- 08 3月, 2010 1 次提交
-
-
由 Emese Revfy 提交于
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NDavid Teigland <teigland@redhat.com> Acked-by: NMatt Domsch <Matt_Domsch@dell.com> Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: NHans J. Koch <hjk@linutronix.de> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NJens Axboe <jens.axboe@oracle.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 9月, 2009 1 次提交
-
-
由 Andreas Herrmann 提交于
Fix following compile warning: arch/x86/kernel/cpu/mcheck/mce_amd.c: In function 'threshold_create_bank': arch/x86/kernel/cpu/mcheck/mce_amd.c:492: warning: unused variable 'c' which shows up when kernel is compiled with CONFIG_SMP=n. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20090915151727.GB21670@alberich.amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 9月, 2009 1 次提交
-
-
由 Andreas Herrmann 提交于
This fixes threshold_bank4 support on multi-node processors. The correct mask to use is llc_shared_map, representing an internal node on Magny-Cours. We need to create 2 sets of symlinks for sibling shared banks -- one set for each internal node, symlinks of each set should target the first core on same internal node. Currently only one set is created where all symlinks are targeting the first core of the entire socket. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 24 6月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
Currently, the following three different ways to define percpu arrays are in use. 1. DEFINE_PER_CPU(elem_type[array_len], array_name); 2. DEFINE_PER_CPU(elem_type, array_name[array_len]); 3. DEFINE_PER_CPU(elem_type, array_name)[array_len]; Unify to #1 which correctly separates the roles of the two parameters and thus allows more flexibility in the way percpu variables are defined. [ Impact: cleanup ] Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: linux-mm@kvack.org Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net>
-
- 17 6月, 2009 1 次提交
-
-
由 Hidetoshi Seto 提交于
Rename files that are no longer 64bit specific: mce_amd_64.c => mce_amd.c mce_intel_64.c => mce_intel.c Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 29 5月, 2009 4 次提交
-
-
由 Hidetoshi Seto 提交于
Fix for followings: WARNING: Use #include <linux/percpu.h> instead of <asm/percpu.h> +#include <asm/percpu.h> ERROR: Macros with multiple statements should be enclosed in a do - while loop +#define THRESHOLD_ATTR(_name, _mode, _show, _store) \ +{ \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; WARNING: usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc + if (cpu >= NR_CPUS) Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Hidetoshi Seto 提交于
Use strict_strtoull instead of simple_strtoull. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Ingo Molnar 提交于
Shorten variable names. This also compacts the code a bit. device_mce => mce_dev mce_device_initialized => mce_dev_initialized mce_attribute => mce_attrs [ Impact: cleanup ] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Ingo Molnar 提交于
Make the coding style match that of the rest of the x86 arch code. [ Impact: cleanup ] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 3月, 2009 1 次提交
-
-
由 Andrew Morton 提交于
Attempting to rid us of the problematic work_on_cpu(). Just use smp_call_function_single() here. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090318042217.EF3F1DDF39@ozlabs.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 3月, 2009 1 次提交
-
-
由 Rusty Russell 提交于
Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y In most places it's cleaner to use the accessors cpu_sibling_mask() and cpu_core_mask() wrappers which already exist. I couldn't avoid cleaning up the access in oprofile, either. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 25 2月, 2009 2 次提交
-
-
由 Andi Kleen 提交于
Define a per cpu bitmap that contains the banks polled by the machine check poller. This is needed for the CMCI code in the next patches to be able to disable polling on specific banks. The bank by default contains all banks, so there is no behaviour change. Only future code will remove some banks from the polling set. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Andi Kleen 提交于
Impact: cleanup; preparation for feature The mce_amd_64 code has an own private MC threshold vector with an own interrupt handler. Since Intel needs a similar handler it makes sense to share the vector because both can not be active at the same time. I factored the common APIC handler code into a separate file which can be used by both the Intel or AMD MC code. This is needed for the next patch which adds an Intel specific CMCI handler. This patch should be a nop for AMD, it just moves some code around. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 21 2月, 2009 1 次提交
-
-
由 H. Peter Anvin 提交于
Impact: Bug fix on UP Checkin 6ec68bff: x86, mce: reinitialize per cpu features on resume introduced a call to mce_cpu_features() in the resume path, in order for the MCE machinery to get properly reinitialized after a resume. However, this function (and its successors) was flagged __cpuinit, which becomes __init on UP configurations (on SMP suspend/resume requires CPU hotplug and so this would not be seen.) Remove the offending __cpuinit annotations for mce_cpu_features() and its successor functions. Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 20 2月, 2009 2 次提交
-
-
由 Andi Kleen 提交于
