- 19 3月, 2015 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "Fix a bug in the ARM XTS implementation that can cause failures in decrypting encrypted disks, and fix is a memory overwrite bug that can cause a crash which can be triggered from userspace" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni - fix memory usage in GCM decryption crypto: arm/aes update NEON AES module to latest OpenSSL version
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching由 Linus Torvalds 提交于
Pull livepatching fix from Jiri Kosina: - fix for potential race with module loading, from Petr Mladek. The race is very unlikely to be seen in real world and has been found by code inspection, but should be fixed for 4.0 anyway. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Fix subtle race with coming and going modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - fixes for pen pen proximity / touch events in wacom driver, from Ping Cheng and Benjamin Tissoires - two new device-specific quirks from Oliver Neukum and Forest Wilkinson * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: check for wacom->shared before following the pointer HID: tivo: enable all buttons on the TiVo Slide Pro remote HID: add ALWAYS_POLL quirk for a Logitech 0xc007 HID: wacom: rely on actual touch down count to decide touch_down HID: wacom: do not send pen events before touch is up/forced out
-
- 18 3月, 2015 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes from all around the place: - a KASLR related revert where we ran out of time to get a fix - this represents a substantial portion of the diffstat, - two FPU fixes, - two x86 platform fixes: an ACPI reduced-hw fix and a NumaChip fix, - an entry code fix, - and a VDSO build fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "x86/mm/ASLR: Propagate base load address calculation" x86/fpu: Drop_fpu() should not assume that tsk equals current x86/fpu: Avoid math_state_restore() without used_math() in __restore_xstate_sig() x86/apic/numachip: Fix sibling map with NumaChip x86/platform, acpi: Bypass legacy PIC and PIT in ACPI hardware reduced mode x86/asm/entry/32: Fix user_mode() misuses x86/vdso: Fix the build on GCC5
-
由 Linus Torvalds 提交于
Merge branches 'perf-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf and timer fixes from Ingo Molnar: "Two small perf fixes: - kernel side context leak fix - tooling crash fix And two clocksource driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix context leak in put_event() perf annotate: Fix fallback to unparsed disassembler line * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: sun5i: Fix setup_irq init sequence clocksource: efm32: Fix a NULL pointer dereference
-
由 Benjamin Tissoires 提交于
486b908d (HID: wacom: do not send pen events before touch is up/forced out) introduces a kernel oops when plugging a tablet without touch. wacom->shared is null for these devices so this leads to a null pointer exception. Change the condition to make it clear that what we need is wacom->shared not NULL. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Linus Torvalds 提交于
Merge tag 'regulator-fix-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The two main fixes here from Javier and Doug both fix issues seen on the Exynos-based ARM Chromebooks with reference counting of GPIO regulators over system suspend. The GPIO enable code didn't properly take account of this case (a full analysis is in Doug's commit log). This is fixed by both fixing the reference counting directly and by making the resume code skip enables it doesn't need to do. We could skip the change in the resume code but it's a very simple change and adds extra robustness against problems in other drivers" * tag 'regulator-fix-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65910: Add missing #include <linux/of.h> regulator: core: Fix enable GPIO reference counting regulator: Only enable disabled regulators on resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap fixes from Mark Brown: "A few things here: - a change from Lars to fix insertion of cache values at the start of rather than end of a rbtree block. This hadn't been noticed before since almost everything lists registers in ascending order. - a fix from Takashi for spurious warnings during cache sync with read once registers, a problem which can be very noticeable on devices that it affects. - a fix from Valentin for a tighening of the oneshot IRQ request interface which would have broken affected devices" * tag 'regmap-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: regcache-rbtree: Fix present bitmap resize regmap: Skip read-only registers in regcache_sync() regmap-irq: set IRQF_ONESHOT flag to ensure IRQ request
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio fixes from Rusty Russell: "Not entirely surprising: the ongoing QEMU work on virtio 1.0 has revealed more minor issues with our virtio 1.0 drivers just introduced in the kernel. (I would normally use my fixes branch for this, but there were a batch of them...)" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_mmio: fix access width for mmio uapi/virtio_scsi: allow overriding CDB/SENSE size virtio_mmio: generation support virtio_rpmsg: set DRIVER_OK before using device 9p/trans_virtio: fix hot-unplug virtio-balloon: do not call blocking ops when !TASK_RUNNING virtio_blk: fix comment for virtio 1.0 virtio_blk: typo fix virtio_balloon: set DRIVER_OK before using device virtio_console: avoid config access from irq virtio_console: init work unconditionally
