The audio module requested in driver differs with module
created by Makefile. Makefile is corrected to create the same module name
required by driver. Also, corrected the strings that shows wrong name.
Signed-off-by: NSrinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

An earlier commit accidentally broke the detection of the cx25837 part of
the cx23885. Reinstated the commented out code.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

changed the pcb-config.c/h to pcb-cfg.c/h for short names.
Signed-off-by: NSrinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixes several CodingStyle issues on the driver.
Signed-off-by: NSrinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Only cx231xx-video needs linux/version.h, due to KERNEL_VERSION macro,
that is used by V4L2 API.

This patch moves the KERNEL_VERSION to its proper place and starts with
0,0,1.

There are still much more to be fixed on later patches
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch cleans up CodingStyle on the following source files:

There are still much more to be fixed on later patches
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSrinivasa Deevi <srinivasa.deevi@conexant.com>
[mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

cx231xx has a cx25840 inside the chip. However, some different
initializations are used for this variant.
Signed-off-by: NSrinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If usb_interface.dev is used as dev parameter for v4l2_device_register
v4l2_dev.name contains the v4l driver/module name and usb device and
interface instead of a simple "usb x-y".
It also matches the recommendation to set the parent devices for usb
drivers.
Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs.

 create mode 100644 arch/arm/mach-mx1/ksym_mx1.c
 create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S
 create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h
 create mode 100644 drivers/media/video/mx1_camera.c
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With the i.MX31 transition to clkdev clock names have changed, but mistakenly
the "mx3-camera.0" has been registered with a non-NULL connection ID, which is
not necessary, since this is the only clock, used by the capture interface
driver. Fix the clock definition and the driver to use NULL as a connection ID.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use platform power hook to turn the camera on and off.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Patch to provide basic support for DigitalNow TinyTwin Remote. It uses
same remote as TwinHan AzureWave AD-TU700(704J).
Signed-off-by: NStuart Hall <mailing-lists@enginuities.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Setup the i2c clock speed to be definable on a per-board basis.  This allows
us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid
of code which sets it on a basis of what chip the i2c master is talking to
at any given time (which could have caused issues because i2c slaves should
never receive commands at a clock higher than their supported clock speed).
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Change the #define entries for the i2c registers to be more meaningful, and
document the valid values for the registers.  Note that this changeset makes
*no* functional changes to the code.
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (07ca:850a) and configuration hack for AverMedia AVerTV Volar
Black HD (A850) DVB-T USB stick.
Tested-by: NOlivier MENUEL <omenuel@laposte.net>
Tested-by: NThomas Renard <threnard@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove wrong GPIO definitions. GPIOs used by AF9015 are	property of the
AF9013 demodulator and are coming from there.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (15a4:901b) and remote for TrekStor DVB-T USB Stick.
Signed-off-by: NMarc Schneider <macke@macke.org>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add new USB ID (1b80:e395) for KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
Thanks to Julian Aron Prenner <julian@linux4you.it> for reporting this.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove experimental from DVB USB AF9015 device.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Any time a struct (especially one not defined by this driver) is
allocated, we MUST zero its underlying storage.  This makes our usage
of the struct predictable and robust against future changes where
fields might be added that we don't know about.  Failing to do this
with tuner_setup left the config field uninitialized which then caused
trouble with the tuner type used for HVR-1950 devices.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Converted em28xx driver to v4l2_subdev.
Thanks to Hans Verkuil <hverkuil@xs4all.nl> for helping this conversion.
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following patch fixes a few bugs I've noticed in the V4L1
compatibility layer:
- VIDEO_MODE_AUTO for get/set input ioctls was not being handled
- wrong V4L2 ioctl being used in v4l1_compat_select_tuner
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The CE6230 DVB USB driver works correctly for the AVerMedia A310 USB2.0
DVB-T tuner. Add the required USB ID's and hardware names so that the
driver will handle it.
Signed-off-by: NJuan Jesús García de Soria Lucena <skandalfo@gmail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

