- 26 5月, 2016 2 次提交
-
-
由 Sudarsana Reddy Kalluru 提交于
This patch fixes the coding error in determining the enable flag for the application/protocol. The enable flag should be set for all protocols but the eth. Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vidya Sagar Ravipati 提交于
This patch enhances ethtool link mode bitmap to include 25G/50G/100G speed along with interface modes Signed-off-by: NVidya Sagar Ravipati <vidya@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2016 5 次提交
-
-
由 Jamal Hadi Salim 提交于
Policer was not dumping or updating timestamps Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I found a serious performance bug in packet schedulers using hrtimers. sch_htb and sch_fq are definitely impacted by this problem. We constantly rearm high resolution timers if some packets are throttled in one (or more) class, and other packets are flying through qdisc on another (non throttled) class. hrtimer_start() does not have the mod_timer() trick of doing nothing if expires value does not change : if (timer_pending(timer) && timer->expires == expires) return 1; This issue is particularly visible when multiple cpus can queue/dequeue packets on the same qdisc, as hrtimer code has to lock a remote base. I used following fix : 1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding it. 2) Cache watchdog prior expiration. hrtimer might provide this, but I prefer to not rely on some hrtimer internal. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gavin Shan 提交于
One timer, whose handler keeps reading on MMIO register for EEH core to detect error in time, is started when the PCI device driver is loaded. MMIO register can't be accessed during PE reset in EEH recovery. Otherwise, the unexpected recursive error is triggered. The timer isn't closed that time if the interface isn't brought up. So the unexpected recursive error is seen during EEH recovery when the interface is down. This avoids the unexpected recursive EEH error by closing the timer in qlge_io_error_detected() before EEH PE reset unconditionally. The timer is started unconditionally after EEH PE reset in qlge_io_resume(). Also, the timer should be closed unconditionally when the device is removed from the system permanently in qlge_io_error_detected(). Reported-by: NShriya R. Kulkarni <shriyakul@in.ibm.com> Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haishuang Yan 提交于
In gre6 xmit path, we are sending a GRE packet, so set fl6 proto to IPPROTO_GRE properly. Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haishuang Yan 提交于
When creat an ip6gretap interface with an unreachable route, the MTU is about 14 bytes larger than what was needed. If the remote address is reachable: ping6 2001:0:130::1 -c 2 PING 2001:0:130::1(2001:0:130::1) 56 data bytes 64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms 64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 5月, 2016 8 次提交
-
-
由 Dan Carpenter 提交于
"priority" needs to be signed for the error handling to work. Fixes: 39651abd ('qed: add support for dcbx.') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Follow-up to commit e27f4a94 ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), which removes the FS_USERNS_MOUNT flag. The original idea was to have a per mountns instance instead of a single global fs instance, but that didn't work out and we had to switch to mount_nodev() model. The intent of that middle ground was that we avoid users who don't play nice to create endless instances of bpf fs which are difficult to control and discover from an admin point of view, but at the same time it would have allowed us to be more flexible with regard to namespaces. Therefore, since we now did the switch to mount_nodev() as a fix where individual instances are created, we also need to remove userns mount flag along with it to avoid running into mentioned situation. I don't expect any breakage at this early point in time with removing the flag and we can revisit this later should the requirement for this come up with future users. This and commit e27f4a94 have been split to facilitate tracking should any of them run into the unlikely case of causing a regression. Fixes: b2197755 ("bpf: add support for persistent maps/progs") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ezequiel Garcia 提交于
