- 18 12月, 2009 4 次提交
-
-
由 Frederic Weisbecker 提交于
The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: NCyrill Gorcunov <gorcunov@gmail.com> Reported-by: NMichal Marek <mmarek@suse.cz> Reported-by: NAndrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
John Blackwood reported: > on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded), > and 32 bit (x86) kernel, once you change the irq smp_affinity of an irq > to be less than all cpus in the system, you can never change really the > irq smp_affinity back to be all cpus in the system (0xff) again, > even though no error status is returned on the "/bin/echo ff > > /proc/irq/[n]/smp_affinity" operation. > > This is due to that fact that BAD_APICID has the same value as > all cpus (0xff) on 32bit kernels, and thus the value returned from > set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated > as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes > are made. set_desc_affinity() is already checking if the incoming cpu mask intersects with the cpu online mask or not. So there is no need for the apic op cpu_mask_to_apicid_and() to check again and return BAD_APICID. Remove the BAD_APICID return value from cpu_mask_to_apicid_and() and also fix set_desc_affinity() to return -1 instead of using BAD_APICID to represent error conditions (as cpu_mask_to_apicid_and() can return logical or physical apicid values and BAD_APICID is really to represent bad physical apic id). Reported-by: NJohn Blackwood <john.blackwood@ccur.com> Root-caused-by: NJohn Blackwood <john.blackwood@ccur.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1261103386.2535.409.camel@sbs-t61> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
It says Warning: objdump version is older than 2.19 Warning: Skipping posttest. because it used the wrong field from `objdump -v': akpm:/usr/src/25> /opt/crosstool/gcc-4.0.2-glibc-2.3.6/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu-objdump -v GNU objdump 2.16.1 Copyright 2005 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> LKML-Reference: <200912172326.nBHNQaQl024796@imap1.linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
-
由 Pallipadi, Venkatesh 提交于
Commit 83ce4009 did the following change If the TSC is constant and non-stop, also set it reliable. But, there seems to be few systems that will end up with TSC warp across sockets, depending on how the cpus come out of reset. Skipping TSC sync test on such systems may result in time inconsistency later. So, reenable TSC sync test even on constant and non-stop TSC systems. Set, sched_clock_stable to 1 by default and reset it in mark_tsc_unstable, if TSC sync fails. This change still gives perf benefit mentioned in 83ce4009 for systems where TSC is reliable. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091217202702.GA18015@linux-os.sc.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 17 12月, 2009 11 次提交
-
-
由 Linus Torvalds 提交于
The loop condition is fragile: we compare an unsigned value to zero, and then decrement it by something larger than one in the loop. All the callers should be passing in appropriately aligned buffer lengths, but it's better to just not rely on it, and have some appropriate defensive loop limits. Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland Dreier 提交于
Not all awk implementations (including the default awk in Ubuntu 9.10) support POSIX character classes. Since x86-opcode-map.txt is plain ASCII, we can just use explicit ranges for lower case, alphabetic, and alphanumeric characters instead. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <adabphy750b.fsf@roland-alpha.cisco.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Frederic Weisbecker 提交于
perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker It's just wasteful for stacktrace users like perf to walk through every entries on the stack whereas these only accept reliable ones, ie: that the frame pointer validates. Since perf requires pure reliable stacktraces, it needs a stack walker based on frame pointers-only to optimize the stacktrace processing. This might solve some near-lockup scenarios that can be triggered by call-graph tracing timer events. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261024834-5336-2-git-send-regression-fweisbec@gmail.com> [ v2: fix for modular builds and small detail tidyup ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
The current print_context_stack helper that does the stack walking job is good for usual stacktraces as it walks through all the stack and reports even addresses that look unreliable, which is nice when we don't have frame pointers for example. But we have users like perf that only require reliable stacktraces, and those may want a more adapted stack walker, so lets make this function a callback in stacktrace_ops that users can tune for their needs. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Rusty Russell 提交于
Noone uses this wrapper yet, and Ingo asked that it be kept consistent with current task_struct usage. (One user crept in via linux-next: fixed) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au. Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <tj@kernel.org>
