1. 31 7月, 2015 2 次提交
  2. 21 7月, 2015 2 次提交
  3. 11 7月, 2015 3 次提交
  4. 07 7月, 2015 1 次提交
    • A
      x86/entry, selftests/x86: Add a test for 32-bit fast syscall arg faults · 5e5c684a
      Andy Lutomirski 提交于
      This test passes on 4.0 and fails on some newer kernels.
      Fortunately, the failure is likely not a big deal.
      
      This test will make sure that we don't break it further (e.g. OOPSing)
      as we clean up the entry code and that we eventually fix the
      regression.
      
      There's arguably no need to preserve the old ABI here --
      anything that makes it into a fast (vDSO) syscall with a bad
      stack is about to crash no matter what we do.
      Signed-off-by: NAndy Lutomirski <luto@kernel.org>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: Denys Vlasenko <vda.linux@googlemail.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: paulmck@linux.vnet.ibm.com
      Link: http://lkml.kernel.org/r/9cfcc51005168cb1b06b31991931214d770fc59a.1435952415.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      5e5c684a
  5. 26 6月, 2015 2 次提交
    • D
      libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only · 58138820
      Dan Williams 提交于
      Upon detection of an unarmed dimm in a region, arrange for descendant
      BTT, PMEM, or BLK instances to be read-only.  A dimm is primarily marked
      "unarmed" via flags passed by platform firmware (NFIT).
      
      The flags in the NFIT memory device sub-structure indicate the state of
      the data on the nvdimm relative to its energy source or last "flush to
      persistence".  For the most part there is nothing the driver can do but
      advertise the state of these flags in sysfs and emit a message if
      firmware indicates that the contents of the device may be corrupted.
      However, for the case of ACPI_NFIT_MEM_ARMED, the driver can arrange for
      the block devices incorporating that nvdimm to be marked read-only.
      This is a safe default as the data is still available and new writes are
      held off until the administrator either forces read-write mode, or the
      energy source becomes armed.
      
      A 'read_only' attribute is added to REGION devices to allow for
      overriding the default read-only policy of all descendant block devices.
      Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      58138820
    • D
      tools/testing/nvdimm: libnvdimm unit test infrastructure · 6bc75619
      Dan Williams 提交于
      'libnvdimm' is the first driver sub-system in the kernel to implement
      mocking for unit test coverage.  The nfit_test module gets built as an
      external module and arranges for external module replacements of nfit,
      libnvdimm, nd_pmem, and nd_blk.  These replacements use the linker
      --wrap option to redirect calls to ioremap() + request_mem_region() to
      custom defined unit test resources.  The end result is a fully
      functional nvdimm_bus, as far as userspace is concerned, but with the
      capability to perform otherwise destructive tests on emulated resources.
      
      Q: Why not use QEMU for this emulation?
      QEMU is not suitable for unit testing.  QEMU's role is to faithfully
      emulate the platform.  A unit test's role is to unfaithfully implement
      the platform with the goal of triggering bugs in the corners of the
      sub-system implementation.  As bugs are discovered in platforms, or the
      sub-system itself, the unit tests are extended to backstop a fix with a
      reproducer unit test.
      
      Another problem with QEMU is that it would require coordination of 3
      software projects instead of 2 (kernel + libndctl [1]) to maintain and
      execute the tests.  The chances for bit rot and the difficulty of
      getting the tests running goes up non-linearly the more components
      involved.
      
      
      Q: Why submit this to the kernel tree instead of external modules in
         libndctl?
      Simple, to alleviate the same risk that out-of-tree external modules
      face.  Updates to drivers/nvdimm/ can be immediately evaluated to see if
      they have any impact on tools/testing/nvdimm/.
      
      
      Q: What are the negative implications of merging this?
      It is a unique maintenance burden because the purpose of mocking an
      interface to enable a unit test is to purposefully short circuit the
      semantics of a routine to enable testing.  For example
      __wrap_ioremap_cache() fakes the pmem driver into "ioremap()'ing" a test
      resource buffer allocated by dma_alloc_coherent().  The future
      maintenance burden hits when someone changes the semantics of
      ioremap_cache() and wonders what the implications are for the unit test.
      
      [1]: https://github.com/pmem/ndctl
      
      Cc: <linux-acpi@vger.kernel.org>
      Cc: Lv Zheng <lv.zheng@intel.com>
      Cc: Robert Moore <robert.moore@intel.com>
      Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      6bc75619
  6. 23 6月, 2015 1 次提交
    • S
      selftests: add quicktest support · 2278e5ed
      Shuah Khan 提交于
      Add quicktest support to enable users to choose to run
      tests that complete in a short time. Choosing this option
      excludes tests that take longer time complete e.g: timers.
      User can specify quicktest option from kernel top level or
      selftests directory.
      
      Kernel top level directory:
      make quicktest=1 kselftest
      
      tools/testing/selftests directory:
      make quicktest=1 run_tests
      Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
      2278e5ed
  7. 19 6月, 2015 1 次提交
    • S
      powerpc/tm: Abort syscalls in active transactions · b4b56f9e
      Sam bobroff 提交于
      This patch changes the syscall handler to doom (tabort) active
      transactions when a syscall is made and return very early without
      performing the syscall and keeping side effects to a minimum (no CPU
      accounting or system call tracing is performed). Also included is a
      new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
      behaviour to userspace.
      
      Currently, the system call instruction automatically suspends an
      active transaction which causes side effects to persist when an active
      transaction fails.
      
      This does change the kernel's behaviour, but in a way that was
      documented as unsupported.  It doesn't reduce functionality as
      syscalls will still be performed after tsuspend; it just requires that
      the transaction be explicitly suspended.  It also provides a
      consistent interface and makes the behaviour of user code
      substantially the same across powerpc and platforms that do not
      support suspended transactions (e.g. x86 and s390).
      
      Performance measurements using
      http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
      a normal (non-aborted) system call increases by about 0.25%.
      Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
      Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      b4b56f9e
  8. 18 6月, 2015 2 次提交
  9. 12 6月, 2015 1 次提交
  10. 07 6月, 2015 8 次提交
  11. 02 6月, 2015 1 次提交
  12. 30 5月, 2015 1 次提交
  13. 28 5月, 2015 11 次提交
  14. 27 5月, 2015 4 次提交