- 12 7月, 2014 40 次提交
-
-
由 Greg Kroah-Hartman 提交于
Remove large commented out section for compatibility stuff that will never be needed again. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
It was just includeing bitops.h so do that instead in the one place that was calling it. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
There are only 2 functions that are actually called from it, so move it to the local place where it is needed, no need for it to be "global" for the rest of lustre to see it. Also remove the unneeded EXPORT_SYMBOL() markings for these functions, as no one else calls them. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
It did nothing, so remove it. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Just call filep_open(), no need to rename the thing. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
It's a "file" structure, so use it instead of trying to rename it. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
It's a 'dentry', so use it instead of something else. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
The file was empty, remove it as it wasn't doing anything. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Found by the checkpatch.pl tool Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Found by the checkpatch.pl tool Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
The gss code has never been built, there is no Kconfig option for it, so delete it as code that can not build goes bad really fast. If someone wants it back, they can revert this and fix any build errors that might be in it. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Fix up the relative paths in the .c files to properly build with the Makefile change. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Also fix up the relative paths in the .c files to properly build now Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Also fix up the relative paths in the .c files to properly build now Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
In drivers/staging/lustre/lustre/include there was a bunch of .h files relying on ccflags to be set up right. Make all of them proper relative paths so that ccflags for different subdirs can be now removed. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
There were two paths being added, yet only one was needed. Remove both, and fix up the 3 .c files to point to the location of the needed .h file. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
The lnet code did not even need the cflags setting in the Makefile, so remove it, as it is not doing anything at all. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
We need to remove the ccflags from the Lustre code as it prevents individual object files from building properly in the kernel build system. It also hids the horrid mess that the Lustre include files are made up of. Start out by removing the toplevel ccflags variable pointing to drivers/staging/lustre/include/ as a valid include path. This requires the absolute include markings of a bunch of .h and .c files, which is also done here. Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: hpdd-discuss <hpdd-discuss@lists.01.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
whitespace changes only - git diff -w shows no difference Cc: Joe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
whitespace changes only - git diff -w shows no difference Cc: Joe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Cc: Joe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
whitespace changes only - git diff -w shows no difference Cc: Joe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
whitespace changes only - git diff -w shows no difference Cc: Joe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andrey Utkin 提交于
The issue was discovered with static analysis and has two instances in this file. The code looks like this if (x < 65536000) { ... } else if (x < 655360000) { ... } else if (x <= 0xffffffff /* 6553600000 */) { ... } else if (x <= 0xffffffff /* 65536000000 */) { ... } The meaning of this block is to select appropriate clock frequency for interval timer basing on "x", which is amount of time. Notes: 1. That last condition matches previous one - that's the issue. 2. Decimal numbers in comments don't match hex numbers in expressions. But in first case the numbers have same order, while in the second case the hex number is the same, and the decimal one is 10 times bigger. 3. Actually type of "x" is "unsigned int", so its exact upper limit is not obviously known. 4. There's no "else" block. So it makes sense to make an "else" block from last "else if" case. The code inside the block seems correct for such usage. [ Actually, get rid of the final "else if" case and change the next-to-last "else if" case to an "else" as the upper limit of "x" _is_ known to be 0xffffffff (UINT_MAX), which is less than 6553600000 -- Ian ] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79871Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NAndrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
s->maxdata for the do subdevice should be 1, however currently it is being set to 0xffffffff. Fix this. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
There is no need to test whether devpriv is null in this function. The check looks left over and we can just remove it. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
The dev->board_name is now initialized by the comedi core before calling the(*attach) or (*auto_attach) function in a driver. As long as the driver does no additional probing, it's no longer necessary initialize the board_name. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chase Southwood 提交于
This value is only needed for subdevices that support async commands. The comedi core will default the value to 1 when it is not initialized. Signed-off-by: NChase Southwood <chase.southwood@gmail.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
patch 'vnt_set_keymode don't save pairwise key entry' caused a slight regression in access point mode Only don't save in station mode. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
The default is that all the channels are enabled for rf types not mentioned here. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Daeseok Youn 提交于
Adds "Daeseok Youn" to maintainers list for dgap driver. Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com> Suggested-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-