we came across an error as below:

[build_nat_area_bitmap:1710] nid[0x    1718] addr[0x         1c18ddc] ino[0x    1718]
[build_nat_area_bitmap:1710] nid[0x    1719] addr[0x         1c193d5] ino[0x    1719]
[build_nat_area_bitmap:1710] nid[0x    171a] addr[0x         1c1736e] ino[0x    171a]
[build_nat_area_bitmap:1710] nid[0x    171b] addr[0x        58b3ee8f] ino[0x815f92ed]
[build_nat_area_bitmap:1710] nid[0x    171c] addr[0x         fcdc94b] ino[0x49366377]
[build_nat_area_bitmap:1710] nid[0x    171d] addr[0x        7cd2facf] ino[0xb3c55300]
[build_nat_area_bitmap:1710] nid[0x    171e] addr[0x        bd4e25d0] ino[0x77c34c09]

... ...

[build_nat_area_bitmap:1710] nid[0x    1718] addr[0x         1c18ddc] ino[0x    1718]
[build_nat_area_bitmap:1710] nid[0x    1719] addr[0x         1c193d5] ino[0x    1719]
[build_nat_area_bitmap:1710] nid[0x    171a] addr[0x         1c1736e] ino[0x    171a]
[build_nat_area_bitmap:1710] nid[0x    171b] addr[0x        58b3ee8f] ino[0x815f92ed]
[build_nat_area_bitmap:1710] nid[0x    171c] addr[0x         fcdc94b] ino[0x49366377]
[build_nat_area_bitmap:1710] nid[0x    171d] addr[0x        7cd2facf] ino[0xb3c55300]
[build_nat_area_bitmap:1710] nid[0x    171e] addr[0x        bd4e25d0] ino[0x77c34c09]

One nat block may be stepped by a data block, so this patch forbid to
write if the blkaddr is illegal
Signed-off-by: NYunlei He <heyunlei@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In 1TB storage, we need to admit 22841 prefree segments, which can consume
too much segments.
This patch sets 8GB in max. prefree segments in that case.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's keep more node/meta pages in run time.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This mount option is to enable original log-structured filesystem forcefully.
So, there should be no random writes for main area.

Especially, this supports host-managed SMR device.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

For data pages, let's try to flush as much as possible in background.

On /dev/pmem0,

1. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048 conv=fsync
 Before : 800 MB/s
 After  : 1.1 GB/s

2. dd if=/dev/zero of=/mnt/test/testfile bs=1M count=2048
 Before : 1.3 GB/s
 After  : 2.2 GB/s
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch registers all the inodes which have dirty metadata to sync when
checkpoint is doing.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch refactors to use inode pointer for set_inode_flag and
clear_inode_flag.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Restructure struct seg_entry to eliminate holes in it, after that,
in 32-bits machine, it reduces size from 32 bytes to 24 bytes; in
64-bits machine, it reduces size from 56 bytes to 40 bytes.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In curseg cache, f2fs caches two different parts:
 - datas of current summay block, i.e. summary entries, footer info.
 - journal info, i.e. sparse nat/sit entries or io stat info.

With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.

So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem

When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

f2fs support atomic write with following semantics:
1. open db file
2. ioctl start atomic write
3. (write db file) * n
4. ioctl commit atomic write
5. close db file

With this flow we can avoid file becoming corrupted when abnormal power
cut, because we hold data of transaction in referenced pages linked in
inmem_pages list of inode, but without setting them dirty, so these data
won't be persisted unless we commit them in step 4.

But we should still hold journal db file in memory by using volatile
write, because our semantics of 'atomic write support' is incomplete, in
step 4, we could fail to submit all dirty data of transaction, once
partial dirty data was committed in storage, then after a checkpoint &
abnormal power-cut, db file will be corrupted forever.

So this patch tries to improve atomic write flow by adding a revoking flow,
once inner error occurs in committing, this gives another chance to try to
revoke these partial submitted data of current transaction, it makes
committing operation more like aotmical one.

If we're not lucky, once revoking operation was failed, EAGAIN will be
reported to user for suggesting doing the recovery with held journal file,
or retrying current transaction again.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch fixes confilct on page->private value between f2fs_trace_pid and
atomic page.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The periodic checkpoint can resolve the previous issue.
So, now we can use this again to improve the reported performance regression:

https://lkml.org/lkml/2015/10/8/20

This reverts commit 15bec0ff5a9ba6d203178fa8772259df6207942a.

