffff9905b838 insn: 48 89 ca ffffffff9905b83b insn: 48 c1 ea 20 ffffffff9905b83f insn: 39 f2 ffffffff9905b841 insn: 89 d0 ffffffff9905b843 insn: 74 ea # PRED Only works when no special branch filters are specified. Occasionally the path does not reach up to the sample IP, as the LBRs may be frozen before executing a final jump. In this case we print a special message. The instruction dumper piggy backs on the existing infrastructure from the IP PT decoder. An earlier iteration of this patch relied on a disassembler, but this version only uses the existing instruction decoder. Committer note: Added hint about how to get suitable perf.data files for use with '-F brstackinsm': $ perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ] $ $ perf script -F brstackinsn Display of branch stack assembler requested, but non all-branch filter set Hint: run 'perf record -b ...' $ Signed-off-by: NAndi Kleen <ak@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: http://lkml.kernel.org/r/20170223234634.583-1-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used in the 'perf bench mem' benchmarks. The changes in the following csets are not relevant for this usecase, but lets sync it to silence the diff detector in the tools build system: 78d1b296 ("x86/cpu: Add X86_FEATURE_CPUID") 3bba73b1 ("x86/cpufeature: Move RING3MWAIT feature to avoid conflicts") Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexander Shishkin 提交于
Since commit: 1c5ac21a ("perf/x86/intel/pt: Don't die on VMXON") ... PT events depend on re-scheduling to get enabled after a VMX session has taken place. This is, in particular, a problem for CPU context events, which don't normally get re-scheduled, unless there is a reason. This patch changes the VMX handling so that PT event gets re-enabled when VMX root mode exits. Also, notify the user when there's a gap in PT data due to VMX root mode by flagging AUX records as partial. In combination with vmm_exclusive=0 parameter of the kvm_intel driver, this will result in trace gaps only for the duration of the guest's timeslices. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-5-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Alexander Shishkin 提交于
The Intel PT driver needs to be able to communicate partial AUX transactions, that is, transactions with gaps in data for reasons other than no room left in the buffer (i.e. truncated transactions). Therefore, this condition does not imply a wakeup for the consumer. To this end, add a new "partial" AUX flag. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-4-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Will Deacon 提交于
In preparation for adding more flags to perf AUX records, introduce a separate API for setting the flags for a session, rather than appending more bool arguments to perf_aux_output_end. This allows to set each flag at the time a corresponding condition is detected, instead of tracking it in each driver's private state. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-3-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kan Liang 提交于
Goldmont supports full Top Down level 1 metrics (FrontendBound, Retiring, Backend Bound and Bad Speculation). It has 3 wide pipeline. Signed-off-by: NKan Liang <kan.liang@intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1486711438-80058-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Four small fixes for this cycle: - followup fix from Neil for a fix that went in before -rc2, ensuring that we always see the full per-task bio_list. - fix for blk-mq-sched from me that ensures that we retain similar direct-to-issue behavior on running the queue. - fix from Sagi fixing a potential NULL pointer dereference in blk-mq on spurious CPU unplug. - a memory leak fix in writeback from Tahsin, fixing a case where device removal of a mounted device can leak a struct wb_writeback_work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly() writeback: fix memory leak in wb_queue_work() blk-mq: Fix tagset reinit in the presence of cpu hot-unplug blk: Ensure users for current->bio_list can see the full list.
-
由 Stephane Eranian 提交于
This patch significantly improves the execution time of perf_event__synthesize_mmap_events() when running perf record on systems where processes have lots of threads. It just happens that cat /proc/pid/maps support uses a O(N^2) algorithm to generate each map line in the maps file. If you have 1000 threads, then you have necessarily 1000 stacks. For each vma, you need to check if it corresponds to a thread's stack. With a large number of threads, this can take a very long time. I have seen latencies >> 10mn. As of today, perf does not use the fact that a mapping is a stack, therefore we can work around the issue by using /proc/pid/tasks/pid/maps. This entry does not try to map a vma to stack and is thus much faster with no loss of functonality. The proc-map-timeout logic is kept in case users still want some upper limit. In V2, we fix the file path from /proc/pid/tasks/pid/maps to actual /proc/pid/task/pid/maps, tasks -> task. Thanks Arnaldo for catching this. Committer note: This problem seems to have been elliminated in the kernel since commit : b18cb64e ("fs/proc: Stop trying to report thread stacks"). Signed-off-by: NStephane Eranian <eranian@google.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170315135059.GC2177@redhat.com Link: http://lkml.kernel.org/r/1489598233-25586-1-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Naveen N. Rao 提交于
perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ravi Bangoria 提交于
Factor out the SDT event name checking routine as is_sdt_event(). Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170314150658.7065-2-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-4.12-20170314' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Add PERF_RECORD_NAMESPACES so that the kernel can record information required to associate samples to namespaces, helping in container problem characterization. Now the 'perf record has a --namespace' option to ask for such info, and when present, it can be used, initially, via a new sort order, 'cgroup_id', allowing histogram entry bucketization by a (device, inode) based cgroup identifier (Hari Bathini) - Add --next option to 'perf sched timehist', showing what is the next thread to run (Brendan Gregg) Fixes: - Fix segfault with basic block 'cycles' sort dimension (Changbin Du) - Add c2c to command-list.txt, making it appear in the 'perf help' output (Changbin Du) - Fix zeroing of 'abs_path' variable in the perf hists browser switch file code (Changbin Du) - Hide tips messages when -q/--quiet is given to 'perf report' (Namhyung Kim) Infrastructure changes: - Use ref_reloc_sym + offset to setup kretprobes (Naveen Rao) - Ignore generated files pmu-events/{jevents,pmu-events.c} for git (Changbin Du) Documentation changes: - Document +field style argument support for --field option (Changbin Du) - Clarify 'perf c2c --stats' help message (Namhyung Kim) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2由 Linus Torvalds 提交于
Pull gfs2 fix from Bob Peterson: "This is an emergency patch for 4.11-rc3 The GFS2 developers uncovered a really nasty problem that can lead to random corruption and kernel panic, much like the last one. Andreas Gruenbacher wrote a simple one-line patch to fix the problem." * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Avoid alignment hole in struct lm_lockname
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - self-test failure of crc32c on powerpc - regressions of ecb(aes) when used with xts/lrw in s5p-sss - a number of bugs in the omap RNG driver * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix spinlock recursion on LRW(AES) hwrng: omap - Do not access INTMASK_REG on EIP76 hwrng: omap - use devm_clk_get() instead of of_clk_get() hwrng: omap - write registers after enabling the clock crypto: s5p-sss - Fix completing crypto request in IRQ handler crypto: powerpc - Fix initialisation of crc32c context
-
- 15 3月, 2017 4 次提交
-
-
由 Andreas Gruenbacher 提交于
Commit 88ffbf3e switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Three cgroup fixes. Nothing critical: - the pids controller could trigger suspicious RCU warning spuriously. Fixed. - in the debug controller, %p -> %pK to protect kernel pointer from getting exposed. - documentation formatting fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroups: censor kernel pointer in debug files cgroup/pids: remove spurious suspicious RCU usage warning cgroup: Fix indenting in PID controller documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Three libata fixes: - fix for a circular reference bug in sysfs code which prevented pata_legacy devices from being released after probe failure, which in turn prevented devres from releasing the associated resources. - drop spurious WARN in the command issue path which can be triggered by a legitimate passthrough command. - an ahci_qoriq specific fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: qoriq: correct the sata ecc setting error libata: drop WARN from protocol error in ata_sff_qc_issue() libata: transport: Remove circular dependency at free time
-