Commit fa50d974 ("ipv4: Namespaceify ip_default_ttl sysctl knob") moves the default TTL assignment, and as side-effect IPv4 TTL now has a default value only if sysctl support is enabled (CONFIG_SYSCTL=y). The sysctl_ip_default_ttl is fundamental for IP to work properly, as it provides the TTL to be used as default. The defautl TTL may be used in ip_selected_ttl, through the following flow: ip_select_ttl ip4_dst_hoplimit net->ipv4.sysctl_ip_default_ttl This commit fixes the issue by assigning net->ipv4.sysctl_ip_default_ttl in net_init_net, called during ipv4's initialization. Without this commit, a kernel built without sysctl support will send all IP packets with zero TTL (unless a TTL is explicitly set, e.g. with setsockopt). Given a similar issue might appear on the other knobs that were namespaceify, this commit also moves them. Fixes: fa50d974 ("ipv4: Namespaceify ip_default_ttl sysctl knob") Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Muhammad Falak R Wani 提交于
Use memdup_user to duplicate a memory region from user-space to kernel-space, instead of open coding using kmalloc & copy_from_user. Signed-off-by: NMuhammad Falak R Wani <falakreyaz@gmail.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 xypron.glpk@gmx.de 提交于
In the statement assert(priv || priv->ae_handle); the right side of || is only evaluated if priv is null. v2: As suggested by David Leight and David Miller the assert statements are removed. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
The sk_err and sk_err_soft fields are positive errno values and userspace applications rely on this when using getsockopt(SO_ERROR). ATM code places an -errno into sk_err_soft in sigd_send() and returns it from svc_addparty()/svc_dropparty(). Although I am not familiar with ATM code I came to this conclusion because: 1. sigd_send() msg->type cases as_okay and as_error both have: sk->sk_err = -msg->reply; while the as_addparty and as_dropparty cases have: sk->sk_err_soft = msg->reply; This is the source of the inconsistency. 2. svc_addparty() returns an -errno and assumes sk_err_soft is also an -errno: if (flags & O_NONBLOCK) { error = -EINPROGRESS; goto out; } ... error = xchg(&sk->sk_err_soft, 0); out: release_sock(sk); return error; This shows that sk_err_soft is indeed being treated as an -errno. This patch ensures that sk_err_soft is always a positive errno. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 xypron.glpk@gmx.de 提交于
If !count is true, count < 4 is also true. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2016 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull motr tracing updates from Steven Rostedt: "Three more changes. - I forgot that I had another selftest to stress test the ftrace instance creation. It was actually suppose to go into the 4.6 merge window, but I never committed it. I almost forgot about it again, but noticed it was missing from your tree. - Soumya PN sent me a clean up patch to not disable interrupts when taking the tasklist_lock for read, as it's unnecessary because that lock is never taken for write in irq context. - Newer gcc's can cause the jump in the function_graph code to the global ftrace_stub label to be a short jump instead of a long one. As that jump is dynamically converted to jump to the trace code to do function graph tracing, and that conversion expects a long jump it can corrupt the ftrace_stub itself (it's directly after that call). One way to prevent gcc from using a short jump is to declare the ftrace_stub as a weak function, which we do here to keep gcc from optimizing too much" * tag 'trace-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/x86: Set ftrace_stub to weak to prevent gcc from using short jumps to it ftrace: Don't disable irqs when taking the tasklist_lock read_lock ftracetest: Add instance created, delete, read and enable event test
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu update from Greg Ungerer: "Only a single change to update my email address in the MAINTAINERS file" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: change m68knommu maintainer email address
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: "Some 32-bit kgdb cleanups from Sam Ravnborg, and a hugepage TLB flush overhead fix on 64-bit from Nitin Gupta" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Reduce TLB flushes during hugepte changes aeroflex/greth: fix warning about unused variable openprom: fix warning sparc32: drop superfluous cast in calls to __nocache_pa() sparc32: fix build with STRICT_MM_TYPECHECKS sparc32: use proper prototype for trapbase sparc32: drop local prototype in kgdb_32 sparc32: drop hardcoding trap_level in kgdb_trap
-
由 Linus Torvalds 提交于