This patch introduce background_gc=sync enabling synchronous cleaning in
background.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, we skip dentry block writes when wbc is SYNC_NONE with no memory
pressure and the number of dirty pages is pretty small.

But, we didn't skip for normal data writes, which gives us not much big impact
on overall performance.
Moreover, by skipping some data writes, kworker falls into infinite loop to try
to write blocks, when many dir inodes have only one dentry block.

So, this patch removes skipping data writes.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If F2FS_CHECK_FS is turned off, we can get a build warning for unused variable.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, we use radix tree to index all registered page entries for
atomic file, but now we only use radix tree to see whether current page
is indexed or not, since the other user of radix tree is gone in commit
042b7816 ("f2fs: remove unnecessary call to invalidate inmemory pages").

So in this patch, we try to use one more efficient way:
Introducing a macro ATOMIC_WRITTEN_PAGE, and setting it as page private
value to indicate page indexing status. By using this way, we can save
memory and lookup time.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Replace BUG_ON with f2fs_bug_on to deal with
block and segment validity check failed.
Signed-off-by: NXue Liu <liuxueliu.liu@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.

* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
  write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
  balanced_dirty_ratelimit, completions and dirty_exceeded.

* writeback_chunk_size() and over_bground_thresh() now take @wb
  instead of @bdi.

* bdi_writeout_fraction(bdi, ...)	-> wb_writeout_fraction(wb, ...)
  bdi_dirty_limit(bdi, ...)		-> wb_dirty_limit(wb, ...)
  bdi_position_ration(bdi, ...)		-> wb_position_ratio(wb, ...)
  bdi_update_writebandwidth(bdi, ...)	-> wb_update_write_bandwidth(wb, ...)
  [__]bdi_update_bandwidth(bdi, ...)	-> [__]wb_update_bandwidth(wb, ...)
  bdi_{max|min}_pause(bdi, ...)		-> wb_{max|min}_pause(wb, ...)
  bdi_dirty_limits(bdi, ...)		-> wb_dirty_limits(wb, ...)

* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
  respectively.  Note that explicit zeroing is dropped in the process
  as wb's are cleared in entirety anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.

v2: Typo in description fixed as suggested by Jan.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch adds a bitmap for discard issues from f2fs_trim_fs.
There-in rule is to issue discard commands only for invalidated blocks
after mount.
Once mount is done, f2fs_trim_fs trims out whole invalid area.
After ehn, it will not issue and discrads redundantly.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In __set_free we will check whether all segment are free in one section
when free one segment, in order to set section to free status. But the
searching region of segmap is from start segno to last segno of main
area, it's not necessary. So let's just only check all segment bitmap
of target section.
Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

rwlock can provide better concurrency when there are much more readers than
writers because readers can hold the rwlock simultaneously.

But now, for segmap_lock rwlock in struct free_segmap_info, there is only one
reader 'mount' from below call path:
->f2fs_fill_super
  ->build_segment_manager
    ->build_dirty_segmap
      ->init_dirty_segmap
        ->find_next_inuse
          read_lock
          ...
          read_unlock

Now that our concurrency can not be improved since there is no other reader for
this lock, we do not need to use rwlock_t type for segmap_lock, let's replace it
with spinlock_t type.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Instead of using variable length array, this patch let preallocate memory for
them.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Currently, there are several variables with Boolean type as below:

struct f2fs_sb_info {
...
	int s_dirty;
	bool need_fsck;
	bool s_closing;
...
	bool por_doing;
...
}

For this there are some issues:
1. there are some space of f2fs_sb_info is wasted due to aligning after Boolean
   type variables by compiler.
2. if we continuously add new flag into f2fs_sb_info, structure will be messed
   up.

So in this patch, we try to:
1. switch s_dirty to Boolean type variable since it has two status 0/1.
2. merge s_dirty/need_fsck/s_closing/por_doing variables into s_flag.
3. introduce an enum type which can indicate different states of sbi.
4. use new introduced universal interfaces is_sbi_flag_set/{set,clear}_sbi_flag
   to operate flags for sbi.

After that, above issues will be fixed.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Under memory pressure, let's avoid skipping data writes.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Introduce f2fs_change_bit to simplify the change bit logic in
function set_to_next_nat{sit}.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
 o F2FS_IOC_START_ATOMIC_WRITE
 o F2FS_IOC_COMMIT_ATOMIC_WRITE

The database engine should be aware of the following sequence.
1. open
 -> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
  : all the written data will be treated as atomic pages.
3. commit
 -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
  : this flushes all the data blocks to the disk, which will be shown all or
  nothing by f2fs recovery procedure.
4. repeat to #2.