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Marcelo Tosatti: "KVM bug fixes (ARM and x86)" * git://git.kernel.org/pub/scm/virt/kvm/kvm: arm/arm64: KVM: Keep elrsr/aisr in sync with software model KVM: VMX: Set msr bitmap correctly if vcpu is in guest mode arm/arm64: KVM: fix missing unlock on error in kvm_vgic_create() kvm: x86: i8259: return initialized data on invalid-size read arm64: KVM: Fix outdated comment about VTCR_EL2.PS arm64: KVM: Do not use pgd_index to index stage-2 pgd arm64: KVM: Fix stage-2 PGD allocation to have per-page refcounting kvm: move advertising of KVM_CAP_IRQFD to common code
-
由 Kirill A. Shutemov 提交于
As pointed by recent post[1] on exploiting DRAM physical imperfection, /proc/PID/pagemap exposes sensitive information which can be used to do attacks. This disallows anybody without CAP_SYS_ADMIN to read the pagemap. [1] http://googleprojectzero.blogspot.com/2015/03/exploiting-dram-rowhammer-bug-to-gain.html [ Eventually we might want to do anything more finegrained, but for now this is the simple model. - Linus ] Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: NAndy Lutomirski <luto@amacapital.net> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Seaborn <mseaborn@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 3月, 2015 3 次提交
-
-
由 Petr Mladek 提交于
There is a notifier that handles live patches for coming and going modules. It takes klp_mutex lock to avoid races with coming and going patches but it does not keep the lock all the time. Therefore the following races are possible: 1. The notifier is called sometime in STATE_MODULE_COMING. The module is visible by find_module() in this state all the time. It means that new patch can be registered and enabled even before the notifier is called. It might create wrong order of stacked patches, see below for an example. 2. New patch could still see the module in the GOING state even after the notifier has been called. It will try to initialize the related object structures but the module could disappear at any time. There will stay mess in the structures. It might even cause an invalid memory access. This patch solves the problem by adding a boolean variable into struct module. The value is true after the coming and before the going handler is called. New patches need to be applied when the value is true and they need to ignore the module when the value is false. Note that we need to know state of all modules on the system. The races are related to new patches. Therefore we do not know what modules will get patched. Also note that we could not simply ignore going modules. The code from the module could be called even in the GOING state until mod->exit() finishes. If we start supporting patches with semantic changes between function calls, we need to apply new patches to any still usable code. See below for an example. Finally note that the patch solves only the situation when a new patch is registered. There are no such problems when the patch is being removed. It does not matter who disable the patch first, whether the normal disable_patch() or the module notifier. There is nothing to do once the patch is disabled. Alternative solutions: ====================== + reject new patches when a patched module is coming or going; this is ugly + wait with adding new patch until the module leaves the COMING and GOING states; this might be dangerous and complicated; we would need to release kgr_lock in the middle of the patch registration to avoid a deadlock with the coming and going handlers; also we might need a waitqueue for each module which seems to be even bigger overhead than the boolean + stop modules from entering COMING and GOING states; wait until modules leave these states when they are already there; looks complicated; we would need to ignore the module that asked to stop the others to avoid a deadlock; also it is unclear what to do when two modules asked to stop others and both are in COMING state (situation when two new patches are applied) + always register/enable new patches and fix up the potential mess (registered patches order) in klp_module_init(); this is nasty and prone to regressions in the future development + add another MODULE_STATE where the kallsyms are visible but the module is not used yet; this looks too complex; the module states are checked on "many" locations Example of patch stacking breakage: =================================== The notifier could _not_ _simply_ ignore already initialized module objects. For example, let's have three patches (P1, P2, P3) for functions a() and b() where a() is from vmcore and b() is from a module M. Something like: a() b() P1 a1() b1() P2 a2() b2() P3 a3() b3(3) If you load the module M after all patches are registered and enabled. The ftrace ops for function a() and b() has listed the functions in this order: ops_a->func_stack -> list(a3,a2,a1) ops_b->func_stack -> list(b3,b2,b1) , so the pointer to b3() is the first and will be used. Then you might have the following scenario. Let's start with state when patches P1 and P2 are registered and enabled but the module M is