- 01 5月, 2008 2 次提交
-
-
由 Sam Ravnborg 提交于
Silence the following warnings: WARNING: drivers/pcmcia/built-in.o(.data+0x6e8): Section mismatch in reference from the variable pcmcia_bus_interface to the function .devinit.text:pcmcia_bus_add_socket() WARNING: drivers/pcmcia/built-in.o(.data+0xa88): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devinit.text:pccard_sysfs_add_rsrc() WARNING: drivers/pcmcia/built-in.o(.data+0xa90): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devexit.text:pccard_sysfs_remove_rsrc() The variables of type class_interface contains references to __devinit and __devexit functions which is OK. Silence warnings by annotating the variables with __refdata. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Make the PCMCIA core stop using class_interface to hide socket attribute registration. This removes the associated section mismatch warnings, and helps get to the point where that mechanism can finally be removed. Simplify that attribute registration by using an attribute_group. This is a net shrink in object size. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 4月, 2008 1 次提交
-
-
argh. A hunk got lost from "proc: remove proc_bus" Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 4月, 2008 2 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the availability of an asm/ide.h It turns out this was done for ARM, and we can simply always select HAVE_IDE on ARM instead of manually tracking which platforms might possible have an IDE controller directly or indirectly. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 21 4月, 2008 1 次提交
-
-
由 Russell King 提交于
Place the dependency against the correct config symbol. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 4月, 2008 2 次提交
-
-
由 Russell King 提交于
Not all PXA2xx platforms provide the necessary support files for PCMCIA to work, let alone build. Stop the build errors by making PXA2xx PCMCIA support only available on those platforms which have supplied the support files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
two reasons: 1. GPIO namings and their mode definitions are conceptually not part of the PXA register definitions 2. this is actually a temporary move in the transition of PXA2xx to use MFP-alike APIs (as what PXA3xx is now doing), so that legacy code will still work and new code can be added in step by step Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 4月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable PCMCIA platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 2月, 2008 1 次提交
-
-
由 Andrew Morton 提交于
drivers/pcmcia/i82092.c: In function 'i82092aa_set_mem_map': drivers/pcmcia/i82092.c:650: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' drivers/pcmcia/i82092.c:650: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t' Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 2月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NRussell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 06 2月, 2008 7 次提交
-
-
由 Julia Lawall 提交于
pci_get_slot does a pci_dev_get, so pci_dev_put needs to be called in an error case. An extract of the semantic match used to find the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type find1.T,T1,T2; identifier find1.E; statement find1.S; expression x1,x2,x3; expression find1.test; int ret != 0; @@ T E; ... ( * E = pci_get_slot(...); if (E == NULL) S | * if ((E = pci_get_slot(...)) == NULL) S ) ... when != pci_dev_put(...,(T1)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (test) { ... when != pci_dev_put(...,(T2)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
of_iomap calls ioremap, and so should be matched with an iounmap. At the two error returns, the result of calling of_iomap is only stored in a local variable, so these error paths need to call iounmap. Furthermore, this function ultimately stores the result of of_iomap in an array that is local to the file. These values should be iounmapped at some point. I have added a corresponding call to iounmap at the end of the function m8xx_remove. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = of_iomap(...); if (E == NULL) S ... when != iounmap(...,(T1)E,...) when != if (E != NULL) { ... iounmap(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != iounmap(...,(T2)E,...) when != if (E != NULL) { ... iounmap(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Vitaly Bordug <vitb@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Update the AT91 CF driver to use the generic GPIO calls instead of the AT91-specific ones; and request exclusive use of those signals. Minor tweaks to cleanup code paths: always in reverse order of how the resources were allocated, with remove() matching the fault paths of probe(). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
- Print the invalid CIS filename in the invalid filename message. - Use sizeof() instead of hard-coded constant for buffer size. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
