On some x86 tablets with a silead touchscreen the windows logo on the
front is a capacitive home button. Touching this button results in a touch
with bits 12-15 of the Y coordinates set, while normally only the lower 12
are used.

Detect this and report a KEY_LEFTMETA press when this happens. Note for
now we only respond to the Y coordinate bits 12-15 containing 0x01, on some
tablets *without* a capacative button I've noticed these bits containing
0x04 when crossing the edges of the screen.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Apart from whitespace differences, this block of macros is repeated
twice:

$ x=./drivers/input/mouse/cyapa_gen3.c; diff -w -u <(sed -n '139,181p' $x) <(sed -n '182,224p' $x)
$
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This duplicate include has been found with scripts/checkincludes.pl but
it has been removed manually to avoid removing false positives.
Signed-off-by: NPravin Shedge <pravin.shedge4linux@gmail.com>
Patchwork-Id: 10092051
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add hardware version to the firmware file name to handle scenarios where
single system image supports variety of devices.
Signed-off-by: NJeffrey Lin <jeffrey.lin@rad-ic.com>
Patchwork-Id: 10127677
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix a spelling mistake: buttong -> button
Signed-off-by: NZhuohua Li <lizhuohua1994@gmail.com>
Patchwork-Id: 10134469
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This driver was merged in 2011 as a tool for detecting the orientation
of a screen. The device driver assumes board file setup using the
platform data from <linux/input/gpio_tilt.h>. But no boards in the
kernel tree defines this platform data.

As I am faced with refactoring drivers to use GPIO descriptors and
pass decriptor tables from boards, or use the device tree device
drivers like these creates a serious problem: I cannot fix them and
cannot test them, not even compile-test them with a system actually
using it (no in-tree boardfile).

I suggest to delete this driver and rewrite it using device tree if
it is still in use on actively maintained systems.

I can also offer to rewrite it out of the blue using device tree if
someone promise to test it and help me iterate it.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Patchwork-Id: 10133609
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

struct timeval which is part of struct input_event to maintain the event
times is not y2038 safe.

Real time timestamps are also not ideal for input_event as this time can go
backwards as noted in the patch a80b83b7 by John Stultz.

The patch switches the timestamps to use monotonic time from realtime time.
This is assuming no one is using absolute times from these timestamps.

The structure to maintain input events will be changed in a different
patch.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NPeter Hutterer <peter.hutterer@who-t.net>
Patchwork-Id: 10118255
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This gets rid of the deprecated do_gettimeofday() call in favor
of ktime_get(), which is also more reliable as it uses monotonic
times. The code now gets a bit simpler.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076621
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

struct timeval is not y2038 safe, and what mlc->instart do is
scheduling a task in a fixed timeout, so jiffies is the
simplest choice here.

In hilse_donode(), the expires in mod_timer equals

	jiffies + intimeout - (now - instart)

If we use jiffies in 'now', the expires equals

	instart + intimeout

So, all we need to do is that making sure expires is a future
timestamp before passed it to mod_timer.

[arnd: slightly simplified patch further]

Link: https://lists.linaro.org/pipermail/y2038/2015-October/000937.htmlSigned-off-by: NWEN Pingbo <pingbo.wen@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076615
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Since mlc->lcv_t is only interested in seconds, directly using time64_t
here.

This gets rid of the deprecated do_gettimeofday() and avoids problems
with time going backwards since we now use the monotonic clocksource.
Signed-off-by: NWEN Pingbo <pingbo.wen@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076611
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114761
Addresses-Coverity-ID: 114762
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114763
Addresses-Coverity-ID: 114764
Addresses-Coverity-ID: 114765
Addresses-Coverity-ID: 114766
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114767
Addresses-Coverity-ID: 114768
Addresses-Coverity-ID: 114769
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

We have to unlock before returning if input_allocate_device() fails.

Fixes: 04ce40a6 ("Input: uinput - remove uinput_allocate_device()")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The S6SY761 touchscreen is a capicitive multi-touch controller
for mobile use. It's connected with i2c at the address 0x48.

This commit provides a basic version of the driver which can
handle only initialization, touch events and power states.