-
由 Yinghai Lu 提交于
Due to recent changes wakeup and mptable, we run out of early reservations on 32-bit NUMA. Thus, adjust the available number. Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4B22D754.2020706@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Yinghai Lu 提交于
Found one system that boot from socket1 instead of socket0, SRAT get rejected... [ 0.000000] SRAT: Node 1 PXM 0 0-a0000 [ 0.000000] SRAT: Node 1 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000 [ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000 [ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000 [ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000 [ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000 [ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000 [ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000 [ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000 ... [ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used [ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used [ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used [ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. the early_node_map is not sorted because node0 with non zero start come first. so try to sort it right away after all regions are registered. also fixs refression by 8716273c (x86: Export srat physical topology) -v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g) -v3: update comments. Reported-and-tested-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4B2579D2.3010201@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Suresh Siddha 提交于
xsave_cntxt_init() does something like: cpuid(0xd, ..); // find out what features FP/SSE/.. etc are supported xsetbv(); // enable the features known to OS cpuid(0xd, ..); // find out the size of the context for features enabled Depending on what features get enabled in xsetbv(), value of the cpuid.eax=0xd.ecx=0.ebx changes correspondingly (representing the size of the context that is enabled). As we don't have volatile keyword for native_cpuid(), gcc 4.1.2 optimizes away the second cpuid and the kernel continues to use the cpuid information obtained before xsetbv(), ultimately leading to kernel crash on processors supporting more state than the legacy FP/SSE. Add "volatile" for native_cpuid(). Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1261009542.2745.55.camel@sbs-t61.sc.intel.com> Cc: stable@kernel.org Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Borislav Petkov 提交于
Randy Dunlap reported the following build error: "When CONFIG_SMP=n, CONFIG_X86_MSR=m: ERROR: "msrs_free" [drivers/edac/amd64_edac_mod.ko] undefined! ERROR: "msrs_alloc" [drivers/edac/amd64_edac_mod.ko] undefined!" This is due to the fact that <arch/x86/lib/msr.c> is conditioned on CONFIG_SMP and in the UP case we have only the stubs in the header. Fork off SMP functionality into a new file (msr-smp.c) and build msrs_{alloc,free} unconditionally. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> LKML-Reference: <20091216231625.GD27228@liondog.tnic> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Andreas Herrmann 提交于
Use NodeId MSR to get NodeId and number of nodes per processor. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20091216144355.GB28798@alberich.amd.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Al Viro 提交于
* hpux_pipe() - no need to take BKL * sys32_pipe() in arch/x86/ia32 and xtensa_pipe() in arch/xtensa - no need at all, since both functions are open-coded sys_pipe() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 12月, 2009 21 次提交
-
-
由 Akinobu Mita 提交于
Use bitmap library and kill some unused iommu helper functions. 1. s/iommu_area_free/bitmap_clear/ 2. s/iommu_area_reserve/bitmap_set/ 3. Use bitmap_find_next_zero_area instead of find_next_zero_area This cannot be simple substitution because find_next_zero_area doesn't check the last bit of the limit in bitmap 4. Remove iommu_area_free, iommu_area_reserve, and find_next_zero_area Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Create a function to generate the value that is written to the UV hub MMR to cause an IPI interrupt to be sent. The function will be used in the GRU message queue error recovery code that sends IPIs to nodes in remote partitions. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
The UV BIOS has moved the location of some of their pointers to the "partition reserved page" from memory into a uv hub MMR. The GRU does not support bcopy operations from MMR space so we need to special case the MMR addresses using VLOAD operations. Additionally, the BIOS call for registering a message queue watchlist has removed the 'blade' value and eliminated the structure that was being passed in. This is also reflected in this patch. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Provide a mechanism for determining if a global physical address is pointing to a UV hub MMR. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
