acpi_os_get_thread_id() is used only for debugging
code that is not enabled on Linux, so stub it out.
Signed-off-by: NLen Brown <len.brown@intel.com>

ia64 ioremap is now smart enough to use the correct memory attributes, so
remove the EFI checks from osl.c.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@muc.de>
Acked-by: N"Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Almost all users of the table addresses from the EFI system table want
physical addresses.  So rather than doing the pa->va->pa conversion, just keep
physical addresses in struct efi.

This fixes a DMI bug: the efi structure contained the physical SMBIOS address
on x86 but the virtual address on ia64, so dmi_scan_machine() used ioremap()
on a virtual address on ia64.

This is essentially the same as an earlier patch by Matt Tolentino:
	http://marc.theaimsgroup.com/?l=linux-kernel&m=112130292316281&w=2
except that this changes all table addresses, not just ACPI addresses.

Matt's original patch was backed out because it caused MCAs on HP sx1000
systems.  That problem is resolved by the ioremap() attribute checking added
for ia64.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@muc.de>
Acked-by: N"Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implemented support in the Resource Manager to allow
unresolved namestring references within resource package
objects for the _PRT method. This support is in addition
to the previously implemented unresolved reference
support within the AML parser. If the interpreter slack
mode is enabled (true on Linux unless acpi=strict),
these unresolved references will be passed through
to the caller as a NULL package entry.
http://bugzilla.kernel.org/show_bug.cgi?id=5741

Implemented and deployed new macros and functions for
error and warning messages across the subsystem. These
macros are simpler and generate less code than their
predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION,
ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_*
macros.

Implemented the acpi_cpu_flags type to simplify host OS
integration of the Acquire/Release Lock OSL interfaces.
Suggested by Steven Rostedt and Andrew Morton.

Fixed a problem where Alias ASL operators are sometimes
not correctly resolved. causing AE_AML_INTERNAL
http://bugzilla.kernel.org/show_bug.cgi?id=5189
http://bugzilla.kernel.org/show_bug.cgi?id=5674

Fixed several problems with the implementation of the
ConcatenateResTemplate ASL operator. As per the ACPI
specification, zero length buffers are now treated as a
single EndTag. One-length buffers always cause a fatal
exception. Non-zero length buffers that do not end with
a full 2-byte EndTag cause a fatal exception.

Fixed a possible structure overwrite in the
AcpiGetObjectInfo external interface. (With assistance
from Thomas Renninger)
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

According to the TCG specifications measurements or hashes of the BIOS code
and data are extended into TPM PCRS and a log is kept in an ACPI table of
these extensions for later validation if desired.  This patch exports the
values in the ACPI table through a security-fs seq_file.
Signed-off-by: NSeiji Munetoh <munetoh@jp.ibm.com>
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>
Signed-off-by: NReiner Sailer <sailer@us.ibm.com>
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Before this fix, the finite timeout case
behaved like the no-timeout (trylock) case.

http://bugzilla.kernel.org/show_bug.cgi?id=4588Signed-off-by: NLuming Yu <luming.yu@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

typecheck complains on i386 that u32 != unsigned long
Signed-off-by: NLen Brown <len.brown@intel.com>

Implemented support for the EM64T and other x86_64
processors. This essentially entails recognizing
that these processors support non-aligned memory
transfers. Previously, all 64-bit processors were assumed
to lack hardware support for non-aligned transfers.

Completed conversion of the Resource Manager to nearly
full table-driven operation. Specifically, the resource
conversion code (convert AML to internal format and the
reverse) and the debug code to dump internal resource
descriptors are fully table-driven, reducing code and data
size and improving maintainability.

The OSL interfaces for Acquire and Release Lock now use a
64-bit flag word on 64-bit processors instead of a fixed
32-bit word. (Alexey Starikovskiy)

Implemented support within the resource conversion code
for the Type-Specific byte within the various ACPI 3.0
*WordSpace macros.

