The IR chip has no address decoding, so the IR data is always present in 
the high byte when doing a read from the saa7146 chip. This means that 
the DEBI address used is irrelevant to the IR decoding logic.
DEBI addresses 0x1XXX are mapped to the registers on the CI module 
itself, but only the lowest two bits are actually used (see EN50221, 
section A.2.2.1), meaning that 0x1234 is equivalent to 0x1000 which maps 
to register 0 (the data register). A read from the data register is 
supposed to be preceded by a read from the size register, so some CI 
modules will be confused (the AlphaCrypt CAM will hang completely).
The attached patch changes the address used when reading the IR data to 
use 0x4000 instead. This is the CI version address, which is a safer 
default, works with the AlphaCrypt CAM and matches the behaviour of the 
Windows driver (AFAIK).
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Let the MT2060 be customized like most of the other DVB PLLs/front-ends. 
Also, add a missing dependency on I2C.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pci_ids.h: Add NVIDIA PCI ID

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] report rename failure when target file is locked by Windows
  [CIFS] Allow null user connections
  [CIFS] Fix readdir breakage when blocksize set too small

Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NPeer Chen <pchen@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NPeer Chen <pchen@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/addr: Use client registration to fix module unload race
  IB/mthca: Fix MAD extended header format for MAD_IFC firmware command
  IB/uverbs: Return sq_draining value in query_qp response
  IB/amso1100: Fix incorrect pr_debug()
  IB/amso1100: Use dma_alloc_coherent() instead of kmalloc/dma_map_single
  IB/ehca: Fix eHCA driver compilation for uniprocessor
  RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count
  IB/iser: Start connection after enabling iSER

Require registration with ib_addr module to prevent caller from
unloading while a callback is in progress.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Do not use -msym32 option for modules.
  [MIPS] Don't use R10000 llsc workaround version for all llsc-full processors.
  [MIPS] Ocelot G: Fix : "CURRENTLY_UNUSED" is not defined warning.
  [MIPS] Fix warning about init_initrd() call if !CONFIG_BLK_DEV_INITRD.
  [MIPS] IP27: Allow SMP ;-)  Another changeset messed up by patch.
  [MIPS] Fix merge screwup by patch(1)
  Revert "[MIPS] Make SPARSEMEM selectable on QEMU."

On 64-bit kernel, modules are loaded into XKSEG for now.  While XKSEG
address is not a sign-extended 32-bit address, we can not use -msym32
option.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Found and original patch by bile@landofbile.com.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

  CC      arch/mips/momentum/ocelot_g/gt-irq.o
arch/mips/momentum/ocelot_g/gt-irq.c:30:5: warning: "CURRENTLY_UNUSED" is not defined
arch/mips/momentum/ocelot_g/gt-irq.c:199:5: warning: "CURRENTLY_UNUSED" is not defined
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When lmo commit 4ef893e0515e8bf336dfbd200884f244869fbb43 was merged to
kernel.org as e73ea273 patch happily
applied the IP27 segment to IP22.  f63f36c18b11e166d0f362ac04dbcd7e6ea23f9e
did fix the effects partially - and with a wrong log message.  Now fixed
for real (tm).
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Patch happily applied an Ocelot G patch to Ocelot C when merging
linux-mips.org changeset 91ee9a801e65d2981dfe327d2519c7fc6ab02e6b into
kernel.org as 6ceb6d3a.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This reverts commit 31473747.

Another amazing example of patch(1) messing up - lmo changeset
66e8560d11d02bcadc261498471831a6375ad046 was merged twice to kernel.org
and ended up doing this rubbish job.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: Add splice support

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: silence a warning in ebtables
  [IPV6]: File the fingerprints off ah6->spi/esp6->spi
  [TCP]: Set default congestion control when no sysctl.
  [TIPC] net/tipc/port.c: fix NULL dereference

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix futex_atomic_cmpxchg_inatomic implementation.