I'm looking at trying to possibly merge the 32-bit and 64-bit versions of the x86 uaccess.h implementation, but first this needs to be cleaned up. For example, the 32-bit version of "__copy_from_user_inatomic()" is mostly the special cases for the constant size, and it's actually almost never relevant. Most users aren't actually using a constant size anyway, and the few cases that do small constant copies are better off just using __get_user() instead. So get rid of the unnecessary complexity. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
I'm looking at trying to possibly merge the 32-bit and 64-bit versions of the x86 uaccess.h implementation, but first this needs to be cleaned up. For example, the 32-bit version of "__copy_to_user_inatomic()" is mostly the special cases for the constant size, and it's actually never relevant. Every user except for one aren't actually using a constant size anyway, and the one user that uses it is better off just using __put_user() instead. So get rid of the unnecessary complexity. [ The same cleanup should likely happen to __copy_from_user_inatomic() as well, but that one has a lot more users that I need to take a look at first ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 5月, 2016 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs由 Linus Torvalds 提交于
Pull f2fs updates from Jaegeuk Kim: "In this round, as Ted pointed out, fscrypto allows one more key prefix given by filesystem to resolve backward compatibility issues. Other than that, we've fixed several error handling cases by introducing a fault injection facility. We've also achieved performance improvement in some workloads as well as a bunch of bug fixes. Summary: Enhancements: - fs-specific prefix for fscrypto - fault injection facility - expose validity bitmaps for user to be aware of fragmentation - fallocate/rm/preallocation speed up - use percpu counters Bug fixes: - some inline_dentry/inline_data bugs - error handling for atomic/volatile/orphan inodes - recover broken superblock" * tag 'for-f2fs-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (73 commits) f2fs: fix to update dirty page count correctly f2fs: flush pending bios right away when error occurs f2fs: avoid ENOSPC fault in the recovery process f2fs: make exit_f2fs_fs more clear f2fs: use percpu_counter for total_valid_inode_count f2fs: use percpu_counter for alloc_valid_block_count f2fs: use percpu_counter for # of dirty pages in inode f2fs: use percpu_counter for page counters f2fs: use bio count instead of F2FS_WRITEBACK page count f2fs: manipulate dirty file inodes when DATA_FLUSH is set f2fs: add fault injection to sysfs f2fs: no need inc dirty pages under inode lock f2fs: fix incorrect error path handling in f2fs_move_rehashed_dirents f2fs: fix i_current_depth during inline dentry conversion f2fs: correct return value type of f2fs_fill_super f2fs: fix deadlock when flush inline data f2fs: avoid f2fs_bug_on during recovery f2fs: show # of orphan inodes f2fs: support in batch fzero in dnode page f2fs: support in batch multi blocks preallocation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs updates from Chris Mason: "This has our merge window series of cleanups and fixes. These target a wide range of issues, but do include some important fixes for qgroups, O_DIRECT, and fsync handling. Jeff Mahoney moved around a few definitions to make them easier for userland to consume. Also whiteout support is included now that issues with overlayfs have been cleared up. I have one more fix pending for page faults during btrfs_copy_from_user, but I wanted to get this bulk out the door first" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (90 commits) btrfs: fix memory leak during RAID 5/6 device replacement Btrfs: add semaphore to synchronize direct IO writes with fsync Btrfs: fix race between block group relocation and nocow writes Btrfs: fix race between fsync and direct IO writes for prealloc extents Btrfs: fix number of transaction units for renames with whiteout Btrfs: pin logs earlier when doing a rename exchange operation Btrfs: unpin logs if rename exchange operation fails Btrfs: fix inode leak on failure to setup whiteout inode in rename btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT Btrfs: pin log earlier when renaming Btrfs: unpin log if rename operation fails Btrfs: don't do unnecessary delalloc flushes when relocating Btrfs: don't wait for unrelated IO to finish before relocation Btrfs: fix empty symlink after creating symlink and fsync parent dir Btrfs: fix for incorrect directory entries after fsync log replay btrfs: build fixup for qgroup_account_snapshot btrfs: qgroup: Fix qgroup accounting when creating snapshot Btrfs: fix