- 27 4月, 2009 1 次提交
-
-
由 Grant Likely 提交于
This patch adds support for the Xilinx ll_temac 10/100/1000 Ethernet device. The ll_temac ipcore is typically used on Xilinx Virtex and Spartan designs attached to either a PowerPC 4xx or Microblaze processor. At the present moment, this driver only works with Virtex5 PowerPC designs because it assumes DCR is used to access the DMA registers. However, the low level access to DMA registers is abstracted and it should be easy to adapt for the other implementations. I'm posting this driver now as an RFC. There are still some things that need to be tightened up, but it does appear to be stable. Derived from driver code written by Yoshio Kashiwagi and David H. Lynch Jr. Tested on Xilinx ML507 eval board with Base System Builder generated FPGA design. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2009 1 次提交
-
-
由 Marcin Slusarz 提交于
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 4月, 2009 2 次提交
-
-
由 Alexander Duyck 提交于
This adds an igbvf driver to handle virtual functions provided by the igb driver when SR-IOV has been enabled. A virtual function is a lightweight pci-e function that supports a single queue and shares resources with the 82576 physical function contained within the igb driver. To spawn virtual functions from the igb driver all that is needed is to enable CONFIG_PCI_IOV and have an 82576 Ethernet adapter on a system that supports SR-IOV in the BIOS. The virtual functions will appear after the interface is loaded. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
ethoc indirectly uses crc32_le() and bitrev32(), so select those library functions to be built. drivers/built-in.o: In function `ethoc_set_multicast_list': ethoc.c:(.text+0x6226f): undefined reference to `crc32_le' ethoc.c:(.text+0x62276): undefined reference to `bitrev32' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2009 1 次提交
-
-
由 Michael Chan 提交于
Based on original patch by Ben Hutchings <ben@decadent.org.uk> and Bastian Blank <waldi@debian.org>, with the following main changes: Separated the mips firmware and rv2p firmware into different files to make it easier to update them separately. Added some code to fixup the rv2p code with run-time information such as PAGE_SIZE. Update version to 2.0.0. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2009 1 次提交
-
-
由 Ramkrishna Vepa 提交于
- Kconfig and Makefile related changes for vxge driver. - No changes in current submission. - Changes from previous submission - - Incorporated the following review comments as per Bill Flink: - Add dependancy on INET along with PCI - Remove dependancy on INET_LRO and add GRO support. - Made this patch as last patch as per Ben Hutchings comments. Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2009 1 次提交
-
-
由 Heiko Carstens 提交于
Let driver depend on HAS_IOMEM to avoid build breakage on s390: CC drivers/net/ethoc.o drivers/net/ethoc.c: In function 'ethoc_read': drivers/net/ethoc.c:221: error: implicit declaration of function 'ioread32' drivers/net/ethoc.c: In function 'ethoc_write': drivers/net/ethoc.c:226: error: implicit declaration of function 'iowrite32' drivers/net/ethoc.c: In function 'ethoc_rx': drivers/net/ethoc.c:405: error: implicit declaration of function 'memcpy_fromio' drivers/net/ethoc.c: In function 'ethoc_start_xmit': drivers/net/ethoc.c:828: error: implicit declaration of function 'memcpy_toio' Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2009 1 次提交
-
-
由 Thierry Reding 提交于
This patch adds a platform device driver that supports the OpenCores 10/100 Mbps Ethernet MAC. The driver expects three resources: one IORESOURCE_MEM resource defines the memory region for the core's memory-mapped registers while a second IORESOURCE_MEM resource defines the network packet buffer space. The third resource, of type IORESOURCE_IRQ, associates an interrupt with the driver. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2009 2 次提交
-
-
由 Stephen Hemminger 提交于
Now that most network device drivers in (all but one in x86_64 allmodconfig) support net_device_ops. Expose it as a configuration parameter. Still need to address even older 32 bit drivers, and other arch before compatiablity can be scheduled for removal in some future release. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilya Yanok 提交于
Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2009 2 次提交
-
-
由 Sathya Perla 提交于
Signed-off-by: NSathya Perla <sathyap@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilya Yanok 提交于
Driver for Dave DNET ethernet controller found on Dave/DENX QongEVB-LITE FPGA. Heavily based on Dave sources, I've just adopted it to current kernel version and done some code cleanup. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2009 1 次提交
-
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2009 2 次提交
-
-
由 Jeff Kirsher 提交于
To match ixgbe GRO functionality, we remove the LRO (which is now GRO) Kconfig option which enables GRO by default. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jie Yang 提交于
Supporting AR8131, and AR8132. Signed-off-by: NJie Yang <jie.yang@atheros.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2009 1 次提交
-
-
由 Lennert Buytenhek 提交于
Controlled by a compile-time (Kconfig) option for now, since it isn't a win in all cases. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2009 1 次提交
