- 30 6月, 2015 1 次提交
-
-
由 Sebastian Ott 提交于
Fix this compile error: drivers/built-in.o: In function `arc_ps2_probe': /mnt/linux/drivers/input/serio/arc_ps2.c:206: undefined reference to `devm_ioremap_resource' Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 1月, 2015 1 次提交
-
-
由 Vishnu Patekar 提交于
This driver implements support for PS2 controller found on Allwinner A10, A20 SOCs. It has been tested on A20 Olimex-Lime2 board and also on A10. Signed-off-by: NVishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 3月, 2014 1 次提交
-
-
由 Jean Delvare 提交于
I don't think the OLPC AP-SP driver is generally useful without OLPC support. So make it depend on OLPC, unless build testing is enabled. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 03 1月, 2014 1 次提交
-
-
由 Mark Salter 提交于
Remove messy dependencies from SERIO_I8042 by having it depend on one Kconfig symbol (ARCH_MIGHT_HAVE_PC_SERIO) and having architectures which need it select ARCH_MIGHT_HAVE_PC_SERIO in arch/*/Kconfig. New architectures are unlikely to need SERIO_I8042, so this avoids having an ever growing list of architectures to exclude. Signed-off-by: NMark Salter <msalter@redhat.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 31 10月, 2013 1 次提交
-
-
由 Tom Gundersen 提交于
There is plenty of consumer hardware (e.g., mac books) that does not use AT keyboards or PS/2 mice. It therefore makes sense for distro kernels to build the related drivers as modules to avoid loading them on hardware that does not need them. As such, these options should no longer be protected by EXPERT. Moreover, building these drivers as modules gets rid of the following ugly error during boot: [ 2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.439537] i8042: No controller found Signed-off-by: NTom Gundersen <teg@jklm.no> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 25 9月, 2013 1 次提交
-
-
由 Linus Walleij 提交于
Delete the configuration option for the Shark machine from the i8042 Kconfig, as the machine is deleted from the kernel. Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 19 9月, 2013 1 次提交
-
-
由 K. Y. Srinivasan 提交于
Add a new driver to support synthetic keyboard. On the next generation Hyper-V guest firmware, many legacy devices will not be emulated and this driver will be required. I would like to thank Vojtech Pavlik <vojtech@suse.cz> for helping me with the details of the AT keyboard driver. I would also like to thank Dan Carpenter <dan.carpenter@oracle.com> and Dmitry Torokhov <dmitry.torokhov@gmail.com> for their detailed review of this driver. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 13 9月, 2013 1 次提交
-
-
由 Martin Schwidefsky 提交于
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 8月, 2013 1 次提交
-
-
由 Mischa Jonker 提交于
It causes crashes when enabled, and we don't have such a peripheral anyway on ARC platforms. Signed-off-by: NMischa Jonker <mjonker@synopsys.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 01 7月, 2013 1 次提交
-
-
由 Daniel Drake 提交于
The OLPC XO-1.75 and XO-4 laptops include a PS/2 touchpad and an AT keyboard, yet they do not have a hardware PS/2 controller. Instead, a firmware runs on a dedicated core ("Security Processor", part of the SoC) that acts as a PS/2 controller through bit-banging. Communication between the main cpu (Application Processor) and the Security Processor happens via a standard command mechanism implemented by the SoC. Add a driver for this interface to enable keyboard/mouse input on this platform. Original author: Saadia Baloch Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 6月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
Several drivers don't build on s390 with CONFIG_PCI disabled as they require MMIO functions. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org # 3.9 Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 3月, 2013 1 次提交
-
-
由 Daniel Hellstrom 提交于
APBPS2 is a PS/2 core part of GRLIB found in SPARC32/LEON products. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 2月, 2013 1 次提交
-
-
由 Heiko Carstens 提交于
Just add s390 to the list of architectures that don't want this driver. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 2月, 2013 2 次提交
-
-
由 Heiko Carstens 提交于
When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 07 2月, 2013 1 次提交
-
-
由 Joe Millenbach 提交于
Backing out changes made in earlier TTY removal patch. Switched to only one dependency in SERPORT on TTY instead of many incorrect dependencies. Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com> Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 1月, 2013 1 次提交
-
-
由 Joe Millenbach 提交于
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com> Reviewed-by: NJamey Sharp <jamey@minilop.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 10月, 2012 1 次提交
-
-
由 Mischa Jonker 提交于
This adds support for the PS/2 block that is used in various ARC FPGA platforms. Signed-off-by: NMischa Jonker <mischa.jonker@synopsys.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 21 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 12月, 2010 1 次提交
