- 18 7月, 2013 1 次提交
-
-
由 Jan Beulich 提交于
Due to commit 3683243b ("xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX") xennet_fill_frags() may end up filling MAX_SKB_FRAGS + 1 fragments in a receive skb, and only reduce the fragment count subsequently via __pskb_pull_tail(). That's a result of xennet_get_responses() allowing a maximum of one more slot to be consumed (and intermediately transformed into a fragment) if the head slot has a size less than or equal to RX_COPY_THRESHOLD. Hence we need to adjust xennet_fill_frags() to pull earlier if we reached the maximum fragment count - due to the described behavior of xennet_get_responses() this guarantees that at least the first fragment will get completely consumed, and hence the fragment count reduced. In order to not needlessly call __pskb_pull_tail() twice, make the original call conditional upon the pull target not having been reached yet, and defer the newly added one as much as possible (an alternative would have been to always call the function right before the call to xennet_fill_frags(), but that would imply more frequent cases of needing to call it twice). Signed-off-by: NJan Beulich <jbeulich@suse.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: stable@vger.kernel.org (3.6 onwards) Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Instead of mixing printk and pr_<level> forms, just use pr_<level> Miscellaneous changes around these conversions: Add a missing newline to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2013 1 次提交
-
-
由 Li RongQing 提交于
use skb_partial_csum_set() to simplify the codes Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 5月, 2013 1 次提交
-
-
由 Wei Liu 提交于
This patch adds a new feature called feature-split-event-channels for netfront, enabling it to handle TX and RX events separately. If netback does not support this feature, it falls back to use single event channel. If netfront fails to setup split event channels, it will try falling back to single event channel. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 5月, 2013 1 次提交
-
-
由 Wei Liu 提交于
We should correctly free related resources (grant ref, memory page, evtchn) when setup_netfront fails. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2013 2 次提交
-
-
由 Wei Liu 提交于
The maximum packet including header that can be handled by netfront / netback wire format is 65535. Reduce gso_max_size accordingly. Drop skb and print warning when skb->len > 65535. This can 1) save the effort to send malformed packet to netback, 2) help spotting misconfiguration of netfront in the future. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
Also fix a typo in comment. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2013 2 次提交
-
-
由 Wei Liu 提交于
This function is in fact counting the ring slots required for responses. Separate the concepts of ring slots and skb frags make the code clearer, as now netfront and netback can have different MAX_SKB_FRAGS, slot and frag are not mapped 1:1 any more. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
This variable is supposed to hold reference to the last extra_info in the loop. However there is only type of extra info here and the loop to process extra info is missing, so this variable is never used and causes confusion. Remove it at the moment. We can add it back when necessary. Signed-off-by: NWei Liu <wei.liu2@citrix.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2013 1 次提交
-
-
由 Ian Campbell 提交于
Using RX_COPY_THRESHOLD is incorrect if the SKB is actually smaller than that. We have already accounted for this in NETFRONT_SKB_CB(skb)->pull_to so use that instead. Fixes WARN_ON from skb_try_coalesce. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: annie li <annie.li@oracle.com> Cc: xen-devel@lists.xen.org Cc: netdev@vger.kernel.org Cc: stable@kernel.org # 3.7.x only Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2012 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 11月, 2012 1 次提交
-
-
由 Ian Campbell 提交于
An SKB paged fragment can consist of a compound page with order > 0. However the netchannel protocol deals only in PAGE_SIZE frames. Handle this in xennet_make_frags by iterating over the frames which make up the page. This is the netfront equivalent to 6a8ed462 for netback. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Cc: xen-devel@lists.xen.org Cc: Eric Dumazet <edumazet@google.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: ANNIE LI <annie.li@oracle.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Stefan Bader <stefan.bader@canonical.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2012 1 次提交
-
-
由 Ian Campbell 提交于
I'm slightly concerned by the "only in exceptional circumstances" comment on __pskb_pull_tail but the structure of an skb just created by netfront shouldn't hit any of the especially slow cases. This approach still does slightly more work than the old way, since if we pull up the entire first frag we now have to shuffle everything down where before we just received into the right place in the first place. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mel Gorman <mgorman@suse.de> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2012 1 次提交
-
-
由 Amerigo Wang 提交于
I believe net/core/dev.c is a better place for netif_notify_peers(), because other net event notify functions also stay in this file. And rename it to netdev_notify_peers(). Cc: David S. Miller <davem@davemloft.net> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2012 1 次提交
-
-
由 Stefano Stabellini 提交于
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 27 6月, 2012 1 次提交
-
-
由 Ian Campbell 提交于
Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190Reported-by: NGeorge Shuklin <george.shuklin@gmail.com> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Tested-by: NWilliam Dauchy <wdauchy@gmail.com> Cc: stable@kernel.org Cc: 675190@bugs.debian.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2012 1 次提交
-
-
由 Marek Marczykowski 提交于
Netfront driver can be also useful in dom0, eg when all NICs are assigned to some domU (aka driver domain). Then using netback in domU and netfront in dom0 is the only way to get network access in dom0. Signed-off-by: NMarek Marczykowski <marmarek@invisiblethingslab.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2012 1 次提交
-
-
由 Igor Mammedov 提交于
commit b9136d207f08 xen: initialize platform-pci even if xen_emul_unplug=never breaks blkfront/netfront by not loading them because of xen_platform_pci_unplug=0 and it is never set for PV guest. Signed-off-by: NAndrew Jones <drjones@redhat.com> Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 22 3月, 2012 1 次提交
-
-
由 Igor Mammedov 提交于
When xen_emul_unplug=never is specified on kernel command line reading files from /sys/hypervisor is broken (returns -EBUSY). It is caused by xen_bus dependency on platform-pci and platform-pci isn't initialized when xen_emul_unplug=never is specified. Fix it by allowing platform-pci to ignore xen_emul_unplug=never, and do not intialize xen_[blk|net]front instead. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Joe Perches 提交于
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2012 1 次提交
-
-
由 Wei Liu 提交于
Signed-off-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 1月, 2012 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
add polling interface to xen-netfront device to support netconsole This patch also alters the spin_lock usage to use irqsave variant. Documentation/networking/netdevices.txt states that start_xmit can be called with interrupts disabled by netconsole and therefore using the irqsave/restore locking in this function is looks correct. Signed-off-by: NTina.Yang <tina.yang@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NZhenzhong.Duan <zhenzhong.duan@oracle.com> Tested-by: Ngurudas.pai <gurudas.pai@oracle.com> [v1: Copy-n-pasted Ian Campbell comments] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2012 1 次提交
-
-
由 Jan Beulich 提交于
The 'name', 'owner', and 'mod_name' members are redundant with the identically named fields in the 'driver' sub-structure. Rather than switching each instance to specify these fields explicitly, introduce a macro to simplify this. Eliminate further redundancy by allowing the drvname argument to DEFINE_XENBUS_DRIVER() to be blank (in which case the first entry from the ID table will be used for .driver.name). Also eliminate the questionable xenbus_register_{back,front}end() wrappers - their sole remaining purpose was the checking of the 'owner' field, proper setting of which shouldn't be an issue anymore when the macro gets used. v2: Restore DRV_NAME for the driver name in xen-pciback. Signed-off-by: NJan Beulich <jbeulich@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 13 12月, 2011 1 次提交
-
-
由 Laszlo Ersek 提交于
After a guest is live migrated, the xen-netfront driver emits a gratuitous ARP message, so that networking hardware on the target host's subnet can take notice, and public routing to the guest is re-established. However, if the packet appears on the backend interface before the backend is added to the target host's bridge, the packet is lost, and the migrated guest's peers become unable to talk to the guest. A sufficient two-parts condition to prevent the above is: (1) ensure that the backend only moves to Connected xenbus state after its hotplug scripts completed, ie. the netback interface got added to the bridge; and (2) ensure the frontend only queues the gARP when it sees the backend move to Connected. These two together provide complete ordering. Sub-condition (1) is already satisfied by commit f942dc25 in Linus' tree, based on commit 6b0b80ca7165 from [1]. In general, the full condition is sufficient, not necessary, because, according to [2], live migration has been working for a long time without satisfying sub-condition (2). However, after 6b0b80ca7165 was backported to the RHEL-5 host to ensure (1), (2) still proved necessary in the RHEL-6 guest. This patch intends to provide (2) for upstream. The Reviewed-by line comes from [3]. [1] git://xenbits.xen.org/people/ianc/linux-2.6.git#upstream/dom0/backend/netback-history [2] http://old-list-archives.xen.org/xen-devel/2011-06/msg01969.html [3] http://old-list-archives.xen.org/xen-devel/2011-07/msg00484.htmlSigned-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2011 2 次提交
-
-
由 Michał Mirosław 提交于
Save some punctuation by using bool type's property equivalent to doubled negation operator. Reported-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2011 1 次提交
-
-
由 stephen hemminger 提交于
Convert xen driver to 64 bit statistics interface. Use stats_sync to ensure that 64 bit update is read atomically on 32 bit platform. Put hot statistics into per-cpu table. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
Konrad reports: [ 0.930811] RTNL: assertion failed at /home/konrad/ssd/linux/net/core/dev.c (5258) [ 0.930821] Pid: 22, comm: xenwatch Not tainted 2.6.39-05193-gd762f438 #1 [ 0.930825] Call Trace: [ 0.930834] [<ffffffff8143bd0e>] __netdev_update_features+0xae/0xe0 [ 0.930840] [<ffffffff8143dd41>] netdev_update_features+0x11/0x30 [ 0.930847] [<ffffffffa0037105>] netback_changed+0x4e5/0x800 [xen_netfront] [ 0.930854] [<ffffffff8132a838>] xenbus_otherend_changed+0xa8/0xb0 [ 0.930860] [<ffffffff8157ca99>] ? _raw_spin_unlock_irqrestore+0x19/0x20 [ 0.930866] [<ffffffff8132adfe>] backend_changed+0xe/0x10 [ 0.930871] [<ffffffff8132875a>] xenwatch_thread+0xba/0x180 [ 0.930876] [<ffffffff810a8ba0>] ? wake_up_bit+0x40/0x40 [ 0.930881] [<ffffffff813286a0>] ? split+0xf0/0xf0 [ 0.930886] [<ffffffff810a8646>] kthread+0x96/0xa0 [ 0.930891] [<ffffffff815855a4>] kernel_thread_helper+0x4/0x10 [ 0.930896] [<ffffffff815846b3>] ? int_ret_from_sys_call+0x7/0x1b [ 0.930901] [<ffffffff8157cf61>] ? retint_restore_args+0x5/0x6 [ 0.930906] [<ffffffff815855a0>] ? gs_change+0x13/0x13 This update happens in xenbus watch callback context and hence does not already hold the rtnl. Take the lock as necessary. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