not loaded. Then ftrace ops for b() does not exist. Then we get into the following race: CPU0 CPU1 load_module(M) complete_formation() mod->state = MODULE_STATE_COMING; mutex_unlock(&module_mutex); klp_register_patch(P3); klp_enable_patch(P3); # STATE 1 klp_module_notify(M) klp_module_notify_coming(P1); klp_module_notify_coming(P2); klp_module_notify_coming(P3); # STATE 2 The ftrace ops for a() and b() then looks: STATE1: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b3); STATE2: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b2,b1,b3); therefore, b2() is used for the module but a3() is used for vmcore because they were the last added. Example of the race with going modules: ======================================= CPU0 CPU1 delete_module() #SYSCALL try_stop_module() mod->state = MODULE_STATE_GOING; mutex_unlock(&module_mutex); klp_register_patch() klp_enable_patch() #save place to switch universe b() # from module that is going a() # from core (patched) mod->exit(); Note that the function b() can be called until we call mod->exit(). If we do not apply patch against b() because it is in MODULE_STATE_GOING, it will call patched a() with modified semantic and things might get wrong. [jpoimboe@redhat.com: use one boolean instead of two] Signed-off-by: NPetr Mladek <pmladek@suse.cz> Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Michael S. Tsirkin 提交于
Going over the virtio mmio code, I noticed that it doesn't correctly access modern device config values using "natural" accessors: it uses readb to get/set them byte by byte, while the virtio 1.0 spec explicitly states: 4.2.2.2 Driver Requirements: MMIO Device Register Layout ... The driver MUST only use 32 bit wide and aligned reads and writes to access the control registers described in table 4.1. For the device-specific configuration space, the driver MUST use 8 bit wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and 64 bit wide fields. Borrow code from virtio_pci_modern to do this correctly. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm由 Marcelo Tosatti 提交于
Fixes for KVM/ARM for 4.0-rc5. Fixes page refcounting issues in our Stage-2 page table management code, fixes a missing unlock in a gicv3 error path, and fixes a race that can cause lost interrupts if signals are pending just prior to entering the guest.
-
- 16 3月, 2015 9 次提交
-
-
由 Mark Brown 提交于
Merge remote-tracking branches 'regulator/fix/gpio-enable' and 'regulator/fix/tps65910' into regulator-linus
-
由 Geert Uytterhoeven 提交于
drivers/regulator/tps65910-regulator.c: In function ‘tps65910_parse_dt_reg_data’: drivers/regulator/tps65910-regulator.c:1018: error: implicit declaration of function ‘of_get_child_by_name’ drivers/regulator/tps65910-regulator.c:1018: warning: assignment makes pointer from integer without a cast drivers/regulator/tps65910-regulator.c:1034: error: implicit declaration of function ‘of_node_put’ drivers/regulator/tps65910-regulator.c:1056: error: implicit declaration of function ‘of_property_read_u32’ Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Borislav Petkov 提交于
This reverts commit: f47233c2 ("x86/mm/ASLR: Propagate base load address calculation") The main reason for the revert is that the new boot flag does not work at all currently, and in order to make this work, we need non-trivial changes to the x86 boot code which we didn't manage to get done in time for merging. And even if we did, they would've been too risky so instead of rushing things and break booting 4.1 on boxes left and right, we will be very strict and conservative and will take our time with this to fix and test it properly. Reported-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: H. Peter Anvin <hpa@linux.intel.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20150316100628.GD22995@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fix from Dave Airlie: "An oops snuck in in an -rc3 patch, this fixes it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: [PATCH] drm/mm: Fix support 4 GiB and larger ranges
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clock framework fixes from Michael Turquette: "The clk fixes for 4.0-rc4 comprise three themes. First are the usual driver fixes for new regressions since v3.19. Second are fixes to the common clock divider type caused by recent changes to how we round clock rates. This affects many clock drivers that use this common code. Finally there are fixes for drivers that improperly compared struct clk pointers (drivers must not deref these pointers). While some of these drivers have done this for a long time, this did not cause a problem until we started generating unique struct clk pointers for every consumer. A new function, clk_is_match was introduced to get these drivers working again and they are fixed up to no longer deref the pointers themselves" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: ASoC: kirkwood: fix struct clk pointer comparing ASoC: fsl_spdif: fix struct clk pointer comparing ARM: imx: fix struct clk pointer comparing clk: introduce clk_is_match clk: don't export static symbol clk: divider: fix calculation of initial best divider when rounding to closest clk: divider: fix selection of divider when rounding to closest clk: divider: fix calculation of maximal parent rate for a given divider clk: divider: return real rate instead of divider value clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: Add PLL4 vote clock clk: qcom: lcc-msm8960: Fix PLL rate detection clk: qcom: Fix slimbus n and m val offsets clk: ti: Fix FAPLL parent enable bit handling
