Pull sound fixes from Takashi Iwai:
 "Just two HD-audio fixups for a recent Realtek codec model. It's pretty
  safe to apply (and unsurprisingly boring)"

* tag 'sound-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - fix headset mic problem for Dell machines with alc236
  ALSA: hda/realtek - Add support for ALC236/ALC3204

Pull NFS client bugfixes from Trond Myklebust:

 - Fix a list corruption in xprt_release()

 - Fix a workqueue lockdep warning due to unsafe use of
   cancel_work_sync()

* tag 'nfs-for-4.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Destroy transport from the system workqueue
  SUNRPC: fix a list corruption issue in xprt_release()

Pull KVM fixes from Radim Krčmář:
 "PPC fixes for potential host oops and hangs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Add more barriers in XIVE load/unload code
  KVM: PPC: Book3S: Protect kvmppc_gpa_to_ua() with SRCU
  KVM: PPC: Book3S HV: POWER9 more doorbell fixes
  KVM: PPC: Fix oops when checking KVM_CAP_PPC_HTM

We have several Dell laptops which use the codec alc236, the headset
mic can't work on these machines. Following the commit 736f20a7, we
add the pin cfg table to make the headset mic work.

Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull x86 platform driver fixes from Darren Hart:
 "Use a spin_lock instead of mutex in atomic context. The devm_ fix is a
  dependency. Summary:

  intel_pmc_ipc:
   - Use spin_lock to protect GCR updates
   - Use devm_* calls in driver probe function"

* tag 'platform-drivers-x86-v4.14-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates
  platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe function

Currently, update_no_reboot_bit() function implemented in this driver
uses mutex_lock() to protect its register updates. But this function is
called with in atomic context in iTCO_wdt_start() and iTCO_wdt_stop()
functions in iTCO_wdt.c driver, which in turn causes "sleeping into
atomic context" issue. This patch fixes this issue by replacing the
mutex_lock() with spin_lock() to protect the GCR read/write/update APIs.

Fixes: 9d855d46 ("platform/x86: intel_pmc_ipc: Fix iTCO_wdt GCS memory mapping failure")
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kupuswamy@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

This patch cleans up unnecessary free/alloc calls in ipc_plat_probe(),
ipc_pci_probe() and ipc_plat_get_res() functions by using devm_*
calls.

This patch also adds proper error handling for failure cases in
ipc_pci_probe() function.
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[andy: fixed style issues, missed devm_free_irq(), removed unnecessary log message]
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull workqueue fix from Tejun Heo:
 "This is a fix for an old bug in workqueue. Workqueue used a mutex to
  arbitrate who gets to be the manager of a pool. When the manager role
  gets released, the mutex gets unlocked while holding the pool's
  irqsafe spinlock. This can lead to deadlocks as mutex's internal
  spinlock isn't irqsafe. This got discovered by recent fixes to mutex
  lockdep annotations.

  The fix is a bit invasive for rc6 but if anything were wrong with the
  fix it would likely have already blown up in -next, and we want the
  fix in -stable anyway"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: replace pool->manager_arb mutex with a flag

Pull pin control fixes from Linus Walleij:
 "Two last minute fixes for pin controllers, both regressions in
  specific drivers:

   - Fix a touchpad pin control issue on the AMD affecting Asus laptops

   - Fix an interrupt handling regression on the MCP23s08"

* tag 'pinctrl-v4.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mcp23s08: fix interrupt handling regression
  pinctrl/amd: fix masking of GPIO interrupts

Merge tag 'regulator-fix-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small driver specific bug fixes that have been collected
  since the merge window"

* tag 'regulator-fix-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rn5t618: Do not index regulator_desc arrays by id
  regulator: axp20x: Fix poly-phase bit offset for AXP803 DCDC5/6

Pull staging and IIO fixes from Greg KH:
 "Here are a small number of patches to resolve some reported IIO and a
  staging driver problem. Nothing major here, full details are in the
  shortlog below.

  All have been in linux-next with no reported issues"

* tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: bcm2835-audio: Fix memory corruption
  iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property
  iio: adc: dln2-adc: fix build error
  iio: dummy: events: Add missing break
  staging: iio: ade7759: fix signed extension bug on shift of a u8
  iio: pressure: zpa2326: Remove always-true check which confuses gcc
  iio: proximity: as3935: noise detection + threshold changes

Pull char/misc driver fixes from Greg KH:
 "Here are four small fixes for 4.14-rc6.

  Three of them are binder driver fixes for reported issues, and the
  last one is a hyperv driver bugfix. Nothing major, but good fixes to
  get into 4.14-final.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  android: binder: Fix null ptr dereference in debug msg
  android: binder: Don't get mm from task
  vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister()
  binder: call poll_wait() unconditionally.