The controller is controlled by a firmware which, in the version
I currently have, doesn't provide all the possible
functionalities mentioned in the datasheet.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The HiDeep touchscreen device is a capacitive multi-touch controller
mainly for multi-touch supported devices use. It use I2C interface for
communication to IC and provide axis X, Y, Z locations for ten finger
touch through input event interface to userspace.

It support the Crimson and the Lime two type IC. They are different
the number of channel supported and FW size. But the working protocol
is same.
Signed-off-by: NAnthony Kim <anthony.kim@hideep.com>
Acked-by: NRob Herring <robh+dt@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 1fa59bda ("ARM: shmobile: Remove legacy board code for
Armadillo-800 EVA"), removed the last user of st1232_pdata and the
"st1232-ts" platform device.  All remaining users use DT.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with mainline to bring in SPDX markings to avoid annoying merge
problems when some header files get deleted.

Pull x86 fixes from Ingo Molnar:
 "Two fixes:

   - A PCID related revert that fixes power management and performance
     regressions.

   - The module loader robustization and sanity check commit is rather
     fresh, but it looked like a good idea to apply because of the
     hidden data corruption problem such invalid modules could cause"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/module: Detect and skip invalid relocations
  Revert "x86/mm: Stop calling leave_mm() in idle code"

Pull RAS fix from Ingo Molnar:
 "Fix an RCU warning that triggers when /dev/mcelog is used"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mcelog: Get rid of RCU remnants

Pull perf fixes from Ingo Molnar:
 "Various fixes:

   - synchronize kernel and tooling headers

   - cgroup support fix

   - two tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/headers: Synchronize kernel ABI headers
  perf/cgroup: Fix perf cgroup hierarchy support
  perf tools: Unwind properly location after REJECT
  perf symbols: Fix memory corruption because of zero length symbols

Pull irq fix from Ingo Molnar:
 "An irqchip driver init fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-mvebu-gicp: Add missing spin_lock init

Pull core fixes from Ingo Molnar:

 - workaround for gcc asm handling

 - futex race fixes

 - objtool build warning fix

 - two watchdog fixes: a crash fix (revert) and a bug fix for
   /proc/sys/kernel/watchdog_thresh handling.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Prevent GCC from merging annotate_unreachable(), take 2
  objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
  watchdog/hardlockup/perf: Use atomics to track in-use cpu counter
  watchdog/harclockup/perf: Revert a33d4484 ("watchdog/hardlockup/perf: Simplify deferred event destroy")
  futex: Fix more put_pi_state() vs. exit_pi_state_list() races

Merge tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull enforcement statement update from Greg KH:
 "Documentation: enforcement-statement: name updates

  Here are 12 patches for the kernel-enforcement-statement.rst file that
  add new names, fix the ordering of them, remove a duplicate, and
  remove some company markings that wished to be removed.

  All of these have passed the 0-day testing, even-though it is just a
  documentation file update :)"

* tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Add Frank Rowand to list of enforcement statement endorsers
  doc: add Willy Tarreau to the list of enforcement statement endorsers
  Documentation: Add Tim Bird to list of enforcement statement endorsers
  Documentation: Add my name to kernel enforcement statement
  Documentation: kernel-enforcement-statement.rst: proper sort names
  Documentation: Add Arm Ltd to kernel-enforcement-statement.rst
  Documentation: kernel-enforcement-statement.rst: Remove Red Hat markings
  Documentation: Add myself to the enforcement statement list
  Documentation: Sign kernel enforcement statement
  Add ack for Trond Myklebust to the enforcement statement
  Documentation: update kernel enforcement support list
  Documentation: add my name to supporters

There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address.  This is a
silent failure which can corrupt memory in unexpected places.

On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand.  Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull ARM fixes from Russell King:

 - omit EFI memory map sorting, which was recently introduced, but
   caused problems with the decompressor due to additional sections
   being emitted.

 - avoid unaligned load fault-generating instructions in the
   decompressor by switching to a private unaligned implementation.

 - add a symbol into the decompressor to further debug non-boot
   situations (ld's documentation is extremely poor for how "." works,
   ld doesn't seem to follow its own documentation!)