fspath error deallocation btrfs: make find_workspace warn if there are no workspaces btrfs: make find_workspace always succeed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC updates from Alexandre Belloni: "Subsystem wide cleanups: - Use IS_ENABLED() instead of checking for built-in or module - remove useless DRV_VERSION - remove CLK_IS_ROOT - remove UIE signaling Drivers: - ds1302: rewritten to be a proper SPI device driver - m41t80: huge cleanup, alarm, wakelarm ans oscialltor failure detection support - rv3029: switch to regmap to handle rv3049, alarm support, fixes - zynqmp: enable switching to battery power, fixes - small fixes for at91sam9, da9053, ds1307, ds1685, ds3232, r2025, sa1100, snvs, stmp3xxx, tps6586x" * tag 'rtc-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: tps6586x: rename so module can be autoloaded rtc: rv3029: hide unused i2c device table rtc: rs5c372: r2025: fix check for 'oscillator halted' condition rtc: rv3029: add alarm IRQ rtc: rv3029: fix set_time function rtc: rv3029: fix alarm support rtc: rv3029: Remove some checks and warnings rtc: rv3029: Add support of RV3049 rtc: rv3029: convert to use regmap rtc: rv3029: remove 'i2c' in functions names rtc: stmp3xxx: print message on error rtc: Use IS_ENABLED() instead of checking for built-in or module rtc: ds3232: fix call trace when rtc->ops_lock is used as NULL rtc: snvs: return error in case enable_irq_wake fails rtc: zynqmp: Update seconds time programming logic rtc: sa1100: DT spelling s/interrupt-name/interrupt-names/ rtc: mc13xxx: remove UIE signaling rtc: mxc: remove UIE signaling rtc: ds1307: Remove CLK_IS_ROOT rtc: hym8563: Remove CLK_IS_ROOT ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox updates from Jassi Brar: "OMAP: - Remove non-DT support from mailbox driver - Move PM from client calls to native driver suspend/resume - Trivial cleanups to make checkpatch happy STI: - Check return from devm_ioremap_resource as ERR_PTR, not NULL" * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix devm_ioremap_resource error detection code mailbox/omap: kill omap_mbox_{save/restore}_ctx() functions mailbox/omap: check for any unread messages during suspend mailbox/omap: add support for suspend/resume mailbox/omap: store mailbox interrupt type in omap_mbox_device mailbox/omap: add blank lines after declarations mailbox/omap: remove FSF mailing address paragraph mailbox/omap: use variable name for sizeof() operator mailbox/omap: drop legacy platform device support
-
由 Linus Torvalds 提交于
Commit b3c1be1b ("base: isa: Remove X86_32 dependency") made ISA support available on x86-64 too. That's not right - while there are some LPC-style devices that might be useful still and be based on ISA-like IP blocks, that is *not* an excuse to try to enable any random legacy drivers. Such drivers should be individually enabled and made to perhaps depend on ISA_DMA_API instead (which we have continued to support on x86-64). Or we could add another "ISA_XYZ_API" that we support that doesn't enable random old drivers that aren't even 64-bit clean nor do we have any test coverage for. Turning off ISA will now also turn off some drivers that have been marked as depending on it as part of this series, and that used to work on modern platforms. See for example commits ad7afc38..cc736607, which may also need to be reverted. This commit means that the warnings that came in due to enabling ISA widely are now gone again. Acked-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 5月, 2016 15 次提交
-
-
由 Nicolas Chauvet 提交于
This module is loaded by the related mfd driver which has the needed MODULE_DEVICE_TABLE(i2c,...). This patch fix the modalias when the rtc driver is built as a module, so the right name is used. Everything operates correctly when this module is builtin. Fixes: esdc59ed38 ("rtc: add RTC driver for TPS6586x") Signed-off-by: NNicolas Chauvet <kwizart@gmail.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Arnd Bergmann 提交于
The added support for SPI mode made it possible to configure the driver when I2C is disabled, leaving an unused device table: drivers/rtc/rtc-rv3029c2.c:794:29: error: 'rv3029_id' defined but not used [-Werror=unused-variable] This moves the table inside of the #ifdef section that has the only user, to avoid the harmless warning. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: d08f50dd0afc ("rtc: rv3029: Add support of RV3049") Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Thomas Koeller 提交于