The UV BIOS has been updated to implement some of our interface functionality differently than originally expected. These patches update the kernel to the bios implementation and include a few minor bug fixes which prevent us from doing significant testing on real hardware. This patch: For SGI UV systems, translate from a global physical address back to a socket physical address. This does nothing to ensure the socket physical address is actually addressable by the kernel. That is the responsibility of the user of the function. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Beulich 提交于
dma_mask is, when interpreted as address, the last valid byte, and hence comparison msut also be done using the last valid of the buffer in question. Also fix the open-coded instances in lib/swiotlb.c. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Becky Bruce <beckyb@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Currently all architectures but microblaze unconditionally define USE_ELF_CORE_DUMP. The microblaze omission seems like an error to me, so let's kill this ifdef and make sure we are the same everywhere. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk> Cc: <linux-arch@vger.kernel.org> Cc: Michal Simek <michal.simek@petalogix.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Suggested by Roland. Unlike powepc, x86 always calls tracehook_report_syscall_exit(step) with step = 0, and sends the trap by hand. This results in unnecessary SIGTRAP when PTRACE_SINGLESTEP follows the syscall-exit stop. Change syscall_trace_leave() to pass the correct "step" argument to tracehook and remove the send_sigtrap() logic. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NRoland McGrath <roland@redhat.com> Cc: <linux-arch@vger.kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Suggested by Roland. Implement user_single_step_siginfo() for x86. Extract this code from send_sigtrap(). Since x86 calls tracehook_report_syscall_exit(step => 0) the new helper is not used yet. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NRoland McGrath <roland@redhat.com> Cc: <linux-arch@vger.kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sheng Yang 提交于
Clean up write_tsc() and write_tscp_aux() by replacing hardcoded values. No change in functionality. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> LKML-Reference: <1260942485-19156-4-git-send-email-sheng@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 H. Peter Anvin 提交于
register_chrdev() hardcodes registering 256 minors, presumably to avoid breaking old drivers. However, we need to register enough minors so that we have all possible CPUs. checkpatch warns on this patch, but the patch is correct: NR_CPUS here is a static *upper bound* on the *maximum CPU index* (not *number of CPUs!*) and that is what we want. Reported-and-tested-by: NRuss Anderson <rja@sgi.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> LKML-Reference: <tip-*@git.kernel.org>
-
由 Jonathan Nieder 提交于
The instruction attribute table generator fails when run by mawk or original-awk: $ mawk -f arch/x86/tools/gen-insn-attr-x86.awk \ arch/x86/lib/x86-opcode-map.txt > /dev/null Semantic error at 240: Second IMM error $ echo $? 1 Line 240 contains "c8: ENTER Iw,Ib", which indicates that this instruction has two immediate operands, the second of which is one byte. The script loops through the immediate operands using a for loop. Unfortunately, there is no guarantee in awk that a for (variable in array) loop will return the indices in increasing order. Internally, both original-awk and mawk iterate over a hash table for this purpose, and both implementations happen to produce the index 2 before 1. The supposed second immediate operand is more than one byte wide, producing the error. So loop over the indices in increasing order instead. As a side-effect, with mawk this means the silly two-entry hash table never has to be built. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Acked-by Masami Hiramatsu <mhiramat@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091213220437.GA27718@progeny.tock> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 André Goddard Rosa 提交于
Makes use of skip_spaces() defined in lib/string.c for removing leading spaces from strings all over the tree. It decreases lib.a code size by 47 bytes and reuses the function tree-wide: text data bss dec hex filename 64688 584 592 65864 10148 (TOTALS-BEFORE) 64641 584 592 65817 10119 (TOTALS-AFTER) Also, while at it, if we see (*str && isspace(*str)), we can be sure to remove the first condition (*str) as the second one (isspace(*str)) also evaluates to 0 whenever *str == 0, making it redundant. In other words, "a char equals zero is never a space". Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below, and found occurrences of this pattern on 3 more files: drivers/leds/led-class.c drivers/leds/ledtrig-timer.c drivers/video/output.c @@ expression str; @@ ( // ignore skip_spaces cases while (*str && isspace(*str)) { \(str++;\|++str;\) } | - *str && isspace(*str) ) Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Neil Brown <neilb@suse.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: David Howells <dhowells@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
