- 05 2月, 2011 3 次提交
-
-
由 Pavan Savoy 提交于
The communication between ST KIM and UIM was interfaced over the /dev/rfkill device node. Move the interface to a simpler less abusive sysfs entry mechanism and document it in Documentation/ABI/testing/ under sysfs-platform-kim. Shared transport driver would now read the UART details originally received by bootloader or firmware as platform data. The data read will be shared over sysfs entries for the user-space UIM or other n/w manager/plugins to be read, and assist the driver by opening up the UART, setting the baud-rate and installing the line discipline. Signed-off-by: NPavan Savoy <pavan_savoy@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pavan Savoy 提交于
The architecture of shared transport had begun with individual protocols like bluetooth, fm and gps telling the shared transport what sort of protocol they are and then expecting the ST driver to parse the incoming data from chip and forward data only relevant to the protocol drivers. This change would mean each protocol drivers would also send information to ST driver as to how to intrepret their protocol data coming out of the chip. Signed-off-by: NPavan Savoy <pavan_savoy@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Harry Wei 提交于
When i see the file linux-2.6.37/Documentation/zh_CN/SubmittingPatches , i find a mistake Chinese character in it. So i give a patch for correcting this error. Signed-off-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 2月, 2011 19 次提交
-
-
由 Ferenc Wagner 提交于
Signed-off-by: NFerenc Wagner <wferi@niif.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ferenc Wagner 提交于
The original macro worked only when applied to variables named 'dev'. While this could have been fixed by simply renaming the macro argument, a more type-safe replacement by an inline function is preferred. Signed-off-by: NFerenc Wagner <wferi@niif.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathan Fontenot 提交于
As a follow-on to the recent patches I submitted that allowed for a sysfs memory block to span multiple memory sections, we should also update the probe routine to online all of the memory sections in a memory block. Without this patch the current code will only add a single memory section. I think the probe routine should add all of the memory sections in the specified memory block so that its behavior is in line with memory hotplug actions through the sysfs interfaces. This patch applies on top of the previous sysfs memory updates to allow a sysfs directory o span multiple memory sections. https://lkml.org/lkml/2011/1/20/245Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathan Fontenot 提交于
Define a version of memory_block_size_bytes for x86_64 when CONFIG_X86_UV is set. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathan Fontenot 提交于
Define a version of memory_block_size_bytes() for powerpc/pseries such that a memory block spans an entire lmb. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Reviewed-by: NRobin Holt <holt@sgi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathan Fontenot 提交于
Update the 'phys_index' property of a the memory_block struct to be called start_section_nr, and add a end_section_nr property. The data tracked here is the same but the updated naming is more in line with what is stored here, namely the first and last section number that the memory block spans. The names presented to userspace remain the same, phys_index for start_section_nr and end_phys_index for end_section_nr, to avoid breaking anything in userspace. This also updates the node sysfs code to be aware of the new capability for a memory block to contain multiple memory sections and be aware of the memory block structure name changes (start_section_nr). This requires an additional parameter to unregister_mem_sect_under_nodes so that we know which memory section of the memory block to unregister. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Reviewed-by: NRobin Holt <holt@sgi.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathan Fontenot 提交于
Update the memory sysfs code such that each sysfs memory directory is now considered a memory block that can span multiple memory sections per memory block. The default size of each memory block is SECTION_SIZE_BITS to maintain the current behavior of having a single memory section per memory block (i.e. one sysfs directory per memory section). For architectures that want to have memory blocks span multiple memory sections they need only define their own memory_block_size_bytes() routine. Update the memory hotplug documentation to reflect the new behaviors of memory blocks reflected in sysfs. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Reviewed-by: NRobin Holt <holt@sgi.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This fixes a build breakage caused by 8ba6ebf5 "Dynamic debug: Add more flags" Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomoya MORINAGA 提交于
Add ML7213 device information. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Harry Wei 提交于
Signed-off-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Borislav Petkov 提交于
When encountering an error while executing the driver's ->add method, we should cancel registration and unwind what we've regged so far. The low level ->add methods do return proper error codes but those aren't looked at in sysdev_driver_register(). Fix that by sharing the unregistering code. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Amerigo Wang 提交于
debugfs can't be a module, so module_exit() is meaningless for it. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Borislav Petkov 提交于
Use gcc's __func__ instead of the function name. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bob Liu 提交于
Some place in firmware_class.c using "int uevent" define, but others use "bool uevent". This patch replace all int uevent define to bool. Signed-off-by: NBob Liu <lliubbo@gmail.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bart Van Assche 提交于