Pull USB/PHY fixes from Greg KH:
 "Here are a small number of USB and PHY driver fixes for 4.14-rc6

  There is the usual musb and xhci fixes in here, as well as some needed
  phy patches. Also is a nasty regression fix for usbfs that has started
  to hit a lot of people using virtual machines.

  All of these have been in linux-next with no reported problems"

* tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: hub: Allow reset retry for USB2 devices on connect bounce
  USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()
  MAINTAINERS: fix git tree url for musb module
  usb: quirks: add quirk for WORLDE MINI MIDI keyboard
  usb: musb: sunxi: Explicitly release USB PHY on exit
  usb: musb: Check for host-mode using is_host_active() on reset interrupt
  usb: musb: musb_cppi41: Configure the number of channels for DA8xx
  usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx
  usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
  USB: musb: fix late external abort on suspend
  USB: musb: fix session-bit runtime-PM quirk
  usb: cdc_acm: Add quirk for Elatec TWN3
  USB: devio: Revert "USB: devio: Don't corrupt user memory"
  usb: xhci: Handle error condition in xhci_stop_device()
  usb: xhci: Reset halted endpoint if trb is noop
  xhci: Cleanup current_cmd in xhci_cleanup_command_queue()
  xhci: Identify USB 3.1 capable hosts by their port protocol capability
  USB: serial: metro-usb: add MS7820 device id
  phy: rockchip-typec: Check for errors from tcphy_phy_init()
  phy: rockchip-typec: Don't set the aux voltage swing to 400 mV
  ...

Merge remote-tracking branches 'regulator/fix/axp20x' and 'regulator/fix/rn5t618' into regulator-linus

Pull input fix from Dmitry Torokhov:
 "A fix for a broken commit in the previous pull breaking automatic
  module loading of input handlers, such ad evdev"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: do not use property bits when generating module alias

The commit 8724ecb0 ("Input: allow matching device IDs on property
bits") started using property bits when generating module aliases for input
handlers, but did not adjust the generation of MODALIAS attribute on input
device uevents, breaking automatic module loading. Given that no handler
currently uses property bits in their module tables, let's revert this part
of the commit for now.
Reported-by: NDamien Wyart <damien.wyart@gmail.com>
Tested-by: NDamien Wyart <damien.wyart@gmail.com>
Fixes: 8724ecb0 ("Input: allow matching device IDs on property bits")
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull x86 fixes from Thomas Gleixner:
 "A couple of fixes addressing the following issues:

   - The last polishing for the TLB code, removing the last BUG_ON() and
     the debug file along with tidying up the lazy TLB code.

   - Prevent triple fault on 1st Gen. 486 caused by stupidly calling the
     early IDT setup after the first function which causes a fault which
     should be caught by the exception table.

   - Limit the mmap of /dev/mem to valid addresses

   - Prevent late microcode loading on Broadwell X

   - Remove a redundant assignment in the cache info code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm
  x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode"
  x86/mm/64: Remove the last VM_BUG_ON() from the TLB code
  x86/microcode/intel: Disable late loading on model 79
  x86/idt: Initialize early IDT before cr4_init_shadow()
  x86/cpu/intel_cacheinfo: Remove redundant assignment to 'this_leaf'

Pull timer fix from Thomas Gleixner:
 "A single fix to make the cs5535 clock event driver robust agaist
  spurious interrupts"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents/drivers/cs5535: Improve resilience to spurious interrupts

Pull smp/hotplug fix from Thomas Gleixner:
 "The recent rework of the callback invocation missed to cleanup the
  leftovers of the operation, so under certain circumstances a
  subsequent CPU hotplug operation accesses stale data and crashes.
  Clean it up."

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Reset node state after operation

Pull perf fixes from Thomas Gleixner:
 "A series of fixes for perf tooling:

   - Make xyarray return the X/Y size correctly which fixes a crash in
     the exit code.

   - Fix the libc path in test so it works not only on Debian/Ubuntu
     correctly

   - Check for eBPF file existance and output a useful error message
     instead of failing to compile a non existant file

   - Make sure perf_hpp_fmt is not longer references before freeing it

   - Use list_del_init() in the histogram code to prevent a crash when
     the already deleted element is deleted again

   - Remove the leftovers of the removed '-l' option

   - Add reviewer entries to the MAINTAINERS file"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu
  perf xyarray: Fix wrong processing when closing evsel fd
  perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE
  perf record: Fix documentation for a inexistent option '-l'
  perf tools: Add long time reviewers to MAINTAINERS
  perf tools: Check wether the eBPF file exists in event parsing
  perf hists: Add extra integrity checks to fmt_free()
  perf hists: Fix crash in perf_hpp__reset_output_field()

Pull irq fixes from Thomas Gleixner:
 "A set of small fixes mostly in the irq drivers area:

   - Make the tango irq chip work correctly, which requires a new
     function in the generiq irq chip implementation

   - A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON()
     and parsing the VCPU table size correctly"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack()
  irqchip/tango: Use irq_gc_mask_disable_and_ack_set
  genirq: generic chip: Add irq_gc_mask_disable_and_ack_set()
  irqchip/gic-v3-its: Add missing changes to support 52bit physical address
  irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size
  irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain()
  DT: arm,gic-v3: Update the ITS size in the examples

Pull objtool fix from Thomas Gleixner:
 "Plug a memory leak in the instruction decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix memory leak in decode_instructions()

Pull networking fixes from David Miller:
 "A little more than usual this time around. Been travelling, so that is
  part of it.

  Anyways, here are the highlights:

   1) Deal with memcontrol races wrt. listener dismantle, from Eric
      Dumazet.

   2) Handle page allocation failures properly in nfp driver, from Jaku
      Kicinski.

   3) Fix memory leaks in macsec, from Sabrina Dubroca.

   4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.

   5) Several fixes in bnxt_en driver, including preventing potential
      NVRAM parameter corruption from Michael Chan.

   6) Fix for KRACK attacks in wireless, from Johannes Berg.

   7) rtnetlink event generation fixes from Xin Long.

   8) Deadlock in mlxsw driver, from Ido Schimmel.

   9) Disallow arithmetic operations on context pointers in bpf, from
      Jakub Kicinski.

  10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
      Xin Long.

  11) Only TCP is supported for sockmap, make that explicit with a
      check, from John Fastabend.

  12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.

  13) Fix panic in packet_getsockopt(), also from Eric Dumazet.

  14) Add missing locked in hv_sock layer, from Dexuan Cui.

  15) Various aquantia bug fixes, including several statistics handling
      cures. From Igor Russkikh et al.

  16) Fix arithmetic overflow in devmap code, from John Fastabend.

  17) Fix busted socket memory accounting when we get a fault in the tcp
      zero copy paths. From Willem de Bruijn.

  18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
  ipv6: flowlabel: do not leave opt->tot_len with garbage
  of_mdio: Fix broken PHY IRQ in case of probe deferral
  textsearch: fix typos in library helpers
  rxrpc: Don't release call mutex on error pointer
  net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
  net: stmmac: Fix stmmac_get_rx_hwtstamp()
  net: stmmac: Add missing call to dev_kfree_skb()
  mlxsw: spectrum_router: Configure TIGCR on init
  mlxsw: reg: Add Tunneling IPinIP General Configuration Register
  net: ethtool: remove error check for legacy setting transceiver type
  soreuseport: fix initialization race
  net: bridge: fix returning of vlan range op errors
  sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
  bpf: add test cases to bpf selftests to cover all access tests
  bpf: fix pattern matches for direct packet access
  bpf: fix off by one for range markings with L{T, E} patterns
  bpf: devmap fix arithmetic overflow in bitmap_size calculation
  net: aquantia: Bad udp rate on default interrupt coalescing
  net: aquantia: Enable coalescing management via ethtool interface
  ...

This is the possible reason for different hard to reproduce
problems on my ARMv7-SMP test system.

The symptoms are in recent kernels imprecise external aborts,
and in older kernels various kinds of network stalls and
unexpected page allocation failures.

My testing indicates that the trouble started between v4.5 and v4.6
and prevails up to v4.14.

Using the dirty_tx before acquiring the spin lock is clearly
wrong and was first introduced with v4.6.

Fixes: e3ad57c9 ("stmmac: review RX/TX ring management")
Signed-off-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When syzkaller team brought us a C repro for the crash [1] that
had been reported many times in the past, I finally could find
the root cause.

If FlowLabel info is merged by fl6_merge_options(), we leave
part of the opt_space storage provided by udp/raw/l2tp with random value
in opt_space.tot_len, unless a control message was provided at sendmsg()
time.

Then ip6_setup_cork() would use this random value to perform a kzalloc()
call. Undefined behavior and crashes.

Fix is to properly set tot_len in fl6_merge_options()

At the same time, we can also avoid consuming memory and cpu cycles
to clear it, if every option is copied via a kmemdup(). This is the
change in ip6_setup_cork().

[1]
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cb64a100 task.stack: ffff8801cc350000
RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168
RSP: 0018:ffff8801cc357550 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010
RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014
RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10
R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0
R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0
FS:  00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0
DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729
 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340
 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762
 sock_sendmsg_nosec net/socket.c:633 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:643
 SYSC_sendto+0x358/0x5a0 net/socket.c:1750
 SyS_sendto+0x40/0x50 net/socket.c:1718
 entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4520a9
RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9
RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016
RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee
R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029
Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an Ethernet PHY is initialized before the interrupt controller it is
connected to, a message like the following is printed:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

However, the actual error is ignored, leading to a non-functional (POLL)
PHY interrupt later:

    Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL)

Depending on whether the PHY driver will fall back to polling, Ethernet
may or may not work.

