move arch/x86/xen/manage.c under drivers/xen/to share codes
with x86 and ia64.
ia64/xen also uses manage.c
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

For some perverse reason, if you call add_preferred_console() it prevents
setup_early_printk() from successfully enabling the boot console -
unless you make it a preferred console too...

Also, make xenboot console output distinct from normal console output,
since it gets repeated when the console handover happens, and the
duplicated output is confusing without disambiguation.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>

The pvfb backend indicates dynamic mode support by creating node
feature_resize with a non-zero value in its xenstore directory.
xen-fbfront sends a resize notification event on mode change.  Fully
backwards compatible both ways.

Framebuffer size and initial resolution can be controlled through
kernel parameter xen_fbfront.video.  The backend enforces a separate
size limit, which it advertises in node videoram in its xenstore
directory.

xen-kbdfront gets the maximum screen resolution from nodes width and
height in the backend's xenstore directory instead of hardcoding it.

Additional goodie: support for larger framebuffers (512M on a 64-bit
system with 4K pages).

Changing the number of bits per pixels dynamically is not supported,
yet.

Ported from
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633Signed-off-by: NPat Campbell <plc@novell.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This isn't a security flaw (the backend can see all our memory
anyway).  But it's the right thing to do all the same.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

These are mostly for completeness and consistency with the other
frontends, as PVFB is typically compiled in rather than a module.

Derived from
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e

While there, add module descriptions.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add z-axis motion to pointer events.  Backward compatible, because
there's space for the z-axis in union xenkbd_in_event, and old
backends zero it.

Derived from
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/57dfe0098000
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/1edfea26a2a9
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/c3ff0b26f664Signed-off-by: NPat Campbell <plc@novell.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Without console= arguments on the kernel command line, the first
console to register becomes enabled and the preferred console (the one
behind /dev/console).  This is normally tty (assuming
CONFIG_VT_CONSOLE is enabled, which it commonly is).

This is okay as long tty is a useful console.  But unless we have the
PV framebuffer, and it is enabled for this domain, tty0 in domU is
merely a dummy.  In that case, we want the preferred console to be the
Xen console hvc0, and we want it without having to fiddle with the
kernel command line.  Commit b8c2d3df
did that for us.

Since we now have the PV framebuffer, we want to enable and prefer tty
again, but only when PVFB is enabled.  But even then we still want to
enable the Xen console as well.

Problem: when tty registers, we can't yet know whether the PVFB is
enabled.  By the time we can know (xenstore is up), the console setup
game is over.

Solution: enable console tty by default, but keep hvc as the preferred
console.  Change the preferred console to tty when PVFB probes
successfully, unless we've been given console kernel parameters.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add pte_flags() to extract the flags from a pte.  This is a special
case of pte_val() which is only guaranteed to return the pte's flags
correctly; the page number may be corrupted or missing.

The intent is to allow paravirt implementations to return pte flags
without having to do any translation of the page number (most notably,
Xen).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When enabling interrupts, we don't need to worry about preemption,
because we either enter with interrupts disabled - so no preemption -
or the caller is confused and is re-enabling interrupts on some
indeterminate processor.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The guest can legitimately change things like cr4.OSFXSR and
OSXMMEXCPT, so let it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the new sched_op hypercall, mainly because xenner doesn't support
the old one.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Xen will trap and emulate clts, but its better to use a hypercall.
Also, xenner doesn't handle clts.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When using "earlyprintk=xen", also write the console output to the raw
debug console.  This will appear on dom0's console if the hypervisor
has been compiled to allow it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add a couple of functions which can write directly to the Xen console
for debugging.  This output ends up on the host's dom0 console
(assuming it allows the domain to write there).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Non-PAE operation has been deprecated in Xen for a while, and is
rarely tested or used.  xen-unstable has now officially dropped
non-PAE support.  Since Xen/pvops' non-PAE support has also been
broken for a while, we may as well completely drop it altogether.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