Add flags that allow the user to specify via debugfs whether or not the module name, function name, line number and/or thread ID have to be included in the printed message. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Cc: Greg Banks <gnb@fmeh.org> Cc: Konrad Rzeszutek Wilk <konrad@darnok.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bart Van Assche 提交于
Several functions in <linux/kobject.h> accept printf-style arguments. Some of these functions have been annotated with a format attribute declaration while others have not been annotated. Add a format attribute specification where it is missing. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bart Van Assche 提交于
Since snprintf() may return a value that exceeds its second argument, show() methods should use scnprintf() instead of snprintf(). This patch updates the example in the sysfs documentation accordingly. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bart Van Assche 提交于
Some time ago the way how sysfs stores a pointer to a kobject corresponding to a directory was modified. This patch brings the documentation again in sync with the implementation. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Timur Tabi 提交于
Add text, courtesy of Kay Sievers, that provides some background on device_rename() and why it shouldn't be used. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 2月, 2011 11 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: NFSv4 readdir loses entries NFS: Micro-optimize nfs4_decode_dirent() NFS: Fix an NFS client lockdep issue NFS construct consistent co_ownerid for v4.1 NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount NFS improve pnfs_put_deviceid_cache debug print NFS fix cb_sequence error processing NFS do not find client in NFSv4 pg_authenticate NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!" NFS: Prevent memory allocation failure in nfsacl_encode() NFS: nfsacl_{encode,decode} should return signed integer NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!" NFS: Fix "kernel BUG at fs/aio.c:554!" NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds(). NFS: fix handling of malloc failure during nfs_flush_multi()
-
由 Linus Torvalds 提交于
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: smp_on_up: allow non-ARM SMP processors ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ ARM: initrd: disable initrd if passed address overlaps reserved region ARM: footbridge: fix debug macros ARM: mmci: round down the bytes transferred on error ARM: mmci: complete the transaction on error ARM: 6642/1: mmci: calculate remaining bytes at error correctly
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR arm: omap2: mux: fix compile warning omap1: Simplify use of omap_irq_flags omap2+: Fix unused variable warning for omap_irq_base
-
由 Randy Dunlap 提交于
Fix kernel-doc warning in kernel.h from commit 7ef88ad5 ("BUILD_BUG_ON: make it handle more cases"): Warning(include/linux/kernel.h:605): No description found for parameter 'condition' Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_bmap_add_extent_delay_real should init br_startblock xfs: fix dquot shaker deadlock xfs: handle CIl transaction commit failures correctly xfs: limit extsize to size of AGs and/or MAXEXTLEN xfs: prevent extsize alignment from exceeding maximum extent size xfs: limit extent length for allocation to AG size xfs: speculative delayed allocation uses rounddown_power_of_2 badly xfs: fix efi item leak on forced shutdown xfs: fix log ticket leak on forced shutdown.
-
由 Michael S. Tsirkin 提交于
Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits) usb: gadget: composite: avoid access beyond array max length USB: serial: handle Data Carrier Detect changes USB: gadget: Fix endpoint representation in ci13xxx_udc USB: gadget: Fix error path in ci13xxx_udc gadget probe function usb: pch_udc: Fix the worning log issue at gadget driver remove USB: serial: Updated support for ICOM devices USB: ehci-mxc: add work-around for efika mx/sb bug USB: unbreak ehci-mxc on otg port of i.MX27 drivers: update to pl2303 usb-serial to support Motorola cables USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products USB serial: add missing .usb_driver field in serial drivers USB: ehci-fsl: Fix 'have_sysif_regs' detection USB: g_printer: fix bug in module parameter definitions USB: g_printer: fix bug in unregistration USB: uss720: remove duplicate USB device MAINTAINERS: add ueagle-atm entry USB: EHCI: fix DMA deallocation bug USB: pch_udc: support new device ML7213 IOH usb: pch_udc: Fixed issue which does not work with g_serial usb: set ep_dev async suspend should be later than device_initialize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/serial: fix apbuart build n_hdlc: fix read and write locking serial: unbreak billionton CF card tty: use for_each_console() and WARN() on sysfs failures vt: fix issue when fbcon wants to takeover a second time. Fix up trivial conflict in drivers/tty/tty_io.c
-
由 Russell King 提交于
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: <stable@kernel.org> Reported-and-Tested-by: NStephen Boyd <sboyd@codeaurora.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 1月, 2011 7 次提交
-
-
由 Russell King 提交于
Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: <stable@kernel.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
0ea12930 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/ubi-2.6: Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"
-
由 Dmitry Torokhov 提交于
Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes, but rather return KEY_RESERVED. This fixes breakage with Ubuntu's input-kbd utility that stopped returning full keymaps for remote controls. Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Tested-by: NMark Lord <kernel@teksavvy.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-