This stops the pcmcia core from using dev->power.power_state; that field is deprecated (overdue for removal) and the only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Convert the io_req_t members to unsigned int, to allow use on machines with more than 16 bits worth of IO ports (i.e. secondary busses on ppc64, etc). There was only a couple of places in drivers where a change was needed. I left printk formats alone (there are lots of %04x-style formats in there), mostly to not change the format on the platforms that only have 16-bit io addresses, but also because the padding doesn't really add all that much value most of the time. I found only one sprintf of an address, and upsized the string accordingly (I doubt anyone will have anywhere near INT_MAX as irq value, but at least there's room for it now). Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 2月, 2008 1 次提交
-
-
由 Kristoffer Ericson 提交于
Warning message : WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove') WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove') * fixes the 'section mismatch' building warnings for target sa1100. Solution is __init -> __devinit. Thanks to Randy Dunlap for pointing out the solution. Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 2月, 2008 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 26 1月, 2008 1 次提交
-
-
由 Russell King 提交于
PXA3 has a different memory controller from PXA2 platforms. Avoid clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 1月, 2008 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 12月, 2007 1 次提交
-
-
由 David Brownell 提交于
Init section confusion. There will likely be some other similar issues, introduced by I'm-not-sure-what-patch. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 12月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Fix kernel-doc comments in drivers/pcmcia/: - ti113x.h does not contain kernel-doc, so don't use /** to begin a doc comment - yenta_socket.c: remove /** on non-kernel-doc comments; escape the ':' in an "http:" comment so that it won't be treated as a section heading; - cs.c: remove /** on non-kernel-doc comments & add function parameter info - ds.c: fix function parameter info Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 10月, 2007 1 次提交
-
-
由 Jiri Slaby 提交于
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 6 次提交
-
-
由 Olof Johansson 提交于
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's a simple device sitting on localbus, with interrupts and detect/voltage control over GPIO. The driver is implemented as an of_platform driver, and adds localbus as a bus being probed by the of_platform framework. [akpm@linux-foundation.org: cleanups] [olof@lixom.net: fix build] Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@infradead.org> Cc: Milton Miller <miltonm@bga.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Bottomley 提交于
Most non cardbus devices can't do dma, so flag them as such in the device creation routine. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Ritz 提交于
Based on a patch by Haavard Skinnemoen posted to linux-pcmcia, but using static inlines for readability reasons. this should fix PCMCIA an AVR32 Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yoichi Yuasa 提交于
Only a few definitions is in xxs1500.h . They can be move to au1000_xxs1500.c . [m.kozlowski@tuxland.pl: fix unbalanced parenthesis] Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Milan Plzik 提交于
Recently I've been trying to get working PCMCIA interface on H5000 ipaq series, using dual PCMCIA sleeve. So far things work correctly, but I had to do one modification to drivers/pcmcia/pxa2xx_base.c to get the interface working with orinoco gold PCMCIA card (wired pcnet_cs ethernet card worked even without this modification). The issue has something to do with assert time on PCMCIA bus, but I'm not really sure what -- I found the working value just by trial&error approach. I'm not sure how is the assert value in pxa2xx_mcxx_asst calculated (I know, simple formula, but the reason why is it calculated that way is not obvious for me), neither that my modification is correct. It just works with iPAQ. Cc: Russell King <rmk@arm.linux.org.uk> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 10月, 2007 3 次提交
-
-
由 Mike Rapoport 提交于
This patch provides support for PCMCIA on CM-X270 Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 10月, 2007 1 次提交
-
-
由 Al Viro 提交于
... should be unsigned int Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2007 2 次提交
-
-
由 Kay Sievers 提交于
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Prefix platform modalias strings with "platform:", which modprobe config to blacklist alias resolving if userspace configures it. Send uevents for all platform devices. Add MODULE_ALIAS's to: pxa2xx_pcmcia, ds1742 and pcspkr to trigger module autoloading by userspace. $ modinfo pcspkr alias: platform:pcspkr license: GPL description: PC Speaker beeper driver ... $ modprobe -n -v platform:pcspkr insmod /lib/modules/2.6.23-rc3-g28e8351a-dirty/kernel/drivers/input/misc/pcspkr.ko Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 8月, 2007 1 次提交
-
-
由 Daniel Ritz 提交于
Give sockets up to 100ms of additional time to power down. otherwise we might generate false warnings with KERN_ERR priority (like in bug #8262). Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Nils Neumann <nils.neumann@rwth-aachen.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 19 7月, 2007 1 次提交
-
-
由 Alan Stern 提交于
This patch (as933) removes the deprecated dpm_runtime_suspend() and dpm_runtime_resume() routines from the PM core. The only user of those routines is the PCMCIA ds driver; local replacements are added. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-