The IO pattens should be:

  ,- START_ATOMIC_WRITE                  ,- COMMIT_ATOMIC_WRITE
 CP | D D D D D D | FSYNC | D D D D | FSYNC ...
                      `- COMMIT_ATOMIC_WRITE
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

My static checker complains that segment is a u64 but only the lower 31
bits can be used before we hit a shift wrapping bug.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch cleans up the existing and new macros for readability.

Rule is like this.

         ,-----------------------------------------> MAX_BLKADDR -,
         |  ,------------- TOTAL_BLKS ----------------------------,
         |  |                                                     |
         |  ,- seg0_blkaddr   ,----- sit/nat/ssa/main blkaddress  |
block    |  | (SEG0_BLKADDR)  | | | |   (e.g., MAIN_BLKADDR)      |
address  0..x................ a b c d .............................
            |                                                     |
global seg# 0...................... m .............................
            |                       |                             |
            |                       `------- MAIN_SEGS -----------'
            `-------------- TOTAL_SEGS ---------------------------'
                                    |                             |
 seg#                               0..........xx..................

= Note =
 o GET_SEGNO_FROM_SEG0 : blk address -> global segno
 o GET_SEGNO           : blk address -> segno
 o START_BLOCK         : segno -> starting block address
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, f2fs activates SSR if the # of free segments reaches to the # of
overprovisioned segments.
In this case, SSR starts to use dirty segments only, so that the overprovisoned
space cannot be selected for new data.
This means that we have no chance to utilizae the overprovisioned space at all.

This patch fixes that by allowing LFS allocations until the # of free segments
reaches to the last threshold, reserved space.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch changes the ipu_policy setting to use any combination of orthogonal policies.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes
sector device at maximum. But now f2fs only support 512 bytes size sector, so
block device such as zRAM which uses page cache as its block storage space will
not be mounted successfully as mismatch between sector size of zRAM and sector
size of f2fs supported.

In this patch we support large sector size in f2fs, so block device with sector
size of 512/1024/2048/4096 bytes can be supported in f2fs.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch cleans up a simple macro.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously, all the dnode pages should be read during the roll-forward recovery.
Even worsely, whole the chain was traversed twice.
This patch removes that redundant and costly read operations by using page cache
of meta_inode and readahead function as well.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.

This may be used by storage showing very high random write performance.

For example, it can be used when,

Seq. writes (Data) + wait + Seq. writes (Node)

is pretty much slower than,

Rand. writes (Data)
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In commit aec71382 ("f2fs: refactor flush_nat_entries codes for reducing NAT
writes"), we descripte the issue as below:

"Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
   nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
   journal is full, then flush the left dirty entries to disk without merge
   journaled entries, so these journaled entries may be flushed to disk at next
   checkpoint but lost chance to flushed last time."

Actually, we have the same problem in using SIT journal area.

In this patch, firstly we will update sit journal with dirty entries as many as
possible. Secondly if there is no space in sit journal, we will remove all
entries in journal and walk through the whole dirty entry bitmap of sit,
accounting dirty sit entries located in same SIT block to sit entry set. All
entry sets are linked to list sit_entry_set in sm_info, sorted ascending order
by count of entries in set. Later we flush entries in set which have fewest
entries into journal as many as we can, and then flush dense set with merged
entries to disk.

In this way we can use sit journal area more effectively, also we will reduce
SIT update, result in gaining in performance and saving lifetime of flash
device.

In my testing environment, it shows this patch can help to reduce SIT block
update obviously.

virtual machine + hard disk:
fsstress -p 20 -n 400 -l 5
		sit page num	cp count	sit pages/cp
based		2006.50		1349.75		1.486
patched		1566.25		1463.25		1.070

Our latency of merging op is small when handling a great number of dirty SIT
entries in flush_sit_entries:
latency(ns)	dirty sit count
36038		2151
49168		2123
37174		2232
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

sit_i in macro SIT_BLOCK_OFFSET/START_SEGNO is not used, remove it.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch replaces BUG cases with f2fs_bug_on to remain fsck.f2fs information.
And it implements some void functions to initiate fsck.f2fs too.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds three inline functions to clean up dirty casting codes.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Fix typo and some grammatical errors.

The words "filesystem" and "readahead" are being used without the space treewide.
Signed-off-by: NPark Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>