-
-
由 Andy Fleming 提交于
The MDIO bus drivers for the UCC and gianfar ethernet controllers are essentially the same. There's no reason to duplicate that much code. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2009 1 次提交
-
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2009 1 次提交
-
-
由 Matt Waddel 提交于
Signed-off-by: NMatt Waddel <Matt.Waddel@freescale.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 22 1月, 2009 3 次提交
-
-
由 Herbert Xu 提交于
This patch makes cxgb3 invoke the GRO hooks instead of LRO. As GRO has a compatible external interface to LRO this is a very straightforward replacement. I've kept the ioctl controls for per-queue LRO switches. However, we should not encourage anyone to use these. Because of that, I've also kept the skb construction code in cxgb3. Hopefully we can phase out those per-queue switches and then kill this too. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch makes igb invoke the GRO hooks instead of LRO. As GRO has a compatible external interface to LRO this is a very straightforward replacement. Three things of note: 1) I've kept the LRO Kconfig option until we decide to enable GRO across the board at which point it can also be killed. 2) The poll_controller stuff is broken in igb as it tries to do the same work as the normal poll routine. Since poll_controller can be called in the middle of a poll, this can't be good. I noticed this because poll_controller can invoke the GRO hooks without flushing held GRO packets. However, this should be harmless (assuming the poll_controller bug above doesn't kill you first :) since the next ->poll will clear the backlog. The only time when we'll have a problem is if we're already executing the GRO code on the same ring, but that's no worse than what happens now. 3) I kept the ip_summed check before calling GRO so that we're on par with previous behaviour. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch makes ixgbe invoke the GRO hooks instead of LRO. As GRO has a compatible external interface to LRO this is a very straightforward replacement. As GRO uses the napi structure to track the held packets, I've modified the code paths involved to pass that along. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2009 1 次提交
-
-
由 Florian Fainelli 提交于
We do not depend on EXPERIMENTAL and the driver is not experimental, so remove this warning. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2009 1 次提交
-
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2009 1 次提交
-
-
由 Inaky Perez-Gonzalez 提交于
Integrate the i2400m driver into the kernel's build and Kconfig. Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 31 12月, 2008 1 次提交
-
-
由 James Bottomley 提交于
cxgb3i requires the cxgb3 net driver, so it selects it. However, cxgb3 has dependencies which the select cannot see. Fix this by separating out the cxgb3 dependencies into a separate hidden config option (CONFIG_CHELSIO_T3_DEPENDS) and make both cxgb3 and cxgb3i depend on it. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Karen Xie <kxie@chelsio.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 28 12月, 2008 1 次提交
-
-
由 Dave Jones 提交于
I noticed it isn't possible to build token ring & fddi drivers without causing LLC, and a bunch of other things to be forced built-in. For distro kernels, this means carrying a chunk of code in the vmlinuz, even if the user doesn't use those protocols. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2008 1 次提交
-
-
由 Anton Vorontsov 提交于
The code appears to be dead: nobody call these functions, plus build breaks when UGETH_FILTERING is enabled: ucc_geth.c:1848: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c:1848: warning: its scope is only this definition or declaration, which is probably not what you want ucc_geth.c: In function 'ugeth_82xx_filtering_get_match_addr_in_hash': ucc_geth.c:1856: error: dereferencing pointer to incomplete type ucc_geth.c:1874: error: dereferencing pointer to incomplete type ucc_geth.c:1877: warning: return from incompatible pointer type ucc_geth.c: At top level: ucc_geth.c:1885: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c: In function 'ugeth_82xx_filtering_add_addr_in_hash': ucc_geth.c:1894: error: dereferencing pointer to incomplete type ucc_geth.c:1909: warning: passing argument 2 of 'ugeth_82xx_filtering_get_match_addr_in_hash' from incompatible pointer type ucc_geth.c:1909: warning: assignment from incompatible pointer type ucc_geth.c:1918: error: dereferencing pointer to incomplete type ucc_geth.c: At top level: ucc_geth.c:1928: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c: In function 'ugeth_82xx_filtering_clear_addr_in_hash': ucc_geth.c:1947: warning: passing argument 2 of 'ugeth_82xx_filtering_get_match_addr_in_hash' from incompatible pointer type ucc_geth.c:1947: warning: assignment from incompatible pointer type ucc_geth.c:1954: error: dereferencing pointer to incomplete type ucc_geth.c: At top level: ucc_geth.c:2060: warning: 'struct enet_addr' declared inside parameter list ucc_geth.c: In function 'ugeth_82xx_filtering_add_addr_in_paddr': ucc_geth.c:2064: error: dereferencing pointer to incomplete type ucc_geth.c:2073: error: dereferencing pointer to incomplete type ucc_geth.c:2075: warning: passing argument 2 of 'hw_add_addr_in_paddr' from incompatible pointer type make[2]: *** [ucc_geth.o] Error 1 The code is there since the driver was merged, and nobody seem to be interested in fixing or actually using it. If we ever want the filtering support, we can always revert the patch and fix it, but so far it just draws reader's attention. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2008 1 次提交