With generic modular drivers handling all of this stuff, the geode-specific code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers now handle this. Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
..and include them in the lxfb/gxfb drivers rather than asm/geode.h (where possible). Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
The only thing that uses this is the reboot_fixups code. Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's not x86 specific, it's modular, and it makes use of a PCI BAR rather than a random MSR. Currently module unloading is not supported; it's uncertain whether or not it can be made work with the hardware. [akpm@linux-foundation.org: add X86 dependency] Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
Previously, OLPC support for the mic extensions was only enabled in the ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set. This was because the old geode GPIO code was written in a manner that assumed CONFIG_MGEODE_LX. With the new cs553x-gpio driver, this is no longer the case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead include a requirement on GPIOLIB. We use the generic GPIO API rather than the cs553x-specific API. Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend (allowing GPIO users to use the generic GPIO API if desired) while also allowing architecture-specific users directly (via the cs5535_gpio_* functions). Tested on an OLPC machine. Some Leemotes also use CS5536 (with a mips cpu), which is why this is in drivers/gpio rather than arch/x86. Currently, it conflicts with older geode GPIO support; once MFGPT support is reworked to also be more generic, the older geode code will be removed. Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Reviewed-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lee Schermerhorn 提交于
Move definition of NUMA_NO_NODE from ia64 and x86_64 arch specific headers to generic header 'linux/numa.h' for use in generic code. NUMA_NO_NODE replaces bare '-1' where it's used in this series to indicate "no node id specified". Ultimately, it can be used to replace the -1 elsewhere where it is used similarly. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NMel Gorman <mel@csn.ul.ie> Reviewed-by: NAndi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 12月, 2009 4 次提交
-
-
由 FUJITA Tomonori 提交于
The commit f4780ca0 moves swiotlb initialization before dma32_free_bootmem(). It's supposed to fix a bug that the commit 75f1cdf1 introduced, we initialize SWIOTLB right after dma32_free_bootmem so we wrongly steal memory area allocated for GART with broken BIOS earlier. However, the above commit introduced another problem, which likely breaks machines with huge amount of memory. Such a box use the majority of DMA32_ZONE so there is no memory for swiotlb. With this patch, the x86 IOMMU initialization sequence are: 1. We set swiotlb to 1 in the case of (max_pfn > MAX_DMA32_PFN && !no_iommu). If swiotlb usage is forced by the boot option, we go to the step 3 and finish (we don't try to detect IOMMUs). 2. We call the detection functions of all the IOMMUs. The detection function sets x86_init.iommu.iommu_init to the IOMMU initialization function (so we can avoid calling the initialization functions of all the IOMMUs needlessly). 3. We initialize swiotlb (and set dma_ops to swiotlb_dma_ops) if swiotlb is set to 1. 4. If the IOMMU initialization function doesn't need swiotlb (e.g. the initialization is sucessful) then sets swiotlb to zero. 5. If we find that swiotlb is set to zero, we free swiotlb resource. Reported-by: NYinghai Lu <yinghai@kernel.org> Reported-by: NRoland Dreier <rdreier@cisco.com> Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <20091215204729A.fujita.tomonori@lab.ntt.co.jp> Tested-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Rusty Russell 提交于
For CONFIG_PARAVIRT, load_gs_index is an inline function (it's #defined to native_load_gs_index otherwise). Exporting an inline function breaks the new assembler-based alphabetical sorted symbol list: Today's linux-next build (x86_64 allmodconfig) failed like this: .tmp_exports-asm.o: In function `__ksymtab_load_gs_index': (__ksymtab_sorted+0x5b40): undefined reference to `load_gs_index' Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> To: x86@kernel.org Cc: alan-jenkins@tuffmail.co.uk
-
由 Zhao Yakui 提交于
Currently, ARB_DISABLE is a NOP on all of the recent Intel platforms. For such platforms, reduce contention on c3_lock by skipping the fake ARB_DISABLE. The cpu model id on one laptop is 14. If we disable ARB_DISABLE on this box, the box can't be booted correctly. But if we still enable ARB_DISABLE on this box, the box can be booted correctly. So we still use the ARB_DISABLE for the cpu which mode id is less than 0x0f. http://bugzilla.kernel.org/show_bug.cgi?id=14700Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Acked-by: NPallipadi, Venkatesh <venkatesh.pallipadi@intel.com> cc: stable@kernel.org Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Thomas Gleixner 提交于
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NIngo Molnar <mingo@elte.hu>
-