-
由 Krzysztof Kolasa 提交于
bad argument if(tmp)... in check_free_hole fix oops: kernel BUG at drivers/gpu/drm/drm_mm.c:305! [airlied: excellent, this was my task for today]. Signed-off-by: NKrzysztof Kolasa <kkolasa@winsoft.pl> Reviewed-by: NChris wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "This is a rather unpleasantly large set of bug fixes for arm-soc, Most of them because of cross-tree dependencies for Exynos where we should have figured out the right path to merge things before the merge window, and then the maintainer being unable to sort things out in time during a business trip. The other changes contained here are the usual collection: MAINTAINERS file updates - Gregory Clement is now a co-maintainer for the legacy Marvell EBU platforms - A MAINTAINERS entry for the Freescale Vybrid platform that was added last year - Matt Porter no longer works as a maintainer on Broadcom SoCs Build-time issues - A compile-time error for at91 - Several minor DT fixes on at91, imx, exynos, socfpga, and omap - The new digicolor platform was not correctly enabled at all Configuration issues - Two defconfig fix for regressions using USB on versatile express and on OMAP3 - Enabling all 8 CPUs on Allwinner/SUNxi - Enabling the new STiH410 platform to be usable Bug fixes in platform code - A missing barrier for socfpga - Fixing LPDDR1 self-refresh mode on at91 - Fixing RTC interrupt numbers on Exynos3250 - Fixing a cache-coherency issues in CPU power-down on Exynos5 - Multiple small OMAP power management fixes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (69 commits) MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs ARM: at91: pm_slowclock: fix the compilation error ARM: at91/dt: fix USB high-speed clock to select UTMI ARM: at91/dt: fix at91 udc compatible strings ARM: at91/dt: declare matrix node as a syscon device ARM: vexpress: update CONFIG_USB_ISP1760 option ARM: digicolor: add the machine directory to Makefile ARM: STi: Add STiH410 SoC support MAINTAINERS: add Freescale Vybrid SoC MAINTAINERS: Remove self as ARM mach-bcm co-maintainer ARM: imx6sl-evk: set swbst_reg as vbus's parent reg ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: OMAP5: fix polling intervals for thermal zones ...
-
git://git.infradead.org/users/jcooper/linux由 Linus Torvalds 提交于
Pull irqchip fixes from Jason Cooper: "armada-370-xp: - Chained per-cpu interrupts gic{,-v3,v3-its}" - Various fixes for safer operation" * tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Support safe initialization irqchip: gicv3-its: Define macros for GITS_CTLR fields irqchip: gicv3-its: Add limitation to page order irqchip: gicv3-its: Use 64KB page as default granule irqchip: gicv3-its: Zero itt before handling to hardware irqchip: gic-v3: Fix out of bounds access to cpu_logical_map irqchip: gic: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID irqchip: gicv3-its: Fix ITS CPU init irqchip: armada-370-xp: Fix chained per-cpu interrupts
-
- 15 3月, 2015 8 次提交
-
-
由 Forest Wilkinson 提交于
The linux kernel has supported the TiVo Slide remote control for some time, but does not recognize the USB ID of the newer Slide Pro. This patch adds the missing data structures so the newer remote will be recognized by the driver, thereby allowing the TiVo, LiveTV, and Thumbs Up/Down buttons to be mapped with a hwdb file. Signed-off-by: NForest Wilkinson <web11.forest@tibit.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jason Cooper 提交于
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Misc i915, vmwgfx and radeon fixes along with a fix for one of those recursive sleep mutex debug cases in the mst code" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix an issue with the device losing its irq line on module unload drm/vmwgfx: Correctly NULLify dma buffer pointer on failure drm/vmwgfx: Reorder device takedown somewhat drm/vmwgfx: Fix a couple of lock dependency violations drm/radeon: drop setting UPLL to sleep mode drm/radeon: fix wait to actually occur after the signaling callback drm/i915: Prevent TLB error on first execution on SNB drm/i915: Do both mt and gen6 style forcewake reset on ivb probe drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again drm/i915: use in_interrupt() not in_irq() to check context drm/mst: fix recursive sleep warning on qlock drm: Don't assign fbs for universal cursor support to files
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fix from James Bottomley: "This is a simple fix for a domain revalidation crash which has recently turned up in the libsas code (applies to mvsas, isc and aic94xx)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: libsas: Fix Kernel Crash in smp_execute_task
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking bugfix from Jeff Layton: "Just a small fix for a potential problem in one of the lease tracepoints" * tag 'locks-v4.0-4' of git://git.samba.org/jlayton/linux: locks: fix generic_delete_lease tracepoint to use victim pointer
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fix from Alex Williamson: "Add missing break to avoid clobbering ioctl (Alexey Kardashevskiy)" * tag 'vfio-v4.0-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEX
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - add TLB invalidation for page table tear-down which was missed when support for CONFIG_HAVE_RCU_TABLE_FREE was added (assuming page table freeing was always deferred) - use UEFI for system and reset poweroff if available - fix asm label placement in relation to the alignment statement * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: put __boot_cpu_mode label after alignment instead of before efi/arm64: use UEFI for system reset and poweroff arm64: Invalidate the TLB corresponding to intermediate page table levels
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "selftests/exec: Check if the syscall exists and bail if not" * tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/exec: Check if the syscall exists and bail if not
-
- 14 3月, 2015 9 次提交
-
-
由 Jeff Layton 提交于
It's possible that "fl" won't point at a valid lock at this point, so use "victim" instead which is either a valid lock or NULL. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Christoffer Dall 提交于
There is an interesting bug in the vgic code, which manifests itself when the KVM run loop has a signal pending or needs a vmid generation rollover after having disabled interrupts but before actually switching to the guest. In this case, we flush the vgic as usual, but we sync back the vgic state and exit to userspace before entering the guest. The consequence is that we will be syncing the list registers back to the software model using the GICH_ELRSR and GICH_EISR from the last execution of the guest, potentially overwriting a list register containing an interrupt. This showed up during migration testing where we would capture a state where the VM has masked the arch timer but there were no interrupts, resulting in a hung test. Cc: Marc Zyngier <marc.zyngier@arm.com> Reported-by: NAlex Bennee <alex.bennee@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Ard Biesheuvel 提交于
Another one for the big head.S spring cleaning: the label should be after the .align or it may point to the padding. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ard Biesheuvel 提交于
If UEFI Runtime Services are available, they are preferred over direct PSCI calls or other methods to reset the system. For the reset case, we need to hook into machine_restart(), as the arm_pm_restart function pointer may be overwritten by modules. Tested-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The ARM architecture allows the caching of intermediate page table levels and page table freeing requires a sequence like: pmd_clear() TLB invalidation pte page freeing With commit 5e5f6dc1 (arm64: mm: enable HAVE_RCU_TABLE_FREE logic), the page table freeing batching was moved from tlb_remove_page() to tlb_remove_table(). The former takes care of TLB invalidation as this is also shared with pte clearing and page cache page freeing. The latter, however, does not invalidate the TLBs for intermediate page table levels as it probably relies on the architecture code to do it if required. When the mm->mm_users < 2, tlb_remove_table() does not do any batching and page table pages are freed before tlb_finish_mmu() which performs the actual TLB invalidation. This patch introduces __tlb_flush_pgtable() for arm64 and calls it from the {pte,pmd,pud}_free_tlb() directly without relying on deferred page table freeing. Fixes: 5e5f6dc1 arm64: mm: enable HAVE_RCU_TABLE_FREE logic Reported-by: NJon Masters <jcm@redhat.com> Tested-by: NJon Masters <jcm@redhat.com> Tested-by: NSteve Capper <steve.capper@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "Just two fixes, one for an ACPI LPSS driver issue introduced during the 3.17 cycle and one revert of a recent commit that sort of broke the cpupower tool. Specifics: - Fix an ACPI LPSS (Low-Power Subsystem) driver issue causing the 8250_dw driver to confuse an LPSS clock with another one it is supposed to handle due to the lack of identification allowing it to tell those clocks apart (Heikki Krogerus). - Revert a recent commit that was supposed to improve the usability of the cpupower tool, but clearly did the opposite (Josh Boyer)" * tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpupower Makefile change to help run the tool without 'make install'" ACPI / LPSS: provide con_id for the clkdev
-
由 Gregory CLEMENT 提交于
I will also take care of the legacy support(not fully converted to DT) of the mvebu SoCs. Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NJason Cooper <jason@lakedaemon.net> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rafael J. Wysocki 提交于
* pm-tools: Revert "cpupower Makefile change to help run the tool without 'make install'"
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen bug fixes from David Vrabel: - fix a PV regression in 3.19. - fix a dom0 crash on hosts with large numbers of PIRQs. - prevent pcifront from disabling memory or I/O port access, which may trigger host crashes. * tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: limit guest control of command register xen/events: avoid NULL pointer dereference in dom0 on large machines xen: Remove trailing semicolon from xenbus_register_frontend() definition x86/xen: correct bug in p2m list initialization
-