-
-
由 Steve Glendinning 提交于
This patch adds a driver for the LAN9240 PCI ethernet adapter. Changes since initial submission: - debug msg_level has been changed to use standard definitions - convert to use net_device_ops Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 11月, 2008 1 次提交
-
-
由 Jeff Kirsher 提交于
Since the netlink option for DCB is necessary to actually be useful, simplified the Kconfig option. In addition, added useful help text for the Kconfig option. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 11月, 2008 1 次提交
-
-
由 Alexander Duyck 提交于
This adds support for Data Center Bridging (DCB) features in the ixgbe driver and adds an rtnetlink interface for configuring DCB to the kernel. The DCB feature support included are Priority Grouping (PG) - which allows bandwidth guarantees to be allocated to groups to traffic based on the 802.1q priority, and Priority Based Flow Control (PFC) - which introduces a new MAC control PAUSE frame which works at granularity of the 802.1p priority instead of the link (IEEE 802.3x). Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2008 1 次提交
-
-
由 Alexander Duyck 提交于
This patch adds the 82576 device to the description for igb in Kconfig. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2008 1 次提交
-
-
由 Grant Likely 提交于
Without this patch it is possible to select drivers which require bestcomm support without bestcomm support being selected. This patch reworks the bestcomm dependencies to ensure the correct bestcomm tasks are always enabled. Reported-by: NHans Lehmann <hans.lehmann@ritter-elektronik.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 06 11月, 2008 2 次提交
-
-
由 Steve Glendinning 提交于
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it. Dustin McIntire (the author of the smc911x driver) has expressed his support for switching to this driver. This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures. This driver now uses phylib, so this patch also adds support for the device's internal phy Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NBahadir Balban <Bahadir.Balban@arm.com> Signed-off-by: NDustin Mcintire <dustin@sensoria.com> Signed-off-by: NBill Gatliff <bgat@billgatliff.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Brian Haley 提交于
This patch adds better IPv6 failover support for bonding devices, especially when in active-backup mode and there are only IPv6 addresses configured, as reported by Alex Sidorenko. - Creates a new file, net/drivers/bonding/bond_ipv6.c, for the IPv6-specific routines. Both regular bonds and VLANs over bonds are supported. - Adds a new tunable, num_unsol_na, to limit the number of unsolicited IPv6 Neighbor Advertisements that are sent on a failover event. Default is 1. - Creates two new IPv6 neighbor discovery functions: ndisc_build_skb() ndisc_send_skb() These were required to support VLANs since we have to be able to add the VLAN id to the skb since ndisc_send_na() and friends shouldn't be asked to do this. These two routines are basically __ndisc_send() split into two pieces, in a slightly different order. - Updates Documentation/networking/bonding.txt and bumps the rev of bond support to 3.4.0. On failover, this new code will generate one packet: - An unsolicited IPv6 Neighbor Advertisement, which helps the switch learn that the address has moved to the new slave. Testing has shown that sending just the NA results in pretty good behavior when in active-back mode, I saw no lost ping packets for example. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 04 11月, 2008 1 次提交
-
-
由 Jeff Kirsher 提交于
The bool kconfig option added to ixgbe and myri10ge for DCA is ambigous, so this patch adds a description to the kconfig option. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 31 10月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 10月, 2008 1 次提交
-
-
由 Yevgeny Petrilin 提交于
The Mellanox ConnectX can operate as an InfiniBand adapter, as an Ethernet NIC, or as a Fibre Channel (FC) HBA. The kernel has a low-level driver, mlx4_core, which handles multiplexing access to the device, and there is also already an InfiniBad driver, mlx4_ib. This patch adds a new driver, mlx4_en, which implements a standard Ethernet NIC driver. Signed-off-by: NLiran Liss <liranl@mellanox.co.il> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 22 10月, 2008 2 次提交
-
-
由 Catalin Marinas 提交于
Since more ARM platforms use this device, it is easier to add a dependency on ARM rather than individual platforms. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Add a bool IGB_DCA defined to y if IGB and DCA are enabled, but IGB isn't y while DCA=m. And thus remove the need to select INTEL_IOATDMA when IGB is enabled, so that non-x86 architectures can build the igb driver. Based on work/patch from Brice Goglin <brice@myri.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-