We need to assume that all features will be available when registering the netdev otherwise they are ommitted from the initial set of dev->wanted_features. When we connect to the backed we reduce the set as necessary due to the call to netdev_update_features() in xennet_connect(). Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Must declare xennet_fix_features() and xennet_set_features() before using them. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
Not tested in any way. The original code for offload setting seems broken as it resets the features on every netback reconnect. This will set GSO_ROBUST at device creation time (earlier than connect time). RX checksum offload is forced on - so advertise as it is. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2011 1 次提交
-
-
由 Javier Martinez Canillas 提交于
The IRQF_SAMPLE_RANDOM flag is marked as deprecated and will be removed. Every input point to the kernel's entropy pool have to better document the type of entropy source it is. drivers/char/random.c now implements a set of interfaces that can be used for devices to collect enviromental noise. IRQF_SAMPLE_RANDOM will be replaced with these add_*_randomness exported functions. Network drivers are not a good source of entropy. They use as a source of entropy essentially a remote host. Which means that the source of entropy can be potentially controlled by an attacker. Also, with heavy workloads the entropy decreases due to less hardware interrupts happening thanks to irq mitigation and NAPI. If a system relies in its network interface as a entropy source it has a false sense of security. Systems that don't have devices whose drivers are good sources of entropy, should either use a hardware random number generator or feed the kernel's entropy pool from userspace using other sources of entropy such as EGD, video_entropyd, timer_entropyd and audio-entropyd. Signed-off-by: NJavier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 3月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
netback is the host side counterpart to the frontend driver in drivers/net/xen-netfront.c. The PV protocol is also implemented by frontend drivers in other OSes too, such as the BSDs and even Windows. The patch is based on the driver from the xen.git pvops kernel tree but has been put through the checkpatch.pl wringer plus several manual cleanup passes and review iterations. The driver has been moved from drivers/xen/netback to drivers/net/xen-netback. One major change from xen.git is that the guest transmit path (i.e. what looks like receive to netback) has been significantly reworked to remove the dependency on the out of tree PageForeign page flag (a core kernel patch which enables a per page destructor callback on the final put_page). This page flag was used in order to implement a grant map based transmit path (where guest pages are mapped directly into SKB frags). Instead this version of netback uses grant copy operations into regular memory belonging to the backend domain. Reinstating the grant map functionality is something which I would like to revisit in the future. Note that this driver depends on 2e820f58 "xen/irq: implement bind_interdomain_evtchn_to_irqhandler for backend drivers" which is in linux next via the "xen-two" tree and is intended for the 2.6.39 merge window: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git stable/backends this branch has only that single commit since 2.6.38-rc2 and is safe for cross merging into the net branch. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2011 2 次提交
-
-
由 Eric Dumazet 提交于
commit e9a799ea (xen: netfront: ethtool stats fields should be unsigned long) made rx_gso_checksum_fixup an unsigned long. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Fixup the rx_gso_checksum_fixup field added in e0ce4af9 to be unsigned long as suggested by Ben Hutchings in <1298919198.2569.14.camel@bwh-desktop> Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2011 1 次提交
-
-
由 Ian Campbell 提交于
The Linux network stack expects all GSO SKBs to have ip_summed == CHECKSUM_PARTIAL (which implies that the frame contains a partial checksum) and the Xen network ring protocol similarly expects an SKB which has GSO set to also have NETRX_csum_blank (which also implies a partial checksum). However there have been cases of buggy guests which mark a frame as GSO but do not set csum_blank. If we detect that we a receiving such a frame (which manifests as ip_summed != PARTIAL && skb_is_gso) then force the SKB to partial and recalculate the checksum, since we cannot rely on the peer having done so if they have not set csum_blank. Add an ethtool stat to track occurances of this event. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David Miller <davem@davemloft.net> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2011 1 次提交
-
-
由 Jesse Gross 提交于
Now that there is a single function that can compute the device features relevant to a packet, we don't want to run it for each offload. This converts netif_needs_gso() to take the features of the device, rather than computing them itself. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-