The R2025SD chip, according to its data sheet, sets the /XST bit to zero if the oscillator stops. Hence the check for this condition was wrong. Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
Add the alarm IRQ functionality. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
The bin2bcd function in set_time is uncorrect on weekdays as the bit mask should be done at the end of arithmetic operations. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
The RTC RV3029 handles different types of alarms : seconds, minutes, ... These alarms can be enabled or disabled individually using an AE_x bit which is the last bit (BIT(7)) on each alarm registers. To prepare the alarm IRQ support, the current code enables all the alarm types by setting each AE_x to 1. It also fixes others alarms issues : - month and weekday errors : it was performing -1 instead of +1. - wrong use of bit mask with bin2bcd Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
Remove some checks from checkpatch such as spaces around arithmetic operations or prefer "unsigned int". Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
Add support of Microcrystal RV3049 RTC (SPI) using regmap on the RV3029 (I2C) driver. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
To add support of rv3049, the current driver is converted to use regmap. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Mylène Josserand 提交于
To prepare the use of regmap to add the support of RV-3049, all the 'i2c' in functions's names are removed. Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Linus Torvalds 提交于
Merge more updates from Andrew Morton: - the rest of MM - KASAN updates - procfs updates - exit, fork updates - printk updates - lib/ updates - radix-tree testsuite updates - checkpatch updates - kprobes updates - a few other misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) samples/kprobes: print out the symbol name for the hooks samples/kprobes: add a new module parameter kprobes: add the "tls" argument for j_do_fork init/main.c: simplify initcall_blacklisted() fs/efs/super.c: fix return value checkpatch: improve --git <commit-count> shortcut checkpatch: reduce number of `git log` calls with --git checkpatch: add support to check already applied git commits checkpatch: add --list-types to show message types to show or ignore checkpatch: advertise the --fix and --fix-inplace options more checkpatch: whine about ACCESS_ONCE checkpatch: add test for keywords not starting on tabstops checkpatch: improve CONSTANT_COMPARISON test for structure members checkpatch: add PREFER_IS_ENABLED test lib/GCD.c: use binary GCD algorithm instead of Euclidean radix-tree: free up the bottom bit of exceptional entries for reuse dax: move RADIX_DAX_ definitions to dax.c radix-tree: make radix_tree_descend() more useful radix-tree: introduce radix_tree_replace_clear_tags() radix-tree: tidy up __radix_tree_create() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO driver updates from Greg KH: "Here's the big staging and iio driver update for 4.7-rc1. I think we almost broke even with this release, only adding a few more lines than we removed, which isn't bad overall given that there's a bunch of new iio drivers added. The Lustre developers seem to have woken up from their sleep and have been doing a great job in cleaning up the code and pruning unused or old cruft, the filesystem is almost readable :) Other than that, just a lot of basic coding style cleanups in the churn. All have been in linux-next for a while with no reported issues" * tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (938 commits) Staging: emxx_udc: emxx_udc: fixed coding style issue staging/gdm724x: fix "alignment should match open parenthesis" issues staging/gdm724x: Fix avoid CamelCase staging: unisys: rename misleading var ii with frag staging: unisys: visorhba: switch success handling to error handling staging: unisys: visorhba: main path needs to flow down the left margin staging: unisys: visorinput: handle_locking_key() simplifications staging: unisys: visorhba: fail gracefully for thread creation failures staging: unisys: visornic: comment restructuring and removing bad diction staging: unisys: fix format string %Lx to %llx for u64 staging: unisys: remove unused struct members staging: unisys: visorchannel: correct variable misspelling staging: unisys: visorhba: replace functionlike macro with function staging: dgnc: Need to check for NULL of ch staging: dgnc: remove redundant condition check staging: dgnc: fix 'line over 80 characters' staging: dgnc: clean up the dgnc_get_modem_info() staging: lustre: lnet: enable configuration per NI interface staging: lustre: o2iblnd: properly set ibr_why staging: lustre: o2iblnd: remove last of kiblnd_tunables_fini ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core updates from Greg KH: "Here's the "big" driver core update for 4.7-rc1. Mostly just debugfs changes, the long-known and messy races with removing debugfs files should be fixed thanks to the great work of Nicolai Stange. We also have some isa updates in here (the x86 maintainers told me to take it through this tree), a new warning when we run out of dynamic char major numbers, and a few other assorted changes, details in the shortlog. All have been in linux-next for some time with no reported issues" * tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case" gpio: ws16c48: Utilize the ISA bus driver gpio: 104-idio-16: Utilize the ISA bus driver gpio: 104-idi-48: Utilize the ISA bus driver gpio: 104-dio-48e: Utilize the ISA bus driver watchdog: ebc-c384_wdt: Utilize the ISA bus driver iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros iio: stx104: Add X86 dependency to STX104 Kconfig option Documentation: Add ISA bus driver documentation isa: Implement the max_num_isa_dev macro isa: Implement the module_isa_driver macro pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS isa: Decouple X86_32 dependency from the ISA Kconfig option driver-core: use 'dev' argument in dev_dbg_ratelimited stub base: dd: don't remove driver_data in -EPROBE_DEFER case kernfs: Move faulting copy_user operations outside of the mutex devcoredump: add scatterlist support debugfs: unproxify files created through debugfs_create_u32_array() debugfs: unproxify files created through debugfs_create_blob() debugfs: unproxify files created through debugfs_create_bool() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char / misc driver updates from Greg KH: "Here's the big char and misc driver update for 4.7-rc1. Lots of different tiny driver subsystems have updates here with new drivers and functionality. Details in the shortlog. All have been in linux-next with no reported issues for a while" * tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits) mcb: Delete num_cells variable which is not required mcb: Fixed bar number assignment for the gdd mcb: Replace ioremap and request_region with the devm version mcb: Implement bus->dev.release callback mcb: export bus information via sysfs mcb: Correctly initialize the bus's device mei: bus: call mei_cl_read_start under device lock coresight: etb10: adjust read pointer only when needed coresight: configuring ETF in FIFO mode when acting as link coresight: tmc: implementing TMC-ETF AUX space API coresight: moving struct cs_buffers to header file coresight: tmc: keep track of memory width coresight: tmc: make sysFS and Perf mode mutually exclusive coresight: tmc: dump system memory content only when needed coresight: tmc: adding mode of operation for link/sinks coresight: tmc: getting rid of multiple read access coresight: tmc: allocating memory when needed coresight: tmc: making prepare/unprepare functions generic coresight: tmc: splitting driver in ETB/ETF and ETR components coresight: tmc: cleaning up header file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB updates from Greg KH: "Here's the big pull request for USB and PHY drivers for 4.7-rc1 Full details in the shortlog, but it's the normal major gadget driver updates, phy updates, new usbip code, as well as a bit of lots of other stuff. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits) USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support USB: serial: fix minor-number allocation USB: serial: quatech2: fix use-after-free in probe error path USB: serial: mxuport: fix use-after-free in probe error path USB: serial: keyspan: fix debug and error messages USB: serial: keyspan: fix URB unlink USB: serial: keyspan: fix use-after-free in probe error path USB: serial: io_edgeport: fix memory leaks in probe error path USB: serial: io_edgeport: fix memory leaks in attach error path usb: Remove unnecessary space before operator ','. usb: Remove unnecessary space before open square bracket. USB: FHCI: avoid redundant condition usb: host: xhci-rcar: Avoid long wait in xhci_reset() usb/host/fotg210: remove dead code in create_sysfs_files usb: wusbcore: Do not initialise statics to 0. usb: wusbcore: Remove space before ',' and '(' . USB: serial: cp210x: clean up CRTSCTS flag code USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code USB: serial: cp210x: fix hardware flow-control disable USB: serial: option: add even more ZTE device ids ...
-