-
-
由 Janusz Krzysztofik 提交于
This patches removes a config option that was used to select a FIQ handler to be build for Amstrad Delta, as required by the on-board serio interface driver. Not having any problem reports received since it was introduced in 2.6.35, the FIQ handler can now be built and initialized by default, thus reqiring no extra config option. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 03 11月, 2010 1 次提交
-
-
由 Michael Witten 提交于
Signed-off-by: NMichael Witten <mfwitten@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 10月, 2010 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
PS2Mult is a simple serial protocol used for multiplexing several PS/2 streams into one serial data stream. It's used e.g. on TQM85xx series of boards. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 08 7月, 2010 1 次提交
-
-
由 Feng Tang 提交于
This reverts commit 0b28bac5. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NFeng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-5-git-send-email-feng.tang@intel.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 23 6月, 2010 1 次提交
-
-
由 Randy Dunlap 提交于
Some of the recent X86_MRST additions make some "select"s conditional on X86_MRST but missed some related kconfig symbols, causing: drivers/built-in.o: In function `ps2_end_command': (.text+0x257ab2): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_end_command': (.text+0x257ae1): undefined reference to `i8042_unlock_chip' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b40): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b6f): undefined reference to `i8042_lock_chip' when SERIO_I8042=m, SERIO_LIBPS2=y, KEYBOARD_ATKBD=y. We need to make i8042 dependant upon !X86_MRST and allow deselecting atkbd on Moorestown even when !CONFIG_EMBEDDED. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 25 5月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
The sh64 cayman platform is the only sh board that ships with an i8042, so we just hide it for all of the others. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 5月, 2010 1 次提交
-
-
由 Janusz Krzysztofik 提交于
The patch introduces a serio driver that supports a keyboard serial port found on the Amstrad Delta videophone board. After initializing the hardware, the driver reads its input data from a buffer filled in by the board FIQ (Fast Interrupt Request) handler. Standard AT keyboard driver (atkbd) will be used on top of the serio layer for handling the E3 keyboard (called mailboard) connected to the port. Since the device generated scancodes differ from what the atkbd expects, a custom key code to scan code table must be loaded from userspace for the keyboard to be useable. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 13 10月, 2009 1 次提交
-
-
由 Thomas Chou 提交于
This patch adds a new SERIO driver to support the Altera University Program PS/2 controller. [dtor@mail.ru: assorted cleanups] Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 06 10月, 2009 1 次提交
-
-
由 Dmitry Torokhov 提交于
libps2 can not be built in if i8042 is a module, all other combinations are allowed. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 5月, 2009 1 次提交
-
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 27 11月, 2008 1 次提交
-
-
由 Russell King 提交于
The CLPS7500 platform has not built since 2.6.22-git7 and there seems to be no interest in fixing it. So, remove the platform support. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 7月, 2008 1 次提交
-
-
由 John Linn 提交于
Added a new driver for Xilinx XPS PS2 IP. This driver is a flat driver to better match the Linux driver pattern. Signed-off-by: NSadanand <sadanan@xilinx.com> Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 4月, 2008 1 次提交
-
-
由 Hans-Christian Egtvedt 提交于
Add support for the PSIF peripheral on AVR32 AP7 devices. It is implemented as a serio driver and will behave like a serio 8042 device. The driver has been tested with a Dell keyboard capable of running on 3.3 volts and a Logitech mouse on the STK1000 + STK1002 starter kit. The Logitech mouse was hacked by cutting the cord and using a bi-directional voltage converter to get the required 5 volt I/O level. For more information about the PSIF module, see the datasheet for AT32AP700X at http://www.atmel.com/dyn/products/datasheets.asp?family_id=682Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 23 11月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 24 7月, 2007 1 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 10 10月, 2006 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Enable HIL configuration options on HP300 Signed-off-by: NKars de Jong <jongk@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 1 次提交
-
-
由 Matt LaPlante 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 11 7月, 2005 1 次提交
-
-
由 Neil Brown 提交于
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-