Fixed some issues within the resource conversion code for
the type-specific flags for both Memory and I/O address
resource descriptors. For Memory, implemented support
for the MTP and TTP flags. For I/O, split the TRS and TTP
flags into two separate fields.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
msecs_to_jiffies() instead of direct HZ division to avoid rounding errors.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Delete the ability to build an ACPI kernel that does
not include PCI support.  When such a machine is created
and it requires a tuned kernel, send a patch.

http://bugzilla.kernel.org/show_bug.cgi?id=1364Signed-off-by: NLen Brown <len.brown@intel.com>

When both platform-specific and generic drivers exist,
enable generic over-ride with "acpi_generic_hotkey".

http://bugzilla.kernel.org/show_bug.cgi?id=4953Signed-off-by: NLuming Yu <luming.yu@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

ACPI now uses kmalloc(...,GPF_ATOMIC) during suspend/resume.

http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPICA 20050617:

Moved the object cache operations into the OS interface
layer (OSL) to allow the host OS to handle these operations
if desired (for example, the Linux OSL will invoke the
slab allocator).  This support is optional; the compile
time define ACPI_USE_LOCAL_CACHE may be used to utilize
the original cache code in the ACPI CA core.  The new OSL
interfaces are shown below.  See utalloc.c for an example
implementation, and acpiosxf.h for the exact interface
definitions.  Thanks to Alexey Starikovskiy.
	acpi_os_create_cache
	acpi_os_delete_cache
	acpi_os_purge_cache
	acpi_os_acquire_object
	acpi_os_release_object

Modified the interfaces to acpi_os_acquire_lock and
acpi_os_release_lock to return and restore a flags
parameter.  This fits better with many OS lock models.
Note: the current execution state (interrupt handler
or not) is no longer passed to these interfaces.  If
necessary, the OSL must determine this state by itself, a
simple and fast operation.  Thanks to Alexey Starikovskiy.

Fixed a problem in the ACPI table handling where a valid
XSDT was assumed present if the revision of the RSDP
was 2 or greater.  According to the ACPI specification,
the XSDT is optional in all cases, and the table manager
therefore now checks for both an RSDP >=2 and a valid
XSDT pointer.  Otherwise, the RSDT pointer is used.
Some ACPI 2.0 compliant BIOSs contain only the RSDT.

Fixed an interpreter problem with the Mid() operator in the
case of an input string where the resulting output string
is of zero length.  It now correctly returns a valid,
null terminated string object instead of a string object
with a null pointer.

Fixed a problem with the control method argument handling
to allow a store to an Arg object that already contains an
object of type Device.  The Device object is now correctly
overwritten.  Previously, an error was returned.

ACPICA 20050624:

Modified the new OSL cache interfaces to use ACPI_CACHE_T
as the type for the host-defined cache object.  This allows
the OSL implementation to define and type this object in
any manner desired, simplifying the OSL implementation.
For example, ACPI_CACHE_T is defined as kmem_cache_t for
Linux, and should be defined in the OS-specific header
file for other operating systems as required.

Changed the interface to AcpiOsAcquireObject to directly
return the requested object as the function return (instead
of ACPI_STATUS.) This change was made for performance
reasons, since this is the purpose of the interface in the
first place.  acpi_os_acquire_object is now similar to the
acpi_os_allocate interface.  Thanks to Alexey Starikovskiy.

Modified the initialization sequence in
acpi_initialize_subsystem to call the OSL interface
acpi_osl_initialize first, before any local initialization.
This change was required because the global initialization
now calls OSL interfaces.

Restructured the code base to split some files because
of size and/or because the code logically belonged in a
separate file.  New files are listed below.

  utilities/utcache.c	/* Local cache interfaces */
  utilities/utmutex.c	/* Local mutex support */
  utilities/utstate.c	/* State object support */
  parser/psloop.c	/* Main AML parse loop */
Signed-off-by: NLen Brown <len.brown@intel.com>

See Documentation/acpi-hotkey.txt

Use cmdline "acpi_specific_hotkey" to enable
legacy platform specific drivers.

http://bugzilla.kernel.org/show_bug.cgi?id=3887Signed-off-by: NLuming Yu <luming.yu@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!