 - parse endian information to sparse

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: add debug ".edata_real" symbol
  ARM: 8716/1: pass endianness info to sparse
  efi/libstub: arm: omit sorting of the UEFI memory map
  ARM: 8715/1: add a private asm/unaligned.h

Pull KVM fixes from Paolo Bonzini:
 "Fixes for interrupt controller emulation in ARM/ARM64 and x86, plus a
  one-liner x86 KVM guest fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Update APICv on APIC reset
  KVM: VMX: Do not fully reset PI descriptor on vCPU reset
  kvm: Return -ENODEV from update_persistent_clock
  KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables
  KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS
  KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value
  KVM: arm/arm64: vgic-its: Fix return value for device table restore
  arm/arm64: kvm: Disable branch profiling in HYP code
  arm/arm64: kvm: Move initialization completion message
  arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort
  KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table

Pull ARM SoC fixes from Arnd Bergmann:
 "Only two patches came in over the last two weeks: Uniphier USB support
  needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a
  Marvell MVEBU stability issue has been fixed"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: mvebu: pl310-cache disable double-linefill
  arm64: dts: uniphier: add STDMAC clock to EHCI nodes
  ARM: dts: uniphier: add STDMAC clock to EHCI nodes

Pull MIPS fixes from James Hogan:
 "A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
  email address updates:

  Maintainership updates:
   - imgtec.com -> mips.com email addresses (this trivially updates
     comments in quite a few files, as well as MAINTAINERS)
   - Pistachio SoC maintainership update

  Fixes:
   - NI 169445 build (new platform in 4.14)
   - EVA regression (4.14)
   - SMP-CPS build & preemption regressions (4.14)
   - SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
   - ebpf_jit error return (4.13)
   - SMP-CMP build regressions (4.11 and 4.14)
   - bad UASM microMIPS encoding (3.16)
   - CM definitions (3.15)"

[ I had taken the email address updates separately, because I didn't
  expect James to send a pull request, so those got applied twice.   - Linus]

* tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: Update email address for Marcin Nowakowski
  MIPS: smp-cmp: Fix vpe_id build error
  MAINTAINERS: Update Pistachio platform maintainers
  MIPS: smp-cmp: Use right include for task_struct
  MIPS: Update Goldfish RTC driver maintainer email address
  MIPS: Update RINT emulation maintainer email address
  MIPS: CPS: Fix use of current_cpu_data in preemptible code
  MIPS: SMP: Fix deadlock & online race
  MIPS: bpf: Fix a typo in build_one_insn()
  MIPS: microMIPS: Fix incorrect mask in insn_table_MM
  MIPS: Fix CM region target definitions
  MIPS: generic: Fix compilation error from include asm/mips-cpc.h
  MIPS: Fix exception entry when CONFIG_EVA enabled
  MIPS: generic: Fix NI 169445 its build
  Update MIPS email addresses

This fixes the following warning with GCC 4.6:

  mm/migrate.o: warning: objtool: migrate_misplaced_transhuge_page()+0x71: unreachable instruction

The problem is that the compiler merged identical annotate_unreachable()
inline asm blocks, resulting in a missing 'unreachable' annotation.

This problem happened before, and was partially fixed with:

  3d1e2360 ("objtool: Prevent GCC from merging annotate_unreachable()")

That commit tried to ensure that each instance of the
annotate_unreachable() inline asm statement has a unique label.  It used
the __LINE__ macro to generate the label number.  However, even the line
number isn't necessarily unique when used in an inline function with
multiple callers (in this case, __alloc_pages_node()'s use of
VM_BUG_ON).
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Fixes: 3d1e2360 ("objtool: Prevent GCC from merging annotate_unreachable()")
Link: http://lkml.kernel.org/r/20171103221941.cajpwszir7ujxyc4@trebleSigned-off-by: NIngo Molnar <mingo@kernel.org>

This reverts commit 43858b4f.

The reason I removed the leave_mm() calls in question is because the
heuristic wasn't needed after that patch.  With the original version
of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running
kernel thread) due a flush on the loaded mm.

Unfortunately, that caused architectural issues, so now I've
reinstated these flushes on non-PCID systems in:

    commit b956575b ("x86/mm: Flush more aggressively in lazy TLB mode").