MT9M001 datasheet says, that the data is ready on the falling edge of the pixel
clock, but the driver wrongly sets the SOCAM_PCLK_SAMPLE_RISING flag. Changing
this doesn't seem to produce any visible difference, still, it is better to
comply to the datasheet.
Reported-by: NSascha Oppermann <oppermann@garage-computers.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

soc-camera re-uses struct devices multiple times in calls to device_register(),
therefore it has to reset the embedded struct kobject to avoid the "tried to
init an initialized object" error, which then also erases its name. Now with
the transition to kobject's name for device names, we have to re-initialise the
name before each call to device_register().
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

priv->client->dev.platrom_data mean ov772x_camera_info in ov772x driver.
So, struct soc_camera_link doesn't exist there.
This patch modify this bug.
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

pxa_dma_update_sg_tail() is called only once, runs exactly the same loop as the
caller and has to recalculate the last element in an sg-list, that the caller
has already calculated. Eliminate redundancy by merging the two loops and
re-using the calculated pointer. This also saves a bit of performance which is
always good during video-capture.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The last buffer queued will often overrun, as the DMA chain
is finished, and the time the dma irq handler is activated,
the QCI fifos are filled by the sensor.

The fix is to ignore the overrun condition on the last
queued buffer, and restart the capture only on intermediate
buffers of the chain.

Moreover, a fix was added to the very unlikely condition
where in YUV422P mode, one channel overruns while another
completes at the very same time. The capture is restarted
after the overrun as before, but the other channel
completion is now ignored.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The DMA transfers in pxa_camera showed some weaknesses in
multiple queued buffers context :
 - poll/select problem
   The bug shows up with capture_example tool from v4l2 hg
   tree. The process just "stalls" on a "select timeout".

 - multiple buffers DMA starting
   When multiple buffers were queued, the DMA channels were
   always started right away. This is not optimal, as a
   special case appears when the first EOF was not yet
   reached, and the DMA channels were prematurely started.

 - Maintainability
   DMA code was a bit obfuscated. Rationalize the code to be
   easily maintainable by anyone.

 - DMA hot chaining
   DMA is not stopped anymore to queue a buffer, the buffer
   is queued with DMA running. As a tribute, a corner case
   exists where chaining happens while DMA finishes the
   chain, and the capture is restarted to deal with the
   missed link buffer.

This patch attemps to address these issues / improvements.

 create mode 100644 Documentation/video4linux/pxa_camera.txt
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All planes were PAGE aligned (ie. 4096 bytes aligned). This
is not consistent with YUV422 format, which requires Y, U
and V planes glued together.  The new implementation forces
the alignement on 8 bytes (DMA requirement), which is almost
always the case (granted by width x height being a multiple
of 8).

The test cases include tests in both YUV422 and RGB565 :
 - a picture of size 111 x 111 (cross RAM pages example)
 - a picture of size 1023 x 4 in (under 1 RAM page)
 - a picture of size 1024 x 4 in (exactly 1 RAM page)
 - a picture of size 1025 x 4 in (over 1 RAM page)
 - a picture of size 1280 x 1024 (many RAM pages)
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Due to DMA constraints, the DMA chain always transfers bytes
from the QCI fifos to memory in 8 bytes units. In planar
formats, that could mean 0 padding between Y and U plane
(and between U and V plane), which is against YUV422P
standard.

Therefore, a frame size is required to be a multiple of 16
(so U plane size is a multiple of 8). It is enforced in
try_fmt() and set_fmt() primitives, be aligning height then
width on 4 multiples as need be, to reach a 16 multiple.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

CUSTOMISE appears to be the one actually defined...
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* 'audit.b62' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  Audit: remove spaces from audit_log_d_path
  audit: audit_set_auditable defined but not used
  audit: incorrect ref counting in audit tree tag_chunk
  audit: Fix possible return value truncation in audit_get_context()
  audit: ignore terminating NUL in AUDIT_USER_TTY messages
  Audit: fix handling of 'strings' with NULL characters
  make the e->rule.xxx shorter in kernel auditfilter.c
  auditsc: fix kernel-doc notation
  audit: EXECVE record - removed bogus newline