Impact: cleanup, performance enhancement The machine check poller is diverging more and more from the fatal exception handler. Instead of adding more special cases separate the code paths completely. The corrected poll path is actually quite simple, and this doesn't result in much code duplication. This makes both handlers much easier to read and results in cleaner code flow. The exception handler now only needs to care about uncorrected errors, which also simplifies the handling of multiple errors. The corrected poller also now always runs in standard interrupt context and does not need to do anything special to handle NMI context. Minor behaviour changes: - MCG status is now not cleared on polling. - Only the banks which had corrected errors get cleared on polling - The exception handler only clears banks with errors now v2: Forward port to new patch order. Add "uc" argument. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andi Kleen 提交于
Impact: cleanup This merely factors out duplicated code to set up the initial struct mce state into a single function. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 18 2月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
Impact: cleanup Remove genapic.h and remove all references to it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 2月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: cleanup make it simpler, don't need have one extra struct. v2: fix the sgi_uv build Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 1月, 2009 1 次提交
-
-
由 Mike Travis 提交于
Impact: Reduce memory usage, use new cpumask API. Use cpumask_var_t for 'cpus' cpumask in struct threshold_bank and update remaining old cpumask_t functions to new cpumask API. Signed-off-by: NMike Travis <travis@sgi.com>
-
- 07 1月, 2009 1 次提交
-
-
由 Leonardo Potenza 提交于
Mark the function local_allocate_threshold_blocks() with __cpuinit, in order to remove the following section mismatch messages: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1363): Section mismatch in reference from the function local_allocate_threshold_blocks() to the function .cpuinit.text:allocate_threshold_blocks() The function local_allocate_threshold_blocks() references the function __cpuinit allocate_threshold_blocks(). This is often because local_allocate_threshold_blocks lacks a __cpuinit annotation or the annotation of allocate_threshold_blocks is wrong. WARNING: arch/x86/kernel/cpu/built-in.o(.text+0x1def): Section mismatch in reference from the function local_allocate_threshold_blocks() to the function .cpuinit.text:allocate_threshold_blocks() The function local_allocate_threshold_blocks() references the function __cpuinit allocate_threshold_blocks(). This is often because local_allocate_threshold_blocks lacks a __cpuinit annotation or the annotation of allocate_threshold_blocks is wrong. WARNING: arch/x86/kernel/built-in.o(.text+0xef2b): Section mismatch in reference from the function local_allocate_threshold_blocks() to the function .cpuinit.text:allocate_threshold_blocks() The function local_allocate_threshold_blocks() references the function __cpuinit allocate_threshold_blocks(). This is often because local_allocate_threshold_blocks lacks a __cpuinit annotation or the annotation of allocate_threshold_blocks is wrong. All the callsites of this function are __cpuinit already, and all the functions it calls are __cpuinit as well. Signed-off-by: NLeonardo Potenza <lpotenza@inwind.it> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 12月, 2008 2 次提交
-
-
由 Mike Travis 提交于
Impact: Remove cpumask_t's from stack. Simple transition to work_on_cpu(), rather than cpumask games. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Robert Richter <robert.richter@amd.com> Cc: jacob.shin@amd.com
-
由 Hiroshi Shimamoto 提交于
Impact: cleanup Replace incrementing irq stat with inc_irq_stat() in non-unified functions. Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 8月, 2008 1 次提交
-
-
由 Rafael J. Wysocki 提交于
During CPU hot-remove the sysfs directory created by threshold_create_bank(), defined in arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before its parent directory, created by mce_create_device(), defined in arch/x86/kernel/cpu/mcheck/mce_64.c . Moreover, when the CPU in question is hotplugged again, obviously the latter has to be created before the former. At present, the right ordering is not enforced, because all of these operations are carried out by CPU hotplug notifiers which are not appropriately ordered with respect to each other. This leads to serious problems on systems with two or more multicore AMD CPUs, among other things during suspend and hibernation. Fix the problem by placing threshold bank CPU hotplug callbacks in mce_cpu_callback(), so that they are invoked at the right places, if defined. Additionally, use kobject_del() to remove the sysfs directory associated with the kobject created by kobject_create_and_add() in threshold_create_bank(), to prevent the kernel from crashing during CPU hotplug operations on systems with two or more multicore AMD CPUs. This patch fixes bug #11337. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NAndi Kleen <andi@firstfloor.org> Tested-by: NMark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 5月, 2008 1 次提交
-
-
由 Mike Travis 提交于
Change references from for_each_cpu_mask to for_each_cpu_mask_nr where appropriate Reviewed-by: NPaul Jackson <pj@sgi.com> Reviewed-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> commit 2d474871e2fb092eb46a0930aba5442e10eb96cc Author: Mike Travis <travis@sgi.com> Date: Mon May 12 21:21:13 2008 +0200
-
- 20 4月, 2008 1 次提交
-
-
由 Mike Travis 提交于
* Modify sched_affinity functions to pass cpumask_t variables by reference instead of by value. * Use new set_cpus_allowed_ptr function. Depends on: [sched-devel]: sched: add new set_cpus_allowed_ptr function Cc: Paul Jackson <pj@sgi.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 1月, 2008 4 次提交