Fixes Samba bugzilla bug # 4182

Rename by handle failures (retry after rename by path) were not
being returned back.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  Revert "[PATCH] Add 0x7110 piix to ata_piix.c"
  [libata] sata_nv: Add PCI IDs
  [PATCH] ahci: fix status register check in ahci_softreset

This reverts commit f833229c:

According to reviewers and the lspci data provided in commit message
itself, PCI ID 0x7110 should not have been added to ata_piix.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

net/bridge/netfilter/ebtables.c: In function 'ebt_dev_check':
net/bridge/netfilter/ebtables.c:89: warning: initialization discards qualifiers from pointer target type

So make the char* a const char * and the warning is gone.
Signed-off-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I copied the logic from ll/sc arch implementations, but that
was wrong and makes no sense at all.  Just do a straight
compare-exchange instruction, just like x86.

Based upon bug reports from Dennis Gilmore and Fabio Massimo.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In theory these are opaque 32bit values.  However, we end up
allocating them sequentially in host-endian and stick unchanged
on the wire.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The setting of the default congestion control was buried in
the sysctl code so it would not be done properly if SYSCTL was
not enabled.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The correct order is: NULL check before dereference

Spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It turns out that the linker warnings on 64-bit powerpc about "section
blah exceeds stub group size" were being triggered by conditional
branches in head_64.S branching to global symbols, whether in
head_64.S or in other files.  This eliminates the warnings by making
some global symbols in head_64.S no longer global, and by rearranging
some branches.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
[ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix warning in mips-boards generic PCI
  [MIPS] SMTC: Synchronize cp0 counters on bootup.
  [MIPS] SMTC: Fix crash if # of TC's > # of VPE's after pt_regs irq cleanup.
  [MIPS] 16K & 64K page size fixes

Since the "mask" bit is in the low word, when we write a new entry, we
need to write the high word first, before we potentially unmask it.

The exception is when we actually want to mask the interrupt, in which
case we want to write the low word first to make sure that the high word
doesn't change while the interrupt routing is still active.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/mips/mips-boards/generic/pci.c: In function `mips_pcibios_init':
arch/mips/mips-boards/generic/pci.c:227: warning: comparison of distinct pointer types lacks a cast
arch/mips/mips-boards/generic/pci.c:228: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Derived from Peter Watkins <treestem@gmail.com>'s work.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is preparation for fixing the ordering of the accesses that
got broken by the commit cf4c6a2f when
factoring out the "common" io apic routing entry accesses.

Move the accessor function (that were only used by io_apic.c) out
of a header file, and use proper memory-mapped accesses rather than
making up our own "volatile" pointers.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Make alignment exception always check exception table
  [POWERPC] Disallow kprobes on emulate_step and branch_taken
  [POWERPC] Make mmiowb's io_sync preempt safe
  [POWERPC] Make high hugepage areas preempt safe
  [POWERPC] Make current preempt-safe
  [POWERPC] qe_lib: qe_issue_cmd writes wrong value to CECDR
  [POWERPC] Use 4kB iommu pages even on 64kB-page systems
  [POWERPC] Fix oprofile support for e500 in arch/powerpc
  [POWERPC] Fix rmb() for e500-based machines it
  [POWERPC] Fix various offb issues

Signed-off-by: NJeff Garzik <jeff@garzik.org>

ahci_softreset() used to use ahci_tf_read() which reads D2H_REG area
to check for the Status register.  However, this area is zeroed on
initialization and not set by initial signature FIS.  Replace it with
ahci_check_status().

This bug prevented CLO code from being activated whenever BSY and/or
DRQ is set prior to softreset.  This fix makes
AHCI_FLAG_RESET_NEEDS_CLO flag redundant.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ata_piix: allow 01b MAP for both ICH6M and ICH7M
  [PATCH] libata: unexport ata_dev_revalidate()
  [PATCH] Add 0x7110 piix to ata_piix.c
  [PATCH] sata_sis: fix flags handling for the secondary port