To fix this:
  1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to
     of_irq_get().
     Unlike the former, the latter returns -EPROBE_DEFER if the
     interrupt controller is not yet available, so this condition can be
     detected.
     Other errors are handled the same as before, i.e. use the passed
     mdio->irq[addr] as interrupt.
  2. Propagate and handle errors from of_mdiobus_register_phy() and
     of_mdiobus_register_device().
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix spellos (typos) in textsearch library helpers.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't release call mutex at the end of rxrpc_kernel_begin_call() if the
call pointer actually holds an error value.

Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Fix HW timestamping

Three fixes for HW timestamping feature, all of them for RX side.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent infinite loop by correctly setting the loop condition to
break when i == 10.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using GMAC4 the valid timestamp is from CTX next desc but
we are passing the previous desc to get_rx_timestamp_status()
callback.

Fix this and while at it rework a little bit the function logic.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When RX HW timestamp is enabled and a frame is discarded we are
not freeing the skb but instead only setting to NULL the entry.

Add a call to dev_kfree_skb_any() so that skb entry is correctly
freed.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull input fixes from Dmitry Torokhov:

 - joydev now implements a blacklist to avoid creating joystick nodes
   for accelerometers found in composite devices such as PlaStation
   controllers

 - assorted driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ims-psu - check if CDC union descriptor is sane
  Input: joydev - blacklist ds3/ds4/udraw motion sensors
  Input: allow matching device IDs on property bits
  Input: factor out and export input_device_id matching code
  Input: goodix - poll the 'buffer status' bit before reading data
  Input: axp20x-pek - fix module not auto-loading for axp221 pek
  Input: tca8418 - enable interrupt after it has been requested
  Input: stmfts - fix setting ABS_MT_POSITION_* maximum size
  Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen
  Input: synaptics - disable kernel tracking on SMBus devices

Pull vfs fixes from Al Viro:
 "MS_I_VERSION fixes - Mimi's fix + missing bits picked from Matthew
  (his patch contained a duplicate of the fs/namespace.c fix as well,
  but by that point the original fix had already been applied)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Convert fs/*/* to SB_I_VERSION
  vfs: fix mounting a filesystem with i_version

Jiri Pirko says:

====================
mlxsw: spectrum: Configure TTL of "inherit" for offloaded tunnels

Petr says:

Currently mlxsw only offloads tunnels that are configured with TTL of "inherit"
(which is the default). However, Spectrum defaults to 255 and the driver
neglects to change the configuration. Thus the tunnel packets from offloaded
tunnels always have TTL of 255, even though tunnels with explicit TTL of 255 are
never actually offloaded.

To fix this, introduce support for TIGCR, the register that keeps the related
bits of global tunnel configuration, and use it on first offload to properly
configure inheritance of TTL of tunnel packets from overlay packets.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spectrum tunnels do not default to ttl of "inherit" like the Linux ones
do. Configure TIGCR on router init so that the TTL of tunnel packets is
copied from the overlay packets.

Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TIGCR register is used for setting up the IPinIP Tunnel
configuration.

Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 9cab88726929605 ("net: ethtool: Add back transceiver type")
restores the transceiver type to struct ethtool_link_settings and
convert_link_ksettings_to_legacy_settings() but forgets to remove the
error check for the same in convert_legacy_settings_to_link_ksettings().
This prevents older versions of ethtool to change link settings.

    # ethtool --version
    ethtool version 3.16

    # ethtool -s eth0 autoneg on speed 100 duplex full
    Cannot set new settings: Invalid argument
      not setting speed
      not setting duplex
      not setting autoneg

While newer versions of ethtool works.

    # ethtool --version
    ethtool version 4.10

    # ethtool -s eth0 autoneg on speed 100 duplex full
    [   57.703268] sh-eth ee700000.ethernet eth0: Link is Down
    [   59.618227] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx

Fixes: 19cab887 ("net: ethtool: Add back transceiver type")
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reported-by: NRenjith R V <renjith.rv@quest-global.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzkaller stumbled upon a way to trigger
WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41
reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39

There are two initialization paths for the sock_reuseport structure in a
socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through
SO_ATTACH_REUSEPORT_[CE]BPF before bind.  The existing implementation
assumedthat the socket lock protected both of these paths when it actually
only protects the SO_ATTACH_REUSEPORT path.  Syzkaller triggered this
double allocation by running these paths concurrently.

This patch moves the check for double allocation into the reuseport_alloc
function which is protected by a global spin lock.

Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection")
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>