-
-
由 Yinghai Lu 提交于
remove the recursion from this function. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sam Ravnborg 提交于
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback' threshold_cpu_callback() is only used by threshold_cpu_notifier. threshold_cpu_notifier is only used for cpu hot plug as it is registered using register_hotcpu_notifier(). Mark them both __cpuinit to fix the warning. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Robert Richter 提交于
Also macro definitions in apicdef.h has been updated. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Greg KH 提交于
the logic in this function is just crazy. It's recursive, but we can circumvent the creation for the kobject and whole creation of the threshold_block if some conditions are met. That's why we see the allocate_threshold_blocks so many times in the callstack, yet only a few kobjects created. Then we blow up in kobject_uevent_env() on the first debug printk. Which means that we are just passing in garbage. Man, this is one time that comments in code would have been very nice to have, and why forward goto's into major code blocks are just evil... Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 1月, 2008 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This problem is due to the kobject rework recently done in this file. The mce_amd_64.c code uses some wierd forward calls to back out of the recursive way the code creates kobjects. Because of this, we need to verify that we have really created a kobject before calling kobject_uevent(). Many thanks to Yinghai Lu <yhlu.kernel@gmail.com> for reporting the problem and testing. Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Jacob Shin <jacob.shin@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 1月, 2008 3 次提交
-
-
由 Greg Kroah-Hartman 提交于
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Jacob Shin <jacob.shin@amd.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Make this kobject dynamic and convert it to not use kobject_register, which is going away. Cc: Jacob Shin <jacob.shin@amd.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
The x86_64 arch/x86/kernel/Makefile uses references into arch/x86/kernel/cpu/... to use code from there. Unifiy it with the nicely structured i386 way and reuse the existing subdirectory make rules. Also move the machine check related source into ...kernel/cpu/mcheck, where the other machine check related code is. No code change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 10月, 2007 1 次提交
-
-
由 Mike Travis 提交于
cpu_data is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpus. When NR_CPU count is raised to 4096 the size of cpu_data becomes 3,145,728 bytes. These changes were adopted from the sparc64 (and ia64) code. An additional field was added to cpuinfo_x86 to be a non-ambiguous cpu index. This corresponds to the index into a cpumask_t as well as the per_cpu index. It's used in various places like show_cpuinfo(). cpu_data is defined to be the boot_cpu_data structure for the NON-SMP case. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 10月, 2007 1 次提交
-
-
由 Joe Korty 提交于
Add missing IRQs and IRQ descriptions to /proc/interrupts. /proc/interrupts is most useful when it displays every IRQ vector in use by the system, not just those somebody thought would be interesting. This patch inserts the following vector displays to the i386 and x86_64 platforms, as appropriate: rescheduling interrupts TLB flush interrupts function call interrupts thermal event interrupts threshold interrupts spurious interrupts A threshold interrupt occurs when ECC memory correction is occuring at too high a frequency. Thresholds are used by the ECC hardware as occasional ECC failures are part of normal operation, but long sequences of ECC failures usually indicate a memory chip that is about to fail. Thermal event interrupts occur when a temperature threshold has been exceeded for some CPU chip. IIRC, a thermal interrupt is also generated when the temperature drops back to a normal level. A spurious interrupt is an interrupt that was raised then lowered by the device before it could be fully processed by the APIC. Hence the apic sees the interrupt but does not know what device it came from. For this case the APIC hardware will assume a vector of 0xff. Rescheduling, call, and TLB flush interrupts are sent from one CPU to another per the needs of the OS. Typically, their statistics would be used to discover if an interrupt flood of the given type has been occuring. AK: merged v2 and v4 which had some more tweaks AK: replace Local interrupts with Local timer interrupts AK: Fixed description of interrupt types. [ tglx: arch/x86 adaptation ] [ mingo: small cleanup ] Signed-off-by: NJoe Korty <joe.korty@ccur.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Tim Hockin <thockin@hockin.org> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 10月, 2007 1 次提交
-
-
由 Mike Travis 提交于
This is from an earlier message from 'Christoph Lameter': cpu_core_map is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpu. If we put the cpu_core_map into the per cpu area then it will be allocated for each processor as it comes online. This means that the core map cannot be accessed until the per cpu area has been allocated. Xen does a weird thing here looping over all processors and zeroing the masks that are not yet allocated and that will be zeroed when they are allocated. I commented the code out. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2007 2 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 7月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-