That, in turn, gives us a power management and occasionally
performance regression as compared to old kernels: a process that
goes into a deep idle state on a given CPU and gets its mm flushed
due to activity on a different CPU will wake the idle CPU.

Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an
intel_idle state that is likely to cause a TLB flush gets its mm
switched to init_mm before going idle.

FWIW, this heuristic is lousy.  Whether we should change CR3 before
idle isn't a good hint except insofar as the performance hit is a bit
lower if the TLB is getting flushed by the idle code anyway.  What we
really want to know is whether we anticipate being idle long enough
that the mm is likely to be flushed before we wake up.  This is more a
matter of the expected latency than the idle state that gets chosen.
This heuristic also completely fails on systems that don't know
whether the TLB will be flushed (e.g. AMD systems?).  OTOH it may be a
bit obsolete anyway -- PCID systems don't presently benefit from this
heuristic at all.

We also shouldn't do this callback from innermost bit of the idle code
due to the RCU nastiness it causes.  All the information need is
available before rcu_idle_enter() needs to happen.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43858b4f "x86/mm: Stop calling leave_mm() in idle code"
Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add my name to the list.
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

add me to the list.
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After the SPDX license tags were added a number of tooling headers got out of
sync with their kernel variants, generating lots of build warnings.

Sync them:

 - tools/arch/x86/include/asm/disabled-features.h,
   tools/arch/x86/include/asm/required-features.h,
   tools/include/linux/hash.h:

     Remove the SPDX tag where the kernel version does not have it.

 - tools/include/asm-generic/bitops/__fls.h,
   tools/include/asm-generic/bitops/arch_hweight.h,
   tools/include/asm-generic/bitops/const_hweight.h,
   tools/include/asm-generic/bitops/fls.h,
   tools/include/asm-generic/bitops/fls64.h,
   tools/include/uapi/asm-generic/ioctls.h,
   tools/include/uapi/asm-generic/mman-common.h,
   tools/include/uapi/sound/asound.h,
   tools/include/uapi/linux/kvm.h,
   tools/include/uapi/linux/perf_event.h,
   tools/include/uapi/linux/sched.h,
   tools/include/uapi/linux/vhost.h,
   tools/include/uapi/sound/asound.h:

     Add the SPDX tag of the respective kernel header.

 - tools/include/uapi/linux/bpf_common.h,
   tools/include/uapi/linux/fcntl.h,
   tools/include/uapi/linux/hw_breakpoint.h,
   tools/include/uapi/linux/mman.h,
   tools/include/uapi/linux/stat.h,

     Change the tag to the kernel header version:

       -/* SPDX-License-Identifier: GPL-2.0 */
       +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */

Also sync other header details:

 - include/uapi/sound/asound.h:

     Fix pointless end of line whitespace noise the header grew in this cycle.

 - tools/arch/x86/lib/memcpy_64.S:

     Sync the code and add tools/include/asm/export.h with dummy wrappers
     to support building the kernel side code in a tooling header environment.

 - tools/include/uapi/asm-generic/mman.h,
   tools/include/uapi/linux/bpf.h:

     Sync other details that don't impact tooling's use of the ABIs.
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This fixes the following warning:

  warning: objtool: x86 instruction decoder differs from kernel
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We want to fix an objtool build warning that got introduced in the latest upstream kernel.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull input fixes from Dmitry Torokhov:
 "Just a couple of fixups to the sparse-keymap module and the Microchip
  AR1021 touchscreen driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sparse-keymap - send sync event for KE_SW/KE_VSW
  Input: ar1021_i2c - set INPUT_PROP_DIRECT

Pull clk fix from Stephen Boyd:
 "One fix for USB clks on Uniphier PXs3 SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: uniphier: fix clock data for PXs3

Sync events are sent by sparse_keymap_report_entry for normal KEY_*
events, and are generated by several drivers after generating
SW_* events, so sparse_keymap_report_entry should do the same.

Without the sync, events are accumulated in the kernel.

Currently, no driver uses sparse-keymap for SW_* events, but
it is required for the intel-vbtn platform driver to generate
SW_TABLET_MODE events.
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>