driver uses symbols defined only on ARM
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Whether we sidestep it in init/main.c or not, such situations
will arise again; compiler does generate calls of strcat()
on optimizations, so we really ought to have an out-of-line
version...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... and we have few enough places using the latter to make it
simpler to do search and replace...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memcpy() from userland pointer is a Bad Thing(tm)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fallout from commit 46d7b522 ("uml: move
hppfs_kern.c to hppfs.c")
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want sys/ptrace.h before any includes of linux/ptrace.h and
asm/user.h pulls the latter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (21 commits)
  [CIFS] Remove debug statement
  Fix possible access to undefined memory region.
  [CIFS] Enable DFS support for Windows query path info
  [CIFS] Enable DFS support for Unix query path info
  [CIFS] add missing seq_printf to cifs_show_options for hard mount option
  [CIFS] add more complete mount options to cifs_show_options
  [CIFS] Add missing defines for DFS
  CIFSGetDFSRefer cleanup + dfs_referral_level_3 fixed to conform REFERRAL_V3 the MS-DFSC spec.
  Fixed DFS code to work with new 'build_path_from_dentry', that returns full path if share in the dfs, now.
  [CIFS] enable parsing for transport encryption mount parm
  [CIFS] Finishup DFS code
  [CIFS] BKL-removal: convert CIFS over to unlocked_ioctl
  [CIFS] suppress duplicate warning
  [CIFS] Fix paths when share is in DFS to include proper prefix
  add function to convert access flags to legacy open mode
  clarify return value of cifs_convert_flags()
  [CIFS] don't explicitly do a FindClose on rewind when directory search has ended
  [CIFS] cleanup old checkpatch warnings
  [CIFS] CIFSSMBPosixLock should return -EINVAL on error
  fix memory leak in CIFSFindNext
  ...

Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NIgor Mammedov <niallain@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* 'for-2.6.26' of git://linux-nfs.org/~bfields/linux: (25 commits)
  svcrdma: Verify read-list fits within RPCSVC_MAXPAGES
  svcrdma: Change svc_rdma_send_error return type to void
  svcrdma: Copy transport address and arm CQ before calling rdma_accept
  svcrdma: Set rqstp transport address in rdma_read_complete function
  svcrdma: Use ib verbs version of dma_unmap
  svcrdma: Cleanup queued, but unprocessed I/O in svc_rdma_free
  svcrdma: Move the QP and cm_id destruction to svc_rdma_free
  svcrdma: Add reference for each SQ/RQ WR
  svcrdma: Move destroy to kernel thread
  svcrdma: Shrink scope of spinlock on RQ CQ
  svcrdma: Use standard Linux lists for context cache
  svcrdma: Simplify RDMA_READ deferral buffer management
  svcrdma: Remove unused READ_DONE context flags bit
  svcrdma: Return error from rdma_read_xdr so caller knows to free context
  svcrdma: Fix error handling during listening endpoint creation
  svcrdma: Free context on post_recv error in send_reply
  svcrdma: Free context on ib_post_recv error
  svcrdma: Add put of connection ESTABLISHED reference in rdma_cma_handler
  svcrdma: Fix return value in svc_rdma_send
  svcrdma: Fix race with dto_tasklet in svc_rdma_send
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  pktgen: make sure that pktgen_thread_worker has been executed
  [VLAN]: Propagate selected feature bits to VLAN devices
  drivers/atm/: remove CVS keywords
  vlan: Correctly handle device notifications for layered VLAN devices
  net: Fix call to ->change_rx_flags(dev, IFF_MULTICAST) in dev_change_flags()
  net_sched: cls_api: fix return value for non-existant classifiers
  ipsec: Use the correct ip_local_out function
  ipv6 addrconf: Allow infinite prefix lifetime.
  ipv6 route: Fix lifetime in netlink.
  ipv6 addrconf: Fix route lifetime setting in corner case.
  ndisc: Add missing strategies for per-device retrans timer/reachable time settings.
  ipv6: Move <linux/in6.h> from header-y to unifdef-y.
  l2tp: avoid skb truesize bug if headroom is increased
  wireless: Create 'device' symlink in sysfs
  wireless, airo: waitbusy() won't delay
  libertas: fix command timeout after firmware failure
  mac80211: Add RTNL version of ieee80211_iterate_active_interfaces
  mac80211 : Association with 11n hidden ssid ap.
  hostap: fix "registers" registration in procfs
  isdn/capi: Return proper errnos on module init.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Add global register dumping facility.
  sparc: remove CVS keywords
  sparc64: remove CVS keywords

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: CDC WDM driver
  USB: ehci-orion: the Orion EHCI root hub does have a Transaction Translator
  USB: serial: ch341: New VID/PID for CH341 USB-serial
  USB: build fix
  USB: pxa27x_udc - Fix Oops
  USB: OPTION: fix name of Onda MSA501HS HSDPA modem
  USB: add TELIT HDSPA UC864-E modem to option driver
  usb-serial: Use ftdi_sio driver for RATOC REX-USB60F

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  SCSI: fix race in device_create
  USB: Core: fix race in device_create
  USB: Phidget: fix race in device_create
  s390: fix race in device_create
  SOUND: fix race in device_create
  UIO: fix race in device_create
  Power Supply: fix race in device_create
  LEDS: fix race in device_create
  IB: fix race in device_create
  ide: fix race in device_create
  fbdev: fix race in device_create
  mm: bdi: fix race in bdi_class device creation
  Driver core: add